Thumbnails different to actual image

I have recently imported some pictures into an existing project and was updating my images in an album. After I finished, I went to another album contained within the same project. It took a while for the thumbnails to catch up and change to their respective images. However, there were about 8 images that didn't change. When I select the thumbnails, the correct images come up on the screen but the thumbnails have not changed. When I go into the actual project the same happens. The two different albums are wedding albums. So in album two, some of the thumbnails show images from album 1. Even though the pictures are still there and I have lost nothing, I would still like to view the correct thumbnails when searching. Any help.
PS - I have already tried to generate new previews but nothing happens.

I have resolved this issue by deleting the thumbnails and thumbnail database manually inside of the Aperture Library - you can get at the files by right clicking on the aperture library in finder and then using show package contents and then doing the same thing again on each project that is damaged.. The thumbnails are in 3 files AP.thumbs, AP.minis AP.tinies
After doing this when you restart Aperture let the thumbnails rebuild COMPLETELY after clicking on the project before doing ANYTHING.
Your milage may vary. Make sure you have a backup incase you really screw something up
RB
Message was edited by: rwboyer

Similar Messages

Jpeg looks different than actual Image in Photoshop (saving Issues)

My image in photoshop has thin lines, but when I save it, the jpeg shows the image with very thick dark lines, looking not like the image in photoshop. Why does it do this? How can I stop PS from doing this to my image? I want the image to look as it does in Photoshop when I save it as a Jpeg.
This is in Photoshop CS4
As it should be (using the snipping tool (I can't use the snipping tool as my only option, because it will only capture the size as it is on the screen, not the actual dimensions in Photoshop)
Saved as a Jpeg; the lines are thicker, and now there is little variation in line weight
Does anyone have a solution? Any help would be greatly appreciated.

Just one comment... Your lines in your screen grab are NOT thinner, they are simply a good bit lighter.
You should try to use the proper terminology, because you will end up realizing, when C.Pfaffenbichler helps you get to the bottom of your problem, that you likely are experiencing a gamma/color-management issue causing your pixels to be displayed far more lightly in one case than another.
Besides your color settings in Photoshop, it will also be helpful to know what color profile is associated with your monitor at the operating system level.
-Noel
P.S., I don't know what result you're going for, but the JPEG with the darker lines looks a lot better on a calibrated display. The screen grab seems too light.

Larger image changed, but smaller thumbnails still show old image

Hi,
I want to change the image for my podcast. I added the new image to my server and added an image tag to my rss file pointing to it. Now in the iTunes store, the larger thumbnail shows the correct image, but the smaller thumbnails in the store show the old one. Do I just need to wait longer, or is there something else I have to do?
Feed = http://feeds.feedburner.com/walkingdeadcast
Thanks!
Jason

For some reason the thumbnails in the Search results take longer to update than the image on the Store page. They're both drawn from the same tag in your feed, so there's nothing you can do except wait: it will probably sort itself out in a day or two.
Edit: actually I just searched on your podcast title and the search results showed the same image as the main Store page.
Another edit: I assume you are talking about the Search results, not what you see when you subscribe? Those images are embedded in the media files, not referenced in the feed. I just downloaded one of the episodes on subscription and I see it has a different image. In order to change this you will have to embed new images in every episode and re-upload them - see here.

How do I display thumbnails for subfolders with images in Finder?

Hello. I've settled in quite nicely with OS X but I find there's one thing I couldn't replace with a better alternative from XP and I've looked extensively for a solution but with no luck, so I figured I'd ask.
It's best described with a picture (http://i38.tinypic.com/2j2i1rr.png). All those folders have images in them (at their root, not in subfolders). Instead of the generic folder icon, I'd like a thumbnail of the images in the folder (like this: http://imgsrv.worldstart.com/ct-images/folder-pic-blank1.jpg). The closest I've gotten to this is ticking "Show icon preview" in Finder's view options menu, but this only displays the thumbnails when I actually open the folder which is a bit of a problem when you have 200+ folders and you're looking for a specific one. The only thing remotely like this that I've found is FileBrowse (http://www.filebrowse.com/index.html) but it's too fat and slow to be of much use.
Thanks for any help you might be able to provide.

baltwo: Thanks for the tip, I didn't know how easy it was to set up custom icons in OS X. In this case it's a difficult solution because it will have to be done by hand for every single folder, which is a problem if I'm going to have these in two places. I'm new to Automator but there doesn't seem to be a way to have it; 1) Select all the folders in a directory. 2) Copy the first image in each folder to the clipboard and have it use that image as each folder's icon.
Barney-15E: I know it sounds moronic, but yes. I've tried iPhoto but it's not a very good solution in this case. My folder structure is like this:
Root -> 282 image folders with 10 to 60 pictures in each.
All I really need is the ability to see at a glance what each image folder has without opening each individual folder. The folders are numbered sequentially (1-282 in this case) rather than by proper names, so this is the most efficient way.

