(three-way color corrector) secondary color correction masks not working?

Hi I'm using PP 2014 on Yosemite. Anyone notice (three-way color corrector) secondary color correction masks not working?

strange. same stats here but im getting intermittent.... sometimes i can use the mask and the effect is only limited to the masked area. most of the time the masked area is ignored and the effect is applied to the whole image

Similar Messages

Secondary colur correction mask not working! Help!

I am currently working on Premier Pro CS6 editing a music video. I have edited my footage, fixed the tonality and I am now onto color grading it. I took the saturation down to take out the colour and applied RGB curves to add blue into the shadows and then another fast colour corrector to give the video a blue/black depressed feel.
Going through my footage I wanted to take out certain colours that were too vibrant still. So I thought to make a mask. This is where my problem starts. I open up the three way colour corrector and the RGB curves and go down to secondary color correction and go to mask. When I try to take a sample from the dropper Premier doesn’t pick up the colour from where I want but selects it in other areas of the footage but never on the area I want! I have tried this on my mac book pro and the same is happening. When I have tried it on rushes it seems to work. I don’t understand why it doesn’t work when I have colour graded my footage?! I have tried many different discussions but nothing is pointing me forward. If anyone has any idea of why this is happening and how to solve my problem I would be so thankful!

Hi ACD,
After Effects and Photoshop CS6 take .Looks via the LUT engine. That indeed allows for using primaries with low mid high differentiation and should yield really good results.
Secondaries can be expressed in a LUT as well, but I would typically not recommend using them when you want to integrate .Looks with your After Effects workflow. Here's why:
- a LUT is never as precise as you'd want it to be for something as complex as secondary color grading - a LUT is always based on interpolation (as opposed to applying the effect in SpeedGrade - there it's all native, no interpolation at all)
- For a good key you would typically use the denoise and the blur function in the secondaries. Both (by nature) don't translate at all into a LUT, so you'd have to give up using these 2 important tools
- For a lot of work you'd want the LUT to be accompanied by a mask. That's something that also can't be described in a LUT.
Think of the LUT support for .Looks you created in SpeedGrade more as a really helpful tool for matching your comps to an overall look you design, not necessarily as the tool to apply a final grade.
Hope this is helpful.
Pat

Mask not working correctly?

Hi every one!
I have this problem with my mask not working properly, i have an image, and it has an red fruit sitting on a table,
i have to make the picture sepia using an adjustment layer ( my lecturer says it MUST be done that way)
but leaving the fruit as red as possible. So when i do this i MUST use the layer mask provided by the
adjustment layer, but what is happening is the orange is going a very faded red ( but not quite sepia), the table BG does go sepia..
so its KIND OF working but not really.
Cheers
Bunny Face

Check your mask by OPTION CLICKING on the mask icon on the specific layer. This will show you a greyscale mask. BLACK hides, WHITE REVEALS. SO obviously grey does half of each! So if you dont want the apple to be affected by the layer mask you must paint it BLACK in the mask of that adjustment layer.

I have adobe acrobat pro for windows and it is freezing up when I try to convert a word file to pdf... I have tried to get this done six ways from Sunday but it is just not working... help! Chris.

I have adobe acrobat pro for windows and it is freezing up when I try to convert a word file to pdf... I have tried to get this done six ways from Sunday but it is just not working... help! Chris.

It would be helpful to know what version of Acrobat, WORD, and operating system.
Without that info, I would suggest at this point to open your WORD file and then go to the print menu and print to file using the Adobe PDF printer. Open the created file in Distiller and see if you get a PDF. If so, check to see if AcroTray is running in the background.
You say you tried many ways. It would help to know what you tried and what worked or did not work, and at what point the failure occurs.

I got my Imac and Trackpad in may so its new and the batterys have run out on the trackpad, so i have put new batterys in and its not even turning back on i have tried the batterys the other way round ( i used duracell) and still not working, HELP

I got my Imac and Trackpad in may so its new and the batterys have run out on the trackpad, so i have put new batterys in and its not even turning back on i have tried the batterys the other way round ( i used duracell) and still not working, so i put the old batterys in and it still wont turn on. I am getting so angry woth apple things, the make it sound better than it is and over pice it, i paid over a grand for my imac and it dont even come with a cd SLOT. Please can some one help!

