Three Point Edit not working correctly :(

Hi there,
first of all I'd like to say thank you Adobe for listening to your users. And I hope this one gets noticed right away....:
It appears that 3 point editing ist not working correctly.
Right now I'm editing a video and I heavily rely on 3 point editing.
I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
Coming from tape workflows I really don't like clicking clip after clip...I need to edit
Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
As soon as I want to use my source sequence with its individual tracks and hit (.) or (,) just nothing happens. Hmpf!
Come on guys, that is essential editing stuff, not fancy speech detection blabla...sorry but this is mega-annoying right now....
It says "Pro" right after "Premiere". So please make it pro! Professionals need ROCK SOLID essential functions.
Make us editors happy having switched from Avid/FCP etc.
Make essential stuff rock solid. That's what makes an app "pro".
Cheers and please mind my harsh words. Just a little upset right now. (I know that's not pro either )

bmfm_ wrote:
I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
Hi bmfm,
I think I know what's going on. The behavior you describe happens when you try to edit back into your original sequence. Can try making a new sequence to cut your selects into? See the page in help for details: http://helpx.adobe.com/premiere-pro/using/edit-sequences-loaded-source-monitor.html
Thanks,
Kevin

Similar Messages

Mouse pointer is not working correctly

I have a MacBook Pro and the pointer is not working correctly. It does not work smoothly and it is hard to get it to go where I need it to go.

Hello billm46,
Welcome to the Apple Support Communities!
It sounds like the trackpad on your MacBook Pro is displaying jumpy behavior. In this situation, I would recommend reading over and working through the suggested steps in the attached article.
Trackpad or Magic Trackpad is jumpy or erratic - Apple Support
Have a great day,
Joe

HT2509 Font Book not working correctly? or Text Edit not working correctly?

I downloaded a font onto Font Book and it works perfectly on Font Book and all the characters and symbols come up correctly, as they should. Then when I use it on Text Edit, it replaces the ', " and @ with a $ sign. What can I do to fix this, or is it unfixable? I'm using a Mac OS X 10.7.5 and I'm not sure what could be causing this situation.

It does that because that's the way the lazy person who created this font built it. Here's the layout of the font you're having trouble with:
Now compare it to the OS X supplied font Andale Mono:
Note on the third line, second from the right that Andale Mono has an @ symbol in the "at" position. The person who created the font you downloaded types a $ sign because that's what they put there, along with dozens of other glyph positions (must have really loved how they drew that $ sign). Which when you look where the quote and apostrophe are, they are also filled with the $ glyph.
The font is a piece of junk. Delete it.

Fit to fill edits not working correctly

When I do a fit to fill edit about 2/3 of the clip is slowed or speeded as required then it stops with the last 1/3 taken up by a freeze frame based on the frame where the clip has stopped. Any ideas?
Thanks Henry

Tom
Thanks for writing back. I think I am begining to get it! It is about using files that have a coherrent set of characteristics for the editor to work with. I have now actually managed to make some pal files function on fit to fill properly. The clips that I am working with were originaly recorded with these characteristics:
File type: AVI. Recorded with NSTC setting on camera. 30fps. 1.3mb/s pixel aspect square. Field dominance none. Alpha None / ignore.Composite normal. Audio 1 mono. Audio rate 8.0 Khz.Audio format 32 bit floating point. (I do not want to use the audio.)
Can you please tell me what is the best FCE setup for this type of file and or what does the file need to become to work well in the FCE envronment.
Whilst the FCE handbook is very good about how to do things in the program it is vague about what filetypes function well. I feel like I have been blundering around in the dark.
Best Henry

Clip looping not working correctly unless I edit clip in Waveform editor (CS6)

I record a short clip
I use the, razor, slip or time selection to trim the clip to the exact length I want it to be.
I rt-click the clip and enable looping
I go to the right edge of the clip and stretch the clip to make it loop one or more times.
Problem, the clip loops but not at the begin and end point I expected based on #2 above.
I eventually went into the wave form editor and just deleted the dead air at the beginning of the clip (but not at the end) and now the looping feature works as expected.
Am I missing something? Is this the correct behavior? Do I have to edit a clip in waveform editor to make it loop correctly?
Thanks, I'm new to AA and just getting started with CS6 version.

