Threshold limit value for the mic?
Hello community,
I have a nice setting for my microphone on adobe audition 6. But I have one big problem.
How can I setup a threshold limit value for the microphone voice? The issue is, that I have all my ambient noises on the recording, so I need a "minimum" activation line. (the same as the "speech activation" in teamspeak 3). There must be a limit and noises under this limit have to be ignored/not recorded.
I hope you know what I mean.
Thanks in advance for any help and best greetings from Germany.
Merciless
Hallo Merciless
because you mentioned "greetings from Germany" I'll now switch language, hope you understand German too.
Was Du suchst ist ein Noise Gate.
Das findest Du wenn Du im Effekte-Rack "Amplitude und Komprimierung > Dynamikverarbeitung" auswählst.
Am oberen Rand dieses Fensters findest Du dann ein Drop-Downmenü "Vorgaben" und hierunter zwei "Noise Gate" Einstellungen.
Jetzt vielleicht noch ein bisschen mit den Einstellern spielen und das Grundrauschen sollte weg sein.
Ich hoffe die Info hilft weiter
Viel Erfolg
Similar Messages
-
What are the default values for the NetStream.multicast***** properties
I read the api document about NetStream.multicast**** properties, but found no default values were given. Will the default values be changed when FP10.1 release?? Or, the values are always changing at runtime?
I have a web-tv application, it broadcast some live videos created by my friends, I think that the latency and lag-time can be bigger in my app, I want to know the recommended default values for the multicast*** properties.
I think the multicastWindowDuration and liveDelay are the keys. And I am confused between NetStreammulticastWindowDuration and NetStream.bufferTime..they like the same...
Sorry for my poor english, Thanks.the publisher can set the multicast properties you listed to be the defaults for all of the subscribers of the stream. in addition, the publisher can select whether or not "push" mode is used by changing NetStream.multicastPushNeighborLimit. setting the limit to 0 disables push, setting it to non-zero enables push in the mesh, but only changes the actual push neighbor limit for the publisher. if push is enabled for the stream, each peer will use push mode, but will start out with the global default limit (which is currently 4). this is for safety. we recommend you always leave push enabled.
each peer (including the publisher) can change the multicast stream parameters dynamically. changes are local to that peer.
for the publisher to set the initial parameters for the stream that all peers will inherit as the default, the parameters must be changed on a new NetStream *before* NetStream.publish() is called. example:
var ns:NetStream = new NetStream(netConnection, groupSpecification);
ns.multicastWindowDuration = 10; // change default for everybody
ns.publish("mystream");
ns.multicastWindowDuration = 15; // change window duration just for publisher, everybody else will start with 10 for this stream
each subscriber can override the multicast stream properties locally, but the overrides must be set on the NetStream *after* receiving a NetStream.MulticastStream.Reset NetStatusEvent.NET_STATUS event in order for the override to stick. overrides must be reapplied each time the NetStream.MulticastStream.Reset event is received. -
BAPI_PO_CHANGE does not change LIMIT value for service PO with ref to IDOC
Hi,
I am trying to change the limit values for both ACCTASSCAT (K) and item cat (D ie service PO) with ref to message type PORDCH IDOC type PORDCH02, the IDoc is getting posted but the PO is not getting updated ie LIMIT value is not getting change and returning msg "No data changed".
Could you please provide the way to change LIMIT value.
Regards,
Mojammil KhanAre you really sure that your IT_SCH has the same fields like POITEM?
the delivery date and statistical delivery date are located in the schedule tab in ME23N and stored in the schedule table EKET, not in EKPO where the PO item data is stored.
I think you should assign your IT_SCH to POSCHEDULE -
Best way to configure redelivery limit value for a Queue
Hello,
My doubt is related to configuring the JMS Redelivery Limit property from Weblogic 9.2 Server.
We must support redelivery attempts in our queue, with a redelivery delay of 30s. So, we have set the queue's Redelivery Limit property to -1, via Console Configuration:
Settings for My_DQueue -> Delivery Failure -> Redelivery Limit = -1
The consumer of that queue is a MDBBean, which extends org.springframework.ejb.support.AbstractJmsMessageDrivenBean.
