Three status lights keep flashing

I was using my Airport extreme, it was a-ok, then the power went. When the base station came back up all three status lights starting flashing rapidly and simultaneously and since then i cannot get any signal from the base station. I've tried to unplug for 5, 10, 60 mins then re-plug....it still goes back to the same situation. I had this problem before when i just got this replacement base station and usually after unplugging the power chord and waiting for say 1 minute, then plugging it back in, the flashing stopped and the base station started sending a signal again. Except this time all three signal lights continued to blink after re-plugging. Can anybody help at all..I could use some suggestions..I have already tried using the re-set button, it doesn't work. Airport admin utility cannot pick up the base station because there is no signal coming from it..I've checked the manual and it says that the base station has failed its power on self test...what can i do now...I had asked this question b4 when it was initially giving trouble (and i didn't have a manual handy) and was told that it should b ok..that was when i had the chance to return it to an apple-authorized service provider....now i don't so i would like to know what to do....this is a replacement base station!
Power Book G4   Mac OS X (10.4.3)  

All three status LEDs flashing means the device has failed its power on self test:
http://docs.info.apple.com/article.html?artnum=107457
...and you need to get the base station serviced.
Hard to know exactly what happened to your Base Station "when the power went" as you described it. Sometimes the line power spikes that occur immediately before or during a power failure can damage electronic devices.

Similar Messages

  • Three status lights keep flashing on the base station

    I was using my Airport extreme, it was a-ok, then the power went. When the base station came back up all three status lights starting flashing rapidly and simultaneously and since then i cannot get any signal from the base station. I've tried to unplug for 5, 10, 60 mins then re-plug....it still goes back to the same situation. I had this problem before when i just got this replacement base station and usually after unplugging the power chord and waiting for say 1 minute, then plugging it back in, the flashing stopped and the base station started sending a signal again. Except this time all three signal lights continued to blink after re-plugging. Can anybody help at all..I could use some suggestions..I have already tried using the re-set button, it doesn't work. Airport admin utility cannot pick up the base station because there is no signal coming from it..I've checked the manual and it says that the base station has failed its power on self test...what can i do now...I had asked this question b4 when it was initially giving trouble (and i didn't have a manual handy) and was told that it should b ok..that was when i had the chance to return it to an apple-authorized service provider....now i don't so i would like to know what to do....this is a replacement base station!

    Kurt,
    You posted in the AirPort Express forum. You would probably get better help/suggestions from the AirPort Extreme forum.

  • My Time Capsule doesn't want to (hard nor soft) reset, and the status light keeps flashing quickly.

    About two weeks ago, my Time Capsule's status light was flashing rapidly orange/green simultaneously.
    Unplugging the power supply worked.
    However, now this trick doesn't work anymore, and a soft nor hard reset of the Time Capsule doesn't work either.
    The Time Capsule can't reset anymore, doesn't send out WiFi-signals, and its status light keeps flashing rapidly green/orange simultaneously.
    Thanks for your support.
    Zander.

    What model is the TC? Please give the number from the base, A1xxx.
    It sounds like the reset has been forced in and is not releasing. I think whatever the problem is you will have a hard time fixing it.. it will need replacement .. it is just a question of what is possible and that depends on its age and model.

  • What happens when the status light keeps flashing quickly?

    My status light on the front keeps flashing quickly.  Is there a fix for this?

    If it's within the warranty period, then return and exchange it. If not, then you have to do a restore with a USB Mini cable.
    http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

  • Phone died and I put it on the charger and the red light keeps flashing.

    Phone died and I put it on the charger (wall charger) and the red light keeps flashing. It's been doing that for a little less than an hour, I pulled the batttery twice & get the same light flashing. I also read othe posts and it says to just let it charge for a few hours but i don't think it's gonna work. If you know anything about it let me know please & thank you.

    When connected to the charger, is the "no battery" symbol showing?
    Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage). If it doesn't reboot on the first attempt, leave it several more hours. I've had one charge for two days before it came back to life after an extreme battery depletion. Every 3-4 hours, with the device still connected to the charger, you can remove and replace the battery to see if it reboots.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I am connected to the internet, but the amber light keeps flashing. What is wrong?

