Throwing error when Creating Info record

Hai,
When Creating Info record . I maintained standard Qty, Min qty ,price and Planned dely time .
It is not saving and there is an error message that "Maintian all entries in Reqt fields" and Cursor is blinking at Planned delytime . and Not saved/
Can any one solve my issue.
regards
Madhav

Hi madav ,
create inforecord me11
vender name
mat
purchase org
plant
maintain that and enter,
go to text maintain, then click on condition hear maintain as per as the requirement,
go back
click on purchase organization data then save
u will not get error .
hope it will help u .
thanks
BIswa

Similar Messages

Error when creating info record

Hi there:
When I am creating info record,and trying to enter 9.9 eur per kg,but the system popped up a error message and saying that enter a numeric value,what's wrong?

you may have to enter 9,9 instead of 9.9
This is base on the decimal setting in your user profile. you can adjust this in SU3 transaction yourself

Error material not maintained by purchasing when creating info record

Hi Expert,
I have an issue when creating info record, error says "Material ******* not maintained by purchasing". I've checked in MM03 purchasing view, all has been maintained and at the bottom there is message says "No plant-specific data exist". Accounting view also maintained. I've also checked in MARC table for this material and plant. It existed. I cannot see anything wrong on the material master setup but not sure why am i having this error...
Please help.
Thanks,

Hi,
Error says "Material ******* not maintained by purchasing" & you checked purchasing view has been maintained.
OK. Just cross check following optionS
Option-1: You creating info- record for material with combination of plant & vendor....check did the material have purchasing view for same plant-the info-record you are creating!
Option-2: If no purchasing view for material with same plant , just extend in t.code MM50 for E Purchasing
Option-3: Check the material for same plant, did Procurement type F (External procurement) is there
Option-4: Check Profit Center in Plantdata/ sto-2 view of material.
Regards,
Biju K

Siebel Error when creating new record

Hi,
We are getting the below error everytime we are trying to create a new reocrd in the Siebel WebClient Pharma8.0.
"A Record that contains identical values to the record you have created already exists. If you would like to enter a new record , please ensure that the field values are unique. (SBL-DAT-00381). "
Everytime I try to create a new Account or contact or new instance of a workflow I am getting this error.
Also this error only occurs when I login to client as 'server' , if I login as a 'local' it doesn not create any error while creating a new record.
Could this error be because of the Database or does it have to be with the Siebel Client Installation.
Please help if anybody has faced such an issue before.
Thanks :-)

Hi,
Turn on a level 4 log and you should be able to figure this out.
Robert Ponder
Lead Architect and Director
Ponder Pro Serve
cell: 770.490.2767
fax: 770.412.8259
email: [email protected]
web: www.ponderproserve.com

Error when creating inventory record

Hi All,
When I try to create an inventory record using Txn LX15 and batch input session I get the following error in the error log in the batch input session
"Number of allowed bins exceeded after storage bin P1-06A"
This error is for transaction LI01N as per the error log.
Has someone come across such an error? Is it related to number of stoarge bins allowed per inventory document?
Regards,
V S

Hi V S,
Maximum number of items on inventory document may be restricted. Please check your settings:
SPRO > LE > WM > Activities > Physical Inventory > Define Differences and Document Limits
Maybe field V_T3401-MINPS is empty for your WH and this causes your problem (L4063).
Thanks,
Swamy H P

JDeveloper throwing error when creating EO

Hi... I see this weird error thrown by JDeveloper when trying to create an Entity Object :
SQL Error
Io Exception
Software caused connection abort:socket write error
Exception:java.sql.SQLException
What could be the problem I am trying to use the FWK_TBX_EMPLOYEES schema object for my tutorials and the JDeveloper that I am using is 10.1.3.1 with OA extension
Message was edited by:
VikramIyer

Try asking this on the OA Framework forum.
http://forums.oracle.com/forums/categoryHome.jspa?categoryID=84

BI Publisher throwing error when creating data model from Oracle BI Answers

I'm having issues creating BI Publisher Datamodel using BI EE as a source. When i select the answer and put the inforamtion needed and hit OK ....it's start doing soehting and then it get there ....
In the logs:
It is weird that the Logs is having a message saying that path was not found "/users/mpoler/Data Model without Title.xmd"/_datamodel.xmd
Any clue on what is going on?
Thanks!
Matias

Can you try using a different account to run this report, if possible use someone from a different Application role.
The last Time I saw something similar was when the integration between BIP and Analysis was done incorrectly and a few roles were missed.
Letus know what you find out..

