THRiVE system software version 1.5.0029 now available

There is a software update available for THRiVE tablets. This new release of version 1.5.0029 improves sleep-and-resume performance and adds additional codec support to enhance the multimedia playback capabilities. We are aware that some users have experienced the inability to resume use of their device once it goes into sleep mode and have made improvements to address this.
Release highlights:
Includes some fixes that improves stability and performance when coming out of sleep mode
Adds support for additional multimedia codecs (AVI, DivX with mp3 audio, Xvid)
Adds display controller enhancements
See this Support Bulletin for a bit more detail on changes in this update.
You can update your system software by either of the following methods:
Tap on the update message which will be sent by the Toshiba Service Station application, or...
Tap on the 'Apps' icon in the upper right corner of the Android Home screen, then locate & tap on the 'Service Station' icon. After launching 'Service Station', tap 'Check for Updates' and follow the displayed instructions.
Enjoy!
Jim
Update: added link to Support Bulletin

I appreciate the fast response to this issue even though I have not been greatly affected by turning off wifi and manually putting the Thrive to sleep after each use. Hopefully those steps will no longer be needed although I think I may have developed that habit by now. Is there a way too provide a way to uninstall Kipersky, which continuously runs even without purchase, or QuickOffice that is duplicated after buying full version? I understand that Toshiba probably has agreements with these and other companies but it would be nice if Toshiba could provide a way to uninstall these and other preinstalled apps that tablet owners don't want, possibly 90 days after purchase registration date, without having to hack the tablet software. Such an option would I am sure be welcomed by all and avoid many folks messing with the installed OS. Thanks again for the prompt update and for keeping everyone advised.

Similar Messages

PS4 System software v 2.57 is now available

Hi guys,
PS4 system software version 2.57 is now available. This is a optional update which improves system stability. You can still connect to the PSN and online services if you chose not to complete this update.
To update the system software via your PS4 system go to Settings > System Software Update > Install.
To update the system software via your PC download the update via USB from the PlayStation website later today.
If you experience any issues updating the system software please follow the steps to 'perform a new installation of the system software' from the system software page.
Main features in version 2.57 update:
System software stability during use of some features has been improved.
Change to the error message when attempting to download content without enough free space. The new message is - Cannot download.
To download the content, you must delete unnecessary content from system storage.
You can do this by selecting [Settings] > [System Storage Management].
If you receive the above message delete game data to free up HDD space.
Any questions please ask.
SFZ

No I'm starting to think it may be the actual HDD I've since initialized the system removed the USB attempted to sign in tells me I need to update it. Downloads the update, attempts to install the update and the same error occurs. I've ordered a new SSHybrid drive 1TB. Good thing I had not played much on it as yet. Did not have much save data on it, but quite ***** that this has happened. Something must have occured between the 2.51 update to 2.55 that must have fragged the HDD.

PS4 System software v 2.55 is now available

Please help. My friend on psn by the gamer tag of OMG_LoKi has been banned and claims he doesn't know the cause. I play with him but do not violate anything in the game world, meaning we don't mod or hack. He said after this update, when he tries to sign in it says he is either banned or temporarily suspended. This is my best friend and the only one I really talk to, so please help him get his account back online. Also, it states that there is no error code.

Hi guys,
PS4 system software version 2.55 is now available. This is a mandatory update that must be done to connect to the PlayStation Network.
To update the system software via your PS4 system go to Settings > System Software Update > Install.
The update will be available to download via USB from the PlayStation website later today.
If you experience any issues updating the system software please follow the steps to 'perform a new installation of the system software' from the system software page.
Main features in version 2.55 update:
System software stability during use of some features has been improved.
Any questions please ask.
SFZ

I just updated my system software 10.6.8 and now preview cannot open my own PDFs

I just updated my system software 10.6.8 and now preview cannot open my own PDFs. Any ideas?

Before and after doign a system software update or upgrade Repair Disk Permissions in Disk Utility. You can find DU in Applications-Utilities-Disk Utilties. Run in 2x back to back.