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

Lens Correction filter not working?

I upgraded to CS5 specifically to use the auto lens correction feature (primarily for barrel and pincushion distortion on my Canon zoom lenses). Now I find that:
Even though the camera back (5D Mark II) and lens information is included with an image, the lens correction filter requires me to manually select the back and lens.
Several of my lenses are not even included in the data base, even though they're very popular lenses (e.g., EF16-35mm 2.8 L USM II and EF 70-300mm DO IS USM). I realize the data base is to be enlarged, but these seem like inexplicable omissions. (And I have no desire or time to create my own profiles.)
The PDF instruction manual for CS5 offers no help, and I don't see this issue addressed in the forums. I'm hoping someone will be able to advise me on how to make this function work.

Jeff,
   Thanks for the quick answer, but I still think the menu is misleading.
   If the body choices were in the format of "full frame, 1.3 crop, 1.6
crop, etc.", it would be clear that the specific model didn't matter.
However, this would create its own problems since many people wouldn't
understand the concept of the crop factor for their camera.
   The fact that the 5D Mark II exists in the pull-down menu as a discrete
choice in addition to the 1Ds Mark III implies that there is a difference
between the two. Even if there is no functional difference in this context,
it would avoid confusion if the actual body from the EXIF information could
always be the default selection.
   Thanks.
From: Jeff Schewe <[email protected]>
Reply-To: <[email protected]>
Date: Sun, 16 May 2010 23:57:46 -0600
To: Mike Curl <[email protected]>
Subject: Lens Correction filter not working?

Three-way color corrector (secondary grading) [CS6]

is it just me, or are the output options gone?
they are present in AE, but in premiere it doesnt give me the abilitly to see the mask.... were some things changed?

Have you tried clicking the Show Mask checkbox right under the Secondary Color Correction header?
(And yes, controls were reorganized.)

Secondary Color Correction layer not working in .look file

I needed to edit an image for continuity reasons so I exported a .dpx frame from that section of my premiere pro project and worked on it in speedgrade. In the workflow I have set for myself, it is best to apply the look in after effects using the "apply color lut" function. Unfortunately, the secondary color correction layer does not apply, but other layers such as primary will.

Hi ACD,
After Effects and Photoshop CS6 take .Looks via the LUT engine. That indeed allows for using primaries with low mid high differentiation and should yield really good results.
Secondaries can be expressed in a LUT as well, but I would typically not recommend using them when you want to integrate .Looks with your After Effects workflow. Here's why:
- a LUT is never as precise as you'd want it to be for something as complex as secondary color grading - a LUT is always based on interpolation (as opposed to applying the effect in SpeedGrade - there it's all native, no interpolation at all)
- For a good key you would typically use the denoise and the blur function in the secondaries. Both (by nature) don't translate at all into a LUT, so you'd have to give up using these 2 important tools
- For a lot of work you'd want the LUT to be accompanied by a mask. That's something that also can't be described in a LUT.
Think of the LUT support for .Looks you created in SpeedGrade more as a really helpful tool for matching your comps to an overall look you design, not necessarily as the tool to apply a final grade.
Hope this is helpful.
Pat

Color Corrector's Frame Viewer Split Not Showing Up On External Monitor

Kind've a long title - sorry - but . . . here's my question:
Why am I not able to see the Frame Viewer's split on my external monitor?
A further, more detailed explanation of the problem:
I recently purchased Ripple Training's Color Correction with Andrew Balis. It's very, very imformative and I think will help a lot when it comes time to begin color correcting the feature I'm working on. The section I'm on shows the Frame Viewer tab in the Tool Bench window that presents itself when one opens Color Correction under the Arrange area. In other words, Arrange>Color Correction sets up your windows for color correcting with your Viewer, Canvas, and Tool Bench windows aligned from left to right. When one opens up the 3 Way Color Corrector on a clip and makes a change in the clip, the Frame Viewer tab in the Tool Bench window will show a split screen where on one side you'll have your clip with the color correction you just did, and the other side un-color corrected. Isn't this (split) image supposed to show up in your external monitor just as the images in the Canvas and the Viewer?
That doesn't seem to be happening on my external monitor.
I'm not sure if this problem/issue I'm having is related to the muticlipl issue I posted in an earlier thread http://discussions.apple.com/thread.jspa?threadID=1330596&tstart=0
perhaps.
Any help on this issue would be greatly appreciated.
Thanks in advance,
Javier Calderon