SSRS dataset throws error when another stored procedure is called inside dataset stored procedure

Hello;
I am using Report Build 3.0, I have a simple report which gets data using dataset which is created from a Stored Procedure. I have another stored procedure which updates the data in the table which is used for the report. I want to get the live data on report everytime
the report is run so that I call that stored procedure (sp_updatedata) inside my report dataset stored procedure and here where my report fails as it throws error while creating dataset.
Here is sample:
sp_updatedata (this only returns "Command(s) completed successfully"
Create Proce sp_getReportData
As
Begin
Exec sp_updatedata -- I call it to update the data before it displays on the report
Select * from customers
End
If I remove this line it works.
Exec sp_updatedata -- I call it to update the data before it displays on the report
Thanks
Essa Mughal

Hi MESSA,
According to your description, you create a dataset based on a stored procedure. In this procedure, it calls another procedure. Now it throws error when creating dataset. Right?
In Reporting Services, when creating dataset, all the query or stored procedure will be executed in SSMS. So if the procedure can be executed in SSMS, it supposed to be working in SSRS. However, it has a limitation in SSRS. In a dataset, it can only return
one result set.
In this scenario, I don't think it's the issue of calling other procedure inside of procedure. Because we tested in our local environment, it works fine. I guess the sp_updatedata returns a result set, and the "select * from customers" returns
another result set. This might be the reason cause the error.
Reference:
Query Design Tools in Report Designer SQL Server Data Tools (SSRS)
Reporting Services Query Designers
If you still have any question, please post the error message and the store procedure (sp_updatedata).
Best Regards,
Simon Hou

Creating of incoming invoice automatically when documen info record created

Hi all,
I apologize because I am asking many questions on this forum during the last few weeks, but I have some problems which I can't solve by myself in one project.
So, this time the question is about incoming invoices.
Here is the situation:
When our customer receives incoming invoice (in paper form) we scan it and send it to one Document management system. In that system we verify the invoice and approve it. After that step the document is released to SAP (only the document info record is created and that info record points to the original document (pdf file) in that DMS).
Now the question is:
Is it possible to automatically create incoming invoice (parked) when the document is released to SAP (it+s document info record created) and to create link between these two SAP objects? Basically it means that at the moment when doc. info record is created, the incoming invoice is created (only with mandatory data) and saved (parked).
We need this functionality because our client wants to have the access to original document (pdf file) when he is about to finish the incoming invoice.
So, is it possible to set up some parameters so that incoming invoice is created automatically after the document info record is created, and linked to that document info record?

I was not aware that u have already done coding to create DIR in SAP. In that case u don't need to rely on status triggering, u may create the invoice prior to DIR creation and then link it to the DIR.It can be done in the way u have mentioned. I.e. linking at the time of DIR with BAPI_DOCUMENT_CREATE.
I doubt we have any direct link to Incoming Invoice from DIR. One of the options i can think of is linking DIR to EKPO(Purchase Order Item) which is mentioned in Invoice.
Else u may need to add another object with object table "RBKP"
Following link will help u in creating new Object for development of new screens [http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm]
BAPI_DOCUMENT_CREATE2 is the latest BAPI instead of BAPI_DOCUMENT_CREATE.
Points Appreciated.

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
Word, and powerpoint application are working fine.
Environment : Windows 7 64-bit, MS Office 2013 64-bit
Steps to recreate
(i) Create new user account and add to any group ( do not log on using this
account)
(ii) runas /user:<new user account> <fullpath>\excel.exe
it will ask password so enter on command prompt
(iii) open any excel document and click File->Print
(iv) verify result (it is failing) it pop ups below error
Error:`Microsoft Excel
No printers are installed. To install a printer click the File tab, and then click
Print. Click No Printers Installed, and then click Add Printer. Follow the
instructions in the Add Printer dialog box.