bmfm_ wrote:
I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
Hi bmfm,
I think I know what's going on. The behavior you describe happens when you try to edit back into your original sequence. Can try making a new sequence to cut your selects into? See the page in help for details: http://helpx.adobe.com/premiere-pro/using/edit-sequences-loaded-source-monitor.html
Thanks,
Kevin

Share point in server admin not working correctly... I think

I suspect that the share point in server admin is not working correctly. In workgroup manager when I click on a user and then click on the "home" tab, under the full path field I see a file path of:
afp://server.mydomain.com/Users
However if I go to Server Admin -> AFP -> Share Points then click on the Users share and then click on the share point tab below, enable auto mount is disabled. How can this be possible? I thought for a directory to show up in home in workgroup manager it had to be set as an auto mount. Has something possibly corrupted? And what?

Here's a bit more information about our setup and our experiences with Apple's CUPS implementation:
On the server, all printer queues are set up with only lpr and ipp sharing enabled with the PPD setting for each printer set to Generic Postscript. We found that setting the PPD to the printer specific one on the server caused problems when clients tried to use printer specific options, like paper tray selection, etc.. The selection would be undone, apparently because the driver on the server would override the previous settings. Using Generic Postscript allows the client PPD settings to go through unmodified. Our printers are general a mix of HP LaserJets and some Sharp Copiers.
All clients use lpd to the server queues with the printers' actual PPDs configured. Using ipp is superior in that printer feedback (jams, out of toner, etc) makes it back to the clients, but ipp only works when the client, the server, and the printer are on the same network. If the ipp client is not on the same network, the client spooler immediately goes into a paused state and the print job is stuck on the client.
Using lpd to the server queues works reliably, but there is no feedback to the client. Jobs disappear from the client queue and go to the server, appearing to the user as a successful print. If the printer is down, there's nothing they can see or do about it.

Three-Point Edit Missing Frames

Hello,
So I am exerpiance a very stange problem, with a very simple operation, and I have no idea why this is happening. I am using a three-point eidt to cover some heavy breaths in a voice over. I have 20 seconds or so of roomtone loaded into my source viewer. The roomtone has an in point a few frames in (to leave room for a transition) and no out point. On my timeline, I create an in and out point, around the audio I want to cover. The gap I am covering is usually only a few frames, a quick inhale, or weird mouth noise. I have done this, many times no problem.
Today, everytime I overwite to replace the audio on the timeline, the clip is a few frames short of my selection. So, for example, I have a 14 frame selection in my timeline. When I overwrite, PP is only placing 11 frames from my roomtone clip. Again, roomtone is over 20 seconds, loading in the source viewer with only an in point. Timeline as both in and out point, so it's a proper three point edit setup, and the is way more then enough material to cover the selection.
If I have to roll out every clip I cover, it's going to be a long day, so any help would be apperciated. I am using Premeire Pro CC (Version 7.2.1) on a Mac (OS X 10.9.1). I have uses these exact versions before, and not had this issue.
Thanks,
J

This has been a challengeing little problem for me. Each time I think I have norrowed it down it crops back up. That being said I have come up with a work around, that is working consistently. I thought I would share it, incase someone else has the same problem.
The room tone clip I use has video, but normally, don't patch it to the timeline. I noticed that when I did patch the video in, the correct number of frames where placed on the timeline. So I added an extra track above all the others, turned visibility for that track off, and patch the video there. When I was done with that sequence, I simply deleted the extra track.
Still not as good as an actual fix, but much less time consuming then having to adjust each edit.

Three point editing problems

HI,
I am completely new to video editing. I have bought the book "Final Cut Express 4, Movie Making for Everyone, Apple Pro Training Series", and am slowly working my way through it.
I have come to the part about three point editing, but I can't replicate what is happening in the book, and I can't see where I'm going wrong.
I have marked an In point and an Out point on the timeline, and then mark an in (or out) point on the clip in the viewer, but when I drag the clip from the viewer into the timeline it is not constrained to the In and Out points on the timeline, and the full length of the marked clip from the viewer is inserted.
If I mark both the In and Out point in the viewer, and then mark either an In or Out point in the timeline it works OK.
I'm sure I'm doing something quite basic wrong but I can't find out what it is,
Any suggestions appreciated, thanks for reading.
Julie

Thanks a lot, i've just checked the book and it actually says that, I must have overlooked it, I guess I should read a bit more carefully.