    What is wrong with my Airport express when the amber light keeps flashing, even though I am connected to the internet?

    The AirPort Express has a message for you.
    To find out what it is......
    Open AirPort Utility, select the Express, click Manual Setup
    Click directly on the word Status (3rd line)
    A window will open with details about why the Express is complaining.

  • My MacBook Pro shut itself down and now it won't turn back on and the power light keeps flashing a green and amber but very dull. Help please!

    My MacBook Pro shut itself down and now it won't turn back on and the power light keeps flashing the amber light. I don't know what to do, and this has never happened before.

    Hello Toby135
    Reset the SMC or System Management Controller to resolve issues with the power on your MacBook Pro and power adapter.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Regards,
    -Norm G.

  • Actiontec GT701C DSL light keeps flashing please help

    I use to have the WIFI router from verizon but the wifi range was not strong enough for certain items in my home... in addition the items could not even find the network on wifi. i replaced it with a Actiontec GT701C so i could use my old wireless router that was strong enough to support my whole home .. But know when i connect my DSL line to the New modem the GT701c i can not access the internet .. i Could get to the configure screen but other than that the DSL Light keeps flashing any suggestions.. i have rebooted the modem and tryed diffrent phone line and phone jacks in my home please help !!!

    Does your older modem connect still? If so, could you tell us which modem it is so that we could help you obtain the Transceiver Statistics from it? It's possible the ActionTec could either be defective or it could be sensitive to noise on the line if the signal isn't the greatest.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Blackberry LED light keeps flashing red

    Yesterday Vodacom Care gave me a new Q5 device - i had a Q5 for 2 months and the phone just went dead - so they replaced  it . Now  my Q5 LED light keeps flashing red and it's a NEW PHONE ??? - make it stop please !

    Hello,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    Follow the steps below to try and bring the BlackBerry Q5 back to life:
    Ensure that BlackBerry Link is installed on the PC or Mac OS
    Ensure the computer has an internet connection.
    Launch the BlackBerry Link Software.
    Note: A backup of the BlackBerry device should be tried before a reload.
    Turn off the BlackBerry device. Make sure there are no flashing LEDs and that the LCD is not still being lit by the backlight. If there are any flashing LEDs, hold the power button for 15 seconds until the LEDs stop.
    Connect the BlackBerry device to the computer.
    When prompted with Cannot communicate with device, click Restore and then click yes allow the update to be downloaded and installed on the BlackBerry device.
    If the restore button is not seen press the vertical dots in the lower right corner of BlackBerry Link and select disconnected device.  Highlight the disconnected device you are working with and attempt steps 4 to 6 again.
    If the issue still persists, then I suggest contacting your network service provider for repair options. 
    Let me know if you have any more questions.
    Cheers.
    VIA | ViciousFerret
    http://supportforums.blackberry.com/t5/BlackBerry-Z10/BB-Z10-Died/m-p/2230087#M10125
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • HT1551 after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

    after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

    The update failed - using a USB to microUSB lead (that Apple annoyingly don't include!), try to restore the AppleTV software to current version software using instructions here:
    http://support.apple.com/kb/HT4367
    Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.

  • Light keeps flashing and cannot connect to ipad

    The front light keeps flashing and there is no connection to my ipad - advice seems to be to restore but do I restore on the ipad - general settings and restore

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source List
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • Notification light keeps flashing

    I've a Nokia N8 and recently the notification light keeps flashing even though i have no messages or missed calls. It only flashes when i lock it and it's not the same flash as a message notification it's more softer. Anyone know how i can stop it or have any ideas why it's flashing?

    In the notification settings turn standby breathing light off,this is just to let yet know your phone is on.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Amber Light keeps flashing - can't configure my AirPort Express

    Here is my setup: Dell XPS M1530 running Windows Vista. I have my cable modem directly plugged into my AirPort Express. I have no other wireless network or router.
    I'm able to connect to the AirPort Express through my wireless card and establish a connection and surf the net but the Airport Utility Software won't let me configure the device and the light keeps flashing amber. It never turns to green. I've tried every combination of resetting my AirPort Express, cable modem and computer.
    I can see the AirPort Express Base Station icon on the left hand side of the AirPort utility software , when I click "manual setup" or "continue" it try to detect a wireless device but it always comes back with a the message: "An error occurred while trying to access the Apple wireless device. Make sure your network connection is valid and try again. error -4"
    Am I missing something?

