Thumbnail for standard wallpapers missing

Hi everyone,
I have a problem with my Blackberry Q10. Today, while selecting a new wallpaper I noticed that a thumbnail image of a factory wallpaper (bb_blue) is missing. In the settings application as well as in the file manager the device only shows a standard icon (flower).
I already restarted the device and removed the battery for some minutes - that did not fix the issue. Is there any way to get the thumbnail back? Since those files a read-only there is no way to re-add the picture etc. The file itself seems to be valid since the wallpaper is still showing if selected. Only the thumbnail is missing.
Thanks for you help in advance.
Best regards,
Stephan

Hey stanft,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Are all the other thumbnails appearing in the wallpaper? Also what version of BlackBerry 10 software are you running? Go to Settings>About to get this information.
Just to clarify, you can set the wallpaper but just the thumbnail is not displaying? Is that correct?
I look forward to your reply.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Similar Messages

PSE4 - No thumbnails for .TIF files (Fuzzy TIF problem?)

My PSE4 newly installed on my Win XP. But, I just catalogued the first 100 of my black-and-white photos into the PSE Organizer. These were all a standard format of 4x6" at 300 dpi gray scale files. But, while the .jpg files show thumbnails in the Organizer, the .tif thumbnails show up as black rectangles. Still these .tifs can be viewed in the PSE editor, and when I resave them as a .psd file, a thumbnail shows up in the Organizer for the .psd. (Oh, an attempt to resave the original file in PSE as .tif didn't help).
Post script -- I just tried to catalogue a few of my more recent 4x6" gray scale .tif files as I described above. I noted that the thumbnails for the .tif files showed up in PSE Organizer for just a second or two, and then promptly changed to black rectangles. Interesting
But I have hundreds of such .tif photos still to be catalogued: (1) Am I going to have to resave each file as .psd, and (2) is there any downside to .psd as long as I'm using Adobe software? I just noted that my online photo processor (Fuji) doesn't accept .psd files.
I saw in the forum about PSE4 encountering the "fuzzy .tiff" problem but couldn't find a full explanation anywhere. I had the impression that not all .tiffs are created equal! I think most of mine were created by Adobe Photoshop 7 that I once had access to. I'm really worried that PSE4 is not going to work out for me.

Check out this thread:
Carol Baidinger, "Photos turn black" #12, 14 Dec 2005 5:55 pm
I don't use Windows, so I don't know if you'll find anything helpful, but I'm sure you'll at least get some comfort from knowing you're not the only person experiencing a problem with TIFF files in PSE 4.0. :(

Preview / Thumbnails for videos not showing

Hello Guys,
I was hoping someone can help me.
I usually import photos from my Canon 400d and iPhone 4 and 3GS and it's been working fine for a long time. A couple of weeks ago, it stopped showing the thumbnails for photos and videos.
My settings for import are to render previews with minimal size (and has always worked great like that). If I try to render standard sized thumbs after import, sometimes it works, and sometimes it hangs with some photos. I can quickly fix that going into "Develop" mode where it creates the preview correctly.
But for videos, because you can't go into develop mode, it just hangs trying to build the previews.
Note that all videos previous to 07-22-2011 show the thumb correctly.
Some more info on my system and the things I've tried.
My system is a Macbook Pro 2.66 i7 with 8Gb DDR3
Lightroom 3.4.1 - 64 bits
Cameras Canon 400d, iPhone 4 & 3GS
I'm running Lion OS X now but I can see in my catalogue that the blank thumbnails start appearing a week before I upgraded.
My catalog is not too big, around 3K photos
I tried getting rid discarding all the 1:1 previews and rebulding them again. I works OK for the photos but the rendering hangs when the get to the videos that have been imported after 07-22-2011.
I checked the video properties and they are all the same as old videos (nothing changed in my iphone) they are .mov files h264 with ACC audio (same as all the previous ones that show the thumbnail correctly)
I tried deleting the .lrdata preview file, and recreating all the previews in standard-size and nothing, then tried with 1:1 preview, but again it hangs when it gets to the videos
I created a new catalog and imported 2 new videos. getting the same result.
Can anyone help?

Thanks Geoff.
I used an app called app zapper to completely delete 3.4 and then installed 3.5 RC and the general speed seems to be a 'little' bit better.
But video seem to screw up everything. Previews are still not rendering for videos and as soon as I get into a mixed folder (videos & images) Lightroom starts to lag badly...

