Thumbnails from a D800 showing as a NEF and nikon file number, no picture

thumbnails only showing as a NEF and nikon file number no picture D800 camera

What version Photoshop and Bridge and what type and version OS?
Where do you expect to see the thumbnails and where are they not showing up? In Bridge or in the Mac Finder/Windows Explorer?
If you can, supply a screen shot.

Similar Messages

Import from HD folder with NEF and JPEG files-Can't see JPEG files

I am using Aperture 2 and I am trying to import from an external HD folder of images, with both NEF and JPEG files of the same photo. Using the import function, the import pane only shows the NEF file, not the JPEG file. Is there a setting somewhere that will allow me to see the JPEG file also, so I can import only the JPEG. (note: if I move the JPEG to a different folder away from the NEF file, then the JPEG appears and I can import it.)
PS I am importing only the JPEG because I have a Nikon D60, which is still un-supported.

You could import both, select all images afterwards, select 'Create version from master jpeg'(alt-J), unstack all (shift-cmd-K while everything is still selected), sort by file size to separate the raws from the jpegs, and delete the raws.
Or run the raws through Adobe's DNG converter (which in its newest version, 4.4, supports the D60) and use the DNG baseline support until Apple (or rather Aperture) supports the D60.

Why when I publish template to FCPX the design appears as a thumbnail but the view shows the red warning screen with the Number 2?

why when I publish template to FCPX the design appears as a thumbnail but the view shows the red warning screen with the Number 2?

That is priceless!!! Thanks! I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement. Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
My error msg is a little different from those previously stated, but close: 0xc18a0201. Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100. I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
Oh heavens, I've had the c6280 a whopping 2 1/2 years! I'm sure they want us poor slobs to have to buy a new one every year & a day! To say nothing of the exorbitant prices for ink. And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!! Yeah, & what's with that not being able to print in BLACK if a color runs out????
Anyway I really loved your essay! It's a classic! And says it all! I hate that we have to be 'slaves' to the electronic 'wonders'!!!

Uploaded my pictures from my iPhone to my MacBook- Some of the videos I made show that they imported and play sound, but no picture- are they gone?

I Uploaded my pictures from my iPhone to my MacBook… Some of the videos I made show that they imported and play sound, but no picture… are they gone?Becuase they offer to delete what was imported, so to save space i did... Is there anything I can do to restore the picture?

Do your videos play in QuickTime Playerwhen you reveal one of them in the Finder with "File > Reveal > Original"? Try to open the revealed movie in QuickTime and see if it plays.
Check the format of the movie. You can see it in the Inspector in QuickTime Player from the "WIndow" menu: Window > Show Inspector.
iPhoto does not support all movie formats and codecs that QuickTime player can play, and not all frame rates.
See: Using AVCHD video with iPhoto '11
If the movie does not play in QuickTime Player either, install QuickTime 7 for more codecs.

How to keyword both NEF and JPG files?

I use a Nikon D300 and shoot NEF+JPG. I ingest the files to my hard drive using Downloader Pro and then import them into Lightroom. Lightroom apparently "stacks" the NEF and JPG files together, and the thumbnail is shown as filename.NEF+JPG. When I keyword the files, the keywords are applied only to the XMP sidecar to the NEF file, and not to the JPG files.
While I guess this "NEF+JPG" is called a stack, this appears to be some kind of special stack, as I cannot unstack the images and keyword them separately. Selecting "Stacking->Expand all stacks" does nothing. "Stacking->Unstack" is disabled.
How can I get the keywords applied to the JPG files as well as to the NEF/XMP files?
Thanks.
Guy

OK, I found that option and will try it.
What's the best way of recovering the directories I have already imported with NEF+JPG files? I presume I could delete those directories from the LR database and import them again. (I have enabled the option always to write to XMP.)
That would, I hope, give me both NEF and JPG files showing up in LR. Is there an easy way to copy the keywording from each NEF to the corresponding JPG file?
Thanks.
Guy

