Threshold Violation Error

hi All,
I am getting an error as below on a 3750V2 connecting to a 6509 WS-X6724-SFP port. I am getting Input errors on interface at 3750v2 side.
3750V2# sh logg
Apr 14 09:42:57: %SFF8472-5-THRESHOLD_VIOLATION: Gi1/0/1: Rx power low warning; Operating value: -17.6 dBm, Threshold value: -17.0 dBm
Input Error O/p is as below;
3750v2#sh int gi1/0/1 | in CRC --> connects to first core switch
7130 input errors, 153 CRC, 0 frame, 0 overrun, 0 ignored
3750v2#sh int gi2/0/1 | in CRC --> connects to second core switch
18418 input errors, 611 CRC, 0 frame, 0 overrun, 0 ignored
Please let me know if this error or alert is a cause of concern.

Hi ,
This could be because of ::
Avago SR erroneously reports THRESHOLD_VIOLATION
CSCsz81516
If you are concern about the errors, you might need to open a TAC case to get the faulty module replaced.
Thanks-
Afroz
***Ratings Encourages Contributors ****

Similar Messages

Interface Threshold Violation

Hi Guys,
I have 8 access points and a 5508 series WLC. I am getting the below alerts
Message: Interference threshold violation reported by '802.11b/g/n' interface of AP 'KPAP0000.f4a6', connected to Controller '10.69.186.21'.
Message: Interference changed to acceptable level on '802.11b/g/n' interface of AP 'KPAP0000.1b40', connected to Controller '10.69.186.21'.
On seraching the forum, i found the below details:
Recommended Actions If the interference threshold is configured to be too low, you may need to readjust it to a more optimum value.
Investigate interference sources such as other 802.11 devices in the vicinity of this radio interface
Im my current configuration i have threshold under 802.11a>RRM>general
Profile threshold for traps - 10% [which is the default]
Just wondering is that the value i need to change. Is there any standard optimal value. Or do i need to find out using trail and error.
Thanks

It really depends. You can adjust them until they go away or your fine with the amount of alerts you receive. So the one thing that is mentioned is interference. Have you checked for interferes? Do you have neighboring access points on the 2.4ghz? All these things have an affect in your RF and how these alerts are being generated. So I would try to identify any 2.4 ghz interferes and then play with the threshold value.
Sent from Cisco Technical Support iPhone App

Dropped clients and Load threshold violation

Can someone tell me if a load threshold violation can lead to dropped clients. Is this error message just a notice or does the controller drop clients after reaching the threshold value.
Thanks
Chris

Can you do a show wlan for me and post the results.
Do you have load balance enabled ?
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

Load threshold violation - gap in voice audio

Hello,
I have a lot of 7925 Phones, two 3750 with integrated WLC (6.0.188).
The Costumer says that he has a lot of gaps in voice audio. I have testet it and can't recognize any gap.
I said to the customer that he has to write down the time when there are any problems with the audio stream.
I could recognize that there is a minor alarm in the wcs at the same time when the problems occur.
I could also see in the log of the ap that there is an reset of the a radio after the alarm is generated
The WCS Error message is
Load threshold violation reported by '802.11a' interface of AP 'AP-DE-HQ-033', connected to Controller.....
What could be the reason of these error message? Wich kind of treshold is meant and where i can configure it.
I hope someone can help me

Sir,
The load threshold violation is generated because of client count on a given AP, I am not aware of any bugs or features that would cause this to occurr in correctly. basically this alarm is triggered when the client count exceeds the preset threshold value which I believe is 12. You can find this threshold under Wireless> 802.11a> RRM>General (on WLC 6.0.118.0 code, it'll be in the same general area on 4.2; Don't confuse it with the coverage hole threshold which is usually 3). Definitely check the client counts on the access points have the issues.
If you are violating this threshold there are a couple of options: 1) raise the threshold to a higher value; the downside to this is if you get too many clients on a single AP it can have adverse effects on all the clients. 2) add more access points to lower the possibility of all clients being on 1 AP..
Hope this helps,
Kayle

Password Violation error while creating users from Admin interface

Guys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
Vijay

Guys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
Vijay

ORA-00001 Unique constraint Violation Error

We are upgrading our NW BW 7.01 java server to 7.3 and during the Downtime phase of the Installer, while running the Offline Migration, we are getting an error "EP-KM-BC: Unique Constraint Violation error: ORA-000001". Unknown Object# (12xxxxxx) does not exist. We have one CI and two DI. Any help would be greatly appreciated.