Generating full-size image from thumbnail using BLOB DB images

Hi all,
Assuming that all necessary steps were taken in other posts and tutorials to display images on a web page from BLOB objects stored in an Oracle 10g DB, how is it possible to set the size of the created images (from the servlet that creates the image file from BLOB) so that it is smaller than the actual image in the DB. the user would then have to click the image to open the full image.
would this be done by possibly creating 2 servlets, one that displays a smaller version, and one that displays the actual image?
i don't see how this can be done since the url property of each image is bound to the url of the servlet. If the thumbnail has a url pointing to image produced by thumbnail servlet, would i assign an action handler for clicking the image that redirects to a url given by the full size image servlet? or should i use an image hyperlink instead?
any help is always appreciated!

Suggest you take this one step at a time.
1. Create a database and store your images in it. (Or write the upload mechanism if you need it).
2. Display your full size images.
3. Display your full size images as thumbnail size. (Performance will not be good but you'll have results.) Creator allows you to set image size independantly of the size of the underlying image.
4. Modify the servlet you wrote in step three to optionally reduce the resolution (or quality) based on an input parameter.
References: Steps 1 -3
http://blogs.sun.com/sakthi/entry/how_to_upload_and_retrieve
Step 4
http://java.sun.com/developer/onlineTraining/javaai/jai/RenderableScaleFrame.html
Or possibly some other library.

Why the image I get is different from the image I see on SpeedGrade???

the image I get is different from the image I see on SpeedGrade???
As the pic shows, the left one is what i get from speedgrade, and the right one is what i get after rending it out.

Welcome to the world of the QuickTime Gamma Shift. In short: Apple is dispaying your video wrong. It actually happens with there own software (Final Cut Pro) as wel...
Google for "QuickTime Gamma Shift" and see if you can find a workflow that works for you.

Preview and Actual Image

When I am adjusting or filtering an image I get a preview box and the actual image changes behind the box to however I put the settings to, so I use it to see what its going to look like. But when I press "ok" it turns out completely different than it was in the previews. Why is this?

If you have other than 100% view you can get a view that is not true. Try this with 100% view and see if it preview and actual image.

How can I drag an image from a page in Safari to the finder and have it be saved as an *actual* image instead of a webloc?

Safari used to let me drag an image from a webpage to the finder and have the dragged file be saved as an actual image but now all that's saved is a webloc file. I want the image saved, not a reference to the image's URL - do I now have to always use "save as" to save it?
I can understand Safari creating a webloc file if I dragged the site icon from the location bar to the finder, but to make the default behavior for dragging things that are parts of a page (not the page itself) as webloc files seems like a HUGE step backwards for usability.
Does anyone know if there's, say, a key to hold when dragging to avoid saving a webloc file or a defaults command or something to make Safari revert back to sane draging behavior?

Good questions... I'll have to try and figure out when the problem first happened - I was thinking it was when I upgraded to Safari 5.1.4 but that might not be the case... I'll try your suggestions to see if any of them eliminate the problem (I have restarted recenlty and that didn't fix it) but I'll try repairing permissions,etc. Thanks!
hmmm... Mcbuffy: are you implying that you *don't* get the webloc when dragging an image out of Safari and that this isn't a caused by change to Safari but is a big/conflict in mine?

Inserting or embed and image into cfmail output from a database-stored path to an actual image.