THRiVE system software 3.2.1.31.5.0002 update released (Android 3.2)

We are pleased to announce a new software update for your THRiVE tablet. This release will update the Android platform from version 3.1 to 3.2, adding new features and performance enhancements. Toshiba recommends that you download and install this update.
Release 3.2.1.31.5.0002 highlights:
Enables an improved compatibility mode enhancing the way applications originally designed for smaller screen devices appear and function on the larger tablet display.
Improves screen rotation acceleration.
Adds extended screen support API, giving developers more precise control over the user interface across a range of Android-powered devices.
See http://kb.toshiba.com/98083841 for more details about THRiVE software updates.
You can update your system software by either of the following methods:
Tap on the update message sent by the Toshiba Service Station application to your device, or...
From the Home screen tap on the 'Apps' icon in the upper right corner, locate and tap the 'Service Station' app's icon, tap 'Check for Updates' and follow the on screen directions.

Updated my AT105 last night. Sat with it during the process and eveything seemed to work fine. Downloaded local newspaper like I do every morning and off to work it went. At work, I sync my documents with Docs to Go. Here is where my problems start.Apparently the upgrade broke my docs to go licence link as the desktop app states I need to upgrade to v3.0 and buy the licence. I'm already at v3.0 and have the valid licence that worked all the way up to today. I also noticed that today when I view my device on my computer, the tree now shows my SD card and any USB memory as a separate device. OK I guess. What is not OK is the internal storage of my TT is now displayed with two identically named folders for every folder on my device. Only difference is each and every duplicate shows it was last modified exactly 1 hour before the original and the files in the duplicate cannot be accessed. I have also noticed that the content between the duplicate and the original is for the most part identical. Some folders are not identical. This is only showing up on my desktop, not on my TT. This is the first upgrade I've had a problem with. I'd like the folder issue cleared up.

Thrive system software updates, February 2012

There is a new software update available for your Thrive™ tablet. This update optimizes functionality on select utilities and applications from Toshiba and Google. Toshiba recommends you download and install this update.
Release highlights:
• Includes updates to Google Mobile Services applications.
• Improves performance capabilities of the Toshiba File Manager application when connecting to external storage devices.
• Corrects errors in the Calculator utility, specifically for some European languages.
The release number for this update depends on the tablet model and type, as follows:
Thrive 10"
3.2.1.31.5.0003
3.2.1.38.5.0003 (Spanish models)
3.2.1.21.5.0009 (4G models)
Thrive 7"
3.2.1.31.5.0008
You can update your system software by any of the following methods:
• Tap on the update message sent by the Toshiba Service Station application to your device, or:
• From the Home screen, tap on the “Apps” icon in the upper right corner. Locate the “Service Station” icon and application. Tap “Check for Updates” and follow the steps.
You will be unable to use your tablet for the duration of the install, which is expected to take a few minutes. The software updates automatically, and your tablet will power off and on as part of this update. It is recommended that you remove all devices from the USB port and the SD Card slot before initiating this update. Your tablet must be plugged in to a power source in order to complete this installation.
If you have previously installed the Google+ app on your tablet, please refer to the following support bulletin prior to initiating this update at: Error Using the Google+ Application.

I can't get the latest image update to download. Keeps telling me to check my internet connection, but it is fine. Any ideas? I also have this problem.

Updated ipod touch to software version 51.1 and now won't install certain apps

updated ipod touch 4th gen with software version 5.1.1 and now won't install purchased apps family guy time warp and uncensored. Help please as now i can't use my purchased games.

What happens if you just restore to factory defaults/new iPod (not from backup)?
If you still have the problem that indicates a hardware problem an an appointment at the Genius Bar of an Apple store is in order.

