Thumbnails in Bridge CS4 run off the page

Using WinXP and CS4: Bridge displays as though the window is bigger than the monitor.  It's as if Bridge thinks the window (not the monitor) is wider than it is.  This happens weather or not the window is maximized.  The scroll bar at the right is not accessible.  I can switch between viewing modes, and the same problem exists in each mode (details, list, grid).  I have uninstalled and re-installed twice with no change.  The problem did not always exist, but I can't think of what is different to cause the problem.
The attached image is a full screen capture.
Any help?

Here is a link that has the same problem.  No real jump in your face solultion, but hopefully it will help guide you.
http://forums.adobe.com/thread/460793?tstart=30

Similar Messages

  • JUmbled text in Safari, and it runs off the page and behind images

    i have a really annoying problem that is only happening in Safari under every user on my computer.
    I have been to the Apple store and they have tried to fix it, but it perplexed everyone there I guess,
    either that or the fact that it was 8:30 and they close at 9... go figure. Anyways- When in Safari on
    certain websites that are heavier on text the words displayed in the headlines or body copy overlap, become jumbled, and run off the page.
    As I am typing this it is not letting my words wrap to the next line in the text box, I have to hit enter
    everytime I want to go to a new line. This problem is getting so annoying, and I am on the brink of
    switching to Firefox but I love Safari so much more. Can someone please help? I have already look
    at the " never display fonts larger than____ option" I am hopelessly in need of some advice. Thanks
    in advance for your time and patience. Have a great day!
    Bill

    howard --
    This is your third post on the this subject in the last 5 days.
    It's not necessary to start a new topic everytime.
    Just check your "My Posts" in the box to the right of this message,
    and you can always go right back to your posts.
    Now, it looks like Hawaiian Starman & Rachel have already guided you
    to look at your RSS feeds, etc. Why don't you check out their responses,
    and then let us know here what the results are, OK?
    Here are your other two threads:
    http://discussions.apple.com/message.jspa?messageID=5354423#5354423
    http://discussions.apple.com/message.jspa?messageID=5307512#5307512

  • How do I change the compatibility view so that my words are not running off the page?

    I do data entry and in the system I am working on the words are running off the page. In internet explorer there is a little broken page on the tool bar that lets you change the compatibility and I am not finding anything like that with firefox. Please advise how I can change the setting so that the words will wrap correctly.

    As far as I know, Firefox doesn't have a similar compatibility feature.
    I assume this system is not accessible to forum volunteers, so I'm going to ask you to do a little sleuthing. I assume you are entering text in a multi-line textbox (an HTML <textarea> control). Could you do the following:
    * Have your text entry form open in one tab, and a reply to this thread in another tab.
    * Right-click in the control that doesn't wrap and choose Inspect Element. A small pane should open with part of the HTML highlighted in blue.
    * Right-click the highlighted <textarea> tag and choose Copy Outer HTML.
    * In your reply tab, paste the HTML, and remove the leading < character to avoid messing up your post. This will show any legacy settings on the tag that might be affecting how it wraps.
    Here's an example using this very box:
    textarea style="width: 567px; height: 616px;" rows="10" name="content" required="required" placeholder="Enter your reply here." cols="40" id="id_content"></textarea>
    If it's not a textarea, then that would be useful to know as well.
    * Back in your form, you may or may not have a pane to the right that shows various style rules. If not, click the Style button at the lower right to open it. Look for any rules with the '''white-space''' property (the properties normally appear in colored text). If you find one, right-click and choose Copy declaration line. Switch back to this tab and paste the rule.
    With that information, hopefully we can find a workaround.

  • I have lost scroll bar on 1 website only since upgrade to version 19 and the words run off the page

    Only 1 website affected. Scrollbar is missing and words run off page. If I minimize the screen, then maximize, the site returns to normal. If I leave the page, refresh the page or click on a topic to read (it's a sports message board) I lose the scrollbar again until I minimize-maximize. I have disabled all add-ons 1 at a time and all together. That doesn't help. Any suggestions? Other Firefox users are apparently not having this problem on the same website.