The producers to that queue are weblogic.jms.extensions.WLMessageProducer.
That queue has an error queue configured as Error Destination.
Then, the WLMessageProducer is the one who specifies that value:
WLMessageProducer messageProducer = (WLMessageProducer)queueSession.createProducer(queue);
messageProducer.setRedeliveryLimit(5);However, we will not be able to ensure that all message producers pointing that queue will specifiy that redelivery limit. This may lead us to problems, as default queue Redelivery Limit is set to -1, and messages without specified redelivery limit would be redelivered indefinitely.
I'd like to know if there is any way to specify a MAXIMUM redelivery limit value for a JMS queue. For example: fixing that limit to 10. If producers specify by themselves a redelivery limit lower than such value, that limit is applied to messages. Otherwise, the configured default limit value is used.
Another option we have considered is to include, in the MDB's onMessage() method, a validation of the "JMS_BEA_RedeliveryLimit" message property:
This validation would check whether no redelivery limit is configured in the Producer, and would forward such messages directly to the error queue, from the MDB, when the "JMSXDeliveryCount" outnumbers our fixed value:
public void onMessage(Message message) {
try {
if(message.getIntProperty("JMS_BEA_RedeliveryLimit")<0){
//MESSAGE FOUND WITHOUT REDELIVERY LIMIT SPECIFIED BY PRODUCER.
//POTENTIAL DANGER OF BEING REDELIVERED INDEFINETELY
int deliveryCount = message.getIntProperty("JMSXDeliveryCount");
if(deliveryCount>10){
//CAN I FORWARD MESSAGE TO ERROR DESTINATION?But we were not able to found such examples to achieve this
Thanks in advance!
Joan EsteveHi Joan,
I just double-checked, and as far as I can tell the options for setting a redelivery limit include programmatically on the Producer or by configuring an override on the Destination. Unfortunately, you need the override to only take effect if the delivery limit hasn't already been set. (If we had a default deliverylimit configurable on our connection factory, this would have done the trick.)
I think you've already hit upon the solution: your consumers can check each received message's JMSXDeliveryCount and act accordingly. It's fine for a consumer to use the JMS_BEA_RedeliveryLimit property see if the Limit has been set by a producer, and then check JMSXDeliveryCount to check the delivery count, but I'm not sure if the JMS_BEA_RedeliveryLimit property is set in older versions (8.1 may not have it for example).
As a refinement, you may want to use the WLMessageProducer forward() API. This is an alternative to send() that preserves the message-id and timestamp of a consumed message. I don't think forward() allows any modification of the consumed message before it's forwarded.
Hope this helps,
Tom
Edited by: Tom B on Feb 22, 2013 10:03 AM -
How can I get null values for the later weeks
Hi All,
When I execute this code I get the records till current week.
How can I display the output so that I get null values for the later weeks. (with the help of v_numOfWeeks variable in the code)
Thanks,
Vikram
DECLARE
v_query VARCHAR2(4000);
TYPE ref_cursor IS REF CURSOR;
v_refcur ref_cursor;
v_sum NUMBER;
v_id NUMBER;
v_name VARCHAR2(1000);
v_weeknum NUMBER;
v_pernum NUMBER;
v_numOfWeeks NUMBER := 5;
BEGIN
v_query := ' SELECT SUM(product_bkg), postn_id, postn_tbl.postn_name, b.week_num, b.period_num
FROM ops_cv_extract b, (SELECT row_id, desc_text postn_name
FROM s_postn) postn_tbl
WHERE lvl_6_id = 5767
AND fiscal_year = 2008
AND b.week_num < 4
AND b.period_num = 3
AND b.postn_id = TO_NUMBER(postn_tbl.row_id)
GROUP BY postn_id, postn_tbl.postn_name, b.week_num, b.period_num
ORDER BY postn_tbl.postn_name, b.week_num';
OPEN v_refcur FOR v_query;
LOOP
FETCH v_refcur INTO v_sum, v_id, v_name, v_weeknum, v_pernum;
EXIT WHEN v_refcur%notfound;
dbms_output.put_line('P'|| v_pernum||'W'|| v_weeknum||' '||v_name||' '||v_sum);
END LOOP;
END;
This is the output when I execute this code.
