Three iPods to be used for different collections by same owner

Hi.
I'm the happy owner of three iPods: an older iPod (maybe second or third gen 40 GB), a Nano, and the newer Video. I'd like to reset all of them to factory reset - erase all content and associations. Then, I'd like to reset iTune's knowledge of them.
I would like to create different subsets of my music from iTunes so I can use them for different purposes. They have different capabilities (storage limits, video, etc.) so this will help me optimize their features as well.
Does somebody know how to do these things?
Thanks.
aps.
Aluminum 1.67, MacMini, Quicksilver, iBook, 3xPowerbook   Mac OS X (10.4.4)   Former UNIX kernel hacker.

After some more research, I developed the answer I was looking for. Essentially, use the iPod updater to reset the iPod. Sometimes, you have to quit iTunes when it is updating, even if it is in the middle of updating. Then after reseting the iPod with the iPod updater, when iTunes starts, assign unique names to each iPod.

Similar Messages

  • Insert, search, delete performance overhead for different collections

    Hi,
    I am trying to create a table which compares performance overheads for different collections data structures. Does anyone want to help me out? I want to put a number from 1 - 9 in each of the question marks. 1 being very poor performance and 9 being very good performance (the reason I am doing this is that I had this question in a job interview test and I didn't pass it)
    anyone have any comments?
              Searching     Inserting     Deleting     
    ArrayList ? ? ?
    LinkedList ? ? ?
    TreeSet ? ? ?
    TreeMap ? ? ?
    HashMap ? ? ?
    HashSet ? ? ?
    Stack ? ? ?

    sorry the formatting has screwed up a bit when I posted it. It should have a list of the collection types and three columns (inserting, deleting, searching)

  • Are the Tcodes which we use for work flow are same in ecc and crm

    Are the Tcodes which we use for work flow are same in ecc and crm

    Yes they are! the same enjoy!
    Regards
    Tatenda I H Chaibva!

  • Why is my iPod touch repeatedly asking for different iTunes account passwords?

    Does anyone know why my iPod Touch keeps asking for 5 different iTunes account passwords? Also, in the iTunes app it says I have 651 songs preparing to download, and I didnt tell it to download them. Does anyone know why this keeps happening? It only began after I reset my iPod.

    I have this problem too. I'm trying to restore an iPod and it asks me for account numbers. Is there Anyway to get around it? Cause it does not seem fair if I can have and listen to it on my iTunes but not my iPod. The one account is from a girl who litteraly went mentally insane, I'm not going to be asking for her password EvER. And the other is An ex friend and I don't even know who the third account is! This is really not fair and sooooo annoying. It won't put on alll my other music without these passwords. There has to be a fix for this. I can't even use my iPod and get music on it!

  • Can ipod music be used for ringtones

    was wondering if my ipod music can be used for my ringtones if tried everything i can think of but i havent been able to do i need to download seperate ringtones

    Don't be a child. The person answered your question and gave you good advice. You don't need to drag your manual with you, but you could have searched the forum and you would have found your answer, and it probably would have taken less time that to post another redundant question.
    People like the ones here who are nice enough to answer your questions should be thanked, not yelled at by someone who can't even take the time to try to find an answer before asking a dumb question.

  • Can earphone for ipod touch be used for ipad 1?

    Can earpiece for ipod touch be used on ipad 1?

    Yes. All of the apple earbuds work, and virtually any othernearphone with the same size jack.  Note, the plug can be snug.  Dont be shy about pushing it in.

  • What can a iPod touch be used for

    I already have an ipad and MacBook Air but I liked the iPod touch what can it be used for

    It is basically just a small iPad. A lot easy to carry and play/listent to music and other media.

  • Same WAD Template to be used for different queries and dataprovider

    Hi All,
    I want to create a WAD template that cound be use by 100 more queries.
    Making setting in SPRO or RSCUSTV27 will make it a default template for all the queries.
    I only want the template to be used for say MM module(100 queries).
    Any way it can be done?
    Please help.
    Thanks
    Vinay

