Three Questions about CS6 Bridge and Photoshop and CR2

1.I Upgraded CS6 to my computer. Old Version was 5.5 and Bridge was 5.1. Why the CR2 filer doesn´t all show in thumbnails and no image is shown in the right window where you can check the picture. The CR2 files are shot with Canon 5D Mark II. Also Photoshop doesn´'t show the prewies when you try to open. In 5 version these weren´t problems.
2. Why Bridge doesn´t show the pictures color profile in metatada, it says Untagged. The images are shot in Nikon D3000 camera. It shows it in Raw file.
3. Why some pictures show little unfocused in Bridge but when you go o raw, it is sharp. The sharpen little checking window in Bridge shows 200%?
and finally
4. I think that now when I have two CS versions in my computer they slows it down. Is it okay to burn the CS5.5 files in DVD and then uninstall it?

Two versions on the same computer will not have any effect. They are seperate programs and will not interfere. Best to leave as is.
In CS6 click on Help/about plugin/camera raw. You should have version 7.1 there.
What OS?

Similar Messages

Questions about iMac Core i7 Photoshop and Capture One performance.

Hello Everyone,
I am in the market for a new Mac and was thinking about the iMac Core i7.
Now my question is, how the performance in Photoshop is for that machine ?
I work on 24 Mpix raws and occasionaly on 30-40+ Mpix raws from Medium Format cameras.
My files quickly get up to 100 layers and I only work in 16 bit, so I am a little bit concerned if such an iMac would meet my expectations and the files get 1, 2 or 3 GB big. I would definately pump as much RAM inside as possible to get more speed.
What are your experiences ?
And the other thing I would like to know is how Capture One performs on that machine regarding tethered shooting and Batch Processing files into Jpegs ?
Thank you in advance !
Cheers,
Martin

Thank you guys for your answers.
If I am going to buy that iMac i definately would buy some Kingston Ram, not the apple one way too overpriced.
I am also concerned about the R/W speed of the iMac. What are you experiences with FW drives as Raid-sets ?
I also can't wait for CS 5. The 64 Bit version would definately speed up things and photoshop could finally access more than 3 GB of RAM and hope this will end my concernes about scratch disks.
@Wade: Partitioning the internal hard drive and using the second partition as scratch disk is not good. The needle of the drive would go crazy skipping between partitions.Never have the scratch disk on the same disk as photoshop. Also it would decrease your hard drives lifetime.
Cheers,
Martin.

Question about CS6 Design Standard Student and Teacher Edition

I'm planning to buy this package but there is a couple questions I need to know before I do that. It's little hard to find all necessary information from Adobe's web page and I find it kind of difficult that you can have help only in english. I live in Finland.
1. When I'm proving my student eligibility for Adobe, does the document/documents have to be written in english or is it ok in finnish?
2. How do I get my final serial numbers if Adobe can't send them via email?

If you are from Finland, you will probably have to submit all the stuff to your local reseller. This has nothing to do with the online verification for US and other customers. Check your regional S&T pages. Presumably you have to go through Sweden, because as far as I know that's where Adobe has it's support for Northern Europe. They will also give you the serial number.
Mylenium

If I don't know how to use mini bridge in Photoshop and InDesign.

I tried to use mini bridge from photoshop and inDesign both but unsuccessfully. Displays message "Waiting for Bridge CS5..." and it seems for hours and hours but not working... .
But Adobe Bridge is working perfectly. Does anyone has the same problem?

So, I have the same problem with the mini bridge not loading. I noticed it also wouldn't load at my school on their Mac computers, too. I wondered if it had anything to do with me only having the free trial but the school's computer isn't free trial. I looked at the two solutions you've provided.
1. When I went to the following...
Win 64 bit machines: \Program Files (x86)\Common Files\Adobe\SwitchBoard\SwitchBoard.exe
There was no SwitchBoard folder, or SwitchBoard.exe on my computer anywhere... (Windows 8 64 bit)
2. I then tried to see about your second solution and followed the link... it doesn't support my computer version ><
So I'm not really sure what to do since I need to get this working in order to complete my class assignment.... I am using the free trial at the moment but plan to buy the monthly plan through Adobe Creative Cloud for Photoshop, InDesign and Illustrator.

