Thuderbolt Cable Issue, Lags Every Minute

Hey,
Bought a thunderbolt HDMI cable for 30 bucks from best buy. Want to connect my laptopto TVs and such. First time I used it, was fine. Watched some videos. Second time, every minute or so, the bottom portion of my macbook, the dock, would become visible for a moment as the video lagged on the TV. Wouldn't stop happening. Returned the cable, got a new one. Same problem. I assume I need to change some kind of setting, like refresh rate or something. The dock thing isn't happening too much anymore. Now, the video just looks to be lagging every 30 seconds, like the screen will freeze for a moment. It's not my macbook, it's the cable. Any one know what's going on?
It annoys me that I go out and buy a cable SPECIFICALLY made for my apple product, yet something's up with the settings... Seems to be a recurring problem.
Any help is greatly appreciated.
Thanks for reading.

I need to bump this... ANYONE have an answer???????

Similar Messages

After update my iPhone 4 iOS to 4.0.1 my bettery gone so bad. Every 1% goes in every minute while browsing. Also system gone proper slow and 3G conectivity gone very poor. I really want to go back to ios 4.3.4 until these issue is resolved. Please help.

After update my iPhone 4 iOS to 5.0.1 the. Bettery gone so bad. Every 1% goes every minute while browsing. Also system is very slow and 3G. Connectivity gone very poor. I want to go back to ios 4.3.4 until these problem are resolved. Please help.

Just look around the forum posts. Your issue is the number one problem reported by users. There are many suggestions found, some work for some users, others do not.
Some users have reported no battery problems after the upgrade. Others have improved performance after upgrading to 5.0.1 from 5.0. YMMV.
Many of the posts offer suggestions about changing various settings - there are many that affect the battery life.
Once you upgrade the iOS on a device, you cannot go back to a previous version.

Numerous trace files are generating every minute causing space issue

Hi All,
numerous trace files are generating every minute <SID>_<PID>_APPSPERF01.trc format.
entry in trace file will be like..
EXEC #10:c=0,e=0,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=1734896627,tim=1339571764486430
WAIT #10: nam='SQL*Net message to client' ela= 6 driver id=1952673792 #bytes=1 p3=0 obj#=34562 tim=1339571764491273
FETCH #10:c=0,e=0,p=0,cr=2,cu=0,mis=0,r=1,dep=0,og=1,plh=1734896627,tim=1339571764486430
WAIT #10: nam='SQL*Net message from client' ela= 277 driver id=1952673792 #bytes=1 p3=0 obj#=34562 tim=1339571764491806
EXEC #11:c=0,e=0,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=2638510909,tim=1339571764486430
FETCH #11:c=0,e=0,p=0,cr=9,cu=0,mis=0,r=0,dep=0,og=1,plh=2638510909,tim=1339571764486430
WAIT #11: nam='SQL*Net message to client' ela= 6 driver id=1952673792 #bytes=1 p3=0 obj#=34562 tim=1339571764493265
*** 2012-06-13 03:16:14.496
WAIT #11: nam='SQL*Net message from client' ela= 10003326 driver id=1952673792 #bytes=1 p3=0 obj#=34562 tim=1339571774496705
BINDS #10:
Bind#0
oacdty=01 mxl=32(21) mxlc=00 mal=00 scl=00 pre=00
oacflg=00 fl2=1000001 frm=01 csi=871 siz=2064 off=0
kxsbbbfp=2b8ec799df38 bln=32 avl=03 flg=05
value="535"
Bind#1
oacdty=01 mxl=32(21) mxlc=00 mal=00 scl=00 pre=00
oacflg=00 fl2=1000001 frm=01 csi=871 siz=0 off=32
kxsbbbfp=2b8ec799df58 bln=32 avl=04 flg=01
value="1003"
SQL> show parameter trace
NAME TYPE VALUE
tracefiles_public boolean TRUE
log_archive_trace integer 0
sec_protocol_error_trace_action string TRACE
sql_trace boolean FALSE
trace_enabled boolean TRUE
tracefile_identifier string
Profile options like "FND:Debug Log Enabled" and "Utilities:SQL Trace" are set to No
Can some one help me to stop these trace generation.
is there any way to find the cause for these trace?
Thanks in adv...