P3W1 COMM CNTRL ISAM 213 26961.61
P3W2 COMM CNTRL ISAM 213 12870.4
P3W3 COMM CNTRL ISAM 213 245.88
P3W1 COMM CNTRL ISAM 273 72831.2
P3W2 COMM CNTRL ISAM 273 8739.38
P3W3 COMM CNTRL ISAM 273 3764.92
P3W1 COMM CNTRL TAM 213 49844
P3W2 COMM CNTRL TAM 213 20515.17
P3W3 COMM CNTRL TAM 213 16167.46
P3W2 COMM CNTRL TAM 216 12561.4
P3W3 COMM CNTRL TAM 216 2027.1
P3W1 COMM CNTRL TAM 273 -3336.71
P3W2 COMM CNTRL TAM 273 -1376.68
P3W3 COMM CNTRL TAM 273 19707.42
P3W1 Damon Walters -609.07
P3W2 Damon Walters 30030.24
P3W3 Damon Walters 37475.1
This is the output I'd like to get
P3W1 COMM CNTRL ISAM 213 26961.61
P3W2 COMM CNTRL ISAM 213 12870.4
P3W3 COMM CNTRL ISAM 213 245.88
P3W4 COMM CNTRL ISAM 213
P3W5 COMM CNTRL ISAM 213
P3W1 COMM CNTRL ISAM 273 72831.2
P3W2 COMM CNTRL ISAM 273 8739.38
P3W3 COMM CNTRL ISAM 273 3764.92
P3W4 COMM CNTRL ISAM 273
P3W5 COMM CNTRL ISAM 273
P3W1 COMM CNTRL TAM 213 49844
P3W2 COMM CNTRL TAM 213 20515.17
P3W3 COMM CNTRL TAM 213 16167.46
P3W4 COMM CNTRL TAM 213
P3W5 COMM CNTRL TAM 213
P3W1 COMM CNTRL TAM 273 -3336.71
P3W2 COMM CNTRL TAM 273 -1376.68
P3W3 COMM CNTRL TAM 273 19707.42
P3W4 COMM CNTRL TAM 273
P3W5 COMM CNTRL TAM 273
P3W1 Damon Walters -609.07
P3W2 Damon Walters 30030.24
P3W3 Damon Walters 37475.1
P3W4 Damon Walters
P3W5 Damon Walters Edited by: polasa on Oct 28, 2008 6:42 PMSure, in a Single SQL ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:00.01
satyaki>
satyaki>
satyaki>-- Start Of Test Data --
satyaki>with week_tab
2 as
3 (
4 select 1 period_num, 1 week_num, 10 bkg1 from dual
5 union all
6 select 1, 2, 40 from dual
7 union all
8 select 1, 3, 30 from dual
9 union all
10 select 1, 2, 20 from dual
11 union all
12 select 1, 1, 10 from dual
13 union all
14 select 1, 1, 20 from dual
15 union all
16 select 1, 3, 10 from dual
17 union all
18 select 2, 1, 15 from dual
19 union all
20 select 2, 2, 20 from dual
21 union all
22 select 2, 3, 10 from dual
23 union all
24 select 2, 1, 15 from dual
25 union all
26 select 2, 2, 30 from dual
27 union all
28 select 2, 3, 20 from dual
29 )
30 -- End Of Test Data --
31 select period_num,
32 week_num,
33 (
34 select sum(week_tab.bkg1)
35 from week_tab
36 where period_num = m.period_num
37 and week_num = m.week_num
38 group by week_num, period_num
39 ) sum_bkg1
40 from (
41 select dum.week_num,
42 wk.period_num
43 from (
44 select 1 week_num from dual
45 union all
46 select 2 from dual
47 union all
48 select 3 from dual
49 union all
50 select 4 from dual
51 union all
52 select 5 from dual
53 ) dum ,
54 (
55 select distinct period_num
56 from week_tab
57 ) wk
58 ) m;
PERIOD_NUM WEEK_NUM SUM_BKG1
1 1 40
1 2 60
1 3 40
1 4
1 5
2 1 30
2 2 50
2 3 30
2 4
2 5
10 rows selected.
