Thumbnail doesn't match actual photo

Something very strange is going on with my iPhoto. I have just imported some photos but when you click on the thumbnail, it expands to a completely different photo! Its therefore impossible to see the full size photo of a particular thumbnail/preview. Any ideas what has happened? help!

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work

Similar Messages

Thumbnails don't match my photos

Hi,
I've noticed a number of photos in iphoto (latest version) all suddenly have the same thumbnail of a particular photo (in some case 30 or 40 photos have the same thumbnail). When I click on the thumbnail I see the real photo but when I use the photo to try to print a photobook the corrupted photo appears.
Does anyone know how I can reset my iphoto folder to rebuild the thumnails from the photos or is this a known bug.
Thanks a lot

Hey Tony,
Follow this article to rebuild your iPhoto Library: http://support.apple.com/kb/HT2638
-- Be sure you have a backup of your library before you rebuild (as the article indicates)
-- I would first choose the check box for Examine and repair permissions and then once that is complete go back and do the options for thumbnails.
Hope that helps.

Displayed photos do not match actual photo

When I click on some of my thumbnail photos, the photo that is displayed is a different photo!
The photo that is available to edit is the one "hiding" under the phony one.
Have I lost my marbles?
I am sure I am not articulating this properly. I haven't seen any other posts about this.
Anybody??

Welcome to the Apple Discussions. Sounds like a damaged database file. Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options. See if that will correct the situation.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Thumbnails don't match underlying photos

I recently migrated my system from my MacBook Pro using iPhoto 08 to my new MacMini using iPhoto 09. Now, my thumbnails are different than the underlying photo. When I click on a thumbnail, an entirely different picture comes up. Any ideas how to fix this?
Thanks.

Back Up and try rebuild the library: hold down the apple and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
Regards
TD

Source list "PODCASTS" # doesn't match actual # of Podcasts

The sourcelist under "Podcasts" indicates I have 29 Podcasts. When I highlite the item, I see only 7 blue dots and actual podcasts. I watched several downloads progress and complete. Why aren't they in my library?

In case anyone experiences this problem, I thought I should close this by reporting that, having installed a recent software update, the problem is now fixed. In other words, it was a bug. iTunes now shows me only the PDFs which are in iBooks (on the Mac) and my grouping in Collections now syncs correctly with my iPhone and iPad.

OS Photo stream doesn't match iOS Photo stream

Have 999 photos on my iOS devices and 62 in the Mac.....can i get them all on my mac too?

Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.

FPGA simulation doesn't match actual performance

I am trying to write a verilog code that will trigger on the positive edge and negative edge of an input signal (which I've called 'async'). My desired output is a short blip (when compared to the frequency of async) on each edge of async, which is slightly delayed from the edge ('t1' and 't3') and whose duration can be controlled ('t2' and 't4'). The comments say what I think my code is doing, but I am new to Verilog, and don't really understand anything. Any help is appreciated.
Here is my code:
`timescale 1ns / 1ps
module attempt5(async, clk, o);
input async;
input clk;
reg switch = 1'b0; //will tell me when async changes
reg [1:3] resync = 3'b000;
reg counter = 1'b0; //keeping track of which edge of async we're on
output reg o = 1'b0;
parameter t1 = 0;
parameter t2 = 100000000;
parameter t3 = 0;
parameter t4 = 100000000;
always @ (posedge clk)
begin
switch <= resync[2] & !resync[3];
switch <= resync[3] & !resync[2];
resync <= {async, resync[1:2]};
end
//^^I'm pretty sure this makes the 'switch' register switch very quickly when 'async' changes
//I've included this always block because I wanted to sync my input signal to the clock, because I read that FPGAs don't do well with asynchronous stuff
always @ (posedge switch)
if (counter == 1) begin
counter = 0;
#t1 o <= ~o;
#t2 o <= ~o;
end else begin
counter = 1;
#t3 o <= ~o;
#t4 o <= ~o;
end
//^^ When the 'switch' register changes, start the the short blip
endmodule
and my constraints file:
NET "clk" TNM_NET = "clk";
TIMESPEC TS_clk = PERIOD "clk" 20 ns HIGH 50 %;
NET "switch" TNM_NET = "switch";
TIMESPEC TS_switch = PERIOD "switch" TS_clk HIGH 50 %;
NET "async" LOC = A2;
NET "o" LOC = C1;
INST "clk_BUFGP" LOC = F1;
NET "clk" LOC = F1;
NET "o" SLEW = FAST;
The code works in the synthesizer, but when I try to test the code using a 1 Hz square wave for the "async" signal and monitoring the "o" using a oscilloscope, nothing happens.
Other details: using a Xilinx XEM 6001 FPGA, and ISE Design Suite 14.4 The way I've tested is to hook up a function generator to pin A2 and a oscilloscope to pin C1, and all I see is noise. Is there any obvious problem here, maybe something like I am not actually connecting to the physical pins properly or something?