Hi Anil,
You need to clear the data from the table
1. SHD_AP_PROPVALUE
2. SHD_KMC_AP_PROP
3. SHD_AP_MC
Repeat the phase and also follow the sapnote
1873288 - RUN_OFFLINE_MIGRATION phase fails during SAP NetWeaver migration
Also paste the logs of RUN_OFFLINE_MIGRATION phase.
With Regards
Ashutosh Chaturvedi

Unique Key Violation error while updating table

Hi All,
I am having problem with UNIQUE CONSTRAINT. I am trying to update a table and getting the violation error. Here is the over view. We have a table called ActivityAttendee. ActivityAttendee has the following columns. The problem to debug is this table has
over 23 million records. How can I catch where my query is going wrong?
ActivityAttendeeID INT PRIMARY KEY IDENTITY(1,1)
,ActivityID INT NOT NULL (Foreign key to parent table Activity)
,AtendeeTypeCodeID INT NOT NULL
,ObjectID INT NOT NULL
,EmailAddress VARCHAR(255) NULL
UNIQUE KEY is on ActivityID,AtendeeTypeCodeID,ObjectID,EmailAddress
We have a requirement where we need to update the ObjectID. There is a new mapping where I dump that into a temp table #tempActivityMapping (intObjectID INT NOT NULL, intNewObjectID INT NULL)
The problem is ActivityAttendee table might already have the new ObjectID and the unique combination.
For example: ActivityAttendee Table have the following rows
1,1,1,1,NULL
2,1,1,2,NULL
3,1,1,4,'abc'
AND the temp table has 2,1
So essentially when I update in this scenario, It should ignore the second row because, if I try updating that there will be a violation of key as the first record has the exact value. When I ran my query on test data it worked fine. But for 23 million records,
its going wrong some where and I am unable to debug that. Here is my query
UPDATE AA
SET AA.ObjectID = TMP.NewObjectID
FROM dbo.ActivityAttendee AA
INNER JOIN #tmpActivityMapping TMP ON AA.ObjectID = TMP.ObjectID
WHERE TMP.NewObjectID IS NOT NULL
AND NOT EXISTS(SELECT 1
FROM dbo.ActivityAttendee AA1
WHERE AA1.ActivityID = AA.ActivityID
AND AA1.AttendeeTypeCodeID = AA.AttendeeTypeCodeID
AND AA1.ObjectID = TMP.NewObjectID
AND ISNULL(AA1.EmailAddress,'') = ISNULL(AA.EmailAddress,'')

>> I am having problem with UNIQUE CONSTRAINT. I am trying to update a table and getting the violation error. Here is the over view. We have a table called Activity_Attendee. <<
Your problem is schema design. Singular table names tell us there is only one of them the set. Activities are one kind of entity; Attendees are a totally different kind of entity; Attendees are a totally different kind of entity. Where are those tables? Then
they can have a relationship which will be a third table with REFERENCES to the other two.
Your table is total garbage. Think about how absurd “attendee_type_code_id” is. You have never read a single thing about data modeling. An attribute can be “attendee_type”, “attendee_code” or “attendee_id”but not that horrible mess. I have used something like
this in one of my busk to demonstrate the wrong way to do RDBMS as a joke, but you did it for real. The postfix is called an attribute property in ISO-11179 standards.
You also do not know that RDBMS is not OO. We have keys and not OIDs; but bad programmers use the IDENTITY table property (NOT a column!), By definition, it cannot be a key; let me say that again, by definition.
>> ActivityAttendee has the following columns. The problem to debug is this table has over 23 million records [sic: rows are not records]<<
Where did you get “UNIQUE KEY” as syntax in SQL?? What math are you doing the attendee_id? That is the only reason to make it INTEGER. I will guess that you meant attendee_type and have not taken the time to create an abbreviation encoding it.
The term “patent/child” table is wrong! That was network databases, not RDBMS. We have referenced and referencing table. Totally different concept!
CREATE TABLE Attendees
(attendee_id CHAR(10) NOT NULL PRIMARY KEY,
attendee_type INTEGER NOT NULL --- bad design.
CHECK (attendee_type BETWEEN ?? AND ??),
email_address VARCHAR(255),
CREATE TABLE Activities
(activity_id CHAR(10) NOT NULL PRIMARY KEY,
Now the relationship table. I have to make a guess about the cardinally be 1:1, 1:m or n:m.
CREATE TABLE Attendance_Roster
(attendee_id CHAR(10) NOT NULL --- UNIQUE??
REFERENCES Attendees (attendee_id),
activity_id Activities CHAR(10) NOT NULL ---UNIQUE??
REFERENCES Activities (activity_id)
PRIMARY KEY (attendee_id, activity_id), --- wild guess!
>> UNIQUE KEY is on activity_id, attendee_type_code_id_value_category, object_id, email_address <<
Aside from the incorrect “UNIQUE KEY” syntax, think about having things like an email_address in a key. This is what we SQL people call a non-key attribute.
>> We have a requirement where we need to update the ObjectID. There is a new mapping where I dump that into a temp table #tempActivityMapping (intObjectID INTEGER NOT NULL, intNewObjectID INTEGER NULL) <<
Mapping?? We do not have that concept in RDBMS. Also putting meta data prefixes like “int_” is called a “tibble” and we SQL people laugh (or cry) when we see it.
Then you have old proprietary Sybase UODATE .. FROM .. syntax. Google it; it is flawed and will fail.
Please stop programming until you have a basic understanding of RDBMS versus OO and traditional file systems. Look at my credits; when I tell you, I think I have some authority.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Sharing Violation error when inserting a table

