Thrid Party Scheduling Software BPC 7.0 SP5

I'm curious if anyone out there uses something other than Data Manager/Windows Scheduler for running and scheduling their jobs. As our compaines design currently stands we run multiple jobs quite frequently and could benifit from a scheduler that has the ability to set dependencies. Any help or ideas would be great!
Mark

Mark,
We have a utlity that can be used with BPC, If you can share your email, I can send you some documentation which will help you.
Sam.

Similar Messages

Third Party Scheduling Software BPC 7.0 SP5

I'm curious if anyone out there uses anything other than Data Manager/Windows Scheduler to run and schedule jobs in their version of BPC. As our companies design currently stands we run multiple job on a very frequent schedule and could benifit from a more robust scheduler that uses dependencies. If anyone has any ideas or has ventured down this road please lend a helping hand.
Thanks,
Mark

Mark,
http://bpmconnect.blogspot.com/2009/08/bpmc-overview.html
Please see above link, this is complete ETL utility for SAP BPC. There is no licensing fee for this tool.
Hope this helps.
Sam

Third Party Scheduling Software BPC 7.0

I'm curious if anyone out there uses anything other than Data Manager/Windows Scheduler to run and schedule jobs in their version of BPC. As our companies design currently stands we run multiple job on a very frequent schedule and could benifit from a more robust scheduler that uses dependencies. If anyone has any ideas or has ventured down this road please lend a helping hand.
Thanks,
Mark

I don't know if I'm missing something here or if we aren't on the same page....
I want to completely rid myself from using DM/Windows Scheduler because of it's simplicity and use some other form of scheduling software that's more robust. For example, in some of our development environments we've played around with using SQL Agent (SQL Server's Scheduler) to run jobs for BPC application sets. This works for jobs created without BPC custom controls(logic task,send mail task, Dump Load Task, etc.) but fails when we try to use them. What we've deduced is that SQL Agent, being installed on our DB server, can't talk with the BPC custom controls that reside on the application server. What we've tried....
1) installing the custom controls on the DB server which entails knowing what .dll files need to accompany the controls and registering them properly. This was a headache and even with SAP's help was a dead end.

FI Changes for HR Payroll Integration with Thrid party Payroll Software

Hi
I am looking for information the SAP FI activities/ Changes to be done for enabling SAP HR Payroll integration with third party payroll softwares. Can you give some issues you might have encounter and any recommended thrid party payroll softwares. Highly appreciate any documentation on the same.
Regards,
Vic

Download all the files into Execel, hope after tht u can change it to CSV.... To download HR MASTER DATA use Ad-Hoc qqry. Else use SE11, SE12 or SE16 to download IT wise. PA starts with PA0000 ets OM starts with HRP1000. Hope through this u can download and send to 3rd party system....
In std we are having an option for 3rd part PY transfer. Check this if help
SPRO>CROSS APPLICATION COMPONENTS>PREDEFINED ALE BUSINESS PROCESS> HUMAN RESOURCES>HR EXTERNAL SYSTEM

Third Party Reporting Software

Can anyone give me a line on thrid party reporting software that dips into the CUCM and has the ability to create custom reports and then send them via email, FTP, text, etc. Need something that can be scheduled and automated as well. The CUCM is very limited. Don't want to do a bunch of sql stuff either. Need something that a simple administrator(s) can operate from a gui.

Hi John,
Sorry for the delay...I'm not on the support forum on a regular basis. This maybe an answer to your request - it's web-based, you can customize your reports with the data fields you want, schedule delivery of the report via email or FTP. Here are some screenshots:
It's called Variphy Insight. You can find them online via Google, and ask for a free trial. Mention you found them via the Cisco Support Forum and they'll extend the 15-day trial license to a 90 day trial.
Regards,
Chris

UOM issue of SR that push from third party integrated software into SAP

Dear SAP Expert/Guru,
Would like to seek for your advise what is to be done to check the issue of different UOM created in SR when push from thrid party intrgration software into SAP.
The material only being maintained 1 UOM which is PKT however, when the data being push from the integration software it created the material with the UOM CTN and this cause the whole SR cannot be used.
Is there any way to check between the data integration? The client is using BAPI to push the data.
Currently the client just implement PI module and the third party software is integrated with PI module.
Kindly advise is there any other way to check.
Thank you
Regards
Leonard Tan