There are several things wrong for your code to synthesize properly, but I would still expect that your "o" output would toggle at one edge of the input signal if your clock is really running, and your async input from the signal generator is driving the correct logic levels. I would try a couple tests to make sure this isn't a hardware issue:
1) Change "o" to simply follow the async input. This will verify that your input and output pins are correct and your input waveform has good logic levels.
2) Build a counter that counts up on evey posedge of clk and run its MSB to the "o" output. See if this toggles at the expected frequency. This will show if your clock input is really hooked up correctly and running.
Errors in the code:
switch <= resync[2] & !resync[3];
switch <= resync[3] & !resync[2];
These two lines run in parallel, so switch will really only sense one edge of the input signal. That's because the second assignment statement "wins" over the first, so it's the same as just writing:
switch <= resync[3] & !resync[2];
If you really wanted to detect both edges, you could OR the two conditions together like:
switch <= resync[2] & !resync[3] | resync[3] & !resync[2];
You could also do this using "if" statements like:
if (resync[2] & !resync[3]) switch = 1;
else if (resync[3] & !resync[2]) switch = 1;
else switch = 0;
There are probably other ways to do this.
Then in the second process you use "switch" as a clock, which is a bad practice. It's better to use
it as a clock enable like:
always @ (posedge clk)
if (switch)
begin
end
Finally those time delays are ignored for synthesis, so these lines:
#t1 o <= ~o;
#t2 o <= ~o;
are the same as:
o <= ~o;
o <= ~o;
and again, they happen in parallel (non-blocking assignments), so it's the same as
o <= ~o;
Which is why I would assume the output would toggle once per input async period. If you don't see that you need to verify your connections.

Thumbnails do not represent the actual photos

Hello, I am a newbie, so thank you for any help with my problem.
When I scroll through the thumbnails in library, a whole bunch of them appear for a split second but then other thumbnails are shown instead; then when I click to see the full photo, I see the "real" underlying photo, which doesn't match the thumbnail.
Do I have too many photos (2700) for my memory? Am I supposed to not have so many photos in the library? (sorry for dumb questions)
Thanks,
Juyon

Juyon
Welcome to the Apple user discussion forums
No - the problem is not too many photos - 2700 is not a lot
How much free disk space do you have?
If you have enough make a copy of the iPhoto library and launch iPhoto while depressing the option (alt) and command (apple) keys and rebuild the thumbnails
LN

I recently moved all of my photos from one portable drive to a new and much larger one. I use LR 5 and and all of the folders now have a ? in their folder icon. The thumbnail is there but no actual photo. How do i reconnect them?

i recently moved all of my photos from one portable drive to a new and much larger one. I use LR 5 and and all of the folders now have a ? in their folder icon. The thumbnail is there but no actual photo. How do i reconnect them?
Jim Boehme
[email protected]

Duplicate post
see the answer at your earlier post LR 5

I want to email a photo through iPhoto but it says I need a password... I entered my password but it says it doesn't match - what password do they want and how do I fix? (Facebook and other social media iPhoto posts work - just email asking for pass)

I want to email a photo through iPhoto but it says I need a password... I entered my password but it says it doesn't match - what password do they want and how do I fix? (Facebook and other social media iPhoto posts work - just email asking for password)

Your email password.
iPhoto '11: Email your photos
Open Mac Mail. From the Mac Mail menu bar click Mail > Preferences then select the General tab.
Make a selection from the: Default email reader pop up menu.

