Throttling policy not working on Exchange 2013 CU6

Hi,
We have a test throttling policy to restrict a mailbox to send at most 2 messages
per minute in our live Exchange 2013 CU6 enviroment. It was associated to a test mailbox. We have separated installed 2 mailboxe and 2 cas server roles in our enviroment. I have checked latest CU-s (7 & 8) but these are
not fixing any related bugs.
We tried lots of workaround (see below list) and solutions to fix this but it is still not working with outlook MAPI and OWA client.
Throttling policy not working
smtp service restart
RPC Client Acces service restart
The policy details:
Get-ThrottlingPolicy  low_rate_limit |fl *limit*
MessageRateLimit   : 2
RecipientRateLimit : 1000
Get-mailbox [email protected] | fl ThrottlingPolicy
ThrottlingPolicy           : low_rate_limit
Do you have any idea what is the problem?
Thank you in advance.
br,
Zoltan

Hi Zoltan,
Base on my research, you need to configure the MessageRateLimit parameter on receive connector also.
The MessageRateLimit parameter specifies the maximum number of messages that can be sent by a single client IP address per minute. The default value for a Receive connector configured in the Transport service on a Mailbox server is
unlimited. The default value for a Receive connector configured on an Edge server is 600 messages per minute. The valid input range for this parameter is 1 to 2147483647. To remove the message rate limit on a Receive connector, enter a value of
unlimited.
https://technet.microsoft.com/en-us/library/bb125140(v=exchg.150).aspx
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Similar Messages

  • Search-MailboxAuditLog is empty - Mailbox Audit Logging not working in Exchange 2013 CU6 environment

    Hello,
    i activated Mailbox Audit Logging for Admin, delegate and owner with all supported operations (update, delete, etc..)
    like mentioned here:
    http://exchangeserverpro.com/using-exchange-server-2013-mailbox-audit-logging/
    But also two days later (and also one Server reboot later) search-MailboxAuditLog is still empty.
    any ideas how to fix this?
    Best,
    martin

    Hi S.Nithyanandham,
    i looked up the mailboxfolderstatistics. There are items in the folder: 
    [PS] C:\Windows\system32>Get-MailboxFolderStatistics mailboxname |where{$_.Name -like "*audit*"}
    RunspaceId : a95e32b8-93c3-4330-8d42-45cade9d64d4
    Date : 18.09.2014 16:35:20
    Name : Audits
    FolderPath : /Audits
    FolderId : LgAAAADmBpGVdb8iQp3F89WOcmcHAQBpQNFODkTESLeLj74B887wAAAAAAESAAAB
    FolderType : Audits
    ItemsInFolder : 147
    DeletedItemsInFolder : 0
    FolderSize : 434.2 KB (444,649 bytes)
    ItemsInFolderAndSubfolders : 147
    DeletedItemsInFolderAndSubfolders : 0
    FolderAndSubfolderSize : 434.2 KB (444,649 bytes)
    OldestItemReceivedDate :
    NewestItemReceivedDate :
    OldestDeletedItemReceivedDate :
    NewestDeletedItemReceivedDate :
    OldestItemLastModifiedDate :
    NewestItemLastModifiedDate :
    OldestDeletedItemLastModifiedDate :
    NewestDeletedItemLastModifiedDate :
    ManagedFolder :
    DeletePolicy :
    ArchivePolicy :
    TopSubject :
    TopSubjectSize : 0 B (0 bytes)
    TopSubjectCount : 0
    TopSubjectClass :
    TopSubjectPath :
    TopSubjectReceivedTime :
    TopSubjectFrom :
    TopClientInfoForSubject :
    TopClientInfoCountForSubject : 0
    SearchFolders :
    Identity : mailboxname\Audits
    IsValid : True
    ObjectState : New
    What do you think?
    why cant i search and find these entries the auditlog?
    best, 
    martin