Ahhh, Shane. So it's as simple as that? So then there's nothing wrong with my setup or my external monitor? FCP's just not designed to show the Tool Bench's Frame Viewer image in your external monitor? Wow . . . Well that answers that then I guess. And you're right . . . that IS indeed kind've lame . . .
Thanks.
Javier
. . . um . . . doesn't that kind've defeat the purpose of proper color correction then (regarding the Tool Bench's Frame Viewer anyway)? If the only place you can see your color corrected Frame Viewer split images is on a monitor that's NOT suited for color correction? Anyway . . . just a thought . . .

CS6 Using RGB Color Corrector effect, Reference Monitor will not update?

When the current tine indicator is on a clip using RGB Color Corrector effect, the Reference window will not update.
And not only doesn't it update the data on the graph, but if you change the type of scope (Display Mode) (e.g. from RGB Parade to Vectorscope), that also doesn't change until you move the CTI to view a clip without the RGB Color Corrector effect on.
Anybody can help me to fix this problem, it is very important to me, many thanks!!!

Take a look here: http://help.adobe.com/en_US/premierepro/cs/using/WSCB566F37-A8BA-4b43-8BD2-B6467AAE930E.ht ml
Here the appropriate quotation from the help:
Gang the Reference Monitor and Program Monitor
You can gang the Reference Monitor and the Program Monitor so that both always monitor the same frame.
Do one of the following:
In the Reference Monitor, click the Gang To Program Monitor button .
In the Reference Monitor’s panel menu, choose Gang To Program Monitor.
In the Program Monitor’s panel menu, choose Gang To Reference Monitor.
Both Monitors show the same frame. Moving the playhead in either the Reference Monitor, the Program Monitor, or the Timeline will move the playheads in the other two to the same frame.
Regards
Axel

Mask not working correctly in swf

Hai Friends,
I am trying to do a simple masking which works correctly in
fla but when viewed in swf the text which is masked is not
seen..What i did is first i wrote some text converted it to
movieclip then in another layer i did draw a rectangle with some
color and right clicked the rectangle and masked it When viewed in
fla the masked text is viewable but when converted to swf the text
is not seen Is it some problem with Flash Can you please help me...

Text is not able to be masked in Flash by default.
You CAN do this IF you embed your text (or simply break it
apart into vectors if it doesn't need to be dynamic).
To break apart - select your text and hit Ctrl+B twice (Cmd+B
on Mac). This will make the text vectors, thus negating the
problem.
Otherwise, you need to embed the fonts in 2 ways. First, if
you like, you can click the "Embed fonts" button in the properties
panel, and select what to embed. OR, you can go to the Library's
drop-menu and select "New Font" - choose your font, and click OK.
Either of these methods embeds your font. BUT, there is one more
step. You need to give your text box an instanceName, go to the
actions panel, and enter the following:
myTextBox.embedFonts = true;
This will finish the embed process to allow the masking (and
alpha changes) to work for the text.

Smart collection has "source color profile" as filter option, does not work on camera profiles

In Lightroom 5 i tried to use the "source color profile" filter option in smart collection, however it only seems to work on rgb files (jpg, tiff) that have a profile embedded. It does not work on values like "Adobe Standard" which is a "source" profile of a RAW file, or any of the camera profiles i can choose fo given Raw file. What am i doing wrong?
The Help does not give any clue on this, nor does the coverage by any of the Lightroom guru's like Juleanne Kost.