Hi;
Please check who enable trace. Please see:
How to audit users who enabled traces?
check concurrent programs first
*from the screen
*F11, then select the trace, then Ctrl+F11
Concurrent > program > define
open the form, press F11 (query mode), select the trace, then (ctrl + f11) this should return all concurrent programs which have trace enabled
Regard
Helios

Recurring ping timeout to certain IPs every minute

Hi all,
Had BT broadband for a month now and have been getting chronic lag when playing online games and surfing the web. The same issue seems to manifest when pinging certain IP addresses using "ping -t" in command prompt. I consistently get two consecutive timeouts every 55-60 seconds to IPs located USA, France and Sweden.
Here's an image showing what I mean:
I experience the same issue with two devices, my PC connected using the ethernet cable to a home hub 3.0 (plugged into master socket), and my phone connected wirelessly to the device. I have also tried a different router, a draytek vigor 2800v and have experienced the same issue.
One thing to note is that not all IP addresses produce this problem. I've performed a tracert to eu.battle.net which is the first server that I noticed the problem with. If I go down the list and ping each of these addresses in turn, I find that the issue begins at core2-pos1-0-0.telehouse.ukcore.bt.net [62.6.201.86]. However, I go through them in order of least ping, indicating the route that my network packets are following, the issue actually begins at ldn-bb1-link.telia.net [80.91.252.197].
This result is backed up by someone elses findings in a similar thread.
Here's the full tracert:
>tracert eu.battle.net
Tracing route to eu.battle.net [80.239.186.40]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms BTHomeHub.home [192.168.1.254]
2 18 ms 18 ms 18 ms 217.32.147.96
3 18 ms 19 ms 18 ms 217.32.147.126
4 27 ms 27 ms 27 ms 213.120.181.146
5 27 ms 26 ms 26 ms 213.120.179.46
6 26 ms 26 ms 27 ms 213.120.179.182
7 30 ms 31 ms 30 ms acc2-10GigE-10-2-0.sf.21cn-ipp.bt.net [109.159.251.202]
8 39 ms 39 ms 39 ms core2-te0-12-0-6.ealing.ukcore.bt.net [109.159.251.135]
9 37 ms 37 ms 36 ms core2-pos1-0-0.telehouse.ukcore.bt.net [62.6.201.86]
10 40 ms 40 ms 39 ms t2as2-tge4-3.uk-lon1.eu.bt.net [166.49.214.145]
11 37 ms 37 ms 36 ms 166-49-211-34.eu.bt.net [166.49.211.34]
12 36 ms 36 ms 36 ms ldn-bb1-link.telia.net [80.91.252.197]
13 131 ms 52 ms 52 ms prs-bb1-link.telia.net [80.91.247.6]
14 54 ms 53 ms 55 ms prs-b8-link.telia.net [213.155.131.7]
15 * * * Request timed out.
16 80-239-170-114.customer.teliacarrier.com [80.239.170.114] reports: Destination net unreachable.
Trace complete.
I'd appreciate it a lot of someone could look into this. It's ruining some of my games.