  • SME 7.1 not working with Exchange 2013 SP1 CU6

    Hello, i tried upgrading to SME 7.1 on our Exchange 2013 SP1 CU6, but when trying to configure the Exchange Server in the SME management console using the configuration wizard, it gave an error before the LUN mapping page, saying "Failed to get Exchange information for server" and "The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state.". I upgraded Snapdrive to 7.1, verfied all credentials according to the manuals, re-installed and rebooted multiple times (registry and filesystem cleaned, even tried to rename the existing SnapInfo directory, ...), stopped all other services on the server but without any change... Every time when trying to run the configuration wizard, the debug log shows no errors, lists all Exchange information and ends with the following lines:[11/18 12:51:58 155] Exit CSmeCDOExm::GetExchangeStructureInternal 0x0
    [11/18 12:51:58 155] Exit CNtapSnapMgr::GetExchangeStructure: 0x0
    [11/18 12:51:58 233] Enter CSmeServerBase::~CSmeServerBase ...
    [11/18 12:51:58 248] m_ptrSnapShot released
    [11/18 12:51:58 248] m_pISnapShot4 released
    [11/18 12:51:58 248] m_pISnapShot5 released
    [11/18 12:51:58 248] m_pISnapShot6 released
    [11/18 12:51:58 248] m_pISnapShot7 released
    [11/18 12:51:58 248] m_pISnapShot8 released
    [11/18 12:51:58 248] m_pISnapShot9 released I ended up uninstalling SME 7.1 and re-installed SME 7.0 which is working. Exchange Server: ESXi 5.5 VM, Windows Server 2012 R2 (with current patches), Exchange 2013 SP1 CU6 - no DAG, single server installation (in co-existence with Exchange 2010), 4 iSCSI LUNs created with Snapdrive (1x Log, 3x Store), System drive and Exchange installation drive on vmdk Disks (via ESXi -> NFS store on the same NetApp)NetApp: FAS 2240-2 with Data ONTAP 8.1.4P1 7-mode (with complete license bundle) Anyone else got this problem or even better - a solution? 

    We could not reproduce the error with the upgrade workflow.Looking at the error and the relevant function, we could force the problem in following conditions: -SME is configured or ran at the DAG level-one of the following services is stopped or not responding on one nodes of the DAG Snapdrive Service, Snapmanager Service, Snapdrive Storage Management Service,Snapdrive Management Service. Would be good if we could get the output of following powershell cmdlet before and after the upgrade: Get-Service –ComputerName Node1, Node2, Node3 –name Snap*, SDMGMT*, SWSvc  Best regards,Dan 

  • RBL not working on Exchange 2013 Edge Transport

    Single multi-role server with a couple of mailboxes, recently added an Edge Transport server. After configuring the Edge Subscribtion I added sen.spamhaus.org as a RBL Provider:
    Add-IPBlockListProvider -Name Spamhaus -LookupDomain zen.spamhaus.org
    This is not working. A lot of spam is still entering Exchange and the http://www.crynwr.com/spam/ test failed.
    Both servers run Exchange 2013 CU5.
    Did my post help? Please use "Vote As Helpful", "Mark as answer" or "Propose as answer". Thank you!

    Hi,
    Yes, the command is specific for provider SpamHaus.
    http://tweaks.com/windows/40003/cut-down-on-spam-with-ip-block-list-providers-rbl/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
    or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Have you added the additional parameters in the command and did it work?
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • POP3 is not working in Exchange 2013

    Hi,
    Facing Wiered issue in Exchange 2013, POP3 is not working ... When configuring POP3 in outlook it failed to authenticate.
    unknown user name or bad password. [Error=ProxyNotAuthenticated Proxy=ZAJNBEXC03.cws.sasol.com:1995:SSL]"
    Amit