Here's a very basic question about 2 TB external drives and Time Machine.

Here's a very basic question about 2 TB external drives and Time Machine.
Ihave a Mac Pro with a .75 TB and 1 TB drive. It also has a 1 TB 2ndinternal drive. My current external drive is too small so I'll begetting a 1.5 TB or 2 TB drive.
Obviouslythe new larger 2 TB drive will backup everything on the Mac Prointernal drive with Time Machine. But there will be 1 TB of space leftover going to waste.
ShouldI partition the external drive so that the TM portion will be 1 TB andthe use the remaining extra partition for additional file backups withCarbon Copy?
Thanks for any insights.
I tried searching around on the new Apple discussion forum, but I find it much harder to use than the old forum I used to use.

The problem with terabyte drives is that that a 3 TB is about as big as you can get without going into RAID territory. Ideally, a Time Machine drive should be 3 times as large as all the drives you are backing up. So, if you have 2.75 TB of internal storage, you should have 8 TB of Time Machine space.
Of course, that is "should". If your TB drives are mostly empty, then you can get away with something 3 times the size of your used disk space. Just remember that you are pushing it. Linc is right about Time Machine needing space to work.
It is unlikely that you have regular churn on 2.75 TB of disk. I suggest identifying which drives and folders have the most activity and excluding those drives and directories that don't change much. It would be better to archive the data that doesn't change often and keep it out of Time Machine. Then you may be able to get away with a 2 TB Time Machine drive.

Question about 2 TB external drives and Time Machine.

Here's a very basic question about 2 TB external drives and Time Machine.
I have a Mac Pro with a .75 TB and 1 TB drive. It also has a 1 TB 2nd internal drive. My current external drive is too small so I'll be getting a 1.5 TB or 2 TB drive.
Obviously the new larger 2 TB drive will backup everything on the Mac Pro internal drive with Time Machine. But there will be 1 TB of space left over going to waste.
Should I partition the external drive so that the TM portion will be 1 TB and the use the remaining extra partition for additional file backups with Carbon Copy?
Thanks for any insights.
I tried searching around on the new Apple discussion forum, but I find it much harder to use than the old forum I used to use.

John,
I'm not sure why you posted in the iMac forum so I'm going to attempt to get you to the correct spot. I would recommend reposting in the Time Machine Forum, this is part of the OS X forums (Leopard or Snow Leopard) because you are using Snow Leopard (your profile indicates you are) please click Apple Support Communities and type Snow Leopard. Then you can narrow the search down by clicking Refine this List.
Roger

Question. CC for Lightroom and Photoshop and, in say 5 years or so, become inactive.

What access would I have to my photos if I sign up for CC for Lightroom and Photoshop and then become only an occasional user. Will I still be able to find my photos using Lightroom? Will I be able to search for photos using keywords? Will I be able to see metadata?
Thanks.
Fritz Schafer

Dave Merchant wrote:
If you stop subscribing, the software stops working.
This aspect is indeed going to be a rude awakening for many users some day.

Few questions about cs6

Hi
i have few questions about cs6
is there a way to let the ruler and straighten like cs5 ? i gave a look to my friend cs6 and cs6 ruler and straighten leave transparent image around the corner
and is there a way to set for each adjustament layer a size ? for example i like a big curve window but for example have a smaller level windows
thanks
cheers

mantralightroom wrote:
nope
The feature is there, where Christoph described it, though I would have liked it if they'd left an option for the Ruler Tool button to allow people to add "and crop" as well. But Adobe have confirmed they moved it out of there on purpose, presumably because new users would expect to crop their image using the Crop Tool, not the Ruler Tool.
mantralightroom wrote:
i would like to know if i can store the size of each dialog window
You MUST be talking about the Properties panel, where adjustment layer info is shown, because the dialogs you get when you do things like Image - Adjust - Levels or Image - Adjust - Curves is not resizeable in any way I can see. At least not on a PC.
No, there's no special option that allows dialog sizes to be saved separately. It's just one panel, and the size of the panel itself defines the size of the contents up to each of their max sizes.
-Noel

