Thumbnail view as the default setting.

Two related questions.
1) How do I make Thumbnail view in the project panel the default setting for all/new projects? I've set my workspace and keyboard arrangement as my custom layouts, but when I make a new project, it always defaults to list view.
2) In a project I'm already using, when I load it up, it's loading up in list view where as in all old Premiere versions, it would load up as whatever the previous setting was. Am I doing something without realizing it that's making it default back to list view?
Thanks.

It doesn't sound like you're doing anything wrong. And as far as I know, nothing's been changed in this regard in terms of expected behavior. So my first guess is that your preferences aren't getting saved properly. The first test I'd try is to launch PPro, change a pref that's easy to test like Show Tooltips, save/close/relaunch, and check whether tooltips are displayed--or simply go back into Preferences and see if the setting stuck.
If that change to the prefs didn't take, then the next step is to clear the prefs by holding down the Alt key while you launch Pr. Keep holding it down until you see the Welcome Screen pops up.

Similar Messages

How do I change the default setting on the 'view scale'?

I'll try submitting this a second time - it didn't seem to go through the first time.
I have an iMac G5 (OSX 10.4.4.), my first encounter with Apple. I find that the default size that text displays on screen in the wordprocessing application is too small for my eyes (I ain't as young as I used to be ...). The text always displays in what seems to be about font 8 or 10, no matter what size I set the document font (it will print in the size I set, but not display in it).
I have discovered that I can change the display size by using the 'view scale' tab in the lower left corner of the window. Size 140 suits me just fine. Problem is that I have to change the view scale each time I open a new document.
Can anyone tell me how to change the default setting on 'view scale' ?
iMac G5 Mac OS X (10.4.4)

Welcome to Apple Discussions
You can create default documents with the settings you want for each type of AppleWorks document. I wrote a user tip, New, blank documents with your settings, that details how to do this.
Peggy

Can I over-ride the default setting in Organizer to allow sorting photos by filename ?

I am converting slides from the 1970's and 80's to digital files and using PSE 8 to Organize them but it is important to me that they stay in the order of the file name I give them and NOT "Date: newest first or last" because it would seem that PSE, in the absence of metafile information, uses the date and time I uploaded the file to the Organizer as the "Date:". ACDSee has a much more sensible arrangement in giving me full control of how my photos are sorted. I am being driven to using ACDSee as the organizer and PSE as the photo editor, a not very convenient arrangement. So my question is, "Can I over-ride the default setting in Organizer to allow sorting photos by filename ?"

The type of file system that you're trying to set up, is actually done better by creating you own file heirarchy in Windows, and then viewing by import batch. For example; you might create a top level folder "My Slide Scans", then perhaps, "My son John". So, the scans of john all go in the same folder, you import the folder in one batch, and you're where you want to be.
That said, PSE will fight you at every turn to do this, since with the scanner hooked up with PSE, PSE is going to want to store your photos in "scanned photos" and import them as you scan them.
I woud suggest this. After the scan and import, use PSE to move the photos to their final destination folder, say " Hawaii 1994", and create a tag of the same name". Then when you're done scanning photos of this event, use the tag to view all the scans at once. Then, delete all the photos from the organizer. (Yeah, sounds radical I know). Take heart! All you've gotta do then is to reimport the whole folder. All the same name photos will be in one import batch. And with all the photos of any given topic in one folder, you'll be able to also use Windows Explorer in any number of modes to view the photos outside PSE.
Keep in mind you can rename batchs of photos by selecting them, or by import batch or even tag, then "Ctrl. > Shift > N" will bring up the name change dialog box.
This technique is quite contensious, but, it makes a whole lot more sense than storing all your photos in the "My Photos" folder on the "C:/" drive where any viral or malware hiccup might cause the necessity of a reformat, which could cause the loss of years of work.
If a name search is a priority, that would be "Ctrl ."Shift" > "K" then type in whatever your heart desires.
Caution: Before attempting a delete/ reimport manuver, Alway, always, write the tag and file info to the photo. "File" >"Write Tag and Properties Info to File".
I always am quite adamantine about suggesting that you do NOT use the same physical HDD that contains Windows to store your photos, that's just asking for trouble. HDDs are quite cheap nowadays, and they're worth every penny in piece of mind. Plus to use a storage ("Volume") drive, you have to create your own file heirarchy anyway, so that leads right back to the beginning of this discussion.