    Credentials are correct
    Here is the output ..... pls. let me know if this is correct
    [PS] C:\Windows\system32>Get-PopSettings |fl
    RunspaceId                        : ecc593c8-067e-4d9d-aca1-c121295b8499
    Name                              : 1
    ProtocolName                      : POP3
    MaxCommandSize                    : 512
    MessageRetrievalSortOrder         : Ascending
    UnencryptedOrTLSBindings          : {[::]:110, 0.0.0.0:110}
    SSLBindings                       : {[::]:995, 0.0.0.0:995}
    InternalConnectionSettings        : {ZAJNBEXC02.cws.sasol.com:995:SSL, ZAJNBEXC02.cws.sasol.com:110:TLS}
    ExternalConnectionSettings        : {ZAJNBEXC02.cws.sasol.com:995:SSL}
    X509CertificateName               : mail.sasol.com
    Banner                            : The Microsoft Exchange POP3 service is ready on ZAJNBEXC02.
    LoginType                         : PlainTextLogin
    AuthenticatedConnectionTimeout    : 00:30:00
    PreAuthenticatedConnectionTimeout : 00:01:00
    MaxConnections                    : 2147483647
    MaxConnectionFromSingleIP         : 2147483647
    MaxConnectionsPerUser             : 16
    MessageRetrievalMimeFormat        : BestBodyFormat
    ProxyTargetPort                   : 1995
    CalendarItemRetrievalOption       : iCalendar
    OwaServerUrl                      :
    EnableExactRFC822Size             : False
    LiveIdBasicAuthReplacement        : False
    SuppressReadReceipt               : False
    ProtocolLogEnabled                : True
    EnforceCertificateErrors          : False
    LogFileLocation                   : D:\Program Files\Microsoft\Exchange Server\V15\Logging\Pop3
    LogFileRollOverSettings           : Daily
    LogPerFileSizeQuota               : 0 B (0 bytes)
    ExtendedProtectionPolicy          : None
    EnableGSSAPIAndNTLMAuth           : True
    Server                            : ZAJNBEXC02
    AdminDisplayName                  :
    ExchangeVersion                   : 0.10 (14.0.100.0)
    DistinguishedName                 : CN=1,CN=POP3,CN=Protocols,CN=ZAJNBEXC02,CN=Servers,CN=Exchange Administrative
                                        Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=Sasol,CN=Microsoft
                                        Exchange,CN=Services,CN=Configuration,DC=cws,DC=sasol,DC=com
    Identity                          : ZAJNBEXC02\1
    Guid                              : 4c5d5409-1b4a-4127-a4cd-11b064156322
    ObjectCategory                    : cws.sasol.com/Configuration/Schema/ms-Exch-Protocol-Cfg-POP-Server
    ObjectClass                       : {top, protocolCfg, protocolCfgPOP, protocolCfgPOPServer}
    WhenChanged                       : 2015-02-24 08:57:41 AM
    WhenCreated                       : 2014-12-08 11:25:29 AM
    WhenChangedUTC                    : 2015-02-24 06:57:41 AM
    WhenCreatedUTC                    : 2014-12-08 09:25:29 AM
    OrganizationId                    :
    OriginatingServer                 : ZAJNBWCWSFGC001.cws.sasol.com
    IsValid                           : True
    ObjectState                       : Unchanged
    ==================================================================
    In my case I have 4 DAG and each having 3 server. .. I am POP test and it is failing with below error
    RunspaceId                  : 75d8800c-3f32-4750-8fe1-940133eaf6e8
    LocalSite                   : AFR-BYN
    SecureAccess                : True
    VirtualDirectoryName        :
    Url                         :
    UrlType                     : Unknown
    Port                        : 0
    ConnectionType              : Plaintext
    ClientAccessServerShortName : ZAJNBEXC01
    LocalSiteShortName          : AFR-BYN
    ClientAccessServer          : ZAJNBEXC01.cws.sasol.com
    Scenario                    : Create a MailboxSession object.
    ScenarioDescription         : Creating MailboxSession object to access the mailbox [[email protected]].
    PerformanceCounterName      :
    Result                      : Failure
    Error                       : Unable to create MailboxSession object to access the mailbox [[email protected]].
                                  Detailed error information:
                                  [Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are
    in different Active Directory sites. Inner error [Microsoft.Mapi.Ma
    UserName                    : migrationtest3
    StartTime                   : 2015-02-24 10:58:51 AM
    Latency                     : -00:00:00.0010000
    EventType                   : Error
    LatencyInMillisecondsString :
    Identity                    :
    IsValid                     : True
    ObjectState                 : New
    Amit

  • Redirect emails in OWA and Outlook 2010 not working in Exchange 2013

    I have an new install of Exchange 2013 with all updates.
    When I setup an inbox rule to redirect messages to another contact it is not working.
    When I used Outlook 2010 and ran the rule manually I received this error:
    "the redirect action is not currently supported with run rules now"
    It seems that I didn't setup up something correctly in Exchange 2013 or a feature is not turned on. Please assist.
    In the EM console when I setup forwarding that is working. Its the inbox rule redirect not working.

