Three questions...related sharing,updating etc

Sir! I have more than one questions...please solve them
1>I connected my iPad with windows 8 PC through USB wire but I am unable to transfer the matters frm PC to my iPad model A1455..
2>I want to update my ios 6 with ios7..but in setting>general>software update no any link is highlighted..and at this time only400mb data is remaining...is iOS 7 is the size of 1GB on downloading..
3>I have iPad mini of model A1455 and version 6 but I could not find its generation...

1>I connected my iPad with windows 8 PC through USB wire but I am unable to transfer the matters frm PC to my iPad model A1455..
Please explain in more detail.
2>I want to update my ios 6 with ios7..but in setting>general>software update no any link is highlighted..and at this time only400mb data is remaining...is iOS 7 is the size of 1GB on downloading..
Again, please explain in more detail. Don't know what you mean by "no any link is highlighted," and not sure what the issue is.
3>I have iPad mini of model A1455 and version 6 but I could not find its generation...
See Model Identifier Utility

Similar Messages

  • Can someone plz confirm me that how i can change or update the security questions related to my apple id? as i have been never put them since i create my apple id but now due to some security reasons its asking me again and again the answers. i am unable

    can someone plz confirm me that how i can change or update the security questions related to my apple id? as i have been never put them since i create my apple id but now due to some security reasons its asking me again and again the answers. i am unable to go through the process. thanks.

    Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

  • Question related to Synchronous update

    Hi, all
    I have some question related to synchronous update:
    1. What is the syntax if I want to write synchronous update.
    Do i write as:
    call funcition A in update task
    commit work and wait
    Or just
    call function  A (A declared as update type function )
    commit work and wait
    Or ...
    2.If we use synchronous update, is VBHDR,VBDATA still filled the same way when using asynchronus update?
    Thanks in advance,
    Liming

    Hi,
    Why do we use this " In Update Task " ??
    The main update technique for bundling database changes in a single
    database LUW is to use CALL FUNCTION... IN UPDATE TASK.
    How do we Use ??
    A typical R/3 installation contains dialog work processes and at least one update work process. The update work processes are responsible for updating the database. When an ABAP program reaches a COMMIT WORK statement, any function modules from CALL FUNCTION... IN UPDATE TASK statements are released for processing in an update work process. The dialog process does not wait for the update to finish. This kind of update is called asynchronous update.
    What is the Use... ??
    Asynchronous update is useful when response time from the transaction is critical, and the database updates themselves are so complex that they justify the extra system load

  • Sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?

    sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?

    you seem to be referring to an ongoing issue
    click here to respsond -> sir help me to enable my network connection, my iphone 4s is not connecting with any wireless connection, what i should do for enabling network connection?
    CCC

  • Three questions about visual composer?

    Hi all,
    1. what is the relationship between "visual composer and "visual composer BI kit"? what else elements do we need to add on top of visual composer in order to make visual composer BI kit?
    2. If we only do visual composer, the only thing we can't accomplish is the BI query wizard in visual compuser menu, right?
    3. After creating backend SAP BW system connection via BI JAVA CONNECTOR, why do we still need to create backend SAP BW system connection via SAP BI CONNECTOR?
    I went through Scott Cairncross' PDF file "Know how network call SAP Visual Composer & BI kit" and have the three questions above.
    George

    ad 1) BI Kit is a kind of plugin to VC (like the plugins in Eclipse). Today VC and BI Kit are shipped together. Once you have VC, you also have the BI Kit.
    ad 2) BI Kit offers:
    - connectivity to JDBC, ODBO, XMLA, SAP Query and SAP BI directly
    - BI Integration Wizard (to create models in a wizard style)
    - MDX, SQL Editors
    ad 3) The "direct" BI connection uses RFC-calls to BI and offers you more features, like Variables, Queries, query-views, infoobjects, favourites, history, URL port, etc. You can also connect to a SAP BI system via the XMLA-connector. A relational connector (like it is done in the portal) would only give you access to masterdata (infoobjects), but not infocube data.
    Mario

  • Migration and DVD/CD Sharing Update Problem

    Hi, my Mac OS 10.4.11 has a software update on 10-19-2008. It installed the update Migration and DVD/CD Sharing Update, since then, my sharing panel stopped working, I can`t set any option of Services tab and my Firewall tab does not open, it is gray and I can`t click on it. Just Internet tab work now. How can I fix that? Someone had this same problem?

