Threshold Value in Sales Order Processing

Dear All,
I have a question for which I need inputs and suggestions from you.
We have a requirement in the returns processing to do check on the value of goods being returned and if this value goes beyond a certain threshold (pre-agreed value with the customer) then the system will raise a message and should not allow further processing of returned goods.
This is the approach that we think of following:
1) we store the initial Threshold amount as a header condition in the Return Authorization (RA) document.
2) when creating Return Orders (RO) with reference to RA we check the value of all the open RO's against the RA
3) We make reference to RA as mandatory at the time of RO creation
3) if total value exceeds then we raise a error message
Basically we plan to do this check in real-time, whenever a RO document is being entered we do this calculation in real time.
Please advice if you think this is a feasible approach, or in case you have any other suggestions for storing Threshold amounts in SAP and working with.
Thanks a lot in advance.
BR,
Sahadj

dear friend,
your approach looks okay from my point of view...
you would also append VBAK table creating a new custom field for your purpose and adjust the relevant code(s)
good luck!

Similar Messages

  • SO Header DFF values to be passed to PO in Dropship Sales Order Process

    Hi Friends,
    In the Dropship sales Order process, after booking the Sales Order we run the Requisition Import to get the requisition in approved status and subsequently PO is autocreated.
    Problem Statement:
    (1) In the SO, we have defined DFF wherein we are capturing few values, the requirement is to replicate those values to the auto-created PO. Requesting for some hint/solution preferably from front end.
    (2) In case, we are able to replicate the values. Can we exclude few attributes from being replicated. Ex. I have 7 attributes in SO's header level DFF and only 5 out of 7 to be replicated on PO header level DFF.
    Thanks.
    With Best Regards,
    Nirabh Nayan

    There is no seeded functionality to transfer the DFF info from drop ship SO to PO.
    You will have to write a customization. (That is what we ended up doing at one client). In the customization, you can write the logic to exclude certain attributes.
    Sandeep Gandhi

  • Bottom/base price check in Sales order processing

    Hi
    In my company we are using process Sales Order > DO > Billing. Same pricing procedure for sales document types and billing types. No pricing procedure for DO. Our management wants to implement bottom price check in sales order processing e.g there must be one sale price on which sale invoice will be booked and there must also be one static price maintained and system will check after all taxes and discounts calculation that net value should not be less then bottom price.
    Currently we are using user exit in enhancement MV45AFZZ. Our ABAPER has written logic in this of following scenario. We have maintained commercial price in ZCOM condition type and bottom price in ZBAS condition type. Lets take and example
    ZCOM = Sale price= 500
    ZDIS = Discount = 100
    Net value/Amount for credit check 500-100 = 400
    ZBAS Bottom price = 450
    In above scenario system should not allow to save sale order/billing document and give error "Sale price is below bottom price" Then user will change the discount from 100 to 50 and Net value will be then 450 and system will allow to save sale order/billing document.
    I want to to do this in Pricing procedure pricing routines. Please tell me is it possible with calculation types? Im wondering if we can do this in enhancement then we must write the same logic in VOFM pricing routine and we can control this from there too. In our current ABAP check everything is working fine but I just want to minimize the use of ABAP checks and enhancements and control the things from functional side not from ABAP.
    Please let me know if someone need more clarification or someone have any productive suggestions in this regard. If there is any other solution it will be highly appreciated.
    Thanks in advance.

    Similar functionality is already there, where if the net price of an item differs from "Customer expected price" (conditions EDI1/EDI2) then SAP automatically pushes the order into incompletion. You can ask the developer to see how EDI1 is used in the pricing logic.
    However, the condition EDI1 is used to check if the item value is different to Customer expected price in case of EDI orders and is not standard for your requirement. But you get my drift, that you can have your own condition in the pricing procedure that will fetch the base price value and can be used in the logic to show an error message (to stop order processing) or push into incompletion log similar to condition EDI1

  • In third party sales order process how  business come to know that the vend

    Hi SD Gurus,
    In third party sales order process how  business come to know that the vendor has delivery the goods to the customer?
    Where Business will check whether Vendor has delivered the goods or not to the customer?
    Thanks & Regards,
    Nivas

    Hi,
    Process
    VA01 - Create sales order (Schedule line CS and item category TAS) >> ME52N - PR is generated after save of sales order >> ME21N - Convert PR in to P.O >> Then vendor will send goods to customer and will send invoice to our company >> MIRO - Invoice receipt from vendor >> VF01 - Final invoice to customer
    When you enter vendor invoice then you come to know that vendor sent qty. same will be billed to customer(Billing relevance in item category should be F)
    Kapil