Not sure the issue is with telia. In fact I don't know what's going on but here are my latest findings.
I was pinging some more addresses and found that www.google.co.uk was also timing out every 60 seconds, so I got this trace route:
Tracing route to www.l.google.com [209.85.229.105] over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms BTHomeHub.home [192.168.1.254]
2 18 ms 18 ms 18 ms 217.32.147.96
3 91 ms 18 ms 18 ms 217.32.147.142
4 27 ms 27 ms 26 ms 213.120.181.146
5 27 ms 27 ms 27 ms 213.120.179.46
6 26 ms 27 ms 27 ms 213.120.179.182
7 * 27 ms 27 ms 109.159.251.235
8 44 ms 43 ms 39 ms core2-te0-13-0-2.ealing.ukcore.bt.net [109.159.251.139]
9 35 ms 69 ms 34 ms acc1-10GigE-0-5-0-6.l-far.21cn-ipp.bt.net [109.159.254.108]
10 38 ms 38 ms 38 ms 195.99.126.107
11 36 ms 82 ms 50 ms 66.249.94.76
12 35 ms 37 ms 35 ms 209.85.253.92
13 45 ms 44 ms 44 ms 66.249.95.173
14 45 ms 45 ms 45 ms 209.85.252.83
15 47 ms 40 ms 58 ms 209.85.243.85
16 * * 46 ms 209.85.229.105
I pinged the IPs and found lines 10 and 11 were timing out every minute. All the IPs after that were non responsive.
A minute later, I then redid the traceroute and got a different path, and now pinging google is fine and not producing any time outs at all.
Tracing route to www.l.google.com [209.85.229.104] over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms BTHomeHub.home [192.168.1.254]
2 18 ms 18 ms 18 ms 217.32.147.96
3 18 ms 18 ms 19 ms 217.32.147.126
4 24 ms 23 ms 23 ms 213.120.181.110
5 23 ms 24 ms 23 ms 213.120.179.46
6 23 ms 24 ms 24 ms 213.120.179.182
7 24 ms 24 ms 24 ms acc2-10GigE-0-2-0.sf.21cn-ipp.bt.net [109.159.25
1.194]
8 36 ms 35 ms 35 ms core1-te0-12-0-6.ilford.ukcore.bt.net [109.159.2
51.133]
9 59 ms 31 ms 31 ms peer1-xe11-0-0.telehouse.ukcore.bt.net [109.159.
254.124]
10 31 ms 32 ms 31 ms 195.99.126.111
11 29 ms 29 ms 29 ms 66.249.94.78
12 31 ms 32 ms 32 ms 209.85.253.94
13 35 ms 35 ms 35 ms 72.14.232.134
14 40 ms 35 ms 37 ms 72.14.236.191
15 40 ms 49 ms 53 ms 209.85.243.85
16 36 ms 58 ms 35 ms ww-in-f104.1e100.net [209.85.229.104]
Ok so when www.google.co.uk resolves to 209.85.229.104 it's fine, not ping timeouts at all. But when it resolves to 209.85.229.105 I get the 2 ping timeouts every minute or so as I have mentioned previously.

Apple tv 3 requesting ip address every minute

Good evening,
My apple Tv 3 is connected to my router via ethernet cabling. Every device on my home network functions flawlessly. However, I noted that most of the time, my Apple Tv has been unable to correctly stream movies from home sharing, or even rented movies from Itunes.
I tried mostly everything, and never found a solution. My investigation led me to notice that my Apple Tv has been requesting an ip address from my router every minute or so. My DHCP log looks like:
2014-10-09 21:37:51
info
IP address 192.168.101.51 is assigned to b0[Edited. It's the apple tv mac address].
2014-10-09 21:36:09
info
IP address 192.168.101.51 is assigned to b0
2014-10-09 21:34:25
info
IP address 192.168.101.51 is assigned to b0
2014-10-09 21:32:39
info
IP address 192.168.101.51 is assigned to b0
2014-10-09 21:30:56
info
IP address 192.168.101.51 is assigned to b0
2014-10-09 21:29:13
info
IP address 192.168.101.51 is assigned to b0
2014-10-09 21:27:31
info
IP address 192.168.101.51 is assigned to b0
2014-10-09 21:25:49
info
IP address 192.168.101.51 is assigned to b0
And it goes on and on like that all day. It's the only device doing that. I tried setting the ip address manually, but it did not help.
Any clue?
Thanks!

I had the same issue and it was filling up my logs as well. I set a static IP on my Apple TV as well as set a mac reservation on my router and it hasn't generated a log entry in the past half hour. I'll take that as a win. I do suspect that the wireless is still on even though I am physically connected via ethernet. It would be nice to see an option to turn it off.

Linksys WRT54G power/cable issues.

So I just bought a Linksys WRT54G for $4 at a flea market, but the lady didn't have the exact power cable, so I just grabbed whatever was the closest. The power cable works, but every couple of minutes the router's power light will start blinking and the internet is out. The good news is it comes right back on after about 20 seconds and I also have an original Linksys power cable from my other router, which fixes the issues.
In conclusion....I know the power cable is whats causing it. A new oem charger is like $12 from amazon, but is there any cheaper alternatives from walmart/etc?
Unless someone knows if there is something else causing the issue, but like I said, when I plug an original linksys charger in it from another linksys router, the issue is not there.