Finder not showing icon thumbnail for some excel documents

I have two MS Excel documents that are, except for the data contained within, virtually identical. One was created as an offshoot of the other.
In the Finder, the original displays a thumbnail for the icon, but the offshoot copy displays the standard Excel icon with the (XLSX) "button" in the lower left corner.
I've tried doing a "Save As" and giving the file a different name. That didn't work.
I've checked Get Info on both, and the only anomaly I see is that the offshoot is a larger file, despite containing fewer tabs and less data. (Curiouser and curiouser.)
Would appreciate any ideas, as I'm stumped.
(Off-topic: Strange, isn't it, that the form on discussions.apple.com for submitting questions doesn't allow Safari to do it's on as-you-type spellcheck? Instead you have to click a spellcheck button on the form itself! ***, Apple?)

Hi Nick,
Try deleting the Finder .plist file.
Go to ~/Library/Preferences. Move the com.apple.finder.plist file to the Trash. Restart your Mac.
~ (Tilde) represents your home folder
Carolyn

Enable video file and image file thumbnails WITHOUT enabling thumbnails for other filetypes

Hello. I am new to Mac and pulling my hair out at some of the limited UI options
I am wanting my image-files and video-files to appear in Finder (desktop etc) as thumbnails
However, I DON'T want PDFs, Excel, Word, PowerPoint files to have a preview thumbnail
Basically how things are now either way, it's very cumbersome visually to distinguish between file-types while cruising around my folders with a quick glance.
if thumbnail previews are on for all, its hard to tell at a quick glance which are PDFs, Excel files vs. images
similarly, the little "pdf" or "xlsx" or "docx" text overlay on these previews is so small and non-color coded as to be useless for quick-glance recognition of which filetype
if thumbnails are off, it's impossible to glance at files in a folder and know which image or video each is without wasting my precious miliseconds clicking on them, or trying to actually read truncated filenames
Here are some possible solutions which I hope somebody knows how to do:
globally enable or disable icon previews by filetype (preferred)
stipulate adding overlayed mini icons to certain filetypes
example: if it's a pdf, show the icon preview, but overlayed on that would be the red Adobe pdf icon/logo roughly a quarter of the size of the file icon (like is possible in Windows 7).
this way image and video previews can be seen at a glance, but having a big red or green or blue logo makes for immediate recognition of filetype
(least prefered but could help) ...somehow change the font color and increase the font size of the overlayed "pdf" "xlsx" "doc" "pptx"currently standard on these filetypes while showing icon preview but ALL are miniscule black text no matter which filetype
I'm quite dumbfounded right now that something for better immediate-glance filetype recognition isn't standard, or at least easily Google'able. All I've found is the Either/Other bamboozle.
Would love it to hear of a solution for this. Thanks all.

Put all of your separate flash movies into one move, and then
use flash to
load the movies into a top section of the flash document.
Your site (this page) sounds like it would be best viewed
entirely in Flash
(at least easiest w/o reloading).
Jon
"zachmundy" <[email protected]> wrote in
message
news:earmgn$q95$[email protected]..
>I have a bunch of flash videos that i've created
thumbnails for. I have
>one
> big cell on the top of the page that displays a video
and a bunch of small
> cells below that hold the thumbnails and descriptions of
other videos.
> When a
> user clicks on one of the videos, I want it to load that
video into the
> large
> cell on the top of the page all without
regenerating/refreshing the page.
> Is
> this possible in dreamweaver? What do I need to code the
thumbnail
> buttons to
> do in order to make this happen?
> Thanks
>

Thumbnail for Lab Spot Color PDF incorrect.

The thumbnail for a Lab spot color in a PDF shows up as black. It is also black when viewed in Preview.
-nt

PDF/X-4 is an ISO printing standard. It is Adobe's recommendation for all printing.
Press Quality produces PDF with live transparency, but all colors are (prematurely) converted to a particular CMYK color space with no ICC profiles (spot colors can be preserved depending upon your Ink Manager settings). You are effectively locked into a particular CMYK printing condition. We do not recommend this!
High Quality Print maintains transparency and some color management. By default it does no color conversions - that's great - but it also doesn't provide all the source profiles by default, only those of placed content that have such profiles associated with them. You could change this to include all color profiles, in which case you are only a small step away from PDF/X-4.
Again, we most strongly recommend PDF/X-4.
- Dov

Can't change home directory for standard users (admin is OK)

I'm can't relocate home directories for standard users. Relocating works fine for admin users.
When a standard user logs in, they get a message (paraphased) saying "the home directory is not available. If it is located on a server, the server might not be online". If I change the standard user to admin, this message goes away, and everything is fine.
I created a standard user
moved the home directory using the terminal as root: mv UserName /otherlocation/UserName
I then went into users and groups, other options and changed the home directory location.
Rebooted, then tried to log in as the standard users.
Next try - Deleted the standard user and created the same user with admin rights. Followed the above steps and everything works fine.
I don't want this user to have admin rights on my system. Any ideas

