Three Key Tips for Successful IT Implementation

Implementing a new service into business is never an easy endeavor, follow this advice for successful IT Implementation. 
This topic first appeared in the Spiceworks Community

distractiboy wrote:
I won't lie, but I could just not even bring it up as an issue. The compass in particular seems to be a real defect, and one that genuinely bothers me. Bringing up the screen might just complicate things. It's not like I'd be hiding anything — the thing that bothers me should be evident just from their handling of it.
Honestly, I don't think the screen issue is going to matter. The fact that the compass doesn't work right is a biggie. Just make sure it's a real issue, and it's not something else.
However, I hope there's a lesson learned on cleaning your screen. I use a dry, lint-free cloth.

Similar Messages

  • Apple Mail & Gmail IMAP: Any tips for success?

    Hello all.
    Is anyone having a lot of success with using Apple Mail with Gmail IMAP? I've followed all the directions, and things work pretty well for a while ... but inevitably, after a few days, Mail seems to stop working entirely.
    I can delete Gmail account on Mail and start over again ... but, if I have to keep doing that, what's the point?
    The problems usually begin when I ask Apple Mail to open the Gmail All Mail folder. It starts opening the mail -- and never stops. I have to do a lot of force quitting.
    What have other people been experiencing? What tips can people share? I'd like to get everything working properly.

    I think GMail's IMAP support is just extremely slow. For now I'm still using POP on my computers and IMAP for phone access only. Hopefully it will speed up soon enough.
    But the problems you're experiencing aren't unique to you. I'm not sure there's anything you can do, and I don't know that it's a Mac specific problem?

  • General Tips for Success with ePrint

    I just wanted to impart some of my knowledge on sending successful ePrint Jobs to the printer. Keeping the following items in mind when using ePrint will improve your success rates of sending jobs to the printer.
    ePrint Supported File Types are the Following
    •Microsoft Word
    •Microsoft Power Point
    •Microsoft Excel*
    •Text files (txt)
    •PDF
    •HTML
    •Images (bmp, jpg, png, gif, tiff) These image files need to be at least 100 DPI in order  
       to print via ePrint
    * It is suggested that one preview the documents in Excel before printing.
    Email Clients that are common and that work with ePrint
    Outlook 2003 and 2007’
    Hotmail
    Yahoo!
    Gmail
    Blackberry mail client
    Apple Mail
    This is not a complete list of email providers that work with ePrint. Rather, this is a list of known clients that have not had any troubles with ePrint thus far.  This is not to say that other email clients won’t work. This is more of a “go to” list or a source to get an Alternative email if you find yourself having difficulty emailing the printer and you want another email client to try to send from.
    Also, when sending ePrint jobs to the printer; make sure to limit the number of attachments to ten at a time.  The email body and the attachments cannot exceed 10MB.  If these limits are not followed that will cause the job to fail. Also if a job is declined as spam, Try turning off the signature on your email if it is elaborate as that has caused issues in the past. 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?
    This question was solved.
    View Solution.

    Happy Printing! 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • I have a Macbook Pro 15" that is three and a half years old.  Although it has slowed a bit, it still runs well and runs every program I need. Any tips for how to keep this old computer running well and in good health?

    I have a Macbook Pro 15" that is three and a half years old.  Although it has slowed a bit, it still runs well and runs every program I need. Any tips for how to keep this old computer running well and in good health?
    I have a 250 gig drive and try to keep at least 100 gigs unused at all times, 4 GB 667 MHz DDR2 SDRAM memory, back up with Time Machine and CrashPlan, and have OS X 10.7.3.
    This was my first Mac since an old Apple II GS.  After that I used PC's and got really good at reformatting, replacing drives, reinstalling, defragging, resolving software conflicts, etc.  Since switching back to Macs (five in my extended family now), I haven't had to do any of those things. So, although, the cost is three times as much, the aggrevation has been ten times less.
    I'm retired and living on a fixed income and would therefore like to keep this computer running as opposed to constatntly upgrading.
    That said, any tips?
    Thanks
    It does have a crack on the left of the screen case about 3/4'' up from the bottom.  I've posted that as another question.

