Thumbnails and comments are not loading on youtube

Since I updated my mac book air to Yosemite everytime I go on youtube the thumbnails don't show at all and the comments never load, I don't know what is the problem. I've checked adobe flash to see if its updated and everything. Please help.

Welcome to the Apple Community.
Contacts
First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.
Calendars
First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

Similar Messages

  • I have a HP-6210 Laptop with Windows 8.1 ... and Videos are not playing from youtube espn etc

    I have a HP-AMD A4-6210 Laptop with Windows 8.1 ... and Videos are not playing from youtube espn etc
    This question was solved.
    View Solution.

    Hi,
    Try a clean installation of the flash plugin/activeX as follows.
    First, download the Flash uninstall utility on the link below and save it to your Downloads folder.
    Flash Player Uninstaller.
    When the download has completed, close all browser windows, open your Download folder and run the uninstaller.  After this has completed, restart the notebook.
    When windows has reloaded, download and install the latest version of Adobe Flash.  Note: You may want to deselect the option to include McAfee Security Scan Plus before downloading.
    When the installation has completed, restart the notebook.
    If the above doesn't correct the issue, then try the following.
    First of all, download and run the Shockwave uninstaller on the link below.
    http://fpdownload.macromedia.com/get/shockwave/uninstall/win/sw_uninstaller.exe
    After this has completed, restart the notebook.
    When windows has fully reloaded, download and install the latest version of Shockwave on the following link.
    http://get.adobe.com/shockwave/
    Again, after this installation, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • In fire fox and google chrome CSS and images are not loading

    I am facing problem with jrun, In IE-8 application is working fine, but in FireFox and Google chrome CSS and Images are not loading.
    in fire fox and google chrome requests are Aborted.
    thanks
    Ashok Gadiparthi.

    Check if Style Resource Readers SharePoint group has permissions on the site, permissions to the style library and make sure that this library provides Style Resource Readers with restricted read.
    If you don't see Style resource readers on the site, go to that library and set that permission.  you could also just load your installation media to a folder, and execute on setup.exe, select repair option.  This second option of the installation
    media is the cannon vs. flyswatter approach though, but it will work
    Stacy Anothersharepointblog.blogspot.com

  • Css and images are not loading in SharePoint website

    Scenario:-
    System Configuration- Windows server 2008 R2, SharePoint Designer 2010, SP server 2010 all are in Local Machine.
    1. I had reset the Windows server 2008 R2 password and opened SharePoint Designer 2010.
    2. Opened previous working site and found error- services unavailable- HTTP Error 503. The service is unavailable
    3. For this issue, I reset  (as I reset for windows server) the Identity password in App pool for "SharePoint Central Administration v4" application.
    4. The error "Service Unavailable" got vanished.
    But encountered new problem - .css and images are not loading. 
    5. I re run "Product Configuration wizard" with below steps:-
    A) Do not disconnect from this server.
    B) No, this machine will continue to host the website
     Still Problem persisting.
    What tried:-
    1. Resetting IIS Server.
    2. Restarted SharePoint Admin Services from "Service window".
    3. Recycled App pool.
    Just do let me know for further information.
    I have Checked so may forum and sites but no solution :(
    Looking for excellent resolution :)

    Check if Style Resource Readers SharePoint group has permissions on the site, permissions to the style library and make sure that this library provides Style Resource Readers with restricted read.
    If you don't see Style resource readers on the site, go to that library and set that permission.  you could also just load your installation media to a folder, and execute on setup.exe, select repair option.  This second option of the installation
    media is the cannon vs. flyswatter approach though, but it will work
    Stacy Anothersharepointblog.blogspot.com

  • I have purchased apps for my ipod touch and they are not loading properly.  They appear on the screen, however when I touch them, they do not load and bounce back to the main screen.  Any suggestions on how to fix?

    I have purchased apps for my ipod touch and they are not loading properly.  They appear on the screen, but when you touch them, they do not open and bounce back to the main screen.  Any ideas on how to fix?

