Three monitors - two for Premiere, one as Reference, from Geforce GFX 570 - possible?

My new system for Prodcution Studio CS5.5 has a Geforce GTX570 graphics card to which I've attached my two monitors (via DVItoVGA convertors)
I've read posts on this forum where people have mentioned adding in an extra graphcis card to drive a separate reference monitor
My question is, given the Geforce GTX570 has a mini-HDMI port and a Displayport as well as the two DVIs that I'm using, do I need a separate extra graphics card to run a a separate reference monitor in additon to the two 'program' monitors I already have? I want to run a HD1080 screen from the mini-HDMI port as a reference monitor... but I've been reading around and I can't work out if this is possible, or whether I will need the separate graphics card to do this
A related issue - if I can't run the third monitor from the GTX570, can I use the on-motherboard monitor outputs instead of getting an additonal graphics card? The motherboard in this syetm is an Asus P8 Z68-V Pro with a Core i7 2600K chip in, and has (unused) a DVI and a mini-HDMI port - might these do for the Reference monitor?
Finally, I also want to be able to use the reference monitor in After Effects - presumably this will not be an issue - there's no separate setup / workaround / other complication in doing this
Your comments appreciated - I'm sure there must be other people out there who've encountered these questions - I'm just trying to get as fully in-the-picture as I can before spending cash
Thanks
jON

You'll need a second GPU, preferably the same or very similar to your primary one. The on-board GPU may work--it more than likely will if its an Nvidia GPU and you can use the same drivers, but I suspect it's probably Intel or something like that. There can be issues if you have two different GPUs from two different manufacturers installed simultaneously. Not saying for sure that it wouldn't work, but it's inviting headaches.
After Effects doesn't use monitors the same way Pr does--specifically, it doesn't do a full-screen output to a second monitor that's attached via HDMI, DVI, etc. However, you could set up a workspace that maximized the Composition window on a second monitor, but it's not exactly the same effect.

Similar Messages

Three CMs or Two CMs and One SRST Reference

Noticing documentation on CUCM and phone registration stating that a phone can receive "either up to three CUCM servers or two CUCM and one SRST reference." (emphasis mine). Does this mean it is one OR the other; you can either have three CMs in your CM Group or you can have two CMs in a group and one SRST reference? We've normally configured three CMs in a CM Group AND an SRST reference. Suppose I could view a cnf file and look at it myself, but thought it would be good to ask the question here for future reference.
Thanks,
Ryan

That's 3 CUCM servers in the CUCM group + SRST reference.

Three monitor setup, Only use one of them?

Hi!
Before i buy a third monitor I want to make sure everything work as expected. I need to be able to switch between the monitors so sometimes I want all of them to be active, sometimes only two or one of them. How do i switch between those modes?
I have two now and its easy in Windows + P where i can choose "PC Screen only" and "Second Screen Only" or extend. How does it looks with three monitors? What i want to switch between First & Second and Second & Third ?
Thanks for the help!

I shall suggest you to go through the following article:
Nice Multi-Monitor Enhancements in Windows 8.1
You may try DisplayLink
S.Sengupta, Windows Entertainment and Connected Home MVP

Monitor two systems in one solution - BPMoni

Hi,
I have configured business process monitoring for our production system but now need to add our test system into the solution and monitor the test system as well to do some testing.
When I go to Solution Landscape Maintenance both clients from two different systems are included in the solution but when I go to "Setup Business Process Monitoring" only the production one is listed under Logical Components tab.
Sorry I am very new at this but how can I get the business monitoring to work for both systems?
Thank you,
Sergiy

Hi Sergiy
Yes you have to use 2 logical component to monitor 2 different system.
Logical component consit of system+client.
So for example, you want to monitor cleint 100&200, then you need to
define 2 different logical component for client 100 and 200.
Same things also apply. If you want to monitor same business process
in different system.
So create logical component 1 for your production system.
And create logical component 2 for your test system.
Then create 2 business process (exactly same).
Business Process: order to cash.
1.Business process step : create sales order (T-CD VA01) <Logical component1>
2.Business Process step : create delivery (T-CD VL01)<Logical component1>
Business Process: order to cash (test).
1.Business process step : create sales order (T-CD VA01) <Logical component2>
2.Business Process step : create delivery (T-CD VL01)<Logical component2>
Then you can monitor business process order to cash in 1 solution.
But I think it is better to create 2 different solutions since operator
might not want to see business process for test system in BPMon.
Best Regards
Keiji

Monitoring two instruments in one vi

I have two instruments that I want to controll (with LabVIEW) and monitor their output. What is the best programmatic way to do this? Use two parallel while loops?