    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility.  For situations DU cannot handle the best third-party utilities are: Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior.  Versions 1.5.1 and later are Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
    I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    SuperDuper!
    SyncTwoFolders
    Synk Pro
    Synk Standard
    Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Adding more RAM, if feasible, and a new, faster hard drive may also help pep it up a little.

  • Is there an easier way to make a simple split in imovie than using THREE keys (shift-control-S)?  I make hundreds of cuts in my time-lapse videos. Other programs have a button for this.  Why so hard?

    Sorry, any other shortcut to splitting would be appreciated.

    danmonsterman wrote:
    …  I'm new to imovie.  It surprises me that it requires three keys …
    for good reason - 'splitting' a clip is in normal editing in iMovie rarely used.
    < your voice: > "Wot?!"
    I emphazised 'in iMovie', 'cause it has a very different concept, compared to other NLEs, such as Premiere, Avid, legacy FC/p7 (or Magix etc on Windows):
    spend some time here
    http://help.apple.com/imovie/
    (not only the videos, read the tutorials too)
    usually, you just drag the yellow box across the 'wanted' part of a clip and than add it to the Project Line.
    no split, no cut, no in/out (imagine, how many keys would need that?)....
    maybe frightening - but believe me: dead simple, super fast.
    splitting a clip? hmmm… when/why?
    … when you apply diff. effects to one single 'scene' - comes to my mind as only situation I use split in iM.
    plus, many NLEs ask for 'finger acrobatics' - I try to learn FCPX for now two years, and still have to cheat what key-combos results what feature lucky me, I found a solution controlling the basics single-handed with gestures on my Magic Trackpad …

  • Please can somebody help, my imac will not start up, just chimes, apple sign then spinning cog. I have tried many key codes, no success, would really like to talk to someone.

    please can somebody help, my imac will not start up, just chimes, apple sign then spinning cog. I have tried many key codes, no success, would really like to talk to someone.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing ' ' 1274181950 464843899 1233118628 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • 15" i7 Macbook Pro from early 2011.takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get

    Hello All,
    I have a 15" i7 Macbook Pro from early 2011. The past few weeks, it has been getting increasingly difficult to get on my computer. It takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get to the dark gray log-in screen. Even when I finally get logged in to start working, thinking it would be okay now, it shuts down randomly.
    I've ruled out the possibility of a software problem because I've just done a clean re-install of Mac OS X Mavericks on my computer just yesterday.
    I did upgrade the RAM recently, about a month and a half ago, from 4GB to 16GB, I went to the apple store four days after that upgrade to have them do a hardware test, and clean the inside of my laptop, which helped with previous heat issues. When they did the hardware test, the hardware was all registered as fine from their system.
    I've tried resetting the SMC, PRAM, and doing the internet recovery hardware test, but to no avail. I thought I could at least find out what parts needed to be replaced from the hardware test but it seems that when the hardware test is almost finished, the computer just shuts down, So I am unable to see the results.
    My computer is also having battery issues, under battery condition, it says "replace now," parts have been ordered, waiting for arrival. But if the battery health is low, it should still boot up fine, it would just hold a significantly less charge.
    Could this be a hard drive issue?
    Has anyone had similar symptoms and how was it resolved?
    Does anyone know what I can do to alleviate this issue?
    I haven't had time to take it to Apple because I'm currently taking a 21 credit semester academically. I'm an art and design student so my computer is basically the bane of my existence. Help! Any constructive advice is welcomed!
    Thank you so much for your input!
    -Christina C.