How do you change the default setting in the motions tab?

Greetings!
We have two macs in our editing suite. Both are running FCP studio 2. One of the macs has a default setting for the drop shadow of 2 in the motion tab. The other mac has the default setting of 10. How can I change the default settings (not as a favorite) so that when I open a clip in the viewer the default setting will always be my preference (1.5) instead of the standard 10. I also want to change the opacity to 90% as the default.
Thanks for your help.
YmirJr

Larry, et.al.
Below is a step-by-step process for changing the default font in CS6, Illustrator, Mac, Mountain Lion, 10.8.2.
There are several additiional steps needed to make this work.
Please feel free to us this for other inquiries.
To Change Default Font in CS6-Ai-Mac-Mountain Lion, 10.8.2
On desktop menu bar, hold down Option key, go to GO, pull down to Library.
Open Application Support, ~ Adobe, ~ Adobe Illustrator CS6, ~ en_us ~ New Document Profiles
Six choices appear (you can change each that you use, one at a time)
Example: Double click Basic RGB.ai
A Basic RGB.ai blank document window opens
In Menu Bar, go to Window ~ Type ~ Character Styles
A sub-window opens with (Normal Character Style) highlighted in Blue
Double click the highlighted name and another sub-window opens
In left of this window, choose Basic Character Formats
Change to desired Font Family, Font Style, Size, etc.
Click OK when finished, widow disappears to reveal Character Styles sub-window
Click anywhere on the blank document in order to get option to Save
Save the document
Close Character Styles sub-window
Quit Illustrator
Re-launch Illustrator CS6 ~ New document … check Font tool to confirm changed default font
Hope this works for other "Lost Adobe Souls" like myself.
George

How to display the thumbnail view of the documents in Sharepoint Document Library

Is there a way that we can have the thumbnail view of the documents that are uploaded in SharePoint Document Library. We have thumbnail feature in Picture Library but can we have the same in Document Library too. Documents includes Words,Excel,PDF.
Any Suggestions Please

Hey Mike,
Good post, I'd be curious to see if anyone has used the GD Picture SDK with SharePoint, maybe there would be some sample code.
Hey Kukdai,
Developing your own solution would potentially provide a better way to accomplish your task, but before setting out on that long road you may want to try the simple customization, it's less time consuming and it will help gauge your customer's interest and
support.
Also, there is a wealth of open source code for SharePoint available on CodePlex, you might want to check that out as well. Here is the linK:
http://www.codeplex.com/
Also, here is an interesting project to consider for your task:
http://enhancedpicture.codeplex.com/
I hope that helps!
Tom Molskow SharePoint Architect - If I solved the issue please propose my reply as the answer - Thanks!

How to remove "all day" as the default setting in iCal?

How to remove "all day" as the default setting in iCal? The iCloud calendar works by double-clicking but the local behaves differently.

Hello Valerie,
the default - "all day" or "time based" - depends on the view in iCal. In month view the default is "all day",
in week view or day view it is a time interval, if you use "File -> New Event". If you add the event by double clicking into the calendar, it will depend on the section you are clicking - in the all day section you will add an all-day event, in the time-grid you will enter an event with start-end time.
Regards
Léonie

Is there a way to have iCal notify of events by email as the default setting? Now I get Message with Sound as the default. I have OS 10.9.2/Mavericks.

Is there a way to have iCal notify of events by email to myself [My Card in Contacts] as the default setting? Now I get Message with Sound as the default. I have OS 10.9.2/Mavericks.

Is there a way to have iCal notify of events by email to myself [My Card in Contacts] as the default setting? Now I get Message with Sound as the default. I have OS 10.9.2/Mavericks.

How do I change the default setting from Pages to MS Word for Mac?