    Hi,
    From your description, I recommend you use the following cmdlet to ensure that the DeliverToMailboxAndForward parameter is set to $True.
    Get-Mailbox <identity> | fl DeliverToMailboxandForward
    If this parameter is false, you can use the Set-Mailbox cmdlet to set it and check the result.
    Hope this can be helpful to you.
    Best regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Amy Wang
    TechNet Community Support

  • AutoReplyState is Enabled. But still OOF is not working on exchange 2013

    Hi All,
     We have exchange 2013 installed. How can I make our OOF (Out of Office) reply works?
    Thanks in advance.
    Jake

    Hi Sneff,
     Sorry, but I can't find anything on my event viewer that is "MSExchangeMailboxAssistants". Do i need to start the "Microsoft Account Sign-in Assistant" in services?
    Checking oof with
    https://testconnectivity.microsoft.com/. I got lots of "x". Please give some advice : 
    Exchange Web Services synchronization, notification, availability, and Automatic Replies.
    Not all tests of Exchange Web Services tasks completed.
    Additional Details
    Elapsed Time: 42852 ms.
    Test Steps
    The Microsoft Connectivity Analyzer is attempting to test Autodiscover for blank.com.ph.
    Testing Autodiscover failed.
    Additional Details
    Elapsed Time: 42852 ms.
    Test Steps
    Attempting each method of contacting the Autodiscover service.
    The Autodiscover service couldn't be contacted successfully by any method.
    Additional Details
    Elapsed Time: 42852 ms.
    Test Steps
    Attempting to test potential Autodiscover URL https://blank.com.ph:443/Autodiscover/Autodiscover.xml
    Testing of this potential Autodiscover URL failed.
    Additional Details
    Test Steps
    Attempting to test potential Autodiscover URL https://autodiscover.blank.com.ph:443/Autodiscover/Autodiscover.xml
    Testing of this potential Autodiscover URL failed.
    Additional Details
    Elapsed Time: 21299 ms.
    Test Steps
    Attempting to resolve the host name autodiscover.blank.com.ph in DNS.
    The host name resolved successfully.
    Additional Details
    Testing TCP port 443 on host autodiscover.blank.com.ph to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
     <label for="testSelectWizard_ctl12_ctl06_ctl00_ctl00_ctl01_ctl01_tmmArrow">Tell
    me more about this issue and how to resolve it</label>
    Additional Details
    Attempting to contact the Autodiscover service using the HTTP redirect method.
    The attempt to contact Autodiscover using the HTTP Redirect method failed.
    Additional Details
    Test Steps
    Attempting to contact the Autodiscover service using the DNS SRV redirect method.
    The Microsoft Connectivity Analyzer failed to contact the Autodiscover service using the DNS SRV redirect method.
    Additional Details
    Test Steps
    Checking if there is an autodiscover CNAME record in DNS for your domain 'blank.com.ph' for Office 365.
    Failed to validate autodiscover CNAME record in DNS. If your mailbox isn't in Office 365, you can ignore this warning.
     <label for="testSelectWizard_ctl12_ctl06_ctl00_ctl00_ctl04_tmmArrow">Tell
    me more about this issue and how to resolve it</label>
    Additional Details
    There is no Autodiscover CNAME record for your domain 'blank.com.ph'.
    Elapsed Time: 24 ms.
    Thanks
    Jake

  • Lync integration not working after Exchange 2013 SP1 is installed...

    Hi,
    I have two Exchange 2013 servers running and everything is fine, almost.
    The problem is that on the first server we had OWA with Lync integration working before installing SP1, but after the installation of SP1, it doesn't Work any more.
    The second server was installed with SP1 from the start, but we can't get the Lync integration to Work on this one either..
    When we log in to OWA, it just starts to sign in but then says "there was a problem signing in, if this continues please contact your helpdesk"
    I have checked the Exchange server for events, and i can see the event ID 112 everytime i recycle the Application Pool, so there are some connection between Exchange and Lync..
    Have any of you Guys seen or experienced any thing like this?
    Thanks in advance.
    Regards
    Kenneth

    Hi,
    I recommend that you refer to the following article to troubleshoot the issue:
    Troubleshooting tips for Exchange 2013 OWA IM Integration to Lync 2013
    This post describes how to configure Exchange 2013 OWA to have IM integration to Lync 2013. Here I would like to give some troubleshooting tips in case you can't get the integration to work.
    In addition, here is a similar thread for your reference:
    Lync 2013 with Exchange 2013 SP1 OWA integration failed   
    Hope this helps!
    Thanks.                              
    Niko Cheng
    TechNet Community Support