    Problem description:
    The Hard Disk is failing.
    EtreCheck version: 2.0.11 (98)
    Report generated November 4, 2014 at 7:59:28 AM EST
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2.2 GHz Intel Core i7 CPU: 4-core
      16 GB RAM Upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      8 GB DDR3 1600 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 512 MB
      Color LCD 1440 x 900
      AMD Radeon HD 6750M - VRAM: 1024 MB
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 0:3:43
    Disk Information: ℹ️
      TOSHIBA MK7559GSXF disk0 : (750.16 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      HDV4 (disk0s2) /  [Startup]: 749.30 GB (712.10 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/Avast/components/fileshield/unsigned
      [loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
      /Library/Application Support/Avast/components/proxy/unsigned
      [loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.avast.userinit.plist Support
    Launch Daemons: ℹ️
      [invalid?] com.adobe.SwitchBoard.plist Support
      [loaded] com.avast.init.plist Support
      [loaded] com.avast.uninstall.plist Support
      [loaded] com.avast.update.plist Support
      [invalid?] com.perion.searchprotectd.plist Support
    User Launch Agents: ℹ️
      [invalid?] com.avast.home.userinit.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [invalid?] com.jdibackup.ZipCloud.autostart.plist Support
    User Login Items: ℹ️
      None
    Internet Plug-ins: ℹ️
      AdobePDFViewer: Version: 10.1.1 Support
      QuickTime Plugin: Version: 7.7.3
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
      Default Browser: Version: 537 - SDK 10.9
    User Internet Plug-ins: ℹ️
      TroviNPAPIPlugin: Version: 1.0 - SDK 10.9 Support
      Google Earth Web Plug-in: Version: Unknown
    Safari Extensions: ℹ️
      Avast Online Security
      Trovi Search for Safari
    3rd Party Preference Panes: ℹ️
      None
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          16% mds
          7% WindowServer
          1% loginwindow
          1% fontd
          1% com.avast.daemon
    Top Processes by Memory: ℹ️
      120 MB com.avast.daemon
      86 MB Google Chrome
      52 MB Finder
      52 MB WindowServer
      41 MB Google Chrome Helper
    Virtual Memory Information: ℹ️
      13.45 GB Free RAM
      1.34 GB Active RAM
      944 MB Inactive RAM
      1.43 GB Wired RAM
      1.11 GB Page-ins
      0 B Page-outs

  • AP Aging report - key date for user entry

    Hi All,
    We have a requirement to calculate aging buckets like 0-30,31-60,61-90...etc.
    I know the key date for this report is created on net due date in SAP standard report.
    In standard SAP report , key date is always a system date(SY-DATUM).
    What we need for this report is , we need to get all the invoices which are outstanding as of that date(the date which user enters).
    If user enters today's date(08/28/07) , he should get all the invoices outstanding till that date in aging buckets and if user enters some date in the past like 07/26/07, he should get all the invoices outstanding as of that date.
    Can  someone Pls tell me if aging buckets are calculated based on a user entry ?
    Regards,
    Kumar

    Hi Voodi,
    Aging in the standard report is being calculated like below...
    1.For open items
    Posting date<key date
    Item status = O
    2.Posting date < keydate and clearing date > key date and net due date with offsets on keydate ( key date + 1 - keydate+30 --- for 1-30 days) like wise for all aging buckets.
    in this scenarion , key date is always system date ie today's date.
    But user wants to get all the invoices based on his user entry...
    is this possible with the same standard key date variable or do we need implement any other logic???
    Regards,
    Kumar

  • Photos will not allow me to set the key picture for the album or event

    Photos will not allow me to set the key picture for the album or event - it is set to grey !
    Anyone else had this and found why ?
    new PHOTO app replacing iPhoto bugs/ Problems OTHER PROBLEMS :
    - no longer has a five star rating system
    - my keywords for selecting albums are gone.
    - cannot copy location of one photo to another
    - cannot have an album with  keywords AND rating > a value
    - cannot set key photo of album/event
    - multi parameter search feature gone
    Anyone got any ideas how to get around this terrible downgrade of the software ?
    BTW I have just discovered that iPhoto and its' libraries are still there, so I can go back but be left behind and frozen in time on this version if I do.
    Photos now take up 700Gb whereas it was 350Gb  #@!$#@!@#!@#
    Thanks