    Try the basics from the manual:
    restart.
    reset.
    restore.
    iPod touch User Guide (For iOS 4.3 Software)

  • I play pogo gams and they are not loading im always having trouble with firefox

    every time i try to play my pogo games the games are not loading and i keep losing my interent connection. why do i always have trouble with firefox this is getting very annoying
    since i pay to play pogo games

    how can this be fixed

  • BPC 7.5: Node ID and description are not loading

    Hi,
    I'm working on BPC 7.5 and SP04.
      I'm working on BPC 7.5 and SP04.
    I have G/L account hierarchy in BI system. I tried to load G/L account master data attr/text into BPC and successfully loaded but hierarchy node ID's and description are missed. I followed the below steps.
    1) Loaded master attr,text and hierarchy data from ECC to BI and activated the master data.
    2) Used the below transformation and conversion file.
    3) Selected the hierarchy in selecetion in data package while loading data into BPC.
    Transformation File:
    *OPTIONS
    FORMAT = DELIMITED
    HEADER = YES
    DELIMITER = TAB
    AMOUNTDECIMALPOINT = .
    SKIP = 0
    SKIPIF = 177000
    VALIDATERECORDS=YES
    CREDITPOSITIVE=YES
    MAXREJECTCOUNT=
    ROUNDAMOUNT=*MAPPING
    *MAPPING
    ID=ID
    *CONVERSION
    ID=ACCT_ID_MD.xls
    G/L Account compounded to chart of accounts (10+4) and has total length 14 and hierarchy node ID's have length 32.
    I used the below conversion file.
    External                                                         Internal
    01000000??????                               ??????
    0100000???????                               ???????
    010000????????                               ????????
    0000000000000000000000000000????         ????
    000000000000000000000000000?????         ?????
    00000000000000000000000000??????         ??????
    0000000000000000000000000???????         ???????
    *                                                      js:%external%;
    Please suggest anyone how can I load node ID's and description.
    Note: I followed the same above process for 0PROFIT_CTR and 0COSTCETER and successfully loaded master, text and hierarchy data.
    Thanks
    Prasad

    Hi,
    Use the below code in CMOD and change the hierarchy name.
    *&  Include           ZXRSAU04
    CASE i_datasource.
    Global Declaration *********
    FIELD-SYMBOLS: <FOLDERT> TYPE ROSFOLDERT,
                   <HIENODE> TYPE ROSHIENODE.
    CONSTANTS : C_NODE VALUE 'C'.
    **Enhancement will be used to suffix Z to all cost center hierarchy node
    **This will be further used in BPC to load hierarchy without error.
    WHEN '0COSTCENTER_0101_HIER'.
    LOOP At C_T_HIENODE3 ASSIGNING <HIENODE>.
       IF <HIENODE>-IOBJNM = '0HIER_NODE'.
       CONCATENATE 'Z' <HIENODE>-NODENAME+4(20) into <HIENODE>-NODENAME.
       ENDIF.
    ENDLOOP.
    LOOP At C_T_FOLDERT  ASSIGNING <FOLDERT>.
      IF <FOLDERT>-IOBJNM = '0HIER_NODE'.
      CONCATENATE  'Z' <FOLDERT>-NODENAME+4(20) into <FOLDERT>-NODENAME.
      ENDIF.
    ENDLOOP.
    LOOP At C_T_HIENODE ASSIGNING <HIENODE>.
      IF <HIENODE>-IOBJNM = '0HIER_NODE'.
      CONCATENATE  'Z' <HIENODE>-NODENAME+4(20) into <HIENODE>-NODENAME.
      ENDIF.
    ENDLOOP.
    ********End Of Code
    **Enhancement will be used to suffix Z to all profit center hierarchy node
    **This will be further used in BPC to load hierarchy without error.
    WHEN '0PROFIT_CTR_0106_HIER'.
    LOOP At C_T_HIENODE3 ASSIGNING <HIENODE>.
       IF <HIENODE>-IOBJNM = '0HIER_NODE'.
       CONCATENATE 'Z' <HIENODE>-NODENAME+4(20) into <HIENODE>-NODENAME.
       ENDIF.
    ENDLOOP.
    LOOP At C_T_FOLDERT  ASSIGNING <FOLDERT>.
      IF <FOLDERT>-IOBJNM = '0HIER_NODE'.
      CONCATENATE  'Z' <FOLDERT>-NODENAME+4(20) into <FOLDERT>-NODENAME.
      ENDIF.
    ENDLOOP.
    LOOP At C_T_HIENODE ASSIGNING <HIENODE>.
      IF <HIENODE>-IOBJNM = '0HIER_NODE'.
      CONCATENATE  'Z' <HIENODE>-NODENAME+4(20) into <HIENODE>-NODENAME.
      ENDIF.
    ENDLOOP.
    ********End Of Code
    ENDCASE.
    Thanks
    Prasad