Dear Shailesh & Jurgen,
Due to the T-code CUNI is maintained as Fire Fighter in the production server, so I only can use the QA server to analyst the UOM maintained in the server.
Below is the result of the analysis:-
ISO Code ISO code text
CT CTN
PK Pack (assuming this is used as packet)
As in the Change Units of Measurement of Dimension: Overview. THe result as shown:-
Unit Commercial Technical Meas.unit text
CTN KAR CTN Carton(SC)
PKT PKT Pkt Packet(s)
When double click the "Units of Measurement, select any unit and click on the lens, here you will see a small box called ALE/EDI, you will get to see the ISO Code in the box and a small checkbox called primary code"
There is no checking being clicked at the primary code and nothing is being keyed in the ISO code
Kindly advise what is to be done? is it the ISO issue or is there any setting being done wrongly.
Thank you
Regards
Leonard Tan

Clients repeatedly asking for update in BPC 5.1 SP5 (Patch 2)

Hi guys. Hope you can help.
I am running a Dev server with BPC 5.1 SP5 Patch 2 and have enabled Auto-Update for Clients and Admins.
When I log on, I receive the message that a new update is available for my software and it installs perfectly (I am a Local Admin on my own PC).
However, when a client without Local Admin privilege on their PC connects, it tells them that the update is available and proceeds to install it.
However, once it reaches the end of installation and you re-connect to the server, it again tells you that an update is available......
This process never ends.
We have the server setup with a Domain Admin account for the auto-update and have applied Patch 2 and the workaround to fix non-installation of the updates.
As I said, it works for Local Admin clients, but whilsty it appears to work for non-Admins, it must be failing to update something (most likely the registry key with the version numbers in).
On my PC (that does update properly), I have the following keys:
HKEY_LOCAL_MACHINE\SOFTWARE\OUTLOOKSOFT\50\ADMIN\VERSION = 5.0.502
HKEY_LOCAL_MACHINE\SOFTWARE\OUTLOOKSOFT\50\ADMIN\UPDATEVERSION = 5.0.506.02
I can't check the failed client yet, as I'm not an Admin on that PC
Has anyone any suggestions?
Thanks
Craig
Edited by: Craig Aucott on Mar 6, 2009 4:56 PM

Thanks to all for the repsonses so far.
So, Sorin, are you saying the the client auto-update will only work for users who are a local admin on their PC ???
I thought that that was the reason for having the option to enter an admin account into BPC Server Manager for Auto-Update - To override the local user, and allow the update to happen.
So I guess my question now is whether it is possible to run this update (most of my clients are not local admins), or whether I need to look at deploying the SMS version via either Altiris or an Active Directory installation?
Thanks again
Craig

I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?

I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?
All the information that I had input on Quicken is gone. I have to have the external hard drive that I use to back up to be able to use quicken now. It is as if it was erased from the laptop hardrive

Try repairing permissions. My favorite way is with a utility called AppleJack. Info and download here. It's free. It only works when you boot in Single User Mode. When restarting or booting, hold down the Command key and S keys.
You will get a very different startup screen that looks like the Terminal app has hijacked the screen. Just let the lines of text scroll by. When that happens you will get a text entry prompt. Type in "AppleJack" without the quotation marks.
A DOS looking menu will appear. Choose 1 or d to run Disk Repair. If you get a message that Disk Repair found and corrected errors, run it again. Repeat until you get the "your disk appears to be ok" message. This rarely happens with my experience, though. This does the same thing as as booting from an external drive and running Disk Utility's repair. Only, no external drive is required!
Next, choose 2 or p to repair disk permissions. This will take a little while. AppleJack warns that it will take up to an half hour to run repair permissions. It'n never taken more than about ten minutes for my MacBook Pro.
As permissions are repaired, you will see each repair scroll on the screen. When done, the menu returns, choose q to quit. Then at the prompt, enter "exit" without the quotes. Your MacBook Pro should restart into Mac OS normally after this.
Hope this helps.

MacBook Pro 10.6.8 My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it. All this after a scheduled software update. Any ideas??

MacBook Pro 10.6.8 My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it. All this after a scheduled software update. Any ideas??

kwmlr439 wrote:
CSOUND Read the title please:
Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
Message was edited by: Shootist007
Message was edited by: Shootist007

Student needing some questions answered about Manufacturing Scheduling software

Greetings;
I am a undergraduate senior at Arizona State University majoring in Supply Chain Management. I am currently doing a project about Oracle's Manufacturing Scheduling option and have a few general questions for those of you that have used the software and/or involved with its implementation. Your help is greatly appreciated. If you are uncomfortable releasing your company's name that is fine. If you do not want to post the answers here, I can also be emailed at rmkraus"SAYNOTOSPAMBOTS"@asu.edu. Thank you!!
The questions I have are:
What is your experience with the manufacturing scheduling software?
What is/was your role with the software?(ie buyer, consultant, user, technical support, etc)
How do you feel about the software's ease of use?
What training did you recieve or did your company offer?
How much did implementing the software approxiamately cost?
What do you feel are the advantages of the software?
What do you feel are the disadvantages of the software?
Did your company have any problems during the implementation?
Has your company experienced cost savings due to the software?
Have you or your company used any competing software in the past?
Any other insight that you would like to share?
Thank you, I greatly appreciate your help.