    That are all good points - but Photos is a completely new application. and it is only version 1.
    Continue to use iPhoto, girraween; the next update to Photos will probably add a few more features.
    iPhoto 9.6.1 is working very well with MacOS X 10.10.3.
    The migration let iPhoto installed and also your iPhoto Library will still work with iPhoto.
    If you did not uninstall iPhoto, it will still be there in your Applications folder.  And if you had updated to the latest version iPhoto 9.6.1 before you upgraded to MacOS X 10.10.3,  you can simply drag iPhoto back to the Dock from your Applications folder and continue to use it. Double click iPhoto and confirm, that you want to open iPhoto and not Photos.   It is not compulsory to use Photos, while it it still the first release. When you launch iPhoto, you will see a warning, that the iPhoto Library has been migrated to Photos, but simply click the "Open iPhoto" button.The library will still work with iPhoto. ()see: If Photos won't open a library that you already migrated - Apple Support
    If your iPhoto version is not iPhoto 9.6.1, you need to update it.
    See this User Tip:
    Usually it will work to reinstall instead of updating:
    Get iPhoto 9.6.1 if you didn't update before OS... | Apple Support Communities
    The main idea is to move the iPhoto app to the Trash, so Spotlight does not see it as installed, reload the AppStore, and then to try to download again from the App Store - from your Purchases tab, not from the main page, since you can neither buy iPhoto nor update it, but you can reinstall, if your AppleID is associated with it.
    Meanwhile you may want to send a feature request to Apple using the feedback form. Apple - Photos - Feedback
    I hope, Apple will listen and add more features to Photos to make it usable for large Photo Libraries.

  • Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on X61/X61s

    Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD.
    This information can help address blue screen errors specifically
    related to Turbo Memory, but may not solve errors related to other
    issues. Please read through the instructions completely, make sure they
    apply to your system, and after attempting the solutions please post
    back with your feedback for the community.
    Some users may experience random blue screen errors with ThinkPad
    systems running Windows Vista with Intel Turbo Memory hardware. These
    blue screens may occur during normal usage on the system or they may
    occur when booting into Windows Vista. Blue screens related to the
    Intel Turbo Memory hardware may reference a stop code of 8086 with
    memory address locations of {0, 0, 0, 0}.
    There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
    Step 1: Update Intel Turbo Memory Driver
    If the driver version is before version 1.0.1.1004-7.0.3.1001, please
    update to this version.
    To determine what version of the Intel Turbo Memory driver is installed:
    1.    Click Start, then click Control Panel.
    2.    Click System and Maintenance.
    3.    Click System.
    4.    Click Device Manager.
    5.    Expand the Storage controllers category.
    6.    Double-click Intel Flash Cache Logic Chip.
    7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
    The new driver and installation instructions can be found here.
    Note: The Intel Matrix Storage Driver is updated with this package.
    Step 2: BIOS version
    If your BIOS version is older than those listed below, please update to the version listed.
    How to check your BIOS version:
    Turn off the system.
    Turn on the system.
    While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
    The
    BIOS Setup Utility menu will be displayed. If you have set a supervisor
    password, the BIOS Setup Utility menu appears after you enter the
    password.
    Check BIOS Version and Embedded Controller Version.
    Turn off the system.
    System BIOS versions:
    ThinkPad X61 or X61s - BIOS version 1.06 (7NET25WW)
    Please
    remember that these updates do not solve every possible system blue
    screen, but they do resolve several problems related to the Intel Turbo
    Memory driver.
    Tim Supples
    Lenovo Social Media
    Got a question? Don't PM me, post it on the forum!
    Lenovo Blogs
    X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