Hi Everyone.
I know this question has been asked before but no one seems to have a working solution.
We have Macromedia MX (6.1) installed on a room with windows 7 on all the computers, on a server 2008 network, connectiing to a server 2003 user area server. It seems to work fine until you try to insert a table which is different to the default options. It then throws up a sharing violation error to do with the table.htm file under the Application Data\Macromedia\Dreamweaver MX\Configuration\Objects\Common\ folder. The program then closes. The things I have tried to get this working so far are -
uninstall and reinstall
deletion of the Application Data\Macromedia\Dreamweaver MX\Configuration\ folder
changing location of Application Data\Macromedia\Dreamweaver MX\Configuration\ folder from network drive to local drive
making sure the user has complete ownership of the folder and the file in question. They do
checking the same problem exists with an adminstrator account and a normal user account. It does.
having the user log on to a windows XP machine connecting to the same server with the same log on account. This works fine! So almost certainly a problem with Windows 7.
runnning the dreamweaver program as administrator
changing where the site is saved to.
Im really all out of ideas. Yes i know that its an old version and the newer versions work a lot better, but this is all we have at the moment.
I really appreciate any help!

Hi Chrissy,
According to the description, you were not able to save the workbook after you typo some VBA code. Which version of Office are you using? Are you save it manully?
Based on my understanding, this issue is not realtive to the code and it maybe a know issue about Office 2007. You can fix it via link below:
Description of the 2007 Office system hotfix package (Msoshext-x-none.msp): April 27, 2010
If you still have the issue save it manually, I would suggest that you reopen a new question in
Microsoft Community- Excel forum to get more effective response.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Primary Key rule Violation error while Insert Record in Compact DB

Hi All,
I have One Table in Server Name "Student" when i Synchronize this with the help of Microsoft Synchronization Framework
same Table schema with Data has been create in CompactDataBase.
When i insert data in CompactDataDase it give me Primary Key Violation error.
Please Suggest
Example
Table Structure is as Follows:-
Create Table Student(
[Emp_id] int IDENTITY(1,1) NotNull,[Emp_Name] int NOTNULL );insert into Student Values('John');insert into Student Values('Joe');Thanks & RegardsNamit Jain

try this and see if it solves,
also, Emp_name data type is int. it should be varchar.
I suspect the reason is because you already have some data in student table but you identity seeds were not updated and hence it is trying to insert a row with emp_id value that already exists.and hence the primary key violation. also, your table DDL did
not really have an primary key but it would still error since you are inserting duplicate row in the identity column.
so, try resetting the identity seed value to the max(emp_id) in the table.
select max(Emp_ID) from student
--use the output of the above statement
DBCC CHECKIDENT ('Student', RESEED,<<--use the output of the above statement-->>)
--your max(emp_id) should match with last_value column in the below( do not if this query would run in compact DB though)
select seed_value,increment_value,last_value from sys.identity_columns where object_id=object_id('Student')
now, try your insert.
Hope it Helps!!

The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error. : Error: An Active Directory Constraint Violation error occurred

Hello,
We have a multi domain parent child AD domain infrastructure and now we upgraded our exchange from Exchange 2007 to Exchange 2013. Since last few days, we see the below error on the mailbox server event viewer.
EVENT ID : 1121
The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
Request GUID: '93a7d1ca-68a1-4cd9-9edb-a4ce2f7bb4cd'
Database GUID: '83d028ec-439d-4904-a0e4-1d3bc0f58809'
Error: An Active Directory Constraint Violation error occurred on <domain controller FQDN>. Additional information: The name reference is invalid.
This may be caused by replication latency between Active Directory domain controllers.
Active directory response: 000020B5: AtrErr: DSID-0315286E, #1:
Our Exchange setup is in parent domain, but we keep on getting this error for various domain controllers in each child domain in the same site. We then configured one of the parent domain domain controller on Exchange. Still we are getting this error for
the configured parent domain DC.
Verified the AD replication and there is no latency or pending stuffs.
Any support to resolve this issue will be highly appreciated. Thank you in advance.
Regards,
Jnana R Dash