Hi,
If you are using Visa have a look at locking.vi in the Hardware Input and Output | Visa folder of the examples supplied with labview.
I have used this to avoid tying to address two instruments at the same time when you only have one gpib card.
Regards
Ray Farmer
Regards
Ray Farmer

Sound Monitors [Speakers] for Premiere Pro

I am looking to buy sound monitors for video editing in Premiere Pro. I was looking at the best choices and why. Could someone please enlighten me on what is the best out there for windows 7 platform. Budget is £100 or $160. I have seen some with USB connections and just really don't understand what difference will this make over the standard PC audio jack.
Thank you for your help.

Something like these:
Cambridge Audio a5 hifi amplifier | eBay
KEF CODA 7 BOOKSHELF SPEAKERS VERY GOOD CONDITION | eBay

Three computers, two Outlook accounts, one Pearl 8110

Here is my situation: I use Outlook 2007 at home with standard POP access to my Yahoo e-mail address. I just started a new job with a company that has an enterprise server with wireless sync capability. What I want to do is have my personal Outlook account at home be consistent with/sync with my business Outlook account at work, and have it consistent across three computers -- laptop at work, laptop at home, and desktop at home. Currently, I don't use my BB for my personal e-mail (I inherited the phone from my previous job, and I'm too cheap to pay for the data package with my carrier), so the non-e-mail functions -- Calendar, Contacts, Tasks, Notes -- are the most critical to to me, but if it's possible to pick up my personal/home e-mails, also, that would be ideal. I sync at home manually, both with my laptop and my desktop, and at work I'll use the wireless sync. Is it possible to make all this work the way I envision it? Thanks for your help.

Thanks. Here's my problem though -- I'm more concerned about keeping my calendar and contacts and tasks and notes consistent across the three computers. I'm set up for wireless sync at the office, but when I try to manually sync at home, it tells me that I can't sync without turning off wireless sync. That's a pretty cumbersome process to do every day, you know? Add to it that when I turn wireless sync back on, I get a message that says "changes made while wireless sync was turned off may be lost . . ." Sort of defeats the purpose, doesn't it?

I can't sign up for Premiere, one year month-to-month. After I confirm payment type I get an error.

I get the error:
We are unable to change your plans at this time. Please try again later
I've been trying for two days and nothing works.
I have not been billed and the subscription is not active.

This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

I have two Apple IDs - One prevents me from updating Apps...

I have two Apple IDs and although I am signed into my iPad as one, when I try to update my Apps., it asks for my password for the other ID - a password that is not retrievable from any of my email accounts.

That's probably because the Apps were purchased through the other Apple ID. SInce the Apps cannot be transferred between Apple IDs you may have to delete the Apps in question and repurchase them under the correct Apple ID.
Make sure that you setup a rescue e-mail address for your functioning Apple ID.

What happens to plug-ins for Premiere Pro when upgrading from CS6 Production Premium to CC?

If I upgrade from CS 6 Production Premium to CCloud, what happens to the plug-ins currently installed in Premiere Pro? Will I lose them (some Red Giant, Synthetic Aperture and such)?

Not only that, there was an internal code change when going from CC to CC2014
http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
-so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
If you are sure you don't need the old CC programs
-http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
-read reply #3 about the ORDER of uninstalling & installing https://forums.adobe.com/thread/1242671

Two users using one Time Capsule from one MacBook

My wife and I both have separate accounts on my MacBook. I'm using the TimeCapsule as a network drive. When I log in to my MacBook account, I can access the Time Capsule. When my wife logs in later, she can see the Time Capsule in Finder, but is not allowed to access it. If I then switch back to my account and dismount the Time Capsule, my wife can access it.
If my wife logs into her account first, it's the other way around.
So I don't think there's anything basically wrong; we can both access the Time Capsule, as long as we're the first to log in to the MacBook.
I have enabled filesharing on the Time Capsule, with Time Capsule password (so not with accounts or disc password).
I would like to be able to access the Time Capsule, even when my wife is already logged in.
Is that possible?