I have three questions about managing my music library

Hello,
I have three questions about managing my music library, I hope you can help me with them:
1) Is there a limit of how many entries, songs, albums, art work, can iTunes handle? I have a hunch iTunes is like a database program and am curious about its capacity. I have two 2-TB drives and am wondering what is going to happen when I fill these two drives up. Other than disk space, what are iTunes limitations?
2) Talking about these two drives. How can I use both as a source for my iTunes library. Can I have two folders selected as the source of my library? I am not sure if I have enough disk space to hold all my music, but I do also have a 1TB almost empty drive is need be.
3) OK now comes te real question. I am sure that I have duplicates in my library and I sure would love to clean my library up.Possiby if I do get to clean it up, I can save some disk space and that is always a good thing. Any good techniques, software, techniques to follow while ripping music to help keep my library organized. Please be as detailed as you can.
Thanks and I can't wait to hear from you.
Waseem

Wassimn wrote:
Hello,
I have three questions about managing my music library, I hope you can help me with them:
1) Is there a limit of how many entries, songs, albums, art work, can iTunes handle? I have a hunch iTunes is like a database program and am curious about its capacity. I have two 2-TB drives and am wondering what is going to happen when I fill these two drives up. Other than disk space, what are iTunes limitations?
As far as I know you're going to run out of disc space before you hit any limits. Each object in iTunes has a 64-bit key to access it. That said as your library grows it will get less responsive as bigger indexes take exponentially longer to process.
2) Talking about these two drives. How can I use both as a source for my iTunes library. Can I have two folders selected as the source of my library? I am not sure if I have enough disk space to hold all my music, but I do also have a 1TB almost empty drive is need be.
iTunes wants to manage everything inside one big folder. Some idiosyncrasies with the way it manages things if you have to move to a new drive means it is best if you can stick to that plan. If your library grows larger then you'll have to take manual control of where some or all of your content is stored. I use a variation of a script called ConsolidateByMoving which you could adapt for your needs.
3) OK now comes te real question. I am sure that I have duplicates in my library and I sure would love to clean my library up.Possiby if I do get to clean it up, I can save some disk space and that is always a good thing. Any good techniques, software, techniques to follow while ripping music to help keep my library organized. Please be as detailed as you can.
When it comes to deduping I've written another script for that called DeDuper, see this thread for background.
And for some general tips on getting organized in iTunes see Grouping tracks into albums.
tt2

Three questions about a single-folio publication

We are finishing our first publication with DPS.
We have a Adobe DPS Professional Edition, Annual version.
1- I have been planning to launch the App in iPad and Android for free and in three days to put the price at $9,00. Is that possible?
2 - How much time needs Apple to approve our appliction?
3- I have read that you can't publish a single folio app in Android. Why?
What is the option

On android a .apk app is limited to 50 mb. Additional Content up to 4GB can
be loaded by the app on its first start.
This need a change in workflow for the android version on the viewer side.
And it may be political, too.
—Johannes
(mobil gesendet)
Am 17.01.2012 02:32 schrieb "Bob Bringhurst - Adobe" <[email protected]>:
Re: Three questions about a single-folio publication created by Bob
Bringhurst - Adobe <http://forums.adobe.com/people/BobBringhurst-+Adobe>in
Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4145193#4145193>

I want to change my secret questions where I had forgotten the answers to three questions about safe

I want to change my secret questions where I had forgotten the answers to three questions about safe

The Best Alternatives for Security Questions and Rescue Mail
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contact Apple support.
    c. Rescue email address and how to reset Apple ID security questions.

HT201303 hi just got my new apple ipod touch i need to update my security information other wise it wont let me download apps it says to enter three questions about myself and i get to the third question and it wont let me enter the third question

hi just got my new apple ipod touch and to download apps it wants to add questions about myself for more sercurity information. i get up to question 3 and it wont let me select a question but it will let me write an answer so i just pressed done and then it says i cant carry on because ive mised out information when it wont let me do a question!