In my opinion the filter is acting correctly.
The Adobe Standard profile is not a profile defined in the source file, it is a profile assigned to the file in the raw converter and used with raw files that do not have a source color profile, already, so to me the filter is acting correctly because “source” means where the profile comes from, rather than what profile a master photo has had assigned to it.
The source-color-profile option is useful to determine the size of the color gamut in a file’s color numbers which indicates its suitability for various purposes: An sRGB file can be safely uploaded to the web, an AdobeRGB file is going to look right on a wide-gamut monitor and printablebut shouldn’t be uploaded to the web, while a ProPhotoRGB file has a large color space and can be safely edited in a way that adjusts the colors significantly, especially if it is 16-bit, without color-banding or posterization, but a ProPhotoRGB file will probably not look good if directly uploaded to the web or sent to a print-shop that doesn’t do their own color profile conversions.
I would agree that being able to filter raw files based on the assigned color profile would also be useful, but this is a different thing, to me at least, than filtering by the source-color-profile.

Color management in Save for Web not working

The Save for Web dialog box in the CS6 Beta is ignoring color profiles, so color is not managed. This has not been a problem in previous versions.

The saved output is just fine. I was referring to the images in the Save for Web dialogue
I just checked my settings. CS6 apparently changed my Preview setting from "Use Document Profile" to "Monitor Color." It also changed my Metadata setting. It should not do that!
Restoring the correct Preview setting solved the color management problem, but ONLY for the Preview image. The Original image is still not color managed.
I'm on a wide-gamut monitor, so sRGB images come out looking garish if there's no color profile embedded or it's ignored. That's what's happening here with the Original image in Save for Web. I imported an sRGB image with profile embedded, and it looks just fine in Photoshop while editing. Then I went to Save for Web, with the settings Embed Color Profile, Convert to sRGB, and Preview: Use Document Profile. The JPEG preview too looks just fine with these settings, but the Original looks garish, showing a lack of color management. The color in the two views is showing as completely different, though they both represent the same image with the same color profile embedded.
Going back to CS5, the same image is properly color managed in both Original and Preview. Both images show identical color, as they should.

IPOD Color- Corrupted- restored- black/white menu+not working (WinXP)

I got an iPOD Color Display last year, few days ago, it started going nuts. Windows were not recognizing etc.
After the restart-reboot-restore it has a Black/White GUI and still windows can not recognize it. Windows say that it is a generic USB hard drivem iTunes say that it needs to be restored (and after every restoration, it needs to be restored again, and it is not working anymore, even if it is alive).
iPOD's screen shows the exclamation mark over an envelope.
HELP!!!
Is there any advance utility, which for example, could make iPOD an image of a filesystem, in order to everything be overwritten (factory settings)

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

PS CS6: stroke color picker preview in real time not working

re: NEW color picker stroke color not updating in real time (previewing).
Is it me or has the stroke color preview been removed in CS6 or is there a setting that needs to be changed to enable it?
The problem: When I create a shape layer, press enter and then chose a stroke color from the color picker, I select a color but it doesnt update the stroke color until I press enter. I'm sure it used to change in real time as you clicked on the color picker panel before accepting it.
Any sugestions or ideas as to whats going on or am I going mad?
Further update: This is when creating a shape but using the new stroke feature in the properties bar at the top (the one which gives you the new fancy options like having a dashed, transparent or gradiented stroke) and not the traditional method of adding it as an effect. This still shows a real time update, but the new method doesnt.

Curt Y wrote:
zarrdave wrote:
You're then moving the colour picker dialogue box to one side so you can see he shape created, and you've then tried clicking on different colours and the border color has changed after each click (but before you press OK)?
If thats working so the color changes in real time for you, then unfortunatley I've got a problem with my version.
Using Win7 CS6 extended, and following your instructions it works for me.
Border changes withn I click on color pallet with color picker.
Odd, same version/ O.S. here, thanks for that though Curt Y. Are you sure you're not clicking on the preset colours and actually using the color picker dialogue box.
I've been in a bit of a rush here at the office and appologise for not being clearer and posting a screencap earlier.
To clarify, its the Cyan dialogue box not the orange box I'm talking about (nice choice of colours I know ). The top right icon in the organge box with the colours in is how you get to it.

(three-way color corrector) secondary color correction masks not working?

Similar Messages

Maybe you are looking for