    Temporarily, disconnect the ethernet cable from the Express that is coming from the modem.
    Connect an ethernet cable from your computer to the AirPort Express, turn off wireless on the computer, and see if AirPort Utility can access the settings that way. If so, go ahead and set it up.
    If you are able to configure the device, then you will get an error message that you do not have an internet connection...because the Express is not connected to the modem.
    When you re-connect the ethernet cable from the modem to the Express and restart both the modem and Express, you should get the green light.
    Depending on the type of modem you have, some additional configuration may be needed. The important thing at this point is to get AirPort Utility to access the settings on the Express so that you can configure it.
    You may need to do the factory reset again on the Express. If AirPort Utility still cannot access the settings on the Express after this, try another computer, Mac if possible, to see if that might be the issue.
    Sometimes, an internal component fails within the Express. When this occurs, AirPort Utility cannot access the device no matter what, and there are really no other options except to replace the device.
    Please post back on your progress.

  • Airport Express status light is flashing yellow

    My Airport Express status light is flashing yellow. It has worked in the past, but not recently. I thought it might be a location problem so I moved it to within 6 ft of the computer and it is still happening. I tried the reset button and that didn't do anything. Any other ideas?

    "I tired the reset button"
    Have you done a factory reset?
    http://docs.info.apple.com/article.html?artnum=108044

  • Officejet pro 8000 and the power and resume lights keep flashing

    I have an officejet pro 8000 and the power and resume lights keep flashing. I initially had the problem when I put a new black ink cartridge in. Lately there was an error message on the computer saying pump stall error, which then culminated in a print head error. I have replaced the print head at an extra £40 I have replaced all the ink cartridges which say they are low even though I haven't been printing. Basically spent the cost of the printer again  AND I STILL CANT PRINT! I'm using a Mac with snow leopard and I have reset the printer list and installed the new software and drivers. I have tried connecting with USB and Ethernet. I have filled up the paper. I have taken out the duplex and given it all a blow through. reset the print heads - basically everything the support web pages told me to do.
    I have to say this is the worse printer I have ever had from HP. I always buy HP because of the quality. I have to say I feel unless this problem is solved with out me spending more money on it I will have to buy something else - and not HP ever! oh and the warranty is out by less than 2 months!

    Welcome back burtf,
    I am sorry to hear about the issue you are having with your Officejet 8500 showing a message for you to turn the printer off and on. I would recommend following the guide below for this issue.
    I hope it helps!
    'Turn Power Off then On' Message Displays on the Control Panel
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
    Happy Thursday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for

  • Sharing itunes with different user accounts

    I just got Windows Vista. I have the latest version of Itunes. I'm trying to set it up so that my wife and I can share songs with different user accounts in Windows. I followed all the instructions. I moved the iTunes music folder to a public folder.

  • Error while creating database using DBCA

    Hi, I installed Oracle10gR2 on my windows machine.Now am creating a database with dbca but just after i click the finish button it gives me the error - Cannot create directory "F:\oracle\cfgtoollogs\dbca\ora10g" where F:\oracle is the directory where

  • Error about the dll crdb_dao.dll - In Event Viewer - Application log

    We have classic ASP application and we are using Crystal XI for reports viewing and printing. We are keep getting the following error logged in the event view application log. Faulting application dllhost.exe, version 5.2.3790.3959, faulting module c

  • ABAP Trial installed, BI enabled  Business Content  missing components

    Hi experts, I've installed the ABAP Trial, and enabled the BI 7, but it seems that the Business Content is missing most of its components. Please Advice,

  • Moving photos and movies to free up space on hard drive

    My MacBook hard drive is almost full. The majority of the space is taken up by photos and movies. I would like to move my current collection of photos and movies to an external hardrive, and then delete the files off my harddrive so that I have the s