Rate and label both nef and jpg files

Hello everyone, this probably sounds like a silly newbie question, but is there a simple way to rate and label both the nef and jpg files in bridge.
I work on a pc and right now I have to click on the nef file then ctrl click the jpg file then ctrl #(1-9) to rate both. It seems like a lot of work. When I use batch processing to rename my files it processes them both so i get a raw and jpg with the same name, so why not with labels?
I'm trying to create an easy working flow to my folders and pictures. My camera settings are set to raw (nef) and jpg. I like to have access to both incase i need to send out a jpg etc etc.
Can someone point me in the general direction on how to keep my workflow clean and simple and how to affect both files, because this is becoming really tedious!
Thanks

Well, first of all, it seems to me that you are creating a lot of extra work for yourself by creating your NEF and a JPEG. If any adjustments have to be done then you have to apply to those adjustments to two different images rather than just one. I think it's going a little far, personally, to have a JPEG copy of every image "just in case" you need to send out a JPEG. Why not just create a JPEG from the NEF file when you need one? But it's your workflow and you can do what ever you want.
Yes, I realize my second suggestion didn't solve the problem. But the problem cannot be solved with Bridge, at least the way it is right now. You have to select the images that you want rated. It just seems to me that your are compounding your work by creating both images all the time. If you have a certain need where you need to produce JPEG images in a hurry for someone, I can understand using the feature. But when it is so easy to create JPEG images that have all of the adjustments, I don't understand the need to have a duplicate JPEG of every image. Again, it's your workflow.
You might speed things up a little bit by going into your Bridge preferences and fix it so that you don't have to hold the control key when applying star ratings. Then you can just hit the number and then the arrow keys to move to the next one.
Another very simple method of creating JPEG copies is to use either the Image Processor or Dr. Brown's 1-2-3 processor, which is a free download from his website. Again, I just think you are creating a lot of work for yourself by having JPEG copies of every image. Unless you are an absolute masterful photographer who never has to make any adjustments to your images, you are doubling the amount of postprocessing required. I promise, I won't interfere in this one anymore.

Separate audio from video - I want BOTH an audio and video file

Hi,
I would like to separate audio from video - I want BOTH an audio and video file.
I don't think this can be done without additional software, but if it can, pointing me in the right direction would be much appreciated.
Brandon

You need Quicktime 7.6 Pro. Control+J to bring up the property window. In the property window is an extract button. Click on either the video or audio and click to the extract button.
You'll find Quicktime 7 in your Utilities folder. If Quicktime 7 isn't install in the Utilities folder you need to install it from you OS installation disk, in the optional installations folder.
If you don't have Quicktime Pro you need to buy it from the Apple store.

I am using using IDVD to create slide shows. When viewed on my computer the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blurry and of poor quality.

I am using IDVD to create slide shows. When viewed on my computer, the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blury and of poor quality. Is there a setting that controls the quality of the burn and if there is, where do I find it? Thank you.

The Mac software - iPhoto, iMovie, and iDVD are not the best with the Ken Burns effect (zoom in/out effect), so you might want to minimize that effect; also, if your subjects are wearing stripes for instance, that will have an effect if you zoom. There is better software available for slideshows; however, I do not know of any that is free (and does a good job). I've used Photo to Movie for some time; it does a fine job even in HD, but you have to pay for it. I use iDVD extensively, but only to add a menu, theme, special effects, etc. and then to burn it.

Strange artifact in some NEF and .dng files

Using a Nikon D80 with 4 GB Sandisk Extreme SDHC card; shooting full resolution NEF; Mac G5, Mac OS X 10.4.10, images are run through Adobe DNG Converter 4.1. Image is opened in Camera Raw 4.1 (and now 4.2) window within Photoshop CS3 Extended.
In some photos with dark areas, there is a single, tiny, transient on-screen artifact in form of a red dot, either two or three pixels square, which always appears in the same location against, say, a dark sky or trees. It can persist or literally disappear on its own after about two seconds. If the file is reopened in the same session, the red dot may not be there at all. If the loupe tool is used, it always disappears within the loupe after about two seconds, even though it may persist in the unmagnified screen. The good news is that opening the image as a .psd in Photoshop shows no sign of this anomaly, no matter how greatly magnified.
Note: It can also appear if I drag the NEF or .dng file over to Preview. But in this case, it does not disappear.
Does anyone have a clue what may be causing this?
A screen shot comparison from Camera Raw 4.1 is attached below. The left image shows the dot in place in the section of the photo and with the loupe.The right image shows the dot gone, but persistent in the unmagnified image.
Neil