    Hi Vin Loh,
    I assume your requirement as this:
    Case 1: You have N querie(s) on several infoproviders in your case MM module, and that you would like to display all the queries in a single WAD report? You can do it! Its a feasible solution.
    Goto WAD > Insert a 2 X 2 table > In the (1,1) box insert a drop down box. In the (1,2) You may add a Title of type 'Text' > In the (2,1) box you may add a 'Navigational Pane' > In the (2,2) cell add the 'Analysis Grid' > Create a Dataprovider DP_1 referencing any frequently accessed query. As of now a template has been created, which can be modified as accordance to suit your requirements.
    Now, once done, goto the dropdown box settings. This DDBox's main objective is to give you acess to all the N queries in your MM module. Goto 'Web Item Params' > Choose the 'Data Binding' option > Edit Parameter > In the 'Data Binding Type' choose 'QUERY VIEW' > Goto the 'Selection of Query Views' > Check the option 'Specify List of Query Views' > Under 'Single Entry in DD...' choose Initial State as QUERY; Not QUERYVIEWS > Choose your N queries as listed here. No need to create N different DPs or N different reports.
    Here, your iView is of type ..TEMPLATE=ZTEST.. for WAD based reports; not ..QUERY=ZTEST...
    Guess it will resolve your issue.
    Case 2: You wish to create a BEx template for all your existing MM queries as run on BEx Web based analyzer? In this case you need to check on the KM config. In the portal you have the Imported iViews templates.
    Thanks,
    Arun Bala

  • Managing DCs in NWDI for different releases in same Client Project

    Hi all,
    We are working for a client and as part of the first phase of the project, we have developed Portal applications for one geography of the world. Currently maintenance and support for this phase 1 is going on. At the same time, phase 2 of the project has started for a different geography of the world. For this phase, the same Portal applications are going to be used along with enhancements.
    My query is how should we manage these DCs at the same time for:
    1) doing enhancements as part of Phase 1 support work; and
    2) enhancements for Phase 2 new requirements
    We cannot put hold on the Phase 1 support enhancements till the Phase 2 goes live. I understand that we would have to create a copy of the current DCs for development in Phase 2. So my first question is can the DCs from one track be copied (exactly) to another track in NWDI? If yes, how?
    Once we have done this, we are still confused about how to merge these two parallel developments going on when the right time comes (i.e. Go Live for Phase 2). Please advise on this as well.
    Thanks in advance.
    Regards,
    Ankur

    Hi,
    This one is also very good and complete:
    Blog
    [/people/guenter.schiele/blog/2005/12/21/best-practices-for-running-the-nwdi|/people/guenter.schiele/blog/2005/12/21/best-practices-for-running-the-nwdi]
    Application Maintenance
    [http://help.sap.com/saphelp_nw04s/helpdata/en/ba/2e61fda9764a29833ddc41feb4e113/content.htm|http://help.sap.com/saphelp_nw04s/helpdata/en/ba/2e61fda9764a29833ddc41feb4e113/content.htm]

  • Ldt files for different templates have same data

    i was asked to get .ldt files for different templates. I used FNDLOAD to download the files using xdotmpl.lct file. all the .ldt file when open in text has the same data. Am I doing something wrong. If the files are same why do we need seperate .ldt file for each template.

    But if you developing something and you are going to version it, then
    In case of single LDT
    ==================
    Its easy as you said, we can down load all def into one file.
    But, if one of the template def. got changed, all data gets downloaded unnecessarily .
    Single file , so you can say its easy .
    In case of multiple LDT
    ==================
    But, if one of the template def. got changed, then download that one only into ldt.
    Multiple file , little more effort is needed to create them.
    But more easy to maintain,

  • RFC Destinations for different clients on same host

    Hi
    I have an SRM and SUS on the same server and the clients are different. I have a flow from SRM to SUS and also back from SUS from SRM.
    Do I have to create seperate RFC Destinations for different clients?
    What about the other details likePort, Partner Profile, Logical system etc, do we have to maintain all for both of them seperately ?
    Regards
    Ajith

    Hi Ajith,
    Do I have to create seperate RFC Destinations for different clients?
    >>> A set of RFC Destination, Port & Parnter Profile is used to connect two systems between one client of source system to one client of Target system. Eg. from clinet 100 of XXX system to clinet 100 of YYY system. So, you need to take this into account and create seperate RFC destination for each different pair of connections.
    What about the other details likePort, Partner Profile, Logical system etc, do we have to maintain all for both of them seperately ?
    >>>In PI, you need to create BS for each different client of SRM & SUS system.
    I hope this helps.
    Regards, Gaurav.