    Hi Kaaru Ando ,
    I can't find how to just ask a question.
    Yes, it can be hard to find... the problem is if there are Categories at the top, you won't see the Post New Topic link, like here...
    http://discussions.apple.com/category.jspa?categoryID=177
    But if you drill down to one Topic, it'll show, like...
    http://discussions.apple.com/forum.jspa?forumID=752&start=0
    For Installation & setup...
    http://discussions.apple.com/post!default.jspa?forumID=752

  • Three questions: new songs, two devices, organizing albums

    I have searched and searched and still have three questions that I can't find an answer to. I hope you guys can help.
    1) I have a few albums that are not organized with each other and are duplicates and such, when I upload to itunes match, will those be organized from apple's database?
    These were songs from cd's, friend's hd, etc.
    2) when I upload new songs in the future from cd's I may buy or put new songs in itunes that I don't buy from apple, are those uploaded to match automatically?
    3) I'm sure this one has been answered already...but,  can my wife and I use the same match library on two separate devices?
    thanks!

    Locate the "DEVICES" menu in the left column of iTunes, and click on the name of your iPod. This should display the "Summary" tab, giving you information about the iPod. Scroll down until you see a check box that says "Open iTunes when this iPod is Connected," and uncheck it. This will stop the iPod from automatically syncing. Good luck

  • I have a question related to patch download using ftp which was working in

    Hi,
    I have a question related to patch download using ftp which was working in Classic Metalink.
    ftp updates.oracle.com allowed to download patches before but now it says the following.
    $ ftp updates.oracle.com
    Connected to updates.oraclegha.com.
    421-*********************** Downtime Notice ************************
    421-
    421-This service was retired as of November 06, 2009.
    421-
    421-****************************************************************
    421
    Is there a way to download patches now using command prompt. I couldn't see category for metalink in forums hence posted here.
    Regards,
    Nagendra Chillale

    Enter the following command where username and password are your My Oracle Support login and password and filename is the patch file name that you copied from the Properties window::
    wget http-user=username http-password=password no-check-certificate output-document=filename "http://updates.oracle.com/Orion/Download/download_patch/<filename>"
    For example, to download patch 7154429 for Linux where the patch file name is p7154429_10204_Linux-x86.zip, enter:
    wget http-user=[email protected] http-password=password no-check-certificate  output-document=p7154429_10204_Linux-x86.zip "http://updates.oracle.com/Orion/Download/download_patch/p7154429_10204_Linux-x86.zip"
    My Oracle Support FAQ ID 747242.5
    Regards,
    Nagendra Chillale
    Edited by: user12023326 on Dec 16, 2009 11:43 AM

  • Three questions about the developer tools

    At my company we have evaluated this very handy tool, and we have only three questions...
    * Will the autocomplete feature be more intelligent. For example pl/sql developer recognize partially written table names and suggest a full name.
    * How to debug and step through the procedures?? This is a MUST!!!!
    * Is it possible to add source control integration (source safe) for the packages/procedures?
    With these features, it will be super!!
    /henrik

    When I was at the VSLive in San Francisco back in February, I spent some time at the Oracle booth and I asked for Source Control also.
    I was told to my happy suprise that lots of other developers had been asking for that also but I was shocked when the Oracle reps told me that they didn't understand why people would want this feature or how they would use it. They tried to convince me that "Generate Create Script" was what I wanted.
    Btw, "Generate Create Script" ticks me off. It always sticks the package owner in the create script and when I check it back in VSS I have to go in and edit it back out!!!
    It seems to me that the mindset behind many Oracle tools is to work "on the database". I will admit that I don't use many Oracle tools. I used Procedure builder a few times but thats about it. To me it seemed pretty clunky, but it was nice to be able to debug a stored procedure. Or it was until you crashed the SP and it became locked in the database and un-updatable without a bounce ;)
    Most developers that I know, prefer to work "on their hard-drives" and publish to the database or some variation on that.
    I would love to see a tool for editing SPs and Packages where I could check out my code, make a change, compile it on the DB, and check my changes back into the source control. One more catch, we use VSS's ability to update the version number in a source code file on check-in so the version that ends up in the DB should have the "new" version number in the comment header.
    Also, the "Auto Code Generation" tool is not geared towards the type of code I write. I thought we were supposed to get away from writing data access code in our forms? Yet, this tool throws all kinds of stuff in for doing just that and no tools to make it easier (that I could find) to create a data acces layer for wrapping my stored procedures and packages. Where are these tools, Oracle? Help us write better code, not worse.
    The autocomplete is nice, but I have trouble with it. For example, if I type a table name and "." it will bring up all the columns in the table. If I type "R" it scrolls to the first column that starts with "R". But if I type "S" next, instead of scrolling to the first column that starts with "RS" it spits out the currently selected column and sticks an "S" on the end. Other times it doesn't work at all.
    The "Query" window is next to useless. It should work more like a SQL Plus (DOS) window. Or at the very least more like a SQL Server Query Analyzer Query window. I'll keep my SQL Plus until this is way better.
    Hopefully the next version (or 2 or 3) will be better. I hope Oracle is listening. They did acknowledge that other developers were asking for some of the same improvements.