    Dear Tim,
    First off, many thanks for the tips for resolving BSOD with Vista + Turbo Memory on X61.  I've been suffering from this BSOD for countless times since I bought in my X61 7673-CW9 in April 2008.
    Even prior to having the pleasure to visit this wonderful forum, I followed both steps as indicated, and updated my Intel Turbo Memory driver to 1.5.0.1013 and my BIOS to 7NETB4WW (2.14).  However, the BSOD recurrs.
    For the past two months, I've recovered my system to factory default settings using Rescue and Recovery for over twenty times, each time with the latest Intel Turbo Memory driver and BIOS.  Notwithstanding that, BSOD recurrs.
    During these painful experiences, I tried two options: 1) making my X61 up-to-date by using System Update and Windows Update (including Vista SP1 or excluding Vista SP1); 2) keeping my X61 the status as factory default (i.e. without updating through either System Update or Windows Update (the automatic/scheduled update function of both is turned off)).  In either case, BSOD recurrs.
    I'm 100% positive that the BSOD does not arise from any hardware or software/firmware I install.  I never install any hardware (e.g. RAM).  And, it is not caused by any software/firmware I install: the clear and unequivocal evidence is that at one time,I encountered BSOD while having restored back to factory setting and booting for the first time.
    I live in Taiwan, and I seldom heard this BSOD here.  All of my friends (as most of Taiwan residents) using X61 operate in Traditional Chinese environment, whereas I operate in English environment.  In Taiwan, when booting for the first time after purchase/recovery, the Windows Vista Business system provides for lanuage choice (Traditional Chinese or English), and, once chosen, the language cannot be altered later on (unless, of course, the system is restored back to factory default settings).
    My system specs are the same as the day I purchased it and are listed below (as I'm not sure if my machine type X61 7673-CW9 is applicable outside Taiwan):
    Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz
    Memory: 1.00 G.B.
    System: Windows Vista Business (32-bit)
    Hard Drive: 160 G.B. @ 7,200 r.p.m.
    And, of course, with Intel Turbo Memory 1 G.B.
    I contacted the Lenovo support staff here in Taiwan for countless times, but they seem to be clueless.  I learned that some friends at this forum downgraded their OS back to Windows XP, but I chose not to.  The reason is simple: my purchase price for X61 7673-CW9 includes the Intel Turbo Memory, which cannot function under Windows XP (at least so far).
    Therefore, I just wish to share my experience here and perhaps I can get some advice from you and other friends here.  Any advice will be tremendously and enormously appreciated.
    Kevin Chen @ Taiwan

  • Tips For Solving the Mac OS X Lion Slowness (Lots of Beach Balls)

    Hi Folks,
    Just a quick list of tips for this issue that some of Mac OS X Lion users face.
    The main symptom is that we get the Beach Ball on almost any task, it takes 4, maybe five times more time to do what we need to do. So depending on the schedule, it can drive us crazy. I was facing that, and started to think that Lion was a Windows Vista relative.
    Please remind that the tips below involve backing up and restoring your system. If you are not careful, you may lose everything. You are responsible for your acts. Be cautious!
    How I solved my issue:
    1) Checked for Disk Permissions and the Disk itself:
    - Applications / Utilities / Disk Utility:
    - Click on your disk, and then VERIFY DISK. If everything is OK, move on. If it is not, REPAIR DISK.
    - Now click on VERIFY DISK PERMISSIONS. If everthing is OK, move. If not, Repair.
    This step 1 is to make sure that your slowness is due to something related to the OS itself and not to permissions/disk.
    If this solves the slowness, then you are OK. Now further steps are necessary. In my case, this just helped a little bit. The beach-balling reduced by 20% only. Still too slow.
    2) Do a full backup of your system.
    I used Time Machine. Make sure you have all of your applications closed. So the backup will be full. If you fail to do a good backup, you will lose everything! Make sure you do a good one. Maybe do it twice on 2 different disks! Now you have been warned.
    3) Do a Full Restore of your entire system.
    Now, get that Install CD that came with your Mac,
    - Put it on your drive, shut down your computer.
    - While holding the C key, press the start button of your Mac. It will boot using the Install CD that came with your Mac.
    To recover your entire system:
    Connect your Time Machine backup disk to your computer. If you’re restoring your system because of a problem with your startup disk, make sure the disk has been repaired or replaced.
    Insert your Mac OS X Install disk, and double-click the Install Mac OS X icon.
    In the Installer, choose Utilities > Restore System from Backup.
    In the Restore Your System dialog, click Continue.
    Select your Time Machine backup volume.
    Select the Time Machine backup you want to restore.
    Follow the onscreen instructions.
    4) Remove the CD, and boot.
    When I did that, the system came back very fast and responsive. No more beach balls (only on the really-intensive tasks), and everything was back to normal.
    5) So, what was it anyways?
    Before doing this Backup/Restore, I was getting lots of DISK I/O ERRORS, specially during boot time (you can check that by shutting down your mac, powering it back on and imediatelly pressing Command-V - Verbose Mode).
    Sure, the first thing in mind was that I had a faulty hard drive, but I checked it several times for errors (via Disk Utility), and nothing showed up.
    So I decided to do a full backup/restore of the system. And it solved it, at least for me.
    My config:
    MacBook Pro (2009 edition) - 5 GB RAM - 640 GB HD - Mac OS X 10.7
    Regards.