  • Sharing files for different users on same computer without duplicating

    Newbie here, I got my 1st mac (in ten years) last week and have been really enjoying it. I set up 3 user's accounts and wanted to share files such as iphoto and itune for all users. So I put my pictures in the shared folder, however, when I opened iphoto in each user's account, I had to import all the photos for every user, which resulted in duplicated files on each user's folders. I have tens of thousands of photos and don't want redundant files eat up my hard drive space. For this reason I'm holding off sharing my itune files.
    I'm wondering if there's a way to allow access for different users without making duplicates.
    20 in. imac   Mac OS X (10.4.8)  

    ewrspotter
    Preferably only admin can edit/import
    Well this makes things very easy and is the way that iPhoto is intended to share. In your Admin account, go to iPhoto -> Preferences -> Sharing and enable Sharing. Note that you can share an entire library or just individual albums. Leave iPhoto running and use Fast-User Switching to move to the other Account(s). In Launch iPhoto and go to Preferences -> Sharing and enable 'Look for Shared Photos'. The main library will turn up in the Source (or left-hand) pane of the other iPhoto.
    Remember that for this to work, the Admin account must be logged in and iPhoto must be running there.
    I don't really care as long as there's no redundant files.
    Define 'redundant'. You do realise that iPhoto is a database, with built-in image viewer, lightweight editor and version control. Version control means that if you modify a photo then iPhoto makes a copy, including the changes, and keeps the Original. This way you can always Revert to Original from the Photos menu. Many people switching to iPhoto are confused by this at first. If you don't want version control I strongly suggest using a different app. There a many, many image viewers for the Mac.
    As to your point comment about One-Touch DVD. I'm not familiar with that piece of Software, but every DVD (and CD) that you burn is assembled on the HD first, then burned. That assembly is a cache file and should be trashed on completion.
    As to disk space: you need to keep about 10 gigs of space on the Start-Up disk for Virtual memory, Temp files and other OS uses. If you do get an external at some point in the future it is possible to run both iPhoto and iTunes from it to free up space on the internal. Just check the help or post back to the relevant forum before moving them. It's not difficult, but there is a procedure that needs to be followed.
    Regards
    TD

  • Seperate server log for different projects on same domain

    Hi All,
    Could someone help me initiate code to seperate server log of domain for different projects running on the domain.
    For example, If I have two projects 1,2 in the same domain, then I should get two server log files for each project.
    Regards,
    SunnyPhani

    iCal Server sends invitations to internal users too if you remove the email addresses of your internal users under "Info" in Workgroup Manager.
    So the Open Directory does not have an entry for the users with your internal domain, which makes iCal Server see the user as an external one.

  • Teststand deployment utility used for different versions of TestStand

    I am in a situation where I developed a test sequence in TestStand 3.5 and used the deployment utility to deliver an installer to a customer with TestStand 2010 Base deployment Engine.  We are seeing the following error "This installer installs file to the TestStand directory.  You must first install TestStand or the TestStand runtime engine version 3.5 to create the TestStand directory."
    My question becomes, is it even possible to make an installer with TestStand 3.5 and have someone else use with TestStand 2010 Base deployment engine?  What then needs to happen to get past the error if it is possible?
    Thanks,
    Bill
    John 3:16

    No you cannot use 3.5 sequences on the 2010 engine.
    You need to install the 3.5 engine on that machine.  The license will still work and you will need to use the version selector to go between the two.  You can include the engine in your installer build.
    TestStand is a scripting language.  Because sequence files are not compiled it is possible to use unsupported functions on the wrong version.  Therefore, the engine just won't run other versions.  Also, you need to switch versions because they use different adapters, engines, dlls, folders, etc...  The version selector changes settings on your machine for all those things for that version.
    Hope this helps,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

  • Can an iPod touch be used for streaming via wifi from iTunes ?

    Hi,
    I suspect the answer is 'No' but I'd love someone to tell me otherwise.
    Thanks
    -Mat

    You can also use Tversity to stream audio and video content from your PC to the iPhone or iPod Touch.
    http://tversity.com/home
    There are some crippling limitations, however:
    1) It appears that right now, all videos need to be transcoded to iPod format before they can stream. And unlike streaming via the Xbox or other devices, the transcoding has to completely finish before you can stream the video, whereas other devices allow you to transcode and stream on the fly.
    2) There doesn't appear to be a way to shuffle music or use playlists. So if you stream music, you can only play one song and then use the interface to select another... it won't keep playing from a playlist or automatically go to another song.
    I can confirm, however, that the streaming does indeed work with the iPod Touch, not just the iPhone. I tried it myself and it worked, but the limitations above make it impractical for me to use regularly. Perhaps the folks at Tversity will be able to add more features over time.

Maybe you are looking for