Again, thanks, Thomas. Most, um, enlightening! <g> I've been shooting raw exclusively over the past six months or so. Camera Raw apparently did its job, which would explain why the pixel disappeared after a couple of seconds. I'll probably run the same image through Lightroom to see what happens. However, I can still see using .jpg once in awhile (family and friends snapshots destined for email or postcard-size prints). But then, the question begs, if other pixels are compensating for the bad pixels, does that materially affect overall resolution or appearance of the images? Although I've been aware of annoying "stuck" pixels on LCD monitors, I never really thought about how DSLRs deal with this. Neil

Problem about .xml file from PPro CS5 to FCP with RED and P2 file.

I have create a Project in Premiere Pro CS5.
I import the RED file R3D or P2 file XMF and editing my media.
From menù File i select Export to "Final Cut Pro XML.."
I open FCP and Import file XML but the media are not reconnect.
"Warrnig: Non-critical error were found while processing an XML document.
Would you like to see a log of these error now?"
I want see the log file and...
"<file>: Unable to attach specified media file to new clip."
Where is the problem?

Hi Dennis I re-format my MACPRO 8 Core and I installed Final Cut Studio Suite and CS5 Premium (no CS4)
I install Blackmagick driver Decklink 7.6.3
If I open the After Effects and setting preview card blackmagic, I see the preview in external monitor.
If I open the Premiere Pro and setting preview, I don't see the blackmagic card but the second monitor, DV....etc.
In Premiere I see the blackmagic preset, but no the preview card.
I have a second question.
About Red file I want editing in Premiere Pro and i whant color correct in Apple Color from FCP.
My problem is: my color program crash when I send file form FCP to Color (random mode)
The sequence is:
I import file red in PPro5 -- editing file --- export file xml.
Close the PPro5.
Open FCP import xml (no re-link media)
Save de project in FCP
Select sequence and send to Color.
In this moment the Apple Color crash.
I shutdown the MAC.
I power-up the MAC
Open FCP select the project and send the sequence to Color.
Color see the project but no media.
I re link the media and I editing in color my media.
Why Apple Color program crash?
Sorry for my English
Many Thanks
Distinti saluti
Gianluca Cordioli
Alchemy Studio'S di Gianluca Cordioli
Via Pacinotti 24/B
37135 VERONA
cell.:+39 3385880683
[email protected]
www.alchemystudios.it

Bridge does not show dimensions for .PDF and .AI files

Is there any way to see the dimensions in cm (or inch) for PDF and AI files in Bridge? I'm using Bridge CS5 4.1.0.54 as part of CS5.5 Design Premium, have set the preferences in Bridge to show them, but there are no values in the metadata fields for dimensions in inch/cm. I don't know if this behaviour is normal or if there's something wrong with my installation...
TIA,
Matthias

May be 'dimension' is not the right word/translation. In my german version it says 'Abmessungen (in Zoll)' or 'Abmessungen (in cm)', which should mean something like 'dimension' or 'size'. DIN A4, A5, US Letter, Legal etc. pp. in cm or inch.

Emails sent from device not show in "Sent Box" and "BIS" issue

Dear All and Rim:
New to BB world, needed following help...
AOL mail box had connect with "Tour" successfully, service provided by Verizon.
Mails sent from device are not show in AOL "Sent Box" nor Outlook Express's "IMAP" / "POP" server's Outgoing "SMTP" folder.
Truly need copies to "Sent Box", Thanks for help!!
Also try to set up "BIS" accout, error message said:
"Your Account is not accessible via HTML Browser..
Please use your device to access Black Berry Internet Service"
I used this link:
https://bis.na.blackberry.com/html?brand=vzw
Thanks you,
Jan
Solved!
Go to Solution.