    Also my mac will not complete my 5 software updates, no idea which software, but it said it could not do it. Also backing up with time machine had failed twice today. Thanks

  • Report Painter - new Basic Key Figure for Currency Translation

    Hi,
    I need a report painter report which allows to translate the company code currency HSL in GLPCT into several target currencies. Theoretically I need to translate each month with an own translation rate and possible different translation keys.
    In table T804B I tried to create a new basic key figure for GLPCT in order to translate the HSL amount with a second TCURR rate. I copied the original basic key figure GLPCT - CC_HSL. I selected structure GLBDZ and fields CCH++ as data source and assigned new variables for the TCURR selection.
    The report painter report is setup with three columns : one in HSL, one with CC_HSL and one with the new key figure. In the selection screen of the report painter report I can enter two rates. But after execution the translation of the new basic key figures is done with the same rate as the CC_HSL column is using.
    Did anybody encounter an equal problem?
    Many thanks and regards
    Markus

    have you created a new calculation routine in form pool SAPFGRWG equivalent to E06_CALC_CURR_CONV_HSL? doesnt this explicitly get the company code currencies

  • Exchange 2013 with Outlook 2013 - Not getting pop-up or mail tips for attachments exceeding max size

    Our environment is Exchange Server 2013 CU3 and Outlook 2013 in cached mode. We have a transport rule that sets the max attachment size to 20 mb.
    If someone sends an attachment larger than 20 mb they receive an NDR letting them know the message wasn't delivered because it exceeded the max attachment size. We would like for the user to be prevented from sending the message at all or to at least
    get a mail tip before they try to send the message. The Outlook pop-up message that says "The file you're attaching is bigger than the server allows. Try putting the file in a shared location ..." isn't being generated for us. Not sure if that's
    because we're running Exchange or not. If that pop-up isn't going to work it would be nice if the user could at least get a mail-tip warning them that the attachment exceeds the limit. But it doesn't look likes there's a mail-tip for attachment size, only
    for message size. And, I've found that the message size mail-tip only works if the limit is set on the user. It doesn't seem to work if the limit is set via a transport rule.
    Has anyone else gotten Outlook to present the pop-up or a mail-tip when exceeding attachment size? Any help you can offer would be greatly appreciated.

    Thanks but I performed all of those trouble shooting prior to posting to the forum. But, I have found the answer!
    After referring to this article;
    http://technet.microsoft.com/en-us/library/bb124345(v=exchg.150).aspx
    I removed the 10mb default limits from the organization config and chose to set the attachment and message size limits in our environment via transport
    rules instead. That is the only way you can actually set an attachment size limit.
    I had read this article several times searching for an answer;
    http://support.microsoft.com/kb/2813269#appliesto
    The key is here;
    "If you are using an Exchange Server account, the 20-MB attachment
    limit for Internet email accounts is not used by Outlook 2013. Instead, Outlook uses the limit that is configured on your Exchange server. To modify the setting that is used to control the size of a message that is sent through an
    Exchange Server account, follow these steps."
    The steps that follow are for Exchange 2010 but they show setting organization limits not server limits. And note that it
    says the size of a message, not the size of an attachment. Since mail-tips for message size are not displayed when the limit is set via the transport rules I thought it
    was possible that the same inconsistency might apply to the attachment pop-up warning. I set the organization limits and voila! The pop-up now displays when an attachment that exceeds the message size limit is added to a message.
    This is exactly what I wanted. Now users won't fill up their sent items trying to send large attachments that just bounce anyway.
    It would be wonderful if Microsoft would provide information about what features of Outlook are affected when you apply message size limits at the
    various levels. 