  • Thumbnail size images are not loading

    On some sites such as Myspace or Facebook or even the Images search on Yahoo, the thumbnail size do not load up at all. The browser will take longer than usual to load the page but when it finishes loading the images show up as a box with a question mark.
    Can somebody tell me what I can do to prevent this from happening? It's becoming really frustrating when I do searches.

    I've had this problem for the entire year that I've had my Mac so far. I thought it was a normal thing until I used Safari on a few other Macs. Everything else on my Mini is nice and fast. The same pages render in blazing speeds when I use Firefox or Opera when compared to Safari. Anyone have a solution?

  • I am using Beta8 and photos are not loading correctly on Facebook, Meetup and my website on Weebly. .

    When you click on photos in Facebook albums- they are black. I can reload a page and they appear. Same for Member -photos on my Meetup hiking page. Also- Weebly website service: some of the photos in my portfolio are black. You can click on them and they will load ok.
    Besides this- A-Ok.

    This is what i Found. There are dead spots all over the iPad Screen. If your buttons are in certain spots at certain times they will not work. if you center them and space them handsomely next to each other you will see that they work perfectly. it only took me 8 hours to figure this out. I am surprised nobody else caught this.
    drotar
    http://www.drotardesign.com

  • Websites Such as Google, Kongregate, Facebook, and Ebay are not loading correctly, they Load as if it were a layout for an older mobile internet browser.

    I recently Did a windows update to install Internet explorer 9. When my Computer Restarted, I opened Mozilla, because it is my preferred Browser, and pages such as the ones stated above started loading with just text with no layout. I cleared the cache, reverted to defaults, and nothing seemed to work, if anything, i just want the pages to load, because i don't want to change my browser preference.

    Can you attach a [http://en.wikipedia.org/wiki/Screenshot screenshot]?
    Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
    Some websites may not recognize the new layout of the Firefox user agent and interpret as being a mobile device. In the past there used to be more info present in the UA
    * Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0) Gecko/20100101 Firefox/4.0
    * Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.15) Gecko/20110303 Firefox/3.6.15
    Reload a web page and bypass the cache with:
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)

  • Safari, FireFox and Chrome are not loading webpages in OS X Lion

    I have been unable to load certain webpages in any of my web browers that I have installed. This includes Safari, FireFox and Chrome. While I am able to load sites such as ESPN.com without any issue, I cannot connect to Facebook.com or CNET.com. I have tried clearing by browser history and cache, turning off and on my wifi and restarting my computer. Any ideas of what the issue is and whether there is a relatively simple fix that does not require waiting for an updated software release from Apple?

    Reset Safari more often.
    From your Safari menu bar click Safari > Reset Safari
    Select:   Clear History  (also empties the cache)
    Deselect the remaining boxes then click Reset.
    Quit and relaunch Safari to test.