  • Moderation Mail Not Work in Exchange 2013

    Hello All,
    I facing difficulties regarding Moderation Mail. The Moderation mail not send to moderator. also i found that the arbitration mailbox also corrupted.
    Error:
    WARNING: The object abc.com/Users/Migration.8f3e7716-2011-43e4-96b1-aba62d229136 has been corrupted, and
    it's in an inconsistent state. The following validation errors happened:
    WARNING: Database is mandatory on UserMailbox.
    WARNING: Database is mandatory on UserMailbox.
    Please suggest

    Hi,
    To recreate this arbitration mailbox, you can follow the steps below.
    Start the Active Directory Users and Computers snap-in.
    Click Users, and then find the following account:
    Migration.8f3e7716-2011-43e4-96b1-aba62d229136
    Remove this account.
    Run the following cmdlet:
    setup /preparead/IAcceptExchangeServerLicenseTerms
    Run the following cmdlets:
    Enable-Mailbox -Arbitration -Identity "Migration.8f3e7716-2011-43e4-96b1-aba62d229136"
    Set-Mailbox "Migration.8f3e7716-2011-43e4-96b1-aba62d229136" -Arbitration –Management:$true
    Here is an article about re-creating the Discovery system mailbox, it is the same process to recreate the arbitration mailbox mentioned in the error message above.
    http://technet.microsoft.com/en-gb/library/gg588318(v=exchg.150).aspx
    Best regards,
    Belinda Ma
    TechNet Community Support

  • Cannot edit/create new mailbox in ECP - Exchange 2013 CU6

    Hello, I am currently running Exchange 2013 CU6. I cannot perform tasks related to recipients such as edit/create new mailbox. Additionally I cannot view the properties of the virtual directories.
    I tried multiple browsers (Chrome, Firefox, IE) in different PCs and the result is the same
    For example, I cannot click "Browse" in "new user mailbox" tab
    "New local Mailbox move" page displays blank
    I browsed through the event logs and found the following errors (Event 4 and Event 21):
    Event 4
    Current user: 'Unauthenticated'
    Request for URL 'https://mailserver.address..com:444/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US(https://mailserver.address..capcx.com/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US)'
    failed with the following error:
    Microsoft.Exchange.Management.ControlPanel.BadRequestException:
    The request sent by your browser was not valid. ---> Microsoft.Exchange.Management.ControlPanel.BadRequestException: The request sent by your browser was not valid. --->
    System.Exception: 'ToolkitScriptManager' could not generate combined script resources file.
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
       at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
       at
    System.Web.HttpApplication.ExecuteStep(IExecutionStepstep, Boolean&
    completedSynchronously)
       at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
       at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
       at
    System.Web.HttpApplication.ExecuteStep(IExecutionStepstep, Boolean&
    completedSynchronously)
    Microsoft.Exchange.Management.ControlPanel.BadRequestException:
    The request sent by your browser was not valid. ---> System.Exception: 'ToolkitScriptManager' could not generate combined script
    resources file.
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
       at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
    System.Exception: 'ToolkitScriptManager'
    could not generate combined script resources file.
    Flight info: Features:[[Global.DistributedKeyManagement, False],[Global.GlobalCriminalCompliance,
    False],[Global.MultiTenancy, False],[Global.WindowsLiveID, False],[Eac.AllowMailboxArchiveOnlyMigration,
    True],[Eac.AllowRemoteOnboardingMovesOnly, False],[Eac.BulkPermissionAddRemove, True],[Eac.CmdletLogging,
    True],[Eac.CrossPremiseMigration, False],[Eac.DiscoveryDocIdHint, False],[Eac.DiscoveryPFSearch,
    False],[Eac.DiscoverySearchStats, False],[Eac.DlpFingerprint, False],[Eac.EACClientAccessRulesEnabled,
    False],[Eac.GeminiShell, False],[Eac.ManageMailboxAuditing, False],[Eac.ModernGroups,
    False],[Eac.Office365DIcon, False],[Eac.RemoteDomain, False],[Eac.UCCAuditReports, False],[Eac.UCCPermissions,
    False],[Eac.UnifiedComplianceCenter, False],[Eac.UnifiedPolicy, False],[Eac.UnlistedServices,
    False],],  Flights:[],  Constraints:[[MACHINE, SERVER-NAME],[MODE, ENTERPRISE],[PROCESS, W3WP],],
    IsGlobalSnapshot: True
    Event 21
    Current user: 'Unauthenticated'
    Script request for URL 'https://mailserver.address.com:444/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US(https://mailserver.address.com/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US)'
    failed with the following error:
    Microsoft.Exchange.Management.ControlPanel.BadRequestException:
    The request sent by your browser was not valid. ---> System.Exception: 'ToolkitScriptManager' could not generate combined script
    resources file.
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
       at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
    System.Exception: 'ToolkitScriptManager'
    could not generate combined script resources file.
    Flight info: Features:[[Global.DistributedKeyManagement, False],[Global.GlobalCriminalCompliance,
    False],[Global.MultiTenancy, False],[Global.WindowsLiveID, False],[Eac.AllowMailboxArchiveOnlyMigration,
    True],[Eac.AllowRemoteOnboardingMovesOnly, False],[Eac.BulkPermissionAddRemove, True],[Eac.CmdletLogging,
    True],[Eac.CrossPremiseMigration, False],[Eac.DiscoveryDocIdHint, False],[Eac.DiscoveryPFSearch,
    False],[Eac.DiscoverySearchStats, False],[Eac.DlpFingerprint, False],[Eac.EACClientAccessRulesEnabled,
    False],[Eac.GeminiShell, False],[Eac.ManageMailboxAuditing, False],[Eac.ModernGroups,
    False],[Eac.Office365DIcon, False],[Eac.RemoteDomain, False],[Eac.UCCAuditReports, False],[Eac.UCCPermissions,
    False],[Eac.UnifiedComplianceCenter, False],[Eac.UnifiedPolicy, False],[Eac.UnlistedServices,
    False],],  Flights:[],  Constraints:[[MACHINE, SERVER-NAME],[MODE, ENTERPRISE],[PROCESS, W3WP],],
    IsGlobalSnapshot: True
     Any help?