[Update: Version 0.0.2 now available]Noteo - system tray notifications

After being frustrated with the lack of non-gnome-dependant system tray 'widgets' for things like email and battery monitoring, I decided to have a bash at creating my own, initially only to notify me of system updates, but I realised that I could use the same place to display other things.
Main changes: plugins can now be installed system wide as well as locally, meaning modules can be packaged in the AUR.
Configuration files are now in ~/.config/noteo/ which is much tidier.
Coming soon:
Module which replaces notification daemon - I just need to tidy up the code and package it.
Update: 0.0.2 now available
Version 0.0.2 is in the AUR: http://aur.archlinux.org/packages.php?ID=15952
some plugins are also in the AUR:
http://aur.archlinux.org/packages.php?ID=16032
http://aur.archlinux.org/packages.php?ID=16033
http://aur.archlinux.org/packages.php?ID=16034
or can be downloaded from sourceforge
http://sourceforge.net/project/showfile … _id=268802
As you can see in the status bar, when a 'module' want to tell you something, it flashes an icon in the system tray. If there is only one module wanting your attention, it flashes for about 10 seconds, then just displays that icon.
When there is more than one module wanting your attention, it switches to a generic icon. Hovering over the icon will describe which modules are attempting to notify you
If there is only one module active, clicking on the icon will bring up that module's dialog, if there is more than one module active, you will be shown which modules are wanting your attention.
You can also usually bring up the module's dialog by right clicking on the icon and choosing the appropriate menu option:
New feature: module authors can add icons to the right click menu
Noteo by itself has almost no functionality - it acts as a framework into which modules can 'plug-in'. 'Modules' are simple to make, and I hope that some of you will write some/improve mine.
To configure the modules, edit the module configuration files which will be generated on first run and placed in ~/.config/noteo/
Hope this is of some use to someone.
For those wanting to make new 'modules', maybe take a look at the source to the GmailCheck module, which is hopefully quite self-explanatory.
Last edited by bavardage (2008-03-30 09:14:15)

New alerts do not appear on the screen. The 'windows' in the screenshot are what appears when you click on the icon and a module wants your attention. New alerts cause the icon in the tray to change to whatever that module specifies e.g. on low battery, the 'BatteryStatus' module shows your icon theme's battery-critical icon (flashing initially and then becoming static - if there is more that one module wanting your attention, a generic icon is then shown)
Edit: actually the battery module does display a dialog box when the battery is critical, asking the user whether they want to hibernate or not, however this can be turned off. Noteo itself does not display dialogs, the modules can if they so desire. In future releases I do plan to implement something like libnotify notifications which the user can choose to activate. Also I am coding a module for noteo which can replace notification daemon.
Last edited by bavardage (2008-03-31 16:52:54)

Blackberry Desktop Software Version 6.1.036 now receiving Connector Specific Error when sync Calendar

I have a Blackberry Bold 9930 that has software version 7.1 bundle 457 and my desktop software is listed above, today when I tried to sync my calendar it is giving me the error Connector Specific Error, and won't sync. What am I doing wrong? Thank you!

I have the same problem and have tried one way sync's, deleting and re-entering the calendar entries made around the time the problem started. If it is a corrupted entry, I can't find it.

ANN: ADDT version 1.0.1 now available for download

Hi Folks,
as just discovered by Rob, the long awaited "DW CS4 compatible" ADDT version 1.0.1 is now available for download here:
http://www.adobe.com/support/dreamweaver/addt/downloads_updaters.html
Hint: don´t miss to read the release notes which summarize the issues resolved with the 1.0.1 update :: http://www.adobe.com/support/documentation/en/dreamweaver/addt/1_0_1/releasenotes.html
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Hi Guenter
Just so you know. You should remove the download trial link from the official addt page on this site. It is there for download, but nothing happens. I was expecting a notification as promised on email, when addt was released. But no such email.
I have after a total reinstall of all my system MAC OSX 10.5.6 finally succeeded in installing all of Design Premium CS4. (Shame on adobe for making this such a hastle!!!).
But when i install ADDT 1.0.1 downloaded today it appears in my extensionmanager, but nowhere to be found in DW CS4. I have restarted DW before checking and all seems to appear ok in Extension Manager.
What could this be and are others having same issues
Atb Sofus

Linksys X3000 New Firmware Annex A/B Version 1.0.05 Now Available

Just a heads up for the X3000 peoples...now available at Linksys.

Well I've taken the plunge and installed the new firmware. Seems OK in the first stages of use (sync actually up this morning from 18600 to 18800).
I see a fault I reported where the router is reporting the wrong DNS servers in 'Status' is still there though. I have my DNS servers set to OpenDNS and Google (and a quick ipconfig shows they ARE set). However in 'Status' the ISP's are still reported!
1.0.03 was mega stable on my line here and would run for weeks without dropping the connection so 1.0.05 has a lot to live up to!

Airport software version 5 for Windows not available for download?