I am trying to insert or embed and image into cfmail from a database-stored path to an actual image. The actual JPEG image is stored in a folder called "images_personnel". The path to the image under the column titled photopath is stored in my database table as "/file/images_personnel/28.jpg". Displaying the image on the screen renders without a problem, embedding the same image as part of a cfloop query does not insert/embed the image into an email. All of the other output of the same cfloop displays and emails just fine. However none of the photos of each personelle show up. What an I doing wrong?
My code is below:
<cfquery name="Staffreport" datasource="master">
Select staffreport.*, name.personnelid, name.email, name.last, name.noiid, stafflt, CONCAT(name.fname,' ',name.middle,' (',name.last,')') AS teammember, CONCAT(name.fname,' ',name.middle) AS teammember2, concat(name.photopath,'',name.photo)as hisphoto, stafflt.*, trim(concat(ltfname,' ',ltmiddle)) as LT from Staffreport, name, stafflt
where 0=0
and stalt = '#Session.user_id#'
and ltid = '#session.user_id#'
and staweekbegin = <cfqueryparam value="#form.staweekbegin#" cfsqltype="cf_sql_date" />
AND staweekend = <cfqueryparam value="#form.staweekend#" cfsqltype="cf_sql_date" />
AND stapersonnelid = personnelID

AND CITY = 'richmond'
AND STATUS <> 'd'
AND STATUS <> 'T'
AND type = 'personnel'
Group by personnelid
Order by teammember
</cfquery>
<cfmail>...
<cfloop query="staffreport"><br />
<table width="90%" border="0" cellspacing="2" cellpadding="4" align="left">
<tr>
    <td colspan="2" align="center" valign="top" nowrap="nowrap" bgcolor="cccccc"><strong><font color="black"><cfif #staffreport.last# eq ".">#Ucase(Staffreport.teammember2)# <cfelse>#Ucase(Staffreport.teammember)#</cfif> - ID: <cfoutput>#Staffreport.noiid#</cfoutput></font></strong></td>
</tr>
<tr>
    <td align="left" valign="top" nowrap="nowrap" bgcolor="#000000">Name:</td>
    <td>#Staffreport.teammember#</td>
</tr>
<tr>
    <td bgcolor="E6E1FD">Photo:</td>
    <td bgcolor="EBEBEB">
<img src="#staffreport.hisphoto#" alt="Photo" width="98" height="98">
</td>
</tr>
<tr>
    <td bgcolor="E6E1FD">Email:</td>
    <td bgcolor="EBEBEB">#staffreport.email#</td>
</tr>
</table>
</cfloop>
</cfmail>

You'll need to provide a full URL link to the image ("http://mywebserver/file/images_personnel/28.jpg"), not just a relative path. Remember, the email client that is used to view the email content knows nothing of the internals of your web server - it can only follow a complete URL to get images and other resources.
-Carl V.

Use different "fx-border-image-source" for first tab and remaining tabs

Hi,
I'm using something like this
.tab {
-fx-padding: 0px 5px -2px 5px;
-fx-background-insets: 0 -20 0 0;
-fx-background-color: transparent;
-fx-text-fill: #c4d8de;
-fx-border-image-source: url("images/tab5.png");
-fx-border-image-slice: 20 20 20 20 fill;
-fx-border-image-width: 20 20 20 20;
-fx-border-image-repeat: stretch;
-fx-font-size: 22px;
.tab:selected {
-fx-border-image-source: url("images/tab-selected5.png");
-fx-text-fill: #333333;
     -fx-background-color: red;*/
to customize the tab appearance of a TabPane.
That worked well. But I need to use a different set of images for just the first tab. Does anyone know a way to accomplish that?
Thanks.