Thumbnails dont match slideshow photos.

When I make a new slideshow (manually) the thumbnails shown at the botttom are quite different from the photos showing in the slideshow. -Some are completely different -some have some of the same photos as the slideshow and some different ones -but the thumbnails still don't match the photo being displayed.How do I fix this up?

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
Regards
TD

Error: The decapsulated inner packet doesn't match the negotiated policy in the SA

I upgraded my ASA from 8.2(1) to 8.4(3) as I wanted to try to get Android devices to properly connect via VPN.
After some effort, I was able to get the Android devices to connect via VPN. However, my syslog server has a number of errors recorded that look this this:
%ASA-4-402116: IPSEC: Received an ESP packet (SPI= 0x1E76EFA6, sequence number= 0x1F0) from x.x.x.x (user= testuser) to y.y.y.y. The decapsulated inner packet doesn't match the negotiated policy in the SA. The packet specifies its destination as z.z.z.z, its source as a.a.a.a, and its protocol as tcp. The SA specifies its local proxy as y.y.y.y/255.255.255.255/udp/42246 and its remote_proxy as x.x.x.x/255.255.255.255/udp/0.
Digging further, it seems this error might be due to a NAT issues with the VPN connections. VPN previously worked with Cisco's VPN client on Windows, though I did not test to see if that is no longer working. However, I made no changes in the config, except for those related to additions needed to support L2TP. With the below config, Android clients can connect to the ASA and access the internal network, but they cannot connect to external addresses. I'm at a loss.
The addresses used in the config: 192.168.1.0/24 are on the internal LAN and 192.168.3.0/24 are addresses assigned to VPN clients.
I noted in the config this line:
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
The access list is not referenced anywhere, though it was referenced in the 8.2(1) config like this:
nat (inside) 0 access-list inside_nat0_outbound
I'm not sure what else changed, but I've looked over the config and I just cannot see what the issue might be. I'm hoping somebody might be able to point out my error.
Here's the config file (at least the parts that might be of interest):
: Saved
ASA Version 8.4(3)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
boot system disk0:/asa843-k8.bin
object network obj-192.168.3.0
subnet 192.168.3.0 255.255.255.0
object network obj_any
subnet 0.0.0.0 0.0.0.0
access-list outside_access_in extended permit icmp any interface outside time-exceeded
access-list outside_access_in extended permit icmp any interface outside echo-reply
access-list outside_access_in extended permit icmp any interface outside unreachable
access-list outside_mpc extended permit ip any interface outside
access-list inside_mpc extended permit ip 192.168.1.0 255.255.255.0 any
access-list testVPN_splitTunnelAcl extended permit ip 192.168.1.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
ip local pool VPN-Pool-1 192.168.3.1-192.168.3.254 mask 255.255.255.0
ip verify reverse-path interface outside
nat (inside,any) source static any any destination static obj-192.168.3.0 obj-192.168.3.0 no-proxy-arp
object network obj-192.168.3.0
nat (outside,outside) dynamic interface
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
crypto ikev1 policy 5
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
group-policy testVPN internal
group-policy testVPN attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value testVPN_splitTunnelAcl
default-domain value test.us
group-policy testVPNnsl2tp internal
group-policy testVPNnsl2tp attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol l2tp-ipsec
group-policy testVPNns internal
group-policy testVPNns attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
username testuser password PASSWORD encrypted privilege 15
username testuser2 password PASSWORD nt-encrypted privilege 15
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group testVPN type remote-access
tunnel-group testVPN general-attributes
address-pool VPN-Pool-1
default-group-policy testVPN
tunnel-group testVPN ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNns type remote-access
tunnel-group testVPNns general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNns
tunnel-group testVPNns ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNnsl2tp type remote-access
tunnel-group testVPNnsl2tp general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group testVPNnsl2tp ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNnsl2tp ppp-attributes
authentication ms-chap-v2
One last question: in order to get the connection from Android to work, I was forced to use "tunnel-group DefaultRAGroup". Is that actually a limitation, or did I make an error that forced that requirement? I wanted to use "tunnel-group testVPNnsl2tp".
Thanks!