Elapsed: 00:00:00.48
satyaki>Regards.
Satyaki De. -
How to get the values for the Authorization Object Fields....
Hi Everyone,
I'm pretty new to the SAP Security and have been working on the Basis sides...I created a new role in PFCG and added a few transactions (ME13) and clicked on the Authorizations tab. In there, the authorization tree is in yellow and red. After providing the Org Values, only the yellow lights remain (apart from the green one ofcourse). Now how do we get the values for the different auth obj fields that are in yellow... say for example
Conditions COND
Maintain Condition: Auth. for Use/Appl./Cond.Type/Table V_KOND_VEA
Activity 03 ACTVT
Application KAPPL
Condition table KOTABNR
Condition Type KSCHL
Usage of the condition table KVEWE
Here the values for V_KOND_VEA fields e.g. KAPPL, KOTABNR etc are missing.
My question is how do we get these values in regard to the requirement provided by the client...is it the functional guys who provide these values or else how is a security person supposed to know it...
All the help in this regard is sincerely appreciated along with the awarding of points...Hey thanks Alex and Catastrophe for the quick response...
I'll be sitting with the functional team and reviewing the roles created.
Thanks for all the help once more
Regards,
Akash. -
We are having a custom WebADI, containing a field (Employee Name) which is a LOV.
The LOV has ID : Person ID, Meaning : Employee name, Description : Position Name.
There are multiple records with same Employee name but different Person ID.
If I select an Employee in the LOV which has multiple records (through different IDs), I am getting an error in WebADI:
"Enter a valid EMPLOYEE_NAME.
XX is invalid. Enter a valid value for the Mapping column EMPLOYEE_NAME"
The Query for the LOV is correct and is returning correct records.
Any pointers on this issue highly appreciated.Hi,
The problem could be with HR security profile attached to the responsibility from where you are launching the spreadsheet. Check it once.
Thanks. -
Adjusting Portal Pages throws "Specify a value for the property {0}"
I found (with the help of our friends at OSS) the setting I need to change with to adjust the Runtime frame size for Guided Procedures.
It's quite logical really, since GP is just a bunch of pages in the portal it would make sense to find them in the Portal Content option ... So there it was.
Content Administration > Portal Content
Search for content and go to Process Instance. The following part shows the 3 main content parts of the GP Runtime window. As you can see in the third container are the two elements that contain your content. "Content Area" and "Public Content Area".
Open those two areas (scroll down in the list in the middle, select one and press open) and change the value of Height Type from "Fixed" to "Automatic" or "Full Page".
This is where I get my error (see the link below for a screenshot as well): When I try to change a value, any value or just open for modifying and try saving again (without changing anything) I get this error:
[http://wow.telenet.be/delaware/property0.jpg]
Specify a value for the property
Now I don't know if there any portal expert watching this thread, but it seems as though all those pages have been wrongly configured from the start. And until I figure out the right configuration I won't be able to save them either way.
My question is two-fold:
1) Can anyone provide me with all the settings he has for this component so I can compare them to mine?
2) How do I fix this error? I'm assuming every page in the portal gives the same error?
Thanks in advance,
Frederik-Jan
Edited by: Frederik-Jan Roose on Apr 1, 2008 11:33 AM
Edited by: Frederik-Jan Roose on Apr 1, 2008 11:33 AMI found (with the help of our friends at OSS) the setting I need to change with to adjust the Runtime frame size for Guided Procedures.
It's quite logical really, since GP is just a bunch of pages in the portal it would make sense to find them in the Portal Content option ... So there it was.
Content Administration > Portal Content
Search for content and go to Process Instance. The following part shows the 3 main content parts of the GP Runtime window. As you can see in the third container are the two elements that contain your content. "Content Area" and "Public Content Area".