How can I "fix up" the first tab of tab panes that are created after I "fixed up" the first tab of the initial tab pane?
My app allows user to create new tab panes at any moment during program execution.Not easy to answer this one.
The best answer would be to use structural pseudoclasses, but (as David points out), they are not yet implemented.
The trick here is how to identify the first tab of each tab pane so that it can be styled separately from the other panes.
Doing the styling without a dynamic lookup is preferrable to using a dynamic lookup (i.e. when the first tab is created give it a specific style, e.g. tab0).
This is how the charts work, where they set style classes based on series of data, e.g. series0, series1 - this allows you to independently style each series of data.
However the chart stuff has all of that built into the implementation, whereas the tabs don't. To achieve that you would likely need to go into the TabSkin code (http://openjdk.java.net/projects/openjfx/) find out where and how it generates the Tab nodes and write a custom tab skin or extension of the existing one which assigns a numeric style class to each new tab in a pane (e.g tab0, tab1, etc). In other words, not particularly easy if you are unfamilar with the tab skin implementation. You could log a javafx jira feature request to have those style classes set on tabs - file it here => http://javafx-jira.kenai.com.
In the meantime a simple alternative is to use the dynamic lookup method in my previous post and a hack such that whenever you add a new tab pane to the scene you do something like the following:
new Timeline(
new KeyFrame(
    Duration.millis(50),
    new EventHandler<ActionEvent>() {
      @Override public void handle(ActionEvent arg0) {
        Node tab = newTabPane.lookup(".tab");
        if (tab != null) tab.getStyleClass().add("first-tab");
).play();The reason for the Timeline is that I don't really know at what stage the css layout pass is executed. I know that when you initially show the stage and then do a lookup, the css pass seems to have already been done and the lookup will work. But for something that is dynamically added or modified after the scene is displayed - I have no idea when the css layout pass occurs, other than it's some time in the future and not at the time that you add the tabPane to the scene. So, the Timeline introduces a short delay to (hopefully) give the css layout pass time to execute and allow the lookup to work (not return null). Not the best or most efficient solution, but should work for you.

I would like to add content that changes on a calendar basis, such as 'thought for the day". It can then display a different text or image on a nominated day. Can this be done? Robert.

I would like to add content that changes on a calendar basis, such as 'thought for the day". It can then display a different text or image on a nominated day. Can this be done? Robert.

OK Thanks Brad.
I could use Tockify of course, but wanted to create the same things on an existing site.
I do not know how to copy the code and get it onto Muse, but that’s OK for now. I will work something else out.
Robert

Animation size larger than actual image size after saving as gif?

Hi,
I just created an animation (600x600 pixel) and saved it as gif. Everything seems fine except the grainy quality and the fact that it is nearly twice as large as my actual image size (100%) shown on photoshop. I don't mind the grainy quality but the large size is disturbing... Anyone know why or how to fix this problem?
Any help will be appreciated as it's an anniversary gift and I'm stuck on the last step running out of time . Thanks in advance!
Angela.

The 300GB partition is the partition I am booting off of, and the one I was writing about. Disk0s1 is the EFI partition, 210MB. The other Internal hard drive is the core storage physical volume, already mounted, mounted in the image. Recovery HD is the 650MB system recovery partition.
I rebooted to the recovery partition and used Disk Utility to verify the volume, it said everything checked out alright.
In disk utility, the top entry has this data
     Name :     Internal Hard Drive     Capacity :     319.21 GB (319,213,174,784 Bytes)
     Type :     Logical Volume Group     Available :     16.8 MB (16,777,216 Bytes)
     Disk Status :     Online     Used :     319.2 GB (319,196,397,568 Bytes)
However the other entry, right below it has this
     Mount Point :     /     Capacity :     318.88 GB (318,877,626,368 Bytes)
     Format :     Encrypted Logical Partition     Available :     202.18 GB (202,175,160,320 Bytes)
     Owners Enabled :     Yes     Used :     116.7 GB (116,702,466,048 Bytes)
     Number of Folders :     241,519     Number of Files :     1,246,454
So I guess the reboot fixed my problem, df -h now shows 37% used, but the logical vomume group still shows only 16MB free. Anyways, things seem to be working now.

If I have a jpg with a white background around the actual image, is there any way to lose the white and just have the image?

If I have a jpg with a white background around the actual image, is there any way to lose the white and just have the image?

Menu > Format > Instant Alpha > slide the cursor over the color you want to eliminate till it looks good
Peter

DBV-00103: Specified BLOCKSIZE (2048) differs from actual (8192)

[i]Hi all,
I was performing the dbverify of the files to check it. It gives me a error
kindly help me
DBV-00103: Specified BLOCKSIZE (2048) differs from actual (8192)

just take a look
http://tek-tips.com/viewthread.cfm?qid=1112866&page=9
http://www.orafaq.com/forum/t/21449/0/Message was edited by:
user52

Converting Thumbnails to real time images

Some how I have deleted all my photos from my Mac Air & when I recovered it, all photos turnup into thumbnail. Is their any we can convert Thumbnail into real time images?

Thumbnails are real images but only smaller. There's no way to up size them to get back to the size the orignals were.
You're best bet is to restore the library from the backup copy made just prior to this happening.
OT

Thumbnails different to actual image

Similar Messages

Maybe you are looking for