Chris,
This is still a bit off the mark. I think I might be confusing the issue by including some of the VPN configuration that I had previously installed and working (e.g., two other VPN tunnel groups with split tunneling on one of them). Let's just remove that stuff from consideration. I actually tested the current configs just to see if they are working since the upgrade. testVPN is working with the split tunneling, but testVPNns (no-split tunneling) does not allow external access. I guess there is a NAT config issue there, too, but not sure what it is, yet. I've not investigated that closely.
I want to solve one problem at a time, though I understand there are some interdependencies.
What I'd like to focus on right now is just the L2TP VPN connection.
From what I've been able to understand from the documentation, what I need are these lines:
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
group-policy testVPNnsl2tp internal
group-policy testVPNnsl2tp attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol l2tp-ipsec
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key P74bmqL6rT40bl5
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
crypto ikev1 policy 5
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
I still want to assign the IP addresses to VPN clients out of 192.168.3.0/24.
The tricky part is understanding exactly what NAT rules to insert and to avoid that error message I'm getting relatred to the encapsulated packets. I tried to introduce the commands you had, but it's missing stuff that I would need for L2TP/IPSec (e.g., "mode transport"). I also don't think I want "pfs group5". The above config "works" in that I get connected -- all negotiation is done. It's just that packets from the VPN client are not able to go out to the Internet and I'm seeing that encapsulation error messages when I try to send a packet.
Paul

I just installed a larger hard drive, and used my Time Machine Backup to transfer my info back to the new hard drive. When I open Iphoto, my thumnails are there, but they aren't linked back to the actual photos.I see the photos in my HD. What should I do

I just installed a larger hard drive, and used my Time Machine Backup to transfer my files back to the new hard drive. When I open Iphoto, my thumbnails are there, but they aren't linked back to the actual photos. I see the original photo files in my HD. Is there a way to link the Iphoto thumbnails back to the original files?

Use the Firewire cable and t boot the old Mac's hard drive to the new Mac's desktop and transfer your entire iPhoto folder.
Use Disk Utiliy to erase'format HFS+ Journaled your TimeMachine drive and use the free Carbon Copy Cloner and clone your new boot drive to the external, it's hold option bootable.

Image in Lightroom doesn't match exported image viewed in Photoshop

After all my hard work in Lightroom, I export the image to a folder on my hard drive. When I open this exported image in Photoshop and view it alongside the Lightroom version of its "twin" in Lightroom, there is a significant difference. Why is this? I want to use these images in my books, but my time is wasted if I end up with anything other than what I created in Lightroom. Shouldn't these images match exactly?

Thanks Jao and Michael...the color management idea makes a lot of sense.
Adding to this idea, when I open the Pshop file I get a message about the doc having an embedded profile that doesn't match current RGB working space, and the usual 3 options: Use the embedded profile, Convert color to the working space, or discard embedded profile. No matter which option I choose, none of the opened docs match the Lightroom version.
The color balance is fine, but the colors aren't as vibrant. The Pshop photo is dull and lifeless compared to the Lightroom version. I used Clarity which added subtle brightness, and Vibrance to crank up the color in LR which added wonderful dimensionality and punch to the landscape scene, but the Pshop version has dulled these back down.

Picture and audio not matching in Photo Booth

Hi, can anyone tell me why when I record a video using Photo Booth the audio doesn't match up to the picture? I recently recorded a video and when I went back to watch it I noticed that the video starts and then like 30 seconds later the sound starts. I tried to make another one and it was better but still off, the second one was only off by a few seconds. Is there a reason why this is happening and is there a way to fix it? Thanks for your time.

I have the same issue. Seems if the video is short, like 10-20 seconds the sound and video sync. But, if it's longer than that, then the sound is off and gets worse the longer the video. This is imbarrising since I have no other means and need to send a video to my professor.

Thumbnail doesn't match actual photo

Similar Messages

Maybe you are looking for