Same problem here. From another thread (http://discussions.apple.com/thread.jspa?messageID=12839145&#12839145) I get the impression it cannot be done, but surely there's a workaround?..

Distribute video output over three monitors (+ another)

Hi there,
I've got a triple beamer setup + a Cinema Display. My Mac Pro has two ATI Radeon HD 2600 XT cards. What I need to do now is use the monitor as an operating monitor and combine/distribute the triple beamers in such a way that I can play one 1920 x 480 video file over all three monitors simultaneously, for an event.
The two ATI 2600 cards are especially in there to be able to do this, but when I try to combine the monitors through display settings or through the Quicktime settings, it just doesn't seem possible. VLC won't play my ProRes 422 material, but I could re-render off course when the video is done.
Is my only option a bloody €200,- video splitter, or can I do this 'the software way?'. I find it so hard to imagine that what I want wouldn't be possible with all the hardware power I've already got! Friendly greetings, Douwe.

If you click the "?" in the "Arrangement" tab of "Displays" system preference, it will tell you how to set three out of the four displays to mirror mode, leaving the fourth separate.

Can the new 2014 Mini (with Yosemite) be connected to three monitors?

Can the new Mac Mini drive 3 monitors simultaneously from the two mini displayports and the HDMI port? When reading the specs I remember reading that it could drive 2 monitors via the mini displayports. I'm wondering if it can also drive a third monitor thru the HDMI port at the same time.

No, natively the Min can't drive three monitor.
For a third monitot you need an addition adopter like:
http://www.tuaw.com/2013/05/11/kensington-usb-3-0-multi-display-adapter/
http://www.matrox.com/graphics/en/products/gxm/dh2go/digital_me/

I chose a template for the free partner site but want to change it for another one

I chose a template for the free partner site but want to change it for another one. Is there anyway this is possible and to start again? Been looking for hours to fix this and kinda got frustrated and deleted most of the code.....

I had the same problem.
I wanted to test the free site with a dummy site first but I since I can't delete the dummy site now to start afresh, I have no choice but to go elsewhere.

Currency Translation not working with "Time Reference from Variable"

We have created several Currency Translations using RSCUR with a fixed "Key Date". All have been working fine until we got the request to allow a variable date for the exchange rate date. I have built a variable on 0DATE which I am putting a default date value into using user exit. This default date is the SAME date as the fixed "Key Date" which we have been using. Unfortunately when we use the "Time Reference from Variable" option and use this new variable, no currency conversion is taking place, instead it only shows the original currency values. I am 100% sure that my variable is getting a value and it is the same date we are using for the fixed "Key Date" value so both methods should be using the exact same exchange rates. The documentation that I can find states:
●      Time reference: The time reference for the currency translation can be either fixed or variable.
If the time reference is fixed, the time at which the exchange rate is determined is independent of the data. You have the following options:
○       You can establish that the time reference be determined upon translation.
○       You can select the current date.
○       You can specify a fixed date as the key date.
○       You can specify any variable that exists for InfoObject 0DATE.
○       You can establish that the query key date be used. This is determined in the query settings.
In my case I am only switching from option "You can specify a fixed date as the key date"=(Key Date) to "You can specify any variable that exists for InfoObject 0DATE"=(Time Reference from Variable).
What am I missing? Any help is appreciated.

I neglected to mention that we are calling this currency translation through a WAD button using the SET_CURRENCY_TRANSLATION command. I did do a test by applying the currency conversion within query key figure. This seems to work. So it appears the issue is with how the WAD is processing the variable, not the query. When I display the variable in a drop down item within the WAD it does have the default value that I have assigned in user exit.

Three monitors - two for Premiere, one as Reference, from Geforce GFX 570 - possible?

Similar Messages

Maybe you are looking for