Three Monitors - How to change alternate

I have three monitors connected to my Mac Pro. I like to use an alternate monitor to view my photos, but Aperture is not selecting the monitor I want as the alternate. How do I tell aperture to use a different monitor as the alternate monitor.

Aperture doesn't support 3 monitors

Similar Messages

How to change alternate id

How do you change an alternate id?

I have my apple account and an alternative apple id. I wish to cancel this alternative apple id is there any chance of me doing this?

Satellite 1800: dim monitor - How to change the contrast

Hi, satellite 1800 has a dim screen that I cant seem to resolve. The images are just about visible. Its fine with an external monitor-is there a contrast button anywhere?!

Hi
You can change the display brightness with the key combination FN+F6 and FN+F7.
If it is not possible so I assume there must be something wrong with the hardware (FL inverter)
Usually if this part is defect the display is not clear. In this case you should contact the ASP in your country.

G5 Quad three monitors, how to view FCP?

My trusty G5 Quad has two Geforce 6600 256 graphics cards, 8 gigs of ram, one 30" ACP and one 20" ACD, and a 4 channel internal sata card. I have the first two displays hooked up to the first graphics card and my Sony 34xbr910 hooked up via DVI to the second card. I want to be able to output from FCP, or quicktime, or even the dvd player, onto the Sony but all I can get to display is a desktop, which looks pretty good. I thought the controls would be in FCP but I can't find them.
How do I set this up?
Thanks
Steve

Aperture doesn't support 3 monitors

How to change default PIRWBUSER password for ABAP Proxy monitoring ?

Hi,
Please advise how to change setting for PIRWBUSER in PI so no need to use master password PI in ECC server.
In the Message monitoring you can have option to monitoring ABAP Proxy transaction in the other SAP Instance. But of course you need to have PIRWBUSER in that target SAP instance.
How to change this configuration for PIRWBUSER for other SAP Instance. because other SAP instance it migh have different password for PIRWBUSER ?
Regards
Fernand

Hello there.
Please check the note below according to your system:
#999962 - PI 7.10: Change passwords of PI service users
#936093 - XI 7.0: Changing the passwords of XI service users
#721548 - XI 3.0: Changing the passwords of the XI service users
Regards,
Caio Cagnani

I have three email accounts and want to know how to change the display order.

I have three email accounts and want to know how to change the display order.

Install this add on.
https://addons.mozilla.org/en-US/thunderbird/addon/manually-sort-folders/?src=search

I have file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method? alternate method? I have Adobe Ac

I have pdf file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method? alternate method? I have Adobe Acrobat X Pro and Windows -7 platform.

Yes, I just want to cover up all the pages for those particular area of document numbers.
Nothing sensitive about it. I just want to show the correct document numbers on all pages in print out.
So, I wanted to cover up by comments, but commenting on each page will be difficult. So, I wanted to comment the same on all pages.

How to change colors in Auction monitor

Hi Experts,
Could you please help me on below requirement,
In Auction Monitor , need different darker colors for tracking bids because some colors cannot be seen on the screen.
Could you please guide me how to change colors in Monitor.
Thanks,
Pavan.

Hi Vinay.
I would like to suggest a couple of references, quite similar to your requirement,
[SDN - Reference for Different Colors in Single Graphical bar|About Different Colors in Single Graphical bar;
[SDN - Reference for changing colors for graphs|Anyone used colors in VC?;
[SAP HELP - Standard Reference for Assigning Colors to Parts of a Graph|http://help.sap.com/saphelp_nw04/helpdata/en/39/cca358576911d1896f0000e829fbbd/content.htm]
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

How to change language of the server monitor ?

hi all,
How to change language of the server monitor ? i got it in japanese and would like to turn it into English.
Thx for your help,

We use japanese strings only when your server locale has "jp": FindNoCase("Japan", GetLocale()) NEQ 0. So you may not be able to individually change server monitor's flash client, but there are two ways to change it back to english on server level
1) Check your server locale and change it to anything but japanese.
2) Rename smresource_en.xml to smresource_jp.xml in CFIDE\administrator\monitor (take a back up).
Thanks,
Chandan Kumar

Question on iCloud accts: I have my iPhone and iPad on one account, but my Mac is set up on my old mobile me acct. Can't figure out how to change an iCloud account number on my Mac so I can sync all three.