How do I change the default setting from Pages to MS Word for Mac?

https://discussions.apple.com/message/13008817#13008817

How do you change the default setting for RTF documents from TextEdit to MS Word

How do you change the default setting for RTF documents from TextEdit to MS Word, I download forms from the Canadian government and they use RTF as a standard, they are supposed to open as MS Word documents (Yes I have Office for MAC 2011) but when download the document it goes to TextEdit which messes up the form format. I can down load it right click and go "open with" MS Word but how can I get the default chnaged to save this step.

richr604 wrote:
Thanks I knew this, I like Safari as I want to keep everything MAC, but if I use Firefox the documents open in MS Word straight away, I was just curious if there was some setting I could change?
In Firefox > Preferences, click the Applications tab. If RTF is there, use the pulldown menu in the Action column to pick MS Word. If RTF is not there, there are instructions here for how to add file types.

Change the default setting for report painter reports.

HI All
Can we change the default setting in SAP/R3 in the report painter reports for the selection screen options?
If yes,Please let me know how we can change the default settings.
Thanks in Advance
Best regards
Venu

HI
We have a report developed in the report painter for profit center accounting and we have selection screen for this report.
Few of the selection screen fields parameter are set by default and we need to change the default setting for the selection screen fields parameters.
How and where do we set or change the default parameters for the selection screen ?
Thanks in advance
Best Regards
Venugopal

When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using Micro

When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using Microsoft Word 2007 to open these documents?
== This happened ==
Every time Firefox opened
== about a few weeks ago - I had tried to open some docuuments saved on a mac, my PC (which runs Windows 7), used word pad to open these, and this seems to have changed the default settings somehow.

See this:
[http://support.mozilla.com/en-US/kb/Managing+file+types]

I have two email accts. set in my iphone,one is the default setting.when I send an email it shows that it was sent from a 3rd email acct. that I no longer use?I deleted it from my phone?

I have two email accts. set in my iphone,one is the default setting.when I send an email it shows that it was sent from a 3rd email acct. that I no longer use,and had been deleted from my phone?

Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

How can I set the DEFAULT setting on an effect to be MY default setting, not Garagebands default setting?

Hey
I usually use the same settings of reverb for most vocals I record (Just a small amount) and I have this saved as a setting, but is there anyway to make MY setting be the default setting whenever I add reverb and not be Garagebands default reverb setting?
This is so i dont have to go and select my setting each time?
I hope this makes sense.
thanks

This is more for mixing after all recording has been done. I generally record vocals with no effects on at all apart from a small amount of compression as its easier to hear errors in takes then. Currently its quicker than Cmd+D and copy/pasting into it. But still not as "Fast" as I would like by being able to choose myself what I always want as the default setting.

How can I opt out on the default setting for a split window in Firefox 3.6.12 ?

Since I upgraded to Firefox 3.6.12, the page opens up with two vertically divided panes. Each pane displays a different bookmark. The left pane is generally only about an inch wide and can only be expanded to about 3 inches wide. In that mode, it is pretty much useless and only provides a distraction. How can I opt out on what appears to be the default setting for a split window with two vertical panes.
At this point, I am discontinuing using Firefox in favor of Safari because of this change in the default window.

Opening in the side bar is the default for bookmarks that are created via a link or button on a website.
You can check the Properties of a bookmark via the right-click context menu in the side bar (Ctrl+B; Cmd+B on Mac).
In the Bookmarks Manager (Bookmarks > Organize Bookmarks) you can click the More button in the Details pane at the bottom right.
Make sure that "Load this bookmark in the side bar" is not selected.

Change the default setting of 'Match entire cell contents' in Excel 2007

Hi,
I am using Excel 2007 on Windows 7 and need to search the contents of cells in a large spreadsheet on a regular basis.
When I open the Find and Replace dialogue box, the Match entire cell contents option is always checked. I deselect this to search for the cell contents I require. If I then enter any values into a cell and try to search for another cell,
the Match entire cell contents option is activated again.
Is there a way to change the default setting for this checkbox to be off rather than on?
Thank you,
Nitin Suneja

Hi Chad,
I will check if it is something localised to the spreadsheet itself as it is shared by a number of people and all are having this problem with this sheet.
Thanks for looking into this for me.
Nitin.

Thumbnail view as the default setting.

Similar Messages

Maybe you are looking for