Universal power adapters should work provided with the proper output voltage and amperage. It's adjustable so it would be easier to match the requirement. Check your original linksys adapter then match the output voltage (V) and amperes (A or mA).

Firefox keeps crashing at random times every minute or so, need help.

Firefox crashes pretty much every minute I browse the internet. Sometimes even if I just leave it there doing nothing. I've tried safe mode. I've tried disabling hardware accaleration. I've tried creating a new firefox profile. I've tried disabling flashplayer protected mode. Nothing worked so far. Oh and I can enter some websites through firefox for a shortwhile before it crashes but I've noticed that going to imdb.com and mozilla.org causes it to crash instantly don't know if it helps.
Here are the lat 5 crashes:
<pre><nowiki>0da6cbf3-643b-4a8b-bcb2-5ec0c983b213 7/20/20139:18 PM
bp-281e3c83-b2e2-41c9-9484-d15622130720 7/20/20139:12 PM
bp-459a2a4c-381e-4dc3-ad4a-2566d2130720 7/20/20138:57 PM
bp-3e06e070-6314-4284-81b8-323a12130720 7/20/20138:57 PM
bp-bf666492-3cd5-41cd-bea2-3a6752130720 7/20/20138:49 PM</nowiki></pre>

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Why does my mouse keep losing connection every minute

why does my mouse keep losing connection every minute, its not the batteries

I'm having the same issue. Every so often it loses connection then re establishes. This goes on repeatedly.
If you change batteries while the computer is still active then it takes for ever to re connect.
Can't wait until someone replies to your question.

Solid amber flashes green once about every minute + even more problems

I have a problem with my airport express:
-Even after doing a factory reset my airport express has an solid amber light wich flashes green once about every minute.
- Sometimes the LED light even goes off for a couple of seconds.
- I can't find the airport express in the airport express utility, even when I directly connect a LAN cable it won't find it.
- I also can't find the airport express wirelessly.
Please help me fixing this airport express.

Lauren, welcome to the discussions!
Unfortunately, the symptoms you are describing likely indicate that your Express has an internal problem and may need to be replaced.
If you have not already done so, try a Factory Default Reset to see if that might help.
Power down the Express and wait a few minutes.
Then hold in the reset button and keep holding it in as you plug the device back in to power
Keep holding the reset button until you see the amber light begin to blink more quickly. This normally takes about 5-10 seconds
See if that helps. If no luck, I'm afraid the Express has failed and will need to be replaced.

WCCP bouncing every minute

We've pair of C7206VXR NPE-G2s that we're trying to upgrade to ASR1004 that talks to pair of WAE7371s. I've attempted twice to upgrade the routers but failed due to "WCCP" bouncing every minute. TAC suggested that I modify the wccp load balacing feature from
"wccp tcp-promiscuous router-list-num 1 hash-source-ip hash-destination-ip" to "wccp tcp-promiscuous router-list-num 1 mask-assign".
But the "WCCP" still bouncing every minute even after the change.
Has anyone experienced same issue ? if so, Could you share your solution if the solution has been found ?
We're running 4.1.5f on WAEs and 15.0(1)S on the ASR1004.

Hi
I have 2 x ASR 1002 facing 2 x 7341 (not exactly the same, but...)
I'm using the following and it works well:
wccp router-list 1 10.x.x.1 10.x.x.21
wccp tcp-promiscuous mask src-ip-mask 0x300 dst-ip-mask 0x0
wccp tcp-promiscuous router-list-num 1
wccp version 2
egress-method negotiated-return intercept-method wccp
WAAS s/w is 4.3.3
ASR is asr1000rp1-adventerprisek9.03.01.00.S.150-1.S.bin
HTH
Anthony