Question on iCloud accounts: I have my iPhone and iPad on one iCloud account, but my Mac is on my old Mobile me account. Can't figure out how to change my iCloud account on my MacBook Pro so all 3 are synced.

First, open System Preferences > MobileMe and log out. Then, open  > About this Mac and see Version. If you see 10.5.x or 10.6.x, see > http://www.apple.com/osx/specs If your Mac is compatible, upgrade to Mac OS X Snow Leopard 10.6.8 and purchase OS X Mountain Lion.
When you have upgraded, go to System Preferences > iCloud and follow its steps

How to fix three monitors after installing latest Mac update?

I installed the latest release, OS X 10.9.3 (13D65), and now my three monitors are all messed up. I tried going into sytem preferences and looking at the monitor set up there, but nothing helped.
When I move my mouse, I never know where it is going to show up, and it does not move properly from one screen to another.
Any ideas?

From the Mac discussion forums: http://discussions.apple.com/thread.jspa?messageID=4930170&#4930170
Try this: download and retrofit (force install) QT 7.1.6 using Pacifist, then run the 10.4.10 Combo Updater for Intel Macs. Make sure it is the "combo" updater. Be sure to restart in safe mode after using Pacifist and then install/re-install the combo update (while in safe mode). For all those "non-techie" people (like myself), please try this if you already haven't and please read the instructions for Pacifist - if you use Pacifist correctly, it will ask you if you want to replace (vs. update) all of the Quicktime components (yes, you want to replace), so you will know that you are accomplishing what you need to. The first fix I tried was just to reinstall the Mac OSX10.4.10 combo update for Intel Macs and this did not work, but when I used Pacifist and then reinstalled the MacOS X combo updater (do not get this confused with the update that is not the "combo" one- (use the links), it worked! I am not a web developer, so did not have to deal with the Java 6 stuff.
Combo Intel update is here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10410comboupdat ev11intel.html
QuickTime 7.1.6 is here:
http://www.apple.com/support/downloads/quicktime716formac.html
Pacifist is here:
http://www.charlessoft.com

How to change my Email address and my home address ?

Hi,
I Create a new account @live.com , I want all my last certifications to be use the new Email address instead of the old one
and also how to change my home address
Last Questions , I want to change my login account on this forums to use the new one so i keep with all my questions and my points in the new login
Thanks.

Hi.
You can change your home address at the Microsoft Profile Center. You will need to log in with one of your Live ID accounts and change here it here:
https://profile.microsoft.com/regsysprofilecenter/infodefault.aspx
As Sathya suggested, you can contact the Microsoft Certified Professional Support staff to move your certifications from the old email address to the new one, here:
MCP support contact information
Telephone: (800) 636-7544
Monday through Friday: 6:30 A.M.–5:30 P.M. Pacific Time
Email: [email protected]
Expect a response within two business days.
Fax: (661) 793-6555
Alternately, you can contact your Microsoft Regional Service Center for Microsoft Learning. Please use the following web page to find the contact information for help.
http://www.microsoft.com/learning/en-us/help.aspx
The page includes email and phone contact information for your geographic location so you can email or call them directly. They will help you get your MCP ID transferred to your new Live ID email account.
NOTE: This public forum is usually monitored by fellow certified IT folks and trainers.
Good luck!
Best wishes, Davin Mickelson

How to change the default save encoding of the dvm files when create dvm???

When I creating a DVM(domain-value mapping) in Chinese on the ESB control and confirm it, then restarted the SOA service, the DVM that I created in Chinese disappeared from ESB control. All the maps(both English and Chinese ) are in DVM Repository.
After I updated the encoding from ‘UTF-8’ to ‘GB2312’ in the three files below, and restarted the SOA service, the DVM in Chinese appeared on ESB control.
But when I adding the second row in Chinese and save it, then restart the SOA service, the DVM in Chinese disappeared from ESB Control once again. Because the encoding in the three files below is updated from ‘GB2312’ to ‘UTF-8’ .
Files:
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm\Chinese.xml.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\content\files\dvm\Chinese.xml_1.0
How to change the default save encoding of the dvm files when create dvm in ESB control ???