Welcome to the Apple community.
You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

Three questions about Java and Ftp

Hello, i've the following questions about Java and Ftp:
1- .netrc file is in $HOME directory but i can't access to this directory from java code. The following line producesan Exception (directory doesn't exists)
FileWriter file = new FileWriter ("$HOME/.netrc");
2- .netrc file must have the following permissions: -rw- --- --- but when i create the .netrc file the following permissions are on default: -rw- r-- r--, how can i change this permissions? (In java code, i can't use chmod.....)
3- Are there any way to pass parameters to a .netrc file? If i get to do this i needn't change the permissions because i can't modify or create/destroy this file.
Thanks in advanced!!!
Kike

1- .netrc file is in $HOME directory but i can't
access to this directory from java code. The
following line producesan Exception (directory
doesn't exists)
FileWriter file = new FileWriter ("$HOME/.netrc");$HOME would have to be replaced by a shell, I don't
think you can use it as part of a legal path.
Instead, use System.getProperty("user.home");
Ok, thanks
2- .netrc file must have the followingpermissions:
-rw- --- --- but when i create the .netrc file the
following permissions are on default: -rw- r--r--,
how can i change this permissions? (In java code,i
can't use chmod.....)Yes, you can: Runtime.exec("chmod ...");
I need to use estrictly the .netrc with -rw- --- --- permissions
Yes, i can use Runtime.exec ("chmod ..."); but i don't like very much this solution because is a slow solution, am i right?
3- Are there any way to pass parameters to a.netrc
file? If i get to do this i needn't change the
permissions because i can't modify orcreate/destroy
this file.I don't think so. Why do you need the .netrc file in
Java at all? Writing a GUI frontend?I want to use automatic ftp in a java program and FTP server, the files and path are not always the same, so i can:
- modify .netrc (for me is the complex option)
- destroy and create a new .netrc (is easier but i have permissions problem)
- use .netrc with parameters but i haven't found any help about it
Thanks for your prompt reply!!!!
Kike

Questions about ActiveX Bridge and SWT

Hi !
I found few weeks ago the www.reallyusefulcomputing.com site answering my question about Java & Macro of MSWord. Now I've found two steps that I am not able to overcome.
First, when I build a simple application and I have internal libraries to use, am I compelled to place the jars in the lib/ext directory of the Java Runtime Directory? I have many difficulties in placing a convenient class-path in the manifest file. Why does the application ignore the manifest string?
The second problem (and the biggest one) is that I am trying to build an SWT java-bean-application but I have problems during runtime. Is it possible to use this technology for my software or am I compelled to use AWT and SWING?
I really hope you can help me.
Thank you in advance.