Hi,
In addition to Ed's suggestion, I would like to clarify the following things for troubleshooting:
1. Please restart IIS at first.
2. If the issue persists, please ping your DC on your Exchange server to check if Exchange can communicate with DC.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Error while executing "" command Error type ACCESS VIOLATION Error Address: 0006898E Module name:gfsdesk.DLL

Hi All,
I'm using diadem from .net Program. While on the run I'm getting the following error.
Error While executing "" Command
Error type ACCESS VIOLATION
Error Address: 0006898E
Module name:gfsdesk.DLL
Anyone have any idea why this is happening?
regards,
Swaroop

Hi Swaroop,
It would be helpful to better understand what your code really does. The information that you called DIAdem from your enviroenment is not yet sufficient to understand what the problem might be.
Andreas

Access Violation error with Diadem 2011

I've started using Diadem 2011, and have run into an Access Violation error when loading some of my existing reports. I've created a simple example which shows what's happening:
I've created a simple Bar plot:
If I change the left hand bar to be "Filled" instead of "Right Diagonal", Diadem throws up an access violation error. I've attached the TDM and TDR files used to create the graph. The error in the log file is:
139 Error while executing "" command
     Error type: ACCESS VIOLATION
     Error address: 0004F5E5
     Module nameIAdem.exe
Diadem: 11.0.3f4563 TDM
USI: 1.9.0f4551
DataFinder: 3.0.0f4556
(By the way, it would be great to be able to copy those version details directly from the About page!)
Attachments:
Data.zip ‏7 KB

I've tried this as administrator, and have exactly the same issues, so it doesn't appear to be a permissions problem. I've uninstalled and reinstalled DIAdem and everything's the same.
Here's another ZIP file with hopefully all of the required files. I've created the data files from scrathc several times, and see the same problem. One other thing I've just noticed is that it only occurs when filling the bars with the color Black, not blue or red or anything else.
Attachments:
Data.zip ‏9 KB

ORA-44410: XE edition single instance violation error

Hi Experts,
Im trying to clone my database into another machine, That machine already have the XE database.
I created pfile ad password file for the new database.
After that
I did like this
oracle@sys23 ~$ ORACLE_SID=red
oracle@sys23 ~$ sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Dec 3 10:03:26 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-32004: obsolete and/or deprecated parameter(s) specified
ORA-44410: XE edition single instance violation error
Please provide me the solutions
Advance Thanks
Sundaravel.R

With Oracle XE, you can run only one instance. What you are trying to achieve is not possible with Oracle XE. You need to change your edition of Oracle if you want multiple instances running on the same machine.

JDeveloper 3.2 Problems - Access violation errors

Hi,
I suddenly got the following error message on a dialog box when I was editing code in the visual designer:
QUOTE
Access violation at address 00402FC8 'jdeveloper.exe'. Read of address FFFFFFF
UNQUOTE
When I tried to save my work, I was not able to received a similar message. When I tried to exit, I recived the following message:
QUOTE
JDeveloper was unable to autosave the current workspace. Do you wish to close the workspace anyway?"
UNQUOTE
After exiting the workspace, I was not able to reopen the workspace. I created a new workspace and added my projects to the new workspace. I was happy that I did not lose my work.
I have received the access violation error before. I do not know what causes it and I would appreciate very much if the JDev team explains why such an error occurs.
Thanks.

Hi,
We intermittently see postings of this kind. The more information you can provide us about your environment and what you are doing when you get the error, the better:
1. What OS are you running (include version and SP).
2. What kind of processor does your machine run?
3. Do you have a single processor or multiple?
4. What kind of project were you working on? Did you create an empty project and a new class file and were just editing source code, or did you create some initial content using one of the wizards from the Object Gallery and were modifying the generated code, or did you import existing code from some other location?
5. How many source files did you have in the project?
6. Was the source file you were editing a .java file, or a .jsp, .xml, .html?
7. Does this happen frequently, or is this the first time? Has it happened since?
Again, the more detail you can provide, the better we are able to identify possible sources of trouble.

Issue with INSERT INTO, throws primary key violation error even if the target table is empty

Hi,
I am running a simple
INSERT INTO Table 1 (column 1, column 2, ....., column n)
SELECT column 1, column 2, ....., column n FROM Table 2
Table 1 and Table 2 have same definition(schema).
Table 1 is empty and Table 2 has all the data. Column 1 is primary key and there is NO identity column.
This statement still throws Primary key violation error. Am clueless about this?
How can this happen when the target table is totally empty?
Chintu

Nope thats not true
Either you're not inserting to the right table or in the background some other trigger code is getting fired which is inserting into some table which causes a PK violation.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Threshold Violation Error

Similar Messages

Maybe you are looking for