  • HT4759 Contacts and Calendar are not loading on my new iPhone 5S

    Cannot get contacts or calendar to update on my new iPhone5s

    Welcome to the Apple Community.
    Contacts
    First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
    Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
    If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.
    Calendars
    First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
    Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
    If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

  • Iphoto and itunes are not loading in idvd

    Hello, I'm trying to burn a dvd. I select Media and from the 3 possibilities- Audio, Phot and Film- i can only access Film. When i click on Photo, it says "open i photo 5 or later to see iphoto library, when i click Audio, it says the same thing. When i was working on a projeckt in idvd on my external HD, both Audio itunes and Photo iphoto were available. Anybody have simple suggestions? thanks

    Check if Style Resource Readers SharePoint group has permissions on the site, permissions to the style library and make sure that this library provides Style Resource Readers with restricted read.
    If you don't see Style resource readers on the site, go to that library and set that permission.  you could also just load your installation media to a folder, and execute on setup.exe, select repair option.  This second option of the installation
    media is the cannon vs. flyswatter approach though, but it will work
    Stacy Anothersharepointblog.blogspot.com

  • Images are not loaded in KM Navigational iViews

    Hi All
    I have uploaded documents & folders in Content Management.
    Created KM navigational iViews, assigned to pages, worksets & role.
    Role has been granted to other users, and when they click on the role, images of documents types are not loaded. When I run the properties(Image) path its gives a portal exception.
    But when I login I see all the images loading perfectly.
    Please advise on this. Its an emergancy.
    Thanks to all.

    sk wrote:
    Hi,
    I'm facing problem while deploying apex listener in glassfish 3.0.1. So far I have done
    - Installed 10g XE
    - Installed APEX 4.0
    - Unlocked APEX_PUBLIC_USER account and reset the password
    - Installed Glassfish 3.0
    - Created admin and manager users
    - Deployed apex.war
    - Created "i" folder in C:\glassfishv3\glassfish\domains\domain1\docroot and copied images from APEX directory
    - Completed listener configuration http://127.0.0.1:9090/apex/listenerConfigure
    When I try to open the Apex page http://127.0.0.1:9090/apex images and css are not loaded. Already I have spent a day, went thro documentations and I couldn't figure out what I'm doing wrong. Can someone help on this please?
    SKHi,
    I have the same problem. But , under user "root" everything works fine, under user "oracle" images are not loaded. User oracle are owner folder where glassfish installed.
    And one more problem. Apex Listener doesn't understand role Admin and user adminlistener. Every time I have recieved message : access denied.
    Please, help me ((
    Sorry for my bad english,
    Egor Karmanov
    Edited by: 843328 on 10.03.2011 2:41

  • Images are not loaded in glassfish

    Hi,
    I'm facing problem while deploying apex listener in glassfish 3.0.1. So far I have done
    - Installed 10g XE
    - Installed APEX 4.0
    - Unlocked APEX_PUBLIC_USER account and reset the password
    - Installed Glassfish 3.0
    - Created admin and manager users
    - Deployed apex.war
    - Created "i" folder in C:\glassfishv3\glassfish\domains\domain1\docroot and copied images from APEX directory
    - Completed listener configuration http://127.0.0.1:9090/apex/listenerConfigure
    When I try to open the Apex page http://127.0.0.1:9090/apex images and css are not loaded. Already I have spent a day, went thro documentations and I couldn't figure out what I'm doing wrong. Can someone help on this please?
    SK

    sk wrote:
    Hi,
    I'm facing problem while deploying apex listener in glassfish 3.0.1. So far I have done
    - Installed 10g XE
    - Installed APEX 4.0
    - Unlocked APEX_PUBLIC_USER account and reset the password
    - Installed Glassfish 3.0
    - Created admin and manager users
    - Deployed apex.war
    - Created "i" folder in C:\glassfishv3\glassfish\domains\domain1\docroot and copied images from APEX directory
    - Completed listener configuration http://127.0.0.1:9090/apex/listenerConfigure
    When I try to open the Apex page http://127.0.0.1:9090/apex images and css are not loaded. Already I have spent a day, went thro documentations and I couldn't figure out what I'm doing wrong. Can someone help on this please?
    SKHi,
    I have the same problem. But , under user "root" everything works fine, under user "oracle" images are not loaded. User oracle are owner folder where glassfish installed.
    And one more problem. Apex Listener doesn't understand role Admin and user adminlistener. Every time I have recieved message : access denied.
    Please, help me ((
    Sorry for my bad english,
    Egor Karmanov
    Edited by: 843328 on 10.03.2011 2:41

Maybe you are looking for