hi,
I have to catch events from excel sheet in my java code..events like some change in value or a click of some user defined button etc.I have written th follwoing code but it does not gives me any event.It simply opens the specified file in the excel in a seperate window.but when i click on the sheet or change some value no event is captured by my code....can ne one pls tell me how to go about it....
public class EventTry2 {
     private Shell shell;
     private static OleAutomation automation;
     static OleControlSite controlSite;
     protected static final int Activate = 0x00010130;
     protected static final int BeforeDoubleClick = 0x00010601;
     protected static final int BeforRightClick = 0x000105fe;
     protected static final int Calculate = 0x00010117;
     protected static final int Change = 0x00010609;
     protected static final int Deactivate = 0x000105fa;
     protected static final int FollowHyperlink = 0x000105be;
     protected static final int SelectionChange = 0x00010607;
     public void makeVisible()
          Variant[] arguments = new Variant[1];
          arguments[0]=new Variant("true");
          //Visible---true
          automation.setProperty(558,arguments);
          //EnableEvent--true
          boolean b =automation.setProperty(1212,arguments);
        System.out.println(b);
         public Shell open(Display display){
         this.shell=new Shell(display);
          this.shell.setLayout(new FillLayout());
          Menu bar = new Menu(this.shell,SWT.BAR);
          this.shell.setMenuBar(bar);
          OleFrame frame = new OleFrame(shell,SWT.NONE);
        File file= new File("C:\\Book1.xls");
          try{
          controlSite = new OleControlSite(frame, SWT.NONE, "Excel.Application");
          this.shell.layout();
          boolean a2=true;
          a2=(controlSite.doVerb(OLE.OLEIVERB_SHOW|OLE.OLEIVERB_OPEN|OLE.OLEIVERB_UIACTIVATE|OLE.OLEIVERB_HIDE|OLE.OLEIVERB_PROPERTIES|OLE.OLEIVERB_INPLACEACTIVATE)== OLE.S_OK);
          System.out.println("Activated::\t"+a2);
        }catch(SWTException ex)
             System.out.println(ex.getMessage());
             return null;
          automation = new OleAutomation(controlSite);
          //make the application visible
          makeVisible();
          System.out.println("Going to create Event listener");
          OleListener eventListener=new OleListener(){
               public void handleEvent(OleEvent event){
                    System.out.println("EVENT TYPE==\t"+event.type);
               switch(event.type){
               case Activate:{
                    System.out.println("Activate Event");
               case BeforeDoubleClick:{
                    System.out.println("BeforeDoubleClick Event");
               case BeforRightClick:{
                    System.out.println("BeforeRightClick Event");
               case Calculate:{
                    System.out.println("Calculate Event");
               case Change:{
                    System.out.println("Change Event");
               case Deactivate:{
                    System.out.println("DeActivate Event");
               case FollowHyperlink:{
                    System.out.println("Activate Event");
               case SelectionChange:{
                    System.out.println("Activate Event");
                    Variant[] arguments = event.arguments;
                    for(int i=0;i<arguments.length;i++)
                         System.out.println("@@");
                         arguments.dispose();
          System.out.println("outside");
          OleAutomation sheetAutomation=this.openFile("C:\\Book1.xls");
          controlSite.addEventListener(sheetAutomation,Activate,eventListener);
          controlSite.addEventListener(sheetAutomation,BeforeDoubleClick,eventListener);
          controlSite.addEventListener(sheetAutomation,BeforRightClick,eventListener);
          controlSite.addEventListener(sheetAutomation,Calculate,eventListener);
          controlSite.addEventListener(sheetAutomation,Change,eventListener);
          controlSite.addEventListener(sheetAutomation,Deactivate,eventListener);
          controlSite.addEventListener(sheetAutomation,FollowHyperlink,eventListener);
          controlSite.addEventListener(sheetAutomation,SelectionChange,eventListener);
          shell.open();
          return shell;
     public OleAutomation openFile(String fileName)
          Variant workbooks = automation.getProperty(0x0000023c);//get User Defined Workbooks
          Variant[] arguments = new Variant[1];
          arguments[0]= new Variant(fileName);
          System.out.println("workbooks::\t"+workbooks);
          IDispatch p1=workbooks.getDispatch();
          int[] rgdispid = workbooks.getAutomation().getIDsOfNames(new String[]{"Open"});
          int dispIdMember = rgdispid[0];
          Variant workbook = workbooks.getAutomation().invoke( dispIdMember, arguments );
          System.out.println("Opened the Work Book");
          try {
               Thread.sleep(500);
          } catch (InterruptedException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          int id = workbook.getAutomation().getIDsOfNames(new String[]{"ActiveSheet"})[0];
          System.out.println(id);
          Variant sheet = workbook.getAutomation().getProperty( id );
          OleAutomation sheetAutomation=sheet.getAutomation();
          return(sheetAutomation);
     * @param args
     public static void main(String[] args) {
          // TODO Auto-generated method stub
          Display display=new Display();
          Shell shell=(new EventTry2()).open(display);
          while(!shell.isDisposed()){
               if(!display.readAndDispatch()){
                    display.sleep();
          controlSite.dispose();
          display.dispose();
          System.out.println("-----------------THE END-----------------------------");

I keep getting 'camera raw editing now enabled, camera raw requires that a qualifying product has been launched at least once to enable this feature' i have run photoshop and the mini bridge in photoshop and it works. camera raw in bridge itself keeps giv

I tend to use Bridge ALOT and just recently i have come across the warning message above, t won't let me open my RAW images in Camera Raw in Bridge. Please could someone help me solve this problem it has hulled my work and its pilling up behind me
Thank you

Details, please. Platform, exact version of Photoshop and of your OS, what trouble shooting steps you've taken so far, etc,
First thing to try, if it had worked before, is to Purge the Cache in Bridge.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Three Questions about CS6 Bridge and Photoshop and CR2

Similar Messages

Maybe you are looking for