Three Point edit question?

I have duplicate sets of source materials. One is the original GoPro fisheye-distorted camera shots. The other set all have the identical clip names, but are processed to be fisheye-free.
I've edited the fisheye shots into an edit, then I want to replace all shots in a duplicate of that edit, including some that run at non-realtime speed or are cropped or have stabilization applied or have been tonally altered or run backwards--all while retaining those qualities.
I can find and Mark a point in the original clip within the fisheye edit that is easy to identify and Mark in the set of flattened version clips. It would be handy to call this a "sync point" and use it to assist in dropping the flat version clip right smack where the fisheye clip was, but that doesn't seem to be what 3-point does. Or I am missing something major? I want that sync point to drive the match between the already edited clip and the incoming processed version of the same clip to respect its in and out points. My work around is to lay the incoming, flat shot's sync point above the original clip, then trim ends to fit, but that takes more time than a presumably easy sync-edit would take.
Also, I want to keep the altered speed and backwards attributes that were applied to the fisheye edit. How do I reverse a source clip--or change its speed before dropping it over the fisheye clip in the timeline? The only way to sync a reversed clip I've found is to select the edited clip, bring in the new, replacement clip above it, reverse the incoming clip, match the sync points and trim, as above. Is there a way for an incoming clip to inherit everything at once?

If you really, truly, scouts honor have two duplicate sets of source clips, where the only difference is on set has had the distortion removed - but in all other aspects (except filename can be different) are the same - then you are going about this all wrong.
In FCP7, make a copy of your project by saving it under a different name, such as "Project - video fixed". Then, working on the copy project:
Select the sequence where you want to replace the fisheye footage in the Browser, then once selected, control click on it.
From the drop down menu choose Reconnect Media.
When the Reconnection Pane opens, use the Locate button to reconnect each source file FCP asks you to reconnect (they will have an underline under the file name in the Files to Connect box) to that files matching file that has the distortion removed. If they have matching file names, once you navigate to the directory that contains the corrected files, you can use the check box for "Reconnect All Files in Relative Path" to let FCP find all the matches.
Once you have reconnected all your source files, the sequence will now have all the distortion corrected files in it with all your effects, speed changes etc. applied.
The only effect I would worry about not working correctly is the smoothcam shots, the stabilization may not be the same for the corrected clips.
Again, this only works if the source file and reconnected file match identically in terms of length, frame size, etc.
MtD

HT201365 my text to send messages is now not working correctly after upgrading

Since upgrading last week my text is not working correctly it is very slow does not show the letter being used and takes seconds to be put in

Looking into the Diagnostics and Usage Reports in 'Settings' -> 'General' -> 'About' I see nine different "ExcResource_MobileMail_DATE" reports. Looking at the report I see a SysInfoCrashReport that indicates that the CPU was pegged at over 50% (mostly over 75%) for over 180 seconds using the MobileMail app.
I also see a "MobileMail_DATE" report that indicates that there was an 'Exception raised during monitored invocation of _loadMoreMessagesWithMaxVisibleIndexPath:maximumIndexPathsBySource:, exception: ** -[__NSArrayM objectAtIndex:]: index 4294967295 beyond bounds for empty array"
And finally I see three "stacks+MobileMail-DATE" reports with "Power assertion timeout for 'com.apple.message.fetchMobileSynchronously...' Simply resetting it now." and "Power assertion timeout for 'com.apple.mobilemail.messagebodyloader' Simply resetting it now" reports.
I updated to iOS 7.0.4 and decided to try and delete the account in my Mail settings and recreate it and set it to manual instead of the non-working fetch. Now, when I try to check my mail it still takes up to five minutes to respond, pulling the screen to refresh brings up the spinner for about one second and then disappears and no indications of activity occur until about three minutes later when I see the spinner in the status bar near the clock and then see a notification that it's downloading X of Y messages. At that point, message headers come in very quick and then about a minute later message previews come in. At random times, opening the mail app I get a "Password incorrect" error, even though the password works on other attempts.