Im not sure on 5
I know it's unusual, but if your project budget is
good you may have more than one constructor. At least
that's what I thoughtach.. you poor fellow, you are confused now aren't you.
i bet taht in the fifth question they are talking about 'constructor methods', not procrammers who are constructing the code (or 'contractors')
if your budget allws then you may even have three or 87 contractors, but that's not the case here.
i hope that clarifies things a bit.
and PS! i don't like when people intentionally give bad solutions to others.

The best third party recovery software for OS X?

Can someone please recommend the best third party recovery software for OS X. Accidentally emtied my trash when I shouldn't have.
Thank you for your help.

General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

Information on APO or 3'rd Party Planning Software

Dear Experts,
We are into discrete manufacturing with MTO scenario & want to map the planning process in SAP PP. As we experienced in standard SAP PP has the ability to run MRP and perform unconstrained planning. Capacity Leveling is also very difficult task as the no. of orders are huge in our case.
Can some one please suggest the 3'rd party Planning Software that can be integrated with SAP PP. Also suggest some links on APO from where we can see the features / tutorials of APO.
Thanks & Regards,
Srinathan.

Srinathan,
APO is part of SCM. Here is the SAP SCM site with lots of high level info
http://service.sap.com/scm
APO Supply chain planning overview
http://service.sap.com/~sapidb/011000358700001870512008E
APO online help at
http://help.sap.com/saphelp_scm70/helpdata/en/92/dd013872af2946e10000009b38f8cf/frameset.htm
I don't make recommendations for third party software. However, SAP now has established a partnership with ICON, who created Supply Chain Response Management, an advanced planning tool which SAP now markets, and considers to be an 'add-in'. Some info by SAP at
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000739105&
Best Regards,
DB49

Third party backup software, how is the log sequence working?

Me and a colleague had a discussion about how third party software and full backups locally on the SQL works together.
If we use TSM that do full backups and then logbackups every hour in between for example.
If I between the two full backups from TSM accidently do a "non copy-only" full backup do I then also break the whole log sequence backup from then and untill the next TSM backup is?
Or can I use the full backup from my mistake and then take the log backups from TSM that occured after that fail and restore the database?
I guess this depends on the third party backup software, but in my mind it should work but according to him it doesn't.
Try to "paint" how I mean:
I = full TSM backup
- = log TSM
F = my fail backup full but not copy only.
I---F-------I
^ is where I would want to restore with both my full one and the logs from TSM. Hope you understand what I mean.

yes, you should be able to use the full backup taken in middle and use the rest of the log backups taken afterwards to restore the database.while I do not use TSM, we use QUEST(DELL) LITESPEED, that takes full backup once a day and log backups
every 15mins.
if someone accidentally takes full backup in the middle of day with out 'copy only',
log sequence will break and successive log backups depend on this full back up.
while this should be prevented from happening in first place, you can still restore from native full backup and then apply log backups taken from third party taken after the native Full backup.
if this happens, I would restore the FULLBACKP with NORECOVERY using NATIVE SQL and then use lite speed syntax to restore the log backups.Remember, native sql cannot read third party formatted backups(atleast litespeed), thats why I restore the full backup
using native sql, since it was taken with native sql backup and log backups using litespeed syntax.
Hope it Helps!!
Thanks, well it was just a theory discussion we had about the issue. But none of us could find info on the internet easy to prove our point :) Thanks.

Thrid Party DLL File

Hi,
How to use Thrid Party DLL File through Java Access Bridge or Any other way.
Thanks

You should find the information at http://java.sun.com/products/accessbridge/docs/index.html

Process Chains and 3rd party scheduling tools in 04s

All,
What, if any, 3rd party scheduling tools (Autosys, CTL-M, etc...) deliver certified connectivity with 04s BW? I've had some experience with 3.x in prior lives in having to support a custom abap pgm to submit and monitor process chains via SM37. Has the integration with 3rd party tools changed? If we need to connect with a 3rd party tool, is a custom 'wrapper pgm' still required?
Thanks,

Hi Lonnie,
SAP NetWeaver 2004s comes with the external scheduling tool Redwood Cronacle included. In the next release it will be integral part of the NetWeaver system.
Please check the SAP Service Marketplace for further information
<a href="http://service.sap.com/job-scheduling">SAP Service Marketplace /job-scheduling</a>
Cheers
SAP NetWeaver BI Organsation

Thrid Party Scheduling Software BPC 7.0 SP5

Similar Messages

Maybe you are looking for