Full Garabage Collection every minute in oc4j_soa instance

It looks like a Full GC cycle is run exactly every minute on a IDLE BPEL instance that does not have any instances. This is a basic 10.1.3.1.0 BPEL install with no Out of the box parameters modified / tuned. Is this a known issue / bug with a fix ?
Also, we have 3 - 5 Asnyc BPEL Processes that involve human workflow. The invocation rate of these workflows is medium (100 instances per hour),but the instances may last long due to human workflow. What would be the recommended settings for these in terms of worker, invoker and dispatcher threads, DB Connections etc? Is there any tuning guide/ spreadsheet available for computation of optimum values ?
$ jstat -gcutil 7123 60000
S0 S1 E O P YGC YGCT FGC FGCT GCT
0.00 62.95 29.18 11.66 99.66 651 13.801 62 62.792 76.593
18.75 0.00 86.85 11.78 99.67 666 14.103 63 63.845 77.948
0.00 25.00 71.48 10.95 99.63 681 14.404 64 64.908 79.312
0.00 41.97 54.68 11.08 99.64 697 14.722 65 65.900 80.622
0.00 41.97 30.84 11.21 99.65 713 15.043 66 66.853 81.897
0.00 41.97 7.20 11.33 99.66 729 15.352 67 67.815 83.168
87.81 0.00 75.06 10.92 99.64 744 15.652 68 68.818 84.469
65.86 0.00 43.25 11.04 99.64 760 15.984 69 69.798 85.782
84.94 0.00 82.86 11.23 99.68 776 16.292 70 70.776 87.068
59.61 0.00 1.74 11.41 99.69 792 16.606 71 71.758 88.364
0.00 25.00 67.50 10.94 99.65 807 16.897 72 72.776 89.673
0.00 62.95 23.52 11.06 99.65 823 17.219 73 73.728 90.947
$ top -p 7123
7123 vvedula 17 0 1491m 338m 46m S 3.0 16.7 6:45.31 java => 3% CPU usage

Thanks for the replies. Let me clarify a few things:
1) We've tried setting -Xms to -Xmx (a long time ago, so maybe it's time to revisit), but doing so caused our app to exhibit other strange behavior due to the fact that no full GCs were ever done until all the allocated memory was exhausted. These full GCs, when finally triggered, ended up taking quite some time due to the fact that there was a lot of compaction (or attempted compaction) going on.
2) I don't have a problem with doing full GCs (I use the term full GC because both a young and old generation GC happens at every full GC), but I have a problem with the full GCs happening every 2 or 3 seconds and taking up 100% cpu for minutes (because the concurrent phases would run back-to-back for every full GC). Especially when the app has 1/10th the volume of our other app which does a young gc every 20s or so and a full gc every 5 or 6 minutes.
We've gone ahead and set the initial heap size to -Xms5g for today's run. We initially went without setting -Xms (again, just like our other instance) and we started seeing full GCs almost immediately as the JVM did not want to allocate more heap. We then went with -Xms2g which delayed the full GCs for a few hours until the used heap got close to the allocated heap. Full GCs then kicked in for cycles (15 or 30 mins long) until the JVM increased the heap by a few hundred mb each time.
As I've stated, I'm struggling with the fact that we have another instance of the application that does not exhibit this behavior and does not have -Xms set at all. And the only thing I know that is different is that during startup, the amount of data we load is quite large (~6-8gb) and so our "min size" is already pretty large before starting to handle additional volume. Hopefully setting -Xms to 5g will replicate the starting point of the original instance.
I'll respond back with updates.
Thx,
Josh
Edited by: user10720003 on Aug 12, 2009 4:15 AM

DSL Connection disconnecting every minute

I'm having major issues. I'm in California and as of 6:20pm August 2nd, 2009. My connection has been disconnecting every minute. I restarted my computer and turned my modem off. When I'm browsing through the Internet it disconnects me, and when I try to browse through websites it says "Waiting for website" its getting really annoying. Is there disconnecting issues to anyone in California, especially Southern California?
Keep in mind I've never had this sort of problem before. Is like Verizon doing some kind of work on their DSL lines?
Message Edited by MEMDB on 08-02-2009 06:45 PM

Here is what most of all that stuff means..
Margin (dB) - Signal to noise margin. 6 is pretty bad possibly unusable at times, 20 is very good. You normally want 12dB or better IIRC from back in my DSL days. The higher the number, the better to a point.
Line Attenuation - Measure the amount the signal has degraded. Below 20dB is excellent, above 50 is poor, fill in the dots for anything in between.
Transmit Power - The higher the number, the more power is required to transmit. This number will vary based on the other numbers.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Explorer.exe is crashing/restarting every minute - faulting module ntdll.dll