  • Question(s) about updating to iOS 5.1.

    Hi everyone! I have a few questions about updating my iPod to the iOS 5.1.
    First question:
    How long will it take? I have used about 8GB worth of memory on it but I have good internet speed.
    Second question:
    My main computer that I originally had everything set up with doesn't want to work good at all with iTunes, so I switched everything over to my grandma's
    computer. So the question is, what will happen to all my music, apps, etc. if I update using my grandma's computer?
    Third question:
    Do I need to transfer my photo's over? I have over 1,000 photo's on my iPod and I was wondering if I updated would I need to transfer them to the computer
    or if they'll manually stay on the iPod.
    Fourth Question:
    If I update, will I be able to do future updates on the iPod itself without everything being erased like it is with past updates?
    Fifth and final question:
    Is the kinks in iOS 5.1 worked out yet? I remember when iOS 5 came out they had a miserable time with it and everyone wasn't too pleased, so I'm wondering if
    it'll do me any good to update?
    I know I sound like a noob, but the last update I did was iOS 4.2 and I don't like doing updates because they take forever with putting everything back on the iPod. They also worry me a bit because I don't want to lose my music and apps (yes I back the iPod up every few downloads but it still worries me lol). Thanks

    GfxQueen4357 wrote:
    Hi everyone! I have a few questions about updating my iPod to the iOS 5.1.
    First question:
    How long will it take? I have used about 8GB worth of memory on it but I have good internet speed.
    Downloading the update file can take an hour or more. After it is downloaded the actual update should take between one and two hours, likely closer to one hour.
    Second question:
    My main computer that I originally had everything set up with doesn't want to work good at all with iTunes, so I switched everything over to my grandma's
    computer. So the question is, what will happen to all my music, apps, etc. if I update using my grandma's computer?
    If all the media is on Grandma's computer and in the iTunes library and the computer authrized for the iTunes accounts used then the media will be restored to the iPod during a latter stage of the update if you:
    - Connect the iPod to the computer and and make a backup by right clicking one the iPod under Devices in iTunes and select Back Up. Then restore from that backup. The restore will also do the update.
    Note that the backup that iTunes makes does not included synced media like aps and music.
    Third question:
    Do I need to transfer my photo's over? I have over 1,000 photo's on my iPod and I was wondering if I updated would I need to transfer them to the computer or if they'll manually stay on the iPod.
    If the photos were taken by or saved to the iPod they are in the backup that iTunes makes.  If they were synced to the iPod you have to move them from the old computer to grandma's computer. There are third-party programs that will copy synced photos from the iPod to a computer but you have to pay for them.
    Fourth Question:
    If I update, will I be able to do future updates on the iPod itself without everything being erased like it is with past updates?
    With iOS 5, you can do subsequent updates on the iPod itself via wifi. Nothing is lost (unless something goes amiss)
    Fifth and final question:
    Is the kinks in iOS 5.1 worked out yet? I remember when iOS 5 came out they had a miserable time with it and everyone wasn't too pleased, so I'm wondering if
    it'll do me any good to update?
    I have no problems with iOS 5.1. It is improved over iOS 5 and 5.o.1 with the except that sometines the iPod will crash when you try to edit a photo you took.
    I know I sound like a noob, but the last update I did was iOS 4.2 and I don't like doing updates because they take forever with putting everything back on the iPod. They also worry me a bit because I don't want to lose my music and apps (yes I back the iPod up every few downloads but it still worries me lol). Thanks
    The following also tells you what will happen when you update another than the syncing computer. If you follow with what I said above, it will be the same as updating on yur syncing computer.
    iOS 5: Updating your device to iOS 5