  • Sale order Processing status

    Hi gurus,
               Where we check the sale order processing status configuration ?
    Regards,
    T.Murugu

    Dear Murugu
    If you see the document flow of the particular sales document, you can see the status.
    If you want to know where the control is, go to VTLA, for the combination of your order type and delivery type, select your item category and execute.  There you can see a field Update document flow.  You have to check this box for status updation.
    thanks
    G. Lakshmipathi

  • Sales Order processing - Sale from stock

    Dear Gurus,
    What are the configuration steps involved in Sales Order Processing- Sales from Stock.
    Kindly let me know.
    Regards
    Prashant Ranalkar

    Go with Make To Stock scenario.  For configuration details, make a search in this forum.
    thanks
    G. Lakshmipathi

  • IN which table stores the Value of sales orders Net Value

    IN which table stores the Value of sales orders Net Value

    Hi Lakshmi,
    Check Following Tables:
    CRMD_PRICING_I
    CRMM_PR_SALESA
    CNCCRMPRSAP00090
    Reward Points if Helpful.
    Srini.

  • In Third Party sales order processing how we come to know that the customer

    Hi SAP SD Gurus,
    In Third Party sales order processing how we come to know that the customer is recived the Goods from the vendor?
    Thanks & Regards,
    Sreenivas.P

    From a high level view, the behavior should work like this:
    -  Sales order placed from customer PO via Tcode VA01. Purchase Requisition created upon saving the order
    -  Purchase order created with reference to Purchase Requisition via Tcode ME21N
    -  Receive confirmation from vendor that goods have shipped via EDI
    -  Create invoice receipt to vendor via Tcode MIRO
    -  Create billing document to bill customer via VF01

  • Pricing amount and condition value in sales order

    Hi all,
    I have noticed for a sales order we are not able to see condition type amount, condition value in sales order even though it shows net price finaly ofr a sales order. Not even able to select the condition lines.
    To be specific not able to find value in field KBETR  - amount column and KWERT - condition value column
    When we go to sales order line item and select condition tab, do see value displayed in Amount and Condition column. Is there are specific reason it is doing visa vis in our production we see both values.
    Advise what could be the reason value not getting displayed in Amount and Condition value column.
    thanks

    It is due to auth for specific columns we have solved the problem.

  • Net Value in Sales order item and header URGENT

    Hi experts
    In some sales orders the net value is not shown but it is available in PR00 condition.
    Where should i check pricing proceedure or copy control,
    In the same sales order type i.e ZRP other sales orders are having net value,
    this sales order is created with reference to sales order type RE.
    Pls guide where to check and what correction needs to be done.
    Thank u in advance.
    regards
    SM

    Hi,
    Pricing procedure in tcode V/08, check the field 'SubTo'.
    Copy control in tcodes VTFA (between SO and invoices).Check the field 'pricing type' for conditions.
    I hope this help you,
    Regards,
    Eduardo

  • Net Value in sales order item

    Hi All,
    Any one know how the system set net value in sales order item? (VBAP-NETWR)
    I mean, what kind of condition type will be considered in net value calculation.
    Thank you

    Hi,
    In Sales Order net value (NETWR) is always value before tax, it means the condition type determined before tax condition will be considered in sales order Net Value.
    In other words if conditon type have a category defined as D-Tax and Cond. class as D- Taxes, the value of this condition type will not be considered in Net value.
    regards
    Vivek.
    Edited by: Vievk Vardhan on Jan 7, 2010 2:00 PM

  • Availability check of raw material during sale order processing

    Dear experts,
                           When i am entering the finished good in sale order processing,system should check the raw material availabilty.Is it possible in STD sap
    Regards,
    murali.R

    thanks to you all for your reply,
    My customer is bright bar manufacturer,They just buy the steel bar & process it & sell it to the customer.So there is only one RAW MATERIAL.
    Their all the activities are mainly based on raw material.So customer wants.....when we enter the finished good system should check the RM stock,based on RM STOCK,sytem should do the availability check...& confirm the delivery date
    I have mapped customer requirement,after modifying item category & assignment......
    Sales BOM explosion & delivery group is maintained for header material.availability check is on at component level & header level.So now system consider the raw material stock & it conform the dates when  i do availability check combinely.
    I would like to know how it will affet the MRP incase of alternative BOM....FURTHER PROCESSING
    Is it the right practise.....Please reply...............