    Hello Amy,
    I will try to follow your suggestions. I will update once I get access to the server.
    Anyways, the whole thing was back to normal for 1 day on its own, but right now the issue is happening again. Permission-wise, the account I used is in listed Organization Management role
    Update: I forgot to try the EMS, but after I recycle the
    MSExchangeECPAppPool, everything works fine, except for viewing Groups and Permissions
    An error in the event viewer is displayed:
    Current user: 'Unauthenticated'
    Script request for URL 'https://address.com:444/ecp/15.0.995.28/scripts/js.axd?resources=EditRoleAssignmentPolicy&v=15.0.995.28&c=en-US(https://address.com/ecp/15.0.995.28/scripts/js.axd?resources=EditRoleAssignmentPolicy&v=15.0.995.28&c=en-US)'
    failed with the following error:
    Microsoft.Exchange.Management.ControlPanel.BadRequestException: The request sent by your browser was not valid. ---> System.Exception: 'ToolkitScriptManager' could not generate combined script resources file.
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
       at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
    System.Exception: 'ToolkitScriptManager' could not generate combined script resources file.
    Flight info: Features:[[Global.DistributedKeyManagement, False],[Global.GlobalCriminalCompliance, False],[Global.MultiTenancy, False],[Global.WindowsLiveID, False],[Eac.AllowMailboxArchiveOnlyMigration, True],[Eac.AllowRemoteOnboardingMovesOnly,
    False],[Eac.BulkPermissionAddRemove, True],[Eac.CmdletLogging, True],[Eac.CrossPremiseMigration, False],[Eac.DiscoveryDocIdHint, False],[Eac.DiscoveryPFSearch, False],[Eac.DiscoverySearchStats, False],[Eac.DlpFingerprint, False],[Eac.EACClientAccessRulesEnabled,
    False],[Eac.GeminiShell, False],[Eac.ManageMailboxAuditing, False],[Eac.ModernGroups, False],[Eac.Office365DIcon, False],[Eac.RemoteDomain, False],[Eac.UCCAuditReports, False],[Eac.UCCPermissions, False],[Eac.UnifiedComplianceCenter, False],[Eac.UnifiedPolicy,
    False],[Eac.UnlistedServices, False],],  Flights:[],  Constraints:[[MACHINE, SERVER-NAME],[MODE, ENTERPRISE],[PROCESS, W3WP],], IsGlobalSnapshot: True
    However, after a while, things are back to normal... I don't understand what's happening..