I have OSX 10.7.5, my idvd is not working correctly. Should I re-download this version again , do you think that it will help to improve the idvd operation?

I have OSX 10.7.5 on my imac, my idvd is not working correctly. Should I re-download this version again , do you think that it will help to improve the idvd operation?

First, iDVD is not and never has been part of OS X. If iDVD is not working correctly, then you should investigate possible problems with that application, support files, preferences, or cache.
Of course you can always reinstall OS X if you wish:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

Hi Friends,
We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY.
We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
lw_fieldcat-lzero = space.
lw_fieldcat-no_zero = 'X'.
After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
We are using SAP ECC 6.0.
Friends, can you clarify the about doubts. It is surprising for me.
Kind regards,
Jegathees P.
Our customer is asked to remove the leading zeros for the numeric field

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Key Figure calculation in Abap is not working correctly - Overlooping

Hi,
I wrote a logic to calculate the ratio of key figure but it is not working correctly
For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
Sample
A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 = 200
PRODUCT3 0.7 = 1000 * 0.7 = 700
The total amount of this new products is 1000.
Now my logic is working this way.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
Logic used
DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
DATA: amount LIKE data_package-netamount.
DATA: zidx LIKE sy-tabix.
REFRESH t_data.
LOOP AT data_package.
zidx = sy-tabix.
MOVE-CORRESPONDING data_package TO t_data.
REFRESH t_newdso.
SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
data_package-prod.
SORT t_newdso BY prod.
*LOOP AT T_NEWDSO.
READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
IF sy-subrc EQ 0.
    LOOP AT t_newdso.
      t_data-prod = t_newdso-/bic/znew_mp.
      t_data-material = t_newdso-material.
*T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
      APPEND t_data.
    ENDLOOP.
ELSE.
    REFRESH t_olddso.
    SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
    data_package-prod.
    SORT t_olddso BY prod.
    READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
    t_data-prod = t_olddso-prod.
    t_data-material = t_olddso-material.
    APPEND t_data.
ENDIF.
MODIFY data_package INDEX zidx.
ENDLOOP.
REFRESH data_package.
data_package[] = t_data[].
thanks
Edited by: Matt on Sep 27, 2010 2:25 PM - added tags

Hi,
I am not really good at debugging Abap code since I am a newbie. however I have tried to add CLEAR T_DATA before the first loop.
REFRESH T_DATA.
LOOP AT DATA_PACKAGE.
ZIDX = SY-TABIX.
MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
and before the second loop and select statement and at the end of the loop.
REFRESH T_NEWDSO.
SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
DATA_PACKAGE-PROD.
SORT T_NEWDSO BY PROD.
READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
IF sy-subrc EQ 0.
LOOP AT T_NEWDSO.
but then not all data are being fetched.
thanks
Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

Email pushing not working correctly for office email - 3 seperate devices/carriers

We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
User 4 is on the older nextel blackberry push to talk, and is not on outlook.
We do not have an exchange server. Our emails were all set up through our devices.
Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
Thank you in advance for any suggestions.
Caitlin Talbot

Potential solution for windows for a side-by-side install. This works for me.
To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
+ Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox 4\firefox.exe
+ Open profile manager. Start > Run : firefox.exe -ProfileManager
+ In profile manager create Two Profiles.
firefox3.6
firefox4
+ In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
+ Create two windows shortcuts.
* General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
* General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
That's it. Links from external programs should now open in your default browser.
Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile]

Substitution rule is not working correctly

Hi PS Gurus,
We have a problem in one of the newly created projects that the substitution rule is not working correctly; the data is not copied to the WBS element Cust. Enhancement tab.
Project 1 is working fine and the data is copied & Project 2 and Project 3 are not getting all the data copied to the WBS element,
In that project profile (substitution rule is given), substitution rule is also maintained
So please help why in one project substitution rule in working & other isnu2019t.
Many Thanks in Advance.
MM

Hello Menaka,
Select the WBS element in the project builder.
Cleck on Edit --> Validation Substitution --> Substitution
You will get the list of Substituitions, Double click on the required Substition rule.This action will generate a log, whether substitution has been succesfully caried out or with some error.
Kindly provide us that error log to guide you further.
Regards
Ravi

Three Point Edit not working correctly :(

Similar Messages

Maybe you are looking for