I upgraded to Windows 8 on 11/18 and started having problems where explorer.exe is restarting every minute or so. Here is the error from the event log:
Faulting application name: explorer.exe, version: 6.2.9200.16433, time stamp: 0x50763312
Faulting module name: ntdll.dll, version: 6.2.9200.16420, time stamp: 0x505ab405
Exception code: 0xc000071f
Fault offset: 0x000000000011808f
Faulting process id: 0x12c8
Faulting application start time: 0x01cdc8c32effec36
Faulting application path: C:\Windows\explorer.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: 9220779c-34b6-11e2-be72-e06995f1e71a
Faulting package full name:
Faulting package-relative application ID:
I worked with Microsoft Tech Support for 4 days and ended up doing a clean install of Windows 8. I had been told by Microsoft that they would escalate me to Tier 2, but they called back and said it was an HP/Hardware issue and I would have to
work with them. Chatted with HP, they said it was an OS issue.
Anyone have any thoughts?
Dan

Here is the dump file. Any assistance is greatly appreciated!
http://sdrv.ms/XyPNrE
google drive is the cause:
FAULTING_IP:
ntdll!RtlReportCriticalFailure+89
000007f8`47d9a485 eb00 jmp ntdll!RtlReportCriticalFailure+0x8b (000007f8`47d9a487)
EXCEPTION_RECORD: ffffffffffffffff -- (.exr 0xffffffffffffffff)
ExceptionAddress: 000007f847d9a485 (ntdll!RtlReportCriticalFailure+0x0000000000000089)
ExceptionCode: c0000374
ExceptionFlags: 00000001
NumberParameters: 1
Parameter[0]: 000007f847defd60
PROCESS_NAME: explorer.exe
ERROR_CODE: (NTSTATUS) 0xc0000374 - Ein Heap wurde besch digt.
EXCEPTION_CODE: (NTSTATUS) 0xc0000374 - Ein Heap wurde besch digt.
EXCEPTION_PARAMETER1: 000007f847defd60
NTGLOBALFLAG: 0
APPLICATION_VERIFIER_FLAGS: 0
APP: explorer.exe
MANAGED_STACK: !dumpstack -EE
OS Thread Id: 0x6bc (50)
Current frame:
Child-SP RetAddr Caller, Callee
BUGCHECK_STR: APPLICATION_FAULT_WRONG_SYMBOLS_clr.dll_UNEXPECTED_UNKNOWN_INDEX_RESULT
PRIMARY_PROBLEM_CLASS: WRONG_SYMBOLS_clr.dll_UNEXPECTED_UNKNOWN_INDEX_RESULT
DEFAULT_BUCKET_ID: WRONG_SYMBOLS_clr.dll_UNEXPECTED_UNKNOWN_INDEX_RESULT
LAST_CONTROL_TRANSFER: from 000007f847d9f2a0 to 000007f847d9a485
STACK_TEXT:
ntdll!NtWaitForSingleObject
ntdll!RtlReportExceptionEx
ntdll!RtlReportException
ntdll!RtlReportCriticalFailure
ntdll!_C_specific_handler
ntdll!_GSHandlerCheck_SEH
ntdll!RtlpExecuteHandlerForException
ntdll!RtlDispatchException
ntdll!RtlRaiseException
ntdll!RtlReportCriticalFailure
ntdll!RtlpLogHeapFailure
ntdll! ?? ::FNODOBFM::`string'
msvcr90!free
googledrivesync64!DllCanUnloadNow
shell32!CFSIconOverlayManager::_GetFileOverlayInfo
shell32!CFSIconOverlayManager::GetFileOverlayInfo
shell32!CFSFolder::_GetOverlayInfo
shell32!CIconOverlayTask::InternalResumeRT
shell32!CRunnableTask::Run
shell32!CShellTask::TT_Run
shell32!CShellTaskThread::ThreadProc
shell32!CShellTaskThread::s_ThreadProc
SHCore!ExecuteWorkItemThreadProc
ntdll!RtlpTpWorkCallback
ntdll!TppWorkerThread
kernel32!BaseThreadInitThunk
ntdll!RtlUserThreadStart
FOLLOWUP_IP:
googledrivesync64!DllCanUnloadNow+cd8
000007f8`32602dc8 488d542430 lea rdx,[rsp+30h]
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: googledrivesync64!DllCanUnloadNow+cd8
FOLLOWUP_NAME: wintriag
MODULE_NAME: googledrivesync64
IMAGE_NAME: googledrivesync64.dll
DEBUG_FLR_IMAGE_TIMESTAMP: 50cfe78c
STACK_COMMAND: ~50s; .ecxr ; kb
FAILURE_BUCKET_ID: WRONG_SYMBOLS_clr.dll_UNEXPECTED_UNKNOWN_INDEX_RESULT_c0000374_googledrivesync64.dll!DllCanUnloadNow
BUCKET_ID: APPLICATION_FAULT_WRONG_SYMBOLS_clr.dll_UNEXPECTED_UNKNOWN_INDEX_RESULT_googledrivesync64!DllCanUnloadNow+cd8
WATSON_STAGEONE_URL: http://watson.microsoft.com/StageOne/explorer_exe/6_2_9200_16433/50763312/ntdll_dll/6_2_9200_16420/505ab405/c0000374/000ea485.htm?Retriage=1
Followup: wintriag
0:050> lmvm googledrivesync64
start end module name
000007f8`32600000 000007f8`326bb000 googledrivesync64 (export symbols) googledrivesync64.dll
Loaded symbol image file: googledrivesync64.dll
Image path: C:\Program Files (x86)\Google\Drive\googledrivesync64.dll
Image name: googledrivesync64.dll
Timestamp: Tue Dec 18 04:48:28 2012 (50CFE78C)
CheckSum: 000BE686
ImageSize: 000BB000
File version: 1.7.4018.3496
Product version: 1.7.4018.3496
File flags: 0 (Mask 3F)
File OS: 4 Unknown Win32
File type: 2.0 Dll
File date: 00000000.00000000
Translations: 0409.04b0
CompanyName: Google
ProductName: Google Drive
ProductVersion: 1.7.4018.3496
FileVersion: 1.7.4018.3496
FileDescription: Google Drive shell extension
LegalCopyright: Google
disable the sharing overlay icons in the google drive options.
"A programmer is just a tool which converts caffeine into code"