Open those two areas (scroll down in the list in the middle, select one and press open) and change the value of Height Type from "Fixed" to "Automatic" or "Full Page".
This is where I get my error (see the link below for a screenshot as well): When I try to change a value, any value or just open for modifying and try saving again (without changing anything) I get this error:
[http://wow.telenet.be/delaware/property0.jpg]
Specify a value for the property
Now I don't know if there any portal expert watching this thread, but it seems as though all those pages have been wrongly configured from the start. And until I figure out the right configuration I won't be able to save them either way.
My question is two-fold:
1) Can anyone provide me with all the settings he has for this component so I can compare them to mine?
2) How do I fix this error? I'm assuming every page in the portal gives the same error?
Thanks in advance,
Frederik-Jan
Edited by: Frederik-Jan Roose on Apr 1, 2008 11:33 AM
Edited by: Frederik-Jan Roose on Apr 1, 2008 11:33 AM -
How do I get a new value for the service name field and update it in Connection Properties?
I am running Windows Vista. I just upgraded to Firefox 4. When I try to log on to the internet, it tells me the proxy server is refusing connections. A diagnostic reported Error 815 and said the remote server is not responding because there is an invalid value for the "Service Name" field. It said to get a new value and update it in Connection Properties. How do I do this?
When you create a new film script, the first page you see is a title page.
The page after this title page is the one where you generally type in your scenes.
It looks like you are facing some issue and not able to delete any text.
Can you please send me this script so that I can have a better look at your issue?
You can save this script to disk by using option 'File -> Save to disk'. This will create a '.stdoc' file on your system.
Just mail this '.stdoc' file to me at 'roverma <at> adobe <dot> com'
Thanks -
11g-[nQSError: 42029] Subquery contains too many values for the IN predicat
Hi,
I am having 2 reports one is for subquery which returns inputs to Main report. Actually the report was working fine in 10g. But in 11g we are gettting following error:
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 42029] Subquery contains too many values for the IN predicate.Please have your System Administrator look at the log for more details on this error. (HY000)
Please have your System Administrator look at the log for more details on this error.
Getting same error after modofying the parameter value MAX_EXPANDED_SUBQUERY_PREDICATES to 12000
Please suggest what could be the other reason it may fail or any other settings we need to check.
Regards,
ckengckeng,
Normally the IN clause has restriction of 10000 values in general sql/plsql we will go with inline queries i think model your rpd to generate inner queries
select * from emp where dept_id in (Select distinct dept_id from dept);
or have a condition/filter on sub report and make one more inner report with sub-filter but definitely it will cause performance issues.
thanks,
Saichand.v -
Creation of a Query to show the values for the current month and the last 12 months data.
Dear All,
Good day!
I have to create a Query with the below requirement.
I have to create a Query to show the values for the current month and the last 12 months data.
Can you please guide me how to achieve this ??
thank you,
Regards,
HemaHema
explain the exact problem..? as you mentioned you want to create query to show values for current month and last 12 months.. so I think you want to show values for 12 months from current data.. you can achive this by multiple way..
you can have selection screen and field with date .. and restrict based on system current date and 12 months before or you can handle this at your target.. .. I mean there are multiple ways to restrict data by date range..
for some more hints..
http://www.forumtopics.com/busobj/viewtopic.php?t=34393&sid=7fba465d0463bf7ff5ec46c128754ed6
http://businessintelligence.ittoolbox.com/groups/technical-functional/cognos8-l/how-to-display-last-12-months-in-report-based-on-todays-date-3231850
http://scn.sap.com/thread/3217381
search on SDN you will get many other ways..
Thanks,
Bhupesh -
What are the possible values for the JOB status?
What are the possible values for the JOB status in the table TBTCP and significance for each?
Hi,
Have a look at include LBTCHDEF.
The standard include from SAP.
-> Definitions and Constants for Function group BTCH
Kind Regards
Raymond -
I want better solution for adjusting the Material stock values for the last
my Customer need to adjust( Decrease) the closing stock values for the following materials / plant wise as on 31.03.2006 for meeting statuary compliance.