Hi,
the AFP is has always been switched on. As for the path I believe this to be correct. The path I am using is:
afp://musicserver/Users
I'm not at the server right now so I mat have got the afp and : and / in the wrong order here but they are correct on the server.
This however does not seem to put the a folder in the Users folder. Could it be something to do with my external hard drive? I am using a Mac Mini as our server (not ideal but fine for us, or at least was) this is booted from our external hard drive. This is the main system drive which is where the Users data is also stored. I have tried all possible paths I can thing of from replacing the 'musicserver' with the IP address. I have also tried adding the name of the drive to the path (System) but all does not work.
Are you able to suggest anything I have missed? Perhaps I'm doing the path wrong?
Thanks again
Chris

Process Management for Standard Target Version

Hi All,
I am newbie to hyperion, I am entering values at parent level by taking version type as "Standard Target", Is this possible to create Process Management for "Standard Target" versions? if yes how? Plz help me.
Regards,
Naresh R

I take it you are talking about planning, process management is for "Bottom Up Versions"
From the docs
"Target versions use top-down budgeting. *Manage Process Tasks are not allowed*, and children of target members must be blank (for example, #MISSING) to enable data input at the top level."
Cheers
John
http://john-goodwin.blogspot.com/

The new photos app doesn't show all of the thumbnails for my Photostream photos, how can I make them show?

I recently updated my mid-2010 Macbook Pro 15 inch to 10.10.3 Yosemite and I am now using the new Photos app. My Photostream shows missing thumbnails for more of the recent photos, I let it sit for an hour and they still don't show. Any tips to make the thumbnails show quickly? I have tried disabling photostream and reactivating it which didn't work. The thumbnails do eventually show only if I view each specific photo, but it would take forever to select each one to make the thumbnail show

Hi,
Thanks for that tip and I got as far as that as well with Apple Support but for me the subsequent syncing doesn't work.
I have just returned from another visit at the Apple Store where their top level Genius (if such a thing exists) wanted to see it for himself. Rather worryingly, neither he nor Apple head office has an answer for why this isn't working.
To summarise, I connect my iPhone 6 (all up to date) with my MBA/iTunes via USB cable. The sync tab under the iPhone allows me to sync my photos via USB and I get a dropdown menu to chose from iPhoto or Photos Sync. Both libraries in same location but iPhoto works, but Photos says there are 0 pictures and won't sync...
The Apple genius was going to try it himself tonight at home. He has my number and has promised to phone. In the meantime my question remains. For those of you who do not use the Cloud for storing pictures could you please confirm the sync is working for you as described above. Thanks

Original iPad 2 Wallpapers Missing!!!?!

After recent updates, I have found that some of the original iPad2 wallpapers have gone missing! The blue spotlight wallpaper that I love is no longer displayed as an option in "Brightness & Wallpaper". Does anyone know how I may be able to restore this option? where I may find this wallpaper? Or how I can restore it from my backup?
Note:
I recently changed my wallpaper and when I tried reverting it back to the blue spotlight wallpaper, it was no longer an option.

As you have discovered, updating your device made that particular wallpaper unavailable. I do not know where you can find that particular design. You might want to do a Google search for iPad wallpapers. There are many sites where you can download lovely alternatives. You might even find something similar.

HT1014 I'm working with imovie 08 and converted movie originally from VHS tape to .m4v files imovie wouldn't recognize it. I converted to .mov files and imovie generated thumbnails (for hours) and shows a New Event but there is nothing there. Any help?

I'm working with imovie 08 on Macbook pro OS X and converted movie originally from VHS tape to .m4v files imovie wouldn't recognize it. I converted to .mov files and imovie generated thumbnails (for hours) and shows a New Event but there is nothing there. Any help?

markmc78 wrote:
.. I'm really struggling with the concept of events/clips/projects.
consider usage of a diff. editor.. iMovieHD6, you're entitled for a free downlaod at apple.com:
http://www.apple.com/support/downloads/imovieHD6.html
but IF you're relaxed, opened your mind, follow the bright light, ommmm.. for Events & Stuff:
your intended workflow will add another step of quality-degradition (8mm>>avi>>mp4>>iM08) ..
consider the free tool Mpeg Streamclip www.squared5.com for 'chopping' that 90min beast into pieces..
rename these new chunks, follow advice given on my site:
http://karsten.schluter.googlepages.com/im08changeeventdate
there's the manual..
http://manuals.info.apple.com/en/iMovie08_GettingStarted.pdf
and the most recommended books from Mr Pogue's Missing Manual series..