  • TS1702 can't get past logging in the three questions

    can't login can't get past the three questions

    I have the same kind of problem here in Paris, France.
    I answer the first time these 3 ready-made stoopid questions 3 days ago, and now each time I've got 3 differents ready-made stoopid questions to answer. Stupid loop and I can't access my account, nor buy tracks or apps nor make updates on the Mac and iPhone.
    Apple iTunes hotline just told me they are sorry about that and that I've to wait for them to fix the problem.
    three questions / security questions / iTunes Store

  • Firewire module install with rpm not updating "/etc/grub.conf" file

    Hello,
    Thank you in advance! I am trying to setup Oracle10g RAC on RedHat Enterprise Linux ES 4.0. As a part of that process, I am trying to install the shared disk (Firewire) module on the node using 'rpm' as follows:
    rpm -ivh --force oracle-firewire-modules-2.6.9.EL-1286-1.i686.rpm
    It is getting installed perfectly. However, I am expecting with "-ivc" option, it is supposed to update "/etc/grub.conf" file. But it is not updating this file. Therefore reboot could NOT load this module and can not proceed further. Any help on this is really appreciated!
    Thanks again,
    Kishore

    karol's link did the deed!  I had gone to the page that shows the most up to date mirrors and used that for the install. But when I used the link that karol gave it not only gave me the same URL as I used earlier to install, it gave me some additional suffixes that didn't appear on the page that provided the updated links. When I added /$repo/os/$arch, pacman took off and started burning rubber. So many thanks!
    Now I can go ahead and install reflector, which is the first thing I try and do when I get an Arch install up and running. Thanks again.
    After seeing karol's script in post#4, I see that the /$repo/os//4arch was showing up there also. I didn't see anything like that when I copied the link to install.
    Last edited by pottzie (2012-03-14 02:42:28)

  • Eternal ball, flashing question mark, kernel panic, etc... all! HELP!

    Think this is a good, one... Here is the story:
    Some apps will crash, that always happens, right? So I did not pay much attention to it until it was way too often. Learned about disk utility, repaired permissions on a regular basis and moved on. But then... One day disk utility told me there was something that could NOT be repaired. I ran and bought an External HD (usb.. not a good choice, but I found out that too late for an exchange). Backing up from there on was kind of a weekly thing.
    But nothing to worry about, I could still use my iBook pretty well and with no problems. Then... one fine day I could not SAVE ANYTHING! Everything was working "normal", but when I wanted to save my work. It told me that I could not do it! Not even making a new bookmark from Firefox!
    So I did verify and repair from disk utility, and I ran the hardware test giving me the following:
    *ERROR CODE: 2STF/8/3:ATA -100 ata -6 -Master*
    I have no idea what that means, but I used it to look for help online and everything pointed out that my HD needed to be replaced. I believe at this point is when I met the flashing folder icon with the question mark. Suddenly it would not detect the HD! But then... after turning it off and on for a few times it would see it and start-up normally. In one of those lucky start-ups I backed up all I thought was important in the external HD and made a clean install of OS X. Oh... and it is fun to try to install OS X when.. there is no HD in the list to pick for your destination! After a lot of patience, it would show up, but then is when I met the kernel panic mesg! After a few more tries (yes, I am a very patient person... sometimes), I finally could make a clean install of OS X. I even partitioned the HD to make sure there was nothing there.
    Ok... seemed like it liked it.. but after a little while, strange things happened again, and after the restart, the blinking folder with the question mark again...
    So... no choice, have to replace my HD right? I get a brand new Seagate, 120 Gb, 5400 rpm. Followed instructions from ifixit.com and after 3 hours (and a lot of fun!) I replaced the hard drive on my beloved iBook. This was really fun!
    Installed the software on the new HD.. everything looks fine... for a few minutes. I tried to use right away what I use everyday to see if it works: web browser, iTunes, Activity Monitor, played a dvd perhaps, etc... And..? Nop... started crashing again... Got the blinking question mark after restart, etc. But now.. the hardware tests reports me no problems.
    Ok... it was not the HD, but I already bought one, and installed it myself!... lets move on and see where is my problem.
    Could it be the ram?
    This model has only one slot of removable ram, and a built-in DIMM that I cannnot replace +(or can I?)+, so I remove the one I can, and restart it without it. First it looks fine again, everything is working, but after a while it starts crashing again. So.. it's not the ram... or at least it's not +this one+.
    So... I think its time for a Professional to take a look at it, right?. So I took it to a Mac Store (not Apple store) and explained EVERYTHING to the guy that received my beloved iBook, he takes notes and tells me that it has to stay for a few days. After 1 week I receive a call from the store (another employee) telling me the sad news that my HARD DRIVE NEEDS TO BE REPLACED! And that they were very sorry but they cannot recover any of my data... what data?? All that was there was the OS!!!
    So... a deep breath and I explain to him everything over the phone. Ok.. he says he will talk with the tech-guy and I'll hear from them in a few more days. I did...
    I was very glad to hear it was a cable that connects the HD to the Logic Board (that's what I understood.. I think). That this was only 20 dollars, but somehow, with the labor I ended up paying around 100 dlrs! I found out later that apple changes this cable everytime they upgrade a HD.
    Ok.. 200 dlrs spent already ($100 on my Seagate HD + $100 for the cable..), but if get my iBook to work again I'll be happy.
    So I go home and start to work on installing and making everything work again: firefox, iTunes, fugu, tried cyberduck, taco, ... everything looked fine. But after a while... it happened again. Sometimes I don't even get the blinking folder, just a grey screen. I turn it off, and then comes the blinking '?' or it starts-up... and if it does, after a while it would crash.
    (I started this post on my iBook, and I was like 2/3rd's through when I got the ball... and no response at all... tried force-quit... and nothing, had to power off..AND start this post all over again on my girlfriend's!!! )
    So here I am... Of course I want to take it back to the guys at the MacStore and
    complain about their poor job... But does anyone here has a good idea of what could it be?
    My thoughts are something like this: Seems like if you do not use a lot of memory (I only have 512 Mb total, so a lot of it comes from the virtual, right?) it works fine, but somehow if it reaches a point where it needs more than a certain amount it would crash. I dont know if this even makes sense, but that's my feeling. The guys at the MacStore told me that they tested around 100 times restarting the computer and it looked fine, so yeah... if all they did was use a software to restart once and again, and again... without really using the memory, they would not see the problem, right? The problem comes later.. when you use the iBook.
    Could it be then that the problem comes from the ram that is built-in? If so.. can this be replaced? Is it worth it? Can I do it myself?
    Too many questions...
    Any thoughts would be more than welcome and...
    Thanks for reading all the post!
    E