Material1 : RS: 4149599 QTY : 10181.03 Ltrs
Material 2 : RS: 1318596 QTY: 2152.76 Ltrs
As per my knowledge MM posting periods can open current month and Previous month only. For the reason I proposed the solution as follows:
Step 1 : post FI Journal Entry on 31.03.2006
Opening Balance G/L Account Dr 4149599 + 1318596
Closting Stock a/c Cr 4149599 + 1318596
Step 2.
Change the Material Price in MM through T.Code: MR21
( Posting will be allowed in current or previous months)
This makes our CO reports accurate.
Please suggest the better solution if it is possible in MM for adjusting the Material stock values for the last financial year.
WIth Best Regards,
Rajesh
<b></b>Hi Madhavan,
Unfortunately this forum deals with migrations from non-Oracle
environments to Oracle. You seem to be dealing with migrations in
an Oracle environment mainly.
I would recommend that you contact Oracle Applications and RDBMS
support directly. They will have the most up to date
information/advice on performing these actions.
Regards
John
Madhavan (guest) wrote:
: Hi John
: Thanks for your reply.
: Actually I am planning to upgrade the system.
: 1. I Want to Upgrade Oracle Financials release 10.7 to the
: latest version (11.x)
: 2. Oracle 7 database to oracle 8 or 8i.
: 3. Oracle is running on NT service pack 3. Do I need to upgrade
: this?. If not what is the impact on Windows NT?
: 4. Is the majority still running smart client 10.7 and database
: 7?
: 5. What is the necessary time to implement these upgrades? What
: type of consulting I need to have?
: 6. I have some employees working on it? Will these changes
: affect them?
: What type of precautions I need to take on the whole??
: Thank You
: Madhavan
Oracle Technology Network
http://technet.oracle.com
null -
How to get the value for the LIT_Withheld field in the city tax form?
I am trying to get the value for the LIT_Withheld field on the city tax form , PAYUSEET.. This is not a database column but is generated based on some conditions.. Appreciate the help. Thanks, Suguna
Hi Abhmanyu,
Thanks for your response.
Search Help Name : ZZ_MG_MARITAL_VH
Selection Method : T502T
Search help parameters are SPRSL, FAMST, FTEXT,
Can u provide me a sample code to fetch the value of corresponding text.
Thanks,
Hari -
Default values for the controlling area and language
Hello
I have a query.
I need to set default values for the controlling area and language in the screen
"find account assignment data 1"
Is it possible to do so?
Thanks.
Jayawant GokhaleHello
To clarify,
This is the search used ,when I go for shopping.For the Cost assignment,the fields controlling area and language should be default for a user.
Could someone throw a light on this.
Thanks.
Maybe you are looking for
-
Dell Venue 11 Pro (5130 64Bit) BIOS update in WinPE 5.1 x64
I have encountered an issue while trying to upgrade BIOS on Dell Venue 11 Pro (5130 64Bit) in WinPE 5.1 (64-bit). To pre-empt any questions why not use BIOS update option available from boot menu: while it may be quite elegant solution for home use,
-
After installing iTunes under VISTA I noticed that both of my DVD/CD drives were missing. Device manager shows a conflict or blockage causing the drivers not to start. I tried iTunes 7.3.1 on another PC with VISTA and it did the same thing. I had to
-
I drawn some rectangles.If one rectangle was clicked,the rectangles below it should move down..but for me,its not repainting.the old location as well as the new location was there when i click the rectangle... import javax.swing.JApplet; * To change
-
XmlSaveDom unresolved symbol, and special characters in output...
I have a couple of issues with XmlSaveDom() that I'm hoping someone can help with... Firstly, under windows I'm having difficulty locating the library that it lives in. I'm linking to: oraxml10.lib (from the 10.1.0.2 XDK, the latest version I can fin
-
Why is the verification email containing my password I forgot empty?
I forgot my password to an Apple ID (not the same Apple ID as this one). I went to the Apple website where I sent an email to the email-address which I used to create the Apple ID. I received the email and opened it, and it was empty. My email accoun