  • SAP R/3 to External System RFC issue during Sales Order Processing

    Hi Experts,
    We have one Peculiar issue in our SAP R/3. Request you to help me in resolving this.
    Order Processing:
    During Sales Orders Processing, for every line item a RFC is being initiated from SAP R/3 to an external system called Trilogy Pricer to get the Pricing data. 
    Trilogy Pricer sends the Pricing data to SAP R/3 and the respective Orders are being processed in SAP R/3.
    Current Issue:
    The issue we are facing is that, once the Pricing data is sent to SAP R/3, Trilogy Pricer expects an acknowledgement (RFC_OK) from SAP R/3 in order to release the RFC connection.  Intermittently, Trilogy Pricer is not receiving this or any kind of acknowledgement from SAP R/3 causing the connection to hang which is causing several problems.
    For example:
    On every business day, there will be 50,000 Sales orders.
    So, 5 or 10 sales orders are getting hanged every day.
    We tried to simulate this issue in Dev and Stage environments by processing 30,000 to 40,000 sales orders.
    But we were unsuccessful, which means all the RFC connections were being closed as the external system is able to get the acknowledgements for all those orders from SAP R/3.
    We are having this problem only in Prod.
    Any thoughts to solve this issue is highly appreciated.
    Advance thanks for your great help.
    Thanks and Regards,
    Srinivasa

    Hi I am not sure if it was similar issue, but I once had a kindaa problem I solved using
    CALL FUNCTION func STARTING NEW TASK task
                  [DESTINATION {dest}]
                  [{PERFORMING subr}|ON END OF TASK].

  • Third party sales Order processing

    Hi gurus,
    During Third party sales order processing, Purchase requision has been generated with account assignemnt category 'X',
    While converting the Purchase requisition to Purchase order the system is not allowing me to save the purchase order,
    As soon as i hit the save button the Pricing conditions are being deleted in purchase order ?
    When i hit the save button again System is throwing me out giving a message
    System error (error in method PO_CHECK)
    Message no. ME816
    This is happening only when a purchase order is being created for third party sales order processing.
    Has any one faced this issue before, if yes please advise gurus,
    Thanks in advance,
    Kind regards,
    Gopio.

    Hi
    The account assignment category X has been maintained in
    schedule line category CS and it is recommended by SAP
    Yes perfectly right
    SAP recommends only X as account assignment category for CS
    If the PR is created successfully then there is no problem with  related to SD configurations
    The error message is more of an MM error
    You need to check with an MM expert why that happens while creating PO from PR
    I feel since this happns while saving the transaction there might be some userexit used which may be root cause
    System error (error in method PO_CHECK)
    Message no. ME816
    As per my knowledge this is not a standard error
    Because of activation of some userexit this is triggered
    Functionally this is a MM area error
    From SD side everything is correct
    Regards
    Raja

  • Gross order value in sales order currency.

    hi to every one,
             am fresher in ABAP programming, can u plz help me by saying the Gross Order Value in Sales Order Currency
    as the Gross Order Value in Purchase Order Currency  is BBWERT .
    REGARDS.
    SAI KRISHNA

    Hi Sai,
    You can use that data element BBWERT as type in your program to get the value, however the best practice is to identyfied the fields and tables in each module in order to use as reference for the program variable.
    Regards
    Alexis Ramirez

Maybe you are looking for

  • An exception occurred during request processing

    Hi, When i am going to create activity as task  it's showing error please advice me how to resolve this issue. Diagnosis An exception occurred during request processing. This was handled centrally. It changed the program flow and the result of the re

  • Add XML Element ID to all elements as attribute

    Hi There, The title hopefully states what I like to get. I'm having quite some documents that are tagged, but want to add an id to all elements to allow for better XML manipulation outside on Indesign. I've been looking around a bit but seems to be n

  • Photo clickable

    ok, i have a question, on which i can´t seem to find the code for. I have a photo album in me website where users can create their own ones At the moment i have so that they can click on previous<<<<<<<  or >>>>>>>next or as you can see in the screen

  • Configuring Standard ESR ESOA XML message Reciever and Sender for PO Creati

    We are trying to send to our SNC system the standard XML Message PurchaseOrderERPReplenishmentOrderCollaborationNotification_Out when we create a purchase Order. We are able to generate and see the XML message in SXMB_MONI but the XML status Message

  • Freezing and itunes not found questions

    I have two concerns/questions 1. why does my itunes application never work. I hit itunes try to see the store or when I'm using Panda it says itunes cannot be opened or some such message 2. my phone semi froze today (again but different this time). I