Sorry for late reply i was not at work
I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
Probably excel behaves differently from other office applications.
Probably it is a bug in excel
Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

Short dump error when extracting delta records from R/3

I am working on BW 3.5 and I am facing some short dump error when extracting delta records from the r/3 to BW.
Below is the error message
Kindly do the needful ASAP.
Job started
Step 001 started (program SBIE0001, variant &0000000024277, user ID BWREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 0ISCM_PAYMENT_01
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 2000000000                              *
abap/heap_area_total.......... 2000000000                              *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 6500000                                 *
ztta/roll_extension........... 2000000000                              *
2,454 LUWs confirmed and 2,454 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DAT
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled

Hi,
I look at the transaction ST22 to see which type of error has given you. Take a look at the notes to correct the error.
Another option is to look at OSS notes, because the error is giving you a standard extractor.
Greetings,

(500) Internal Server Error when create storage table use development account

Yesterday, our team suddenly cannot use storage emulator all, it always said 'can not create database' when start the emulator. Finally, we found a issue may affect this, we delete the WAStorageEmulatorDb30.mdf file in C:\Users\[User], and create manully
in localdb, and so we can start the storage emulator later.
But we still can not use it, since it always throw exception when creating Tables/Blobs/Queues, the exception like this:
Microsoft.WindowsAzure.Storage.StorageException was caught
HResult=-2146233088
Message=The remote server returned an error: (500) Internal Server Error.
Source=Microsoft.WindowsAzure.Storage
StackTrace:
at Microsoft.WindowsAzure.Storage.Core.Executor.Executor.ExecuteSync[T](RESTCommand`1 cmd, IRetryPolicy policy, OperationContext operationContext)
at Microsoft.WindowsAzure.Storage.Table.TableOperation.Execute(CloudTableClient client, CloudTable table, TableRequestOptions requestOptions, OperationContext operationContext)
at Microsoft.WindowsAzure.Storage.Table.CloudTable.Exists(Boolean primaryOnly, TableRequestOptions requestOptions, OperationContext operationContext)
at Microsoft.WindowsAzure.Storage.Table.CloudTable.CreateIfNotExists(TableRequestOptions requestOptions, OperationContext operationContext)
at WorkerRole1.TableService..ctor() in c:\Users\<user>\Documents\Visual Studio 2013\Projects\WindowsAzure8\WorkerRole1\TableService.cs:line 21
InnerException: System.Net.WebException
HResult=-2146233079
Message=The remote server returned an error: (500) Internal Server Error.
Source=System
StackTrace:
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.WindowsAzure.Storage.Core.Executor.Executor.ExecuteSync[T](RESTCommand`1 cmd, IRetryPolicy policy, OperationContext operationContext)
InnerException:
And if we visit this url: http://127.0.0.1:10002/devstoreaccount1, it said Internal Error:
<error xmlns="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata">
<code>InternalError</code>
<message xml:lang="en-US">
Server encountered an internal error. Please try again after some time. RequestId:e9637e04-76ad-4237-8df0-31a511e4c116 Time:2014-04-25T00:56:16.9990136Z
</message>
</error>
Any ideas of this? We still don't know what caused this whole trouble from yesterday, is it possible affect the storage emulator just by code? We were coding, not configuring anything. Strange.

I have tried it before, but not works.
Finally, I solved this issue by delete LocalDB instance, uninstall storage emulator and install LocalDB instance / storage emulator again, it works now. Quite strange.

LSMW creating info records

I am using standard batch input LSMW for creating info records with obj 0060 and program RM06IBI0. In the last step while running session I am getting error as 'Field EINE-EVERS. (shipping instructions ) is not an input field.' Does anybody know why? Is this field not there in ME11 transaction?

resolved

Creating info records ME11 LSMW

I am using standard batch input LSMW for creating info records with obj 0060 and program RM06IBI0. In the last step while running session I am getting error as 'Field EINE-EVERS. (shipping instructions ) is not an input field.' Does anybody know why? Is this field not there in ME11 transaction?

resolved

[Windows] file.url throw error when application executable in root directory

Here is the bugbase ticked: Bug#3940278 - [Windows] file.url throw error when application executable in root directory
If you launch AIR application packaged as bundle from root directory and try to get url property of any file you get IllegalOperationError.
No matter what file url property you try to get.
It's a big problem when you distribute your application on CD disks or flash drive.
I'd like to ask everyone affected by this issue to take a minute and vote for the following bug.
Thanks.

I checked all deployment descriptions and there are no references to t3://localhost:7001. Few months back, I had the complete clustering setup working on 2 machines and now when I deploy my application on same configuration, it fails with t3://localhost:7001 unreachable error. I created a new cluster configuration on one machine with 2 managed server and it deploys fine. Can not figure out what has changed ?

Throwing error when Creating Info record

Similar Messages

Maybe you are looking for