I have the same problem. When I updated to Mavericks now the bookmarks bar font is huge. I liked it the way it was before. I liked the smaller font. Also wish I could change the color of the sidebar and font/folders too.
I tried to see in preferences if there was anyway to change it, but I don't see anything there.

How to change external display resolution WITHOUT clicking "CONFIRM"?

I have a somewhat unusual situation. My MacBook laptop is actually now a ModBook (a pen-tablet computer), and as such I no longer have a trackpad attached to it. All of my inputs are via the stylus, tapping directly on the built-in display.
This works perfectly fine, except when I need to give presentations on an LCD projector (which is quite often lately). I like to use the projector as an external monitor, so that I can run the Keynote presentation on it while using my laptop screen as the presenter's display, with the upcoming slide, etc. If the projector doesn't give me an ideal native display option (sometimes, the aspect ratio for the 3 or 4 resolutions available in the Displays drop-down in the menubar turn out to be stretched or squeezed), then I, naturally, have to open the Display System Preferences and try out different resolutions.
The problem is, since my stylus only interacts by clicking directly on the built-in-display, I have no way of moving the cursor over to the external display when the dialog box with the "Click here to confirm change/You have 15 seconds..." message appears. So I can never click it ... so I can never confirm the new settings.
The workarounds I've used so far are:
- Mirror displays (not ideal, as I need the presenter preview of the next slide)
- borrow a mouse from someone (usually from a Windows desktop, frankly) and plug that in to briefly mouse over and click the confirm button
I'd love to find a software workaround that allows me to NOT mirror displays and also doesn't require me to carry around a mouse all the time (my laptop bag is already overstuffed...).
Thanks.

Fateh wrote:
I hope that my question is clear ... Nope.
How to change the display resolution of APEX ??APEX doesn't have a display resolution. "Display resolution" is an attribute of the device and user agent software used to view the APEX page.
What do you mean by "the display resolution of APEX"?
In other word, if an end user sees large elements on a pageWhat "large elements"?
then he/she zooms it outHow?
"Zooms" what—the entire page or a single "large element"?
How can I set a proper ZOOM for my app by default ...Meaning what?
And as usual, we're missing:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
You've been posting here for years. You know this basic information is necessary to understand and reproduce problems.
If you're looking for help it doesn't seem unreasonable that you make the effort to provide a full, clear but concise description of the problem or requirement.

IHow do I know what the bit details are on an image and how to change it?

I wanted to send some wildlife images to a magazine who required us to send quality size 10
saved at 300dpi and then to send a copy of the same images at 72dpi and 8bit NOT 16bit.
I have no idea what they are requesting so please:-
1) How do I discover the details of my photograhs ie resolution 300dpi or 72dpi and how do I change it.
2) How do I discover the bit on images and again how do I change it as requested by the magazine.
Please please keep it simple as I am getting on a bit (pardon the pun) and do not understand computers.
Photoshop Elements 8 seems so complicated
Thank you for any help.
Brian Holland

Hi Barbara,
Firstly I hope you had a great Christmas and I wish you a happy and healthy
new year.
I have been experimenting with colour changes in my Photoshop Elements 8 and
am encouraged having changed the colour of my car in the image.
I now would like to know how I change images that are black i.e. a crow in a
photograph or change the white in a photograph i.e. a swan.
I have looked at the Adjust Hue and Saturation and then the 'Master' but
there does not seem to be a facility to change black and white.
Also confused by Magenta and Cyan what colours do they represent please
should I ever need to use them?.
Thank you again for your help.
Brian.
PS Have also been experimenting with text and shapes and can now alter the
colours of each and with text vary the font, colour, and style. Progress for
an old chap of seventy three.

Three Monitors - How to change alternate

Similar Messages

Maybe you are looking for