  • Cannot disable a mailbox in Exchange 2013 CU6!?!?!?!

    I cannot disable a mailbox in Exchange 2013 CU6. I get the following error:
    Anyone seen this error? As you know, I just want to remove the Exchange attributes from the user object in Active Directory. Of course, deleting the user object works just fine but don't want to go that route. 

    I tried with the EMS (Powershell) and I still get an error:
    [PS] C:\>disable-mailbox [email protected]
    Confirm
    Are you sure you want to perform this action?
    Disabling mailbox "[email protected]" will remove the Exchange properties from the Active Directory user object and mark the mailbox in the database for removal. If the mailbox has an archive or remote archive, the archive will also
    be 
    marked for removal. In the case of remote archives, this action is permanent. You can't reconnect this user to the remote archive again.
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [?] Help (default is "Y"): 
    Y
    Active Directory operation failed on LocalDCName.local.com. This error is not retriable. Additional information: The parameter is incorrect.
    Active directory response: 00000057: LdapErr: DSID-0C090CB9, comment: Error in attribute conversion operation, data 0, v2580
        + CategoryInfo          : NotSpecified: (:) [Disable-Mailbox], ADOperationException
        + FullyQualifiedErrorId : [Server=LA-MBX01Server,RequestId=6ed97c1e-ae68-4670-a097-c4e65f683274,TimeStamp=11/18/2014 7:50:07 PM] [FailureCategory=Cmdlet-ADOperationException] 8D6C0FEB,Microsoft.Exchange.Management.RecipientTasks.Disable 
       Mailbox
        + PSComputerName        : LocalDCName.local.com
    I captured everything with the START-TRANSCRIPT cmdlet and changed the specific values to our organization (i.e., "[email protected]" and "LocalDCName.Local.com"). I've tried this on other mailboxes and I receive the same error whether
    I use EMC or EMS. I believe this might be AD schema related just not sure where.

  • MS KB3011140 breaks information store in Exchange 2013 CU6

    Hello,
    Last night Microsoft KB 3011140 was inadvertently installed on our Exchange 2013 CU6 server.  I just want to warn everyone that you should be very cautious with this update.  Upon reboot, the information store would crash, recover, then crash and
    recover, infintly.  End user symptoms are the pop up bubble in the lower right regarding Outlook lost connectivity to Exchange server, then a few minutes later Outlook restored connectivity to Exchange, rinse and repeat.
    This constant up and down would cause many freezes and slowness in Outlook.  The last time we had this issue was when we went to CU6.  Microsoft tech support though free of charge installed a patch Exchange2013-KB2997209_2997847-x64.en.msp and
    that fixed our problem.  They left the patch for us, so I thought I would try to re-run this.  It progressed for awhile and then rolled back saying it encountered an unexpected error (what else is new?).
    So I removed KB 3011140 which took about 35 minutes to do and upon reboot Exchange is back up and running.
    The only side effect I am noticing today is Lync 2013 is asking for Exchange credentials and EWS Internal / EWS External URI's are not populated, however I have no issues reading my conversation history and calendar in Lync.  I need to reboot my machine
    yet but other people have started reporting the same thing.

    Hi KJSTech1,
    Thanks for your generous sharing and glad to know it works after recycling the MSExchangeServicesAppPool.
    It's really hard to say why the patch cause this issue, since I didn't find someothers has the same issue. Thanks for your reporting.
    Thanks
    Mavis Huang
    TechNet Community Support