  • Hopefully useful tips for endless processing

    I also posted this in reply to another user, but I think it might be useful enough to others that I will post it here so it's not so buried.
    I'm just starting, after many, many hours, to see the light at the end of the tunnel with Aperture 3. I think A3 offers some great options, and is a diamond in the rough -- very, very rough, even in v3.0.1.
    But I think I have some VERY USEFUL TIPS for you here (again this is after a lot of learning by pain... 4 different attempts to "upgrade" my A2.1.4 library (42K images about 200GB of images).
    1st, and possibly most importantly the "SHIFT" key is your friend. You can use it when you restart A3 to stop the endless processing loop that A3 would fall into every time I upgraded or imported my library to A3 (or 3.01). All you need to do is hold down the "SHIFT" key while restarting A3, this should top all previously stuck processing as you upgrade your library. So use this tip after you first upgrade/import your library, if the processing bug hits. Then you have to be patient and go though your library and figure out where the problem files are (Apple has done a LOUSY job in not identifying what specific images A3 is processing in the "Activity Window" -- Let Apple know if this really bugs you)
    2nd, at this point you will need to systematically go through your library and figure out where the "problem" files are and "fix" them (in my case all of these worked just fine in 2.1.4 - go figure). I would start by generating thumbnails for all of the images in a project, one project at a time (I had 150 some in my library). When you get stuck in the "processing" loop again, you can restart A3 using the "SHIFT" trick, and maybe just try a chunk of images within that same project until you find where things fail again, and until you can get to the offending image (if it's a problem you won't be able to generate a thumbnail for the image -- and A3 will go into endless "processing" mode)
    3rd, this sound like a horribly tedious process and it is. But I can offer you some useful tips. In my case, and others as well apparently, a lot of the offending files are 16-bit PSD or TIFF images, especially if they had adjustments applied in A2.1.4. In my case I had fewer than 50 of these, so I exported an original and a jpg for each of these files. I re-imported the jpg and deleted the PSD/TIFF from A3 (I kept the exported original for future use). These files would then generate thumbs without endlessly processing. The other type of file that I ran into problems with were stitched panoramic images (often over 30MP) that I had applied adjustments to in A2.1.4. I simply removed the adjustments and the generated thumbs for them (worked like a charm).
    4th, download some good podcast, music or audiobook... this will take a long time.
    Cheers, and look me up in FaceBook I started a group called "Apple Please Fix Aperture"

    Danny,
    Funny you should mention this.... (actually it makes you look a bit like a "schill", even though you are not)... nope, as far as I can tell there is no way to tell which specific images are causing A3 to grind to a halt.
    Hence my comment:
    "(Apple has done a LOUSY job in not identifying what specific images A3 is processing in the "Activity Window" -- Let Apple know if this really bugs you)" and similar previous ones in other posts.
    I wonder if Steve, yes that one, knew about this, being the perfectionist he seems to be, if he would have this feature included in Activity Monitor ASAP, or more likely it would have just been fixed by now (more of a "one-button" solution). Anyone have his house #?
    In any case, I please let me (us) know if this helps resolve your problems... and consider joining the Facebook group as well and maybe we can hope for a much better 3.x.x version in the very near future.

  • Three keys of my keyboard are not working, the cap one, the return key and the space bar, while the virtual keyboard shows to others keys highlighted in orange (^ and `); How to fix it? I writing now with a bluetooth keyboard.

    Three keys of my keyboard are not working, the cap one, the return key and the space bar, while the virtual keyboard shows to others keys highlighted in orange (^ and `); How to fix it? I writing now with a bluetooth keyboard.

    All new keyboards need Snow Leopard 10.6.8 and above for full functionality.
    Rather short-sighted of Apple perhaps, but that seems to be a trend these days.
    I'm afraid the only fix is to upgrade to SL. Personaly, I'd take it back and get a refund and seek an older keyboard or a third-party one elsewhere.

Maybe you are looking for