Flash file for hierarchy Visualisation missing

Hi Guys,
Am getting this error: Flash file for hierarchy Visualisation missing meanwhile have installed the related ABAP Add-on EmbOrgCh 605, have activated the graphical hierarchy visualization, and the Business Function HCM_PD_UI_1.
I also cant seem to find the service in transaction sicf for NAKISA_ORGCHART
Ant tips on this?

You can check the OADP structure and ensure correct evaluation paths are correctly assigned!
Organizational Chart Visualization and the Object and Data Provider (OADP)
SAP provides a default OADP-based implementation class in the Check Standard Organizational Chart Configuration system table. For more information, see Customizing for Integration with Other mySAP.com Components, under Business Packages / Functional Packages Manager Self-Service (mySAP ERP) u2192 Organizational Chart Visualization .
http://help.sap.com/erp2005_ehp_05/helpdata/en/40/0f88eb6ff448aa8597211c15a5a653/frameset.htm

IPhone 5 thumbnails for album artwork incorrect

I've been having a problem with the album artwork that displays as a thumbnail when you open the music app. For all the albums which contain music videos, a snapshot of the video appears to be replacing the normal artwork for the album. However when I open the album to view the tracklist, or actually play any of the songs in it, it displays the correct artwork as it did before the problem arose. So the issue here is simply with the thumbnails that display in the album menu of the music app.
This first started occurring after I attempted to sync my iPhone to my PC through iTunes, after which the thumbnails for the album artwork all disappeared entirely. I unsynced and redownloaded my music only to find that the thumbnails for several albums were still incorrect as I explained above.
Deleting the videos from the albums does not solve the issue, nor does redownloading the album in it's entirety.

This is what I figured out I went back to my itunes 10.7 on my MBP and all my album artwork that was not showing up on my iPhone 5 was showing up in coverflow on my MBP but after closer exam the ones missing from iphone 5 actually were missing from the selected item pane or the drag artwork here area so I downloaded and added my art by going to just the ones that were missing from that or you can get info on selected track and go to art tab and add it there after doing that on the first 25 missing I synced the phone and they all came back. Still don't know how they got stripped out of itunes in the preview but not the coverflow but I guess that's for the Geniuses at Apple to come up with. Apple please don't remove coverflow and Album art people love that dont screw it up
Make sure you stay away from upgrading to itunes 11 if you love album art and coverflow they have been removed and the new interface is really really complicated and very unappealing graphically

Unable to preview Contract Terms for Standard Purchase Order

Unable to preview View Contract Terms for Standard Purchase Order,displays error
We have defined the same contract terms and Document type layouts to documents Contract Purchase Order and Standard Purchase Order.
Created a Contract PO,Attached a template able to preview the contract template in PDF successfully
Created a Standard PO,Attached a template not able to preview the contract template in PDF
Displays the foll error
Problem: The system could not generate the PDF document.
Reason: The system detected an error in the following code/object.
Code: XML
Object: PO
Action: Please contact the system administrator and try again
### Steps to Reproduce Problem ###
Steups
Created a custom XSL-FO template for Contract template and defined it for Standard PO and Contracts PO.
Steps to Reproduce
1.Create a PO,give any category of 100 Qty
2.Click Terms and CLick Author Contract Terms\
3.Select the custom Template ,Click Apply Template
4.Click Preview.
Following error displayed
Problem: The system could not generate the PDF document.
Reason: The system detected an error in the following code/object.
Code: XML
Object: PO
Action: Please contact the system administrator and try again
Please Note:The above scenario works for Contracts PO.
The problem is only for Standard PO
We have reviewed note:454479.1
The file version of POXVCOMB.pls 115.69.11510.28
But we have another test instance this also has the same version , the scenario works fine
So we are confused why this is reproducible only for a particular instance with same file versions
If anyone can suggest a solution pls give me a reply
Already SR is logged for the same -SR 3-1272761221, awaiting reply from support

Please reply if any update on the above query is present.

Enhance screen for standard infotype

I need to enhance screen for standard infotype. I follow docs but nothing happens.
Here is my process by steps:
1. PM01 - select infty number
2. PM01 - generating CI_PXXXX (customer include)
3. create structure for this include
4. create customer screen for this include
5. PM01 - generate objects.
Then I am redirected to SE19 - BAdI-Builder. What should I do follow?
Created screen hasn't appear in se80 (MPXXXX00).
Thank you in advance!

I suggest you place your question in [ERP HCM forum|SAP ERP Human Capital Management (SAP ERP HCM);,

Thumbnail for standard wallpapers missing

Similar Messages

Maybe you are looking for