Hi, Apple.
You're kidding, right?
I can download the Airport 5 update for Windows, but that update won't run if AirPort 5 isn't already installed.
Where am I supposed to get it in the first place? My laptop is very tiny, it doesn't have a CD-ROM drive.
Don't bother replying to this.. By the time you read this message I will have already popped the CD in my Linux machine and copied the files over via SSH. Then I'll run the update.
In the future, please make things easier for me.
Furthermore, how about you update the Airport (N) itself so that it will add local machine's hostnames to the embedded DNS server? I mean, heck, you already have features that let me reserve IPs based on MAC address or DHCP client ID... Those machines in the least should be easy to resolve.
Cheers,
--Dave Loyall

I suspect that Apple wants us to buy the Airport Extreme, or replace our Airport Expresses with Apple TVs. The AX is a wireless G/B product, and the new draft is N ... which is better for streaming larger media files.
Anyway, you can try this for a Windows system:
1. You will need a program called Less_MSIerables. Google it.
2. Download it to your desktop and unzip that file (it should end up in your unzipped file folder)
3. Now, download Airport Extreme software.
4. Run
5. A window will open that states "This Update requires AirPort Version 5.0 to be Installed".
Don't exit from this window.
6. <Vista> Instead, go Start ->start search and type in %temp%. Enter. <XP: use Run instead of Search and type in %temp%. Enter.>
7. You will see a file folder called something like IXP050.TMP (the number varies)
8. Open it.
9. You should be able to see a file called APsetup.msi.
10. Click your mouse on it, but don't open it.
11. At the top of the window you will see the address of this file. If not, click the yellow file folder in the address bar. Copy that address.
12. Next go to the folder in which you saved the unzipped version of Less_MSIerables
13. In a subfolder you will see a file called Lessmsi.
14. Right-click on this file
<Vista Only>
15. Go to properties.
16. Go to compatability.
17. Run in XP Mode
18. Apply
19. OK
20. Again right-click on icon.
21. Run as administrator.
<Vista and XP>
22. In the window that pops up, paste the address of Apsetup.msi
23. You will see a list of many files, but one of the first will be APUtil.exe.
24. Extract this file to a location that you can easily find.
25. A file folder will appear with a name like cab#APSetup.cab1
26. Open that file folder and you will see a file APUtil.exe
27. Click on that file, and the admin utility will open. You should be able to find your airport device.
I suggest that you move this file to your desktop for easy access.
If you are doing this for an Apple computer, there are posts on how to do it; and I think it is a good deal simpler to do.
Peace out.

Mobile version of the forum now available!

I am happy to tell you that we have just launched a mobile-friendly version of this forum!
It works automatically by detecting your device and browser, so just visit www.nokia.com/discussions (or any local Nokia site's forum url) on your phone, and you should get this lighter and faster version.
You can use all main forum functionalities: register and login, browse all topics, start new ones and reply. You can create your own mobile signature that's only shown to other mobile users.
This is our first version and we haven't tested it with every Nokia model, so please tell us what you think - do you like it, is something not working, what would you like to see added in the future..?
EDIT - Seems like we just found our first bug - for some odd reason some of the text was displayed white on a white background, so some of the posts were unreadable.
We're working on this, and I've just switched off the mobile view for a while.
I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

phonehacker wrote:
i've also tested the mobile version of the site on my N82.. it seems nice but when i login, it directs me for a little to the full version of the site and then automatically to the mobile version.
We've noticed the same - it seems that the Nokia site's header is loaded before the browser is detected and the mobile version is switched on. I hope we can do something about this.
I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

I synced my iPhone which stated a new version of iTunes was now available 11.1.4 so I disconnected the phone and follwed the download instructions - now I get the "MSVCR80.dll is missing from my computer. I have Windows Vista. What to do?

What is the solution for the "MSVCR80.dll" is no longer found in your computer when you are instructed to download and install iTuner 11.1.4?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99336)

New FMS release version 4.5.3 now available

We have released FMS 4.5.3. Please download from updaters page
http://www.adobe.com/support/flashmediaserver/downloads_updaters.html
Release notes for this release are available here
http://www.adobe.com/support/documentation/en/flashmediaserver/releasenotes.html
Thanks
Team Adobe Media Server

Asa,
Please see my post http://forums.adobe.com/thread/552055 regarding FMS 3.5.3.

THRiVE system software version 1.5.0029 now available

Similar Messages

Maybe you are looking for