So for the mail issue seems sending myself a copy is the only way to go, right?
That would be a solution.
And about the BIS, my try was on a PC, it didnt work... Anyway, i was going to log on to the BIS to work on my issue above, but seems it doesnt help now, so it doesnt matter if i can sign up or not.
Well, that's entirely odd...I just used that link myself (from a PC) and get into my BIS account just fine. You can, however, use the device interface to BIS -- watch that demo I provided you above for instructions on that. BIS is merely a service, provided by your carrier. The PC/website method and the device interface -- those are simply two different interfaces into the same service, so using one or the other doesn't matter...they result in the same thing.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

T500 will not boot from bootable CDs/DVDs, but will read and open files on them

System: 2 T500s, both manufactured early April 2009, win XP, ATI Radeon 3650 graphics,4GB RAM, latest Lenovo drivers installed..
Problem:- Our 2 T500s cannot boot from any windows coded recovery CD -except Lenovo's rescue/recovery discs. Some -but not all- Linux code recovery CDs do boot the T500. Every other kind of CD and DVD such as audio and video works fine in windows XP.
Here an example of our 2 T500s' failure to recognise bootable CD/DVD discs. All the files and folders on a Paragon Partition Mgr v8.5 Recovery CD can be viewed in windows explorer and files such as jpg, txt and zip can be opened. This CD will not boot the T500, however, it will boot our other -non-Lenovo- computers. The same applies when the media are DVDs with identical content.
We have tried several different kinds of CD and DVD media to no avail. Burning the media on other computers and using several kinds of burning software does not help, ourT500s refuse to boot from them too.
The problem seems clear enough, on starup our T500s fail to distinguish between windows coded bootable and ordinary CDs/DVDs -unless they are Lenovo recovery/restore discs.
A solution would be gratefully received.

Thank you for your very kind assistance,
Q: "1. Did you apply the DVD firmware fix here?"
A. It was` already installed on our 2 T500s. We have also applied just about every driver update from Lenovo.
Q: "2. Did you try booting from a USB optical drive that you first attached to another system where you could verify that booting from it was possible?"
A. Yes, many times from a USB CD/DVD drive, it failed too. We burned on that drive too, but the T500s will not boot from those CDs either.
Q: "3. In this thread the solution was to use another burning program than Roxio..".
A. We have used the Paragon internal ISO creator/burner, the Roxio burner that was preinstalled wth the T500, BartPE internal ISO/burner ,InfraRecorder and others too. Made ISOs and burned from them, burned CDs directly on the fly etc, all to no avail..
For some reason, our two T500s' CD/DVD drive controllers or some intermediate software act as if the CD's boot sector is not present. Clearly, something (BIOS, software, unstable hardware, or ? ) is blocking the read or write of the data necessary to boot these CDs. Whatever that 'something' is, it has no effect on burning and booting Lenovo recovery CDs.
The bizarre part of all this is that a`Lenovo recovery CD burned on the T500 drive WILL BOOT the T500. A Paragon v8.5 recovery CD or BartPE CD burned in one of our non-Lenovo computers will boot ithat and every other computer we have except our T500s.
PS Thank you for the link to the new version of Roxio, will download and install it.

HOW DO i GET MY MONEY BACK FROM A TV SHOW THAT WON'T PLAY!!!

How do I get my money back from a tv show that is downloaded and paid for but WILL NOT PLAY. It skips through entire episode in 20 SECONDS! I WOULD APPRECIATE AN ANSWER.

I am waiting for an answer! This is ridiculous!

IPhoto and Nikon NEF files in Yosemite

Hello,
Since I installed Yosemite last weekend, I cannot upload photos from my Nikon D610 NEF (RAW) format. Every time I have tried to upload -either by connecting the camera with the cable or by inserting the memory card in the Macbook- iPhoto starts to idle when I click "import photos". Beach ball appears and after several minutes iPhoto crashes. I use a Macbook Pro 2.8Ghz, intel core i7, 4 GB 1333 MHz DDR3 (late 2011). I even tried doing it one by one... same problem.
Is this a problem that Apple is going to solve: NEF or RAW compatibility with iPhoto and Nikon files? Does anyone now how long for this to get fixed by Apple? I have hundreds of photos in my memory card to upload and work with.
Thank you.

Support for your camera was added in Camera Raw 5.4 which means support will be available in PSE7 and automatically in versions 8, 9 & 10.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4524

Thumbnails from a D800 showing as a NEF and nikon file number, no picture

Similar Messages

Maybe you are looking for