  • Large ETLTraces files after Exchange 2013 CU6

    After installing Exchange 2013 CU6, you may notice the Exchange Drive is consumed a lot than before and the size is increasing rapidly. After troubleshooting, you may find everything is running properly and
    there is no issues with your Exchange Server.
    Then you need to check whether the files in the following location is the root cause:
    C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\Diagnostics\logfie
    C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\Diagnostics\ETLTraces
    (You may find log files like “DocumentProcessingTrace_XX.etl )
    Prior to CU6, there is not ETLTrace folder listed in this location and there are log folders however the log file has files no exceeding 7 MB size.
    Post upgrade, there comes the ETLTrace folder and the files in this folder are close to 50 MB and the log files folder have log files exceeding 50 MB size.
    This is a designed behavior in Exchange CU6, if you have limited hard drive space, as a workaround solution, we can safely remove or move the location of these lo files:
    Before doing the changes, please firstly stop the health monitoring service. To Change the Log File Path, the Registry Key value is:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Search Foundation for Exchange\Diagnostics
    To Change the ETLTrace path the registry Value is:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office Server\16.0\Search\Diagnostics\Tracing
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    @Simon_Wu, I tried your solution. However after a couple of days the logs were moved back to the original, default location. It looks like the server has a process which checks for hacks and undoes any attempts to change the path.
    Interestingly the altered Registry entries remained altered, however the files were switched back to the default location. It generates just over 1Gb of logs per day on a largely idling Exchange 2013 CU7 server with 350 mailboxes.
    Go figure!
    What I found to work consistently and reliably is to replace default folders with junction points to another folder on another drive.
    I also found that these files are created by a process which runs under the System process (PID 4), therefore you'll need to restart the server in Safe Mode to replace the default folders with junction points.

  • Exchange 2013 CU6 event id 1003

    Installed cu6, after that OWA and ECP stopped to work, with a redirection loop, when I check my eventlogs I see thousands of this error message:
    RpcHttp] An internal server error occurred. The unhandled exception was: System.MissingMethodException: Method not found: 'System.String Microsoft.Exchange.Security.Authentication.IIdentityExtensions.GetSafeName(System.Security.Principal.IIdentity)'.
       at Microsoft.Exchange.HttpProxy.ProxyModule.<>c__DisplayClasse.<OnEndRequest>b__d()
       at Microsoft.Exchange.Common.IL.ILUtil.DoTryFilterCatch(TryDelegate tryDelegate, FilterDelegate filterDelegate, CatchDelegate catchDelegate)
    Cant find a workaround, anyone else seen this error?

    Maybe this can help someone.
    v 
    Replaced SharedWebConfig files under the location "V15\FrontEnd\HttpProxy"
    v 
    Added the missing permission on Exchange Back End Web Site by comparing the same with our lab
    v 
    On IIS
    è Exchange Back End
    è Changed Physical Path
    è it to "V15\ClientAccess"
    v 
    Still after which we couldn’t browse OWA under Exchange Back End using Port 444 but found that ECP works fine
    v 
    Replaced the SharedWebConfig file from working Exchange 2013 CU6 under the location "V15\ClientAccess"
    v 
    Ran IISReset
    v 
    Confirmed that OWA and other virtual directories as well started working fine without any issues

  • Exchange 2013 CU6 migration batch

    Hello
    After install exchange 2013 cu6 server to root domain in multiple domain environment I cant move mailbox from exchange 2007 to new server because migration batch search mailbox only root domain controller. 
    ADTopology list all child domain dc without error.
    setup /ps and /pad run without error.
    but new-moverequest working.
    please help.
    Udvozlettel:Sneff Gabor

    Hi
    It might be a bug in the GUI as powershell is working. Did you also update exchange 2007 to its latest rollup?
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for

  • All Desktop Applications Uninstall, uncontrolled

    Ever since we upgraded our Zen Server to 6.5 SP2, we have encoutnered problems whereby sporadic users will have all of their applications uninstall. All Desktops are running the Management Agent 6.5 SP2 as well. It appears that what happens is when t

  • Flat file upload

    Hi when i m uploading a flat file in csv format, I m getting a problem. In the file field value is having (,) between the words Eg. Field Name :- Text Medium     Value      :- Bachelor of Sci,Computer Sci Value is having the , between the words so wh

  • JDK 1.5 Serialization Compatibility with assert()

    I have the following class: class xyz implements java.io.Serializable {    void doNothing() {       int x = 0;       assert x < 5; }If I compile it on both JDK 1.4 (with -source=1.4) and 1.5 (with -source=1.5) platforms, the serialVersion IDs are dif

  • Installed the update. Can't get internet. Anyone else with similar problems

    Can't get the wireless to work after uploading the update.

  • Unable to connect to Wi-fi on Ipad 2

    I cant connect to wi-fi on my ipad 2... Home computer is working fine, I have done a hard reboot of my ipad, i have reset network connections When i click on settings, wi-fi, it recognises my DLINK router but when i click on ">" next to it, it doesnt