    yeah....
    the problem is that I do not have a firewire external HD, and it will not boot from my usb external...
    Anyway... I am back from the MacStore and the guys told me that the next step would be to replace/work on the logic board, and that that was too expensive a job to do an an old iBook like mine, they did not recommend it to anyone (they told me they charge between 600-800 dlrs for this kind of job).
    So... seems like my iBook is in a very bad shape.
    I saw DT&T online and it seems like they do the job for half the price of the MacStore (before shipping costs), but... still, is it worth it?
    I was thinking in the possibility to find someone who sells a used iBook in pieces because of a crashed screen or something, to get another logic board and try to replace it myself, but... is this something an amateur can do by himself?
    Haven't checked ifixit.com for that yet.
    Any ideas??
    Thanks..
    Edgar

  • Question related to Java Concurrent Program

    Hi Friends,
    I have a basic question related to Java Concurrent Program in the Oracle application. I would like to know the how Java concurrent program is executed in Oracle applications.Also, want to know where can I find the document for the AOL packages for Java concurrent program. Document for packages like oracle.apps.fnd.cp.request.* , oracle.apps.fnd.util.*.
    Please let me know.
    -Thanks,
    Satya

    You may also check:
    Note: 250964.1 - How to Register Sample Java Concurrent Program
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=250964.1
    Note: 186301.1 - How to register and execute Java Concurrent Program ?in Oracle Applications R11i?
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=186301.1

  • I have just come back from morocco where my phone worked ok using the morroco network, but since returning to the uk I can't get it to pick up a signal from the 'Three' network, have tried resetting etc but still wont work, any suggestions

    I have just come back from morocco where my phone worked ok using the morroco network, but since returning to the uk I can't get it to pick up a signal from the 'Three' network, have tried resetting etc but still wont work, any suggestions

    banannaphone,
    Welcome to Apple Discussions.
    Quit Safari, find the com.apple.Safari.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder, drag it to the Desktop, log out/in or restart and let us know what happens.
    ;~)

Maybe you are looking for