Event 12317 every minute... File Server

Hello,
I am getting the following error every minute on the File Server Cluster node B
Log Name: Application
Source: SRMSVC
Date: 2/20/2015 10:35:13 AM
Event ID: 12317
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: BOPFSCL1A.ad
Description:
File Server Resource Manager failed to enumerate share paths or DFS paths. Mappings from local file paths to share and DFS paths may be incomplete or temporarily unavailable. FSRM will retry the operation at a later time.
Error-specific details:
Error: NetShareEnum, 0x80070005, Access is denied.
I have checked the blog:
http://blogs.technet.com/b/filecab/archive/2006/09/29/459430.aspx
Even the Authenticated Users Group was already in the Users Group for th BuiltIn Folder in AD I have restarted the srmsvc and srmreports ...
But still the error 12317 is poping up...
Any idea?
Thanks,
DOm
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

Hi Dom,
How are things going? Please let us know if there is any progress or any new error occurs.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Still having the issue and even on another cluster now...
https://social.technet.microsoft.com/Forums/windowsserver/en-US/a07def79-50aa-4883-96e5-50d4cddd8d9a/cluster-nodes-loosing-communication?forum=winserverClustering
Any clue?
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

My mac pro (SL 10.6.8) wakes up every minutes when I use wake on lan and share a HD. when I unplug the ethernet it doesn't wake so I suppose that some thing wakes it up on my network ( 2 mac books, 2 iPads and 2 time capsules !) How can I fix that?

Hy ,
My mac pro (SL 10.6.8) wakes up every minutes when I use wake on lan and I share one of my Hard Drive.
When I unplug the ethernet cable it doesn't wake any more so I suppose that some thing wakes it up on my network ( 1 printer canon MP620, 2 mac books, 2 iPads, 2 IPhones and 2 time capsules !) ...even when all these devices are "sleeping"
Any idea?
THKS
Phil
PS .: I'm french so my english is probably quite strange ! ... Sorry for that

Sorry - posted this in the wrong forum. Reposted in Mac Pro.

Thuderbolt Cable Issue, Lags Every Minute

Similar Messages

Maybe you are looking for