    Are you running any add-ons that might change the appearance of the page, e.g., add-ons that block ads, Flash, scripts, etc.?
    Sometimes you notice glitches in Firefox related to graphics card driver incompatibilities. To rule that out, you could disable hardware graphics acceleration. You usually need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    orange Firefox button ''or'' classic Tools menu > Options > Advanced
    On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
    After restarting Firefox, do you notice any difference?

  • Text is running off the page

    I have completed my ebook and when I preview it on multiple ipads -- all the latest ipad, some of the text is cut off on the right hand margin.
    Is there a preferred font to use that might help avoid this? I've adjusted the margins to try to compensate for the runoff but it doesn't do any good. There seems to be no answers.
    Help!

    i am having the same problem. i've noticed that widgets and page numbers (in the footer of my theme) display fine well to the right of the cutoff text.
    here is the ibooks author screen shot where the text in the box is fine:
    and the ipad3 screen shot. notice the widget and footer display fine but the right hand portion of the text is cut off.
    i'm afraid that if there isn't a fix for this soon this may be a deal killer for me.

  • Why do double-sided copies run off the edge when single-sided do not?

    Hi...
    I just made a document in Pages that is essentially one big table (or in other words, a spreadsheet without having to purchase Numbers).  When I print it as single-sided, it fits perfectly on the page.  But if I click double-sided, without changing anything else, the left margin runs off the page.  The nature of this is such that I don't really want to significantly reduce the size.  Is there some trick to this, or do I just have to remember to print it one-sided?
    Thanks!

    There should be an arrow, to get more choices to show. Also the checkbox is just showing you the current selected, you change the setting by touch the big icon, not the checkbox. The touch panel is not a high resolution one, so try to touch the checkbox, result in the icon being selected, that's why the setting didn't change. Try find the 1:1 icon and touch that.
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • Text runs of the page / doesn't resize with window

    Hi,
    I have seen this before but cant figure out how to fix this:
    In Mail and other applicaitons that involve typing text the sentenses run off the "page".
    When I resize the window the lines dont' adapt to the window.
    I am stumped, please help :-)
    Rogier

    Howdy. See if this helps:
    https://discussions.apple.com/thread/5298047?tstart=150

  • A document page opens that is too big for the display and runs off the end of the monitor

    How do you fix a problem where document pages open that are too big for the display and runs off the end of the monitor? The borders are off the monitor so there is no window edge to grab and adjust.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I cannot set up page set prior to printing. From file to Page set then it comes up full depth..running off the bottom. I cannot print from the web

    Question
    I cannot set up page set prior to printing.
    I go from File to Page set which comes up very narrow and tabs Format& Options and Margins Headers/Footers.
    These are full depth..running off the bottom. I cannot set footers. I cannot print from the web
    When I go to Print Preview I get a totally gray screen

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages

  • Data runs off the end of the page

    I have a form which is flowed and the rows and table are set to allow page breaks.  However, when a cell has more content than will fit on a certain page, it does not go to the next page, it just runs off the end of the page.  Does anyone know why?
    Thanks!

    Couple of questions,  are you interactively entering data or are you merging data?
    What is the xfa template version or what do you have chosen as the Target version?
    If you click on the cell in Designer and go to the Layout tab, under Height is the "expand to fit" checked?

  • My bookmarks run off the bottom of the page, and I cannot move them up

    When I open my bookmark folder and try to open a subfolder near the bottom of the screen, the bookmarks in this subfolder run off the bottom of the screen, and I can find no way to move them into a visible area.

    There is a little triangle arrowhead used to scroll the bookmarks.
    There have been some changes in pre release versions of Firefox.
    What menus and icons are you using ?
    For instance are you using the new menu icon that is alongside the Bookmarks star in Firefox 29 and later ?
    (Unlikely from the description) Or are you using a second click on the bookmarks star itself ?
    That has a slider on the scrollbar and has a tree of folders that may be expanded.
    See [[Use bookmark folders to organize your bookmarks]]

  • InDesign thumbnails in Bridge CS4

    I've noticed that some InDesign CS2 and CS4 files do not show thumbnails in Bridge CS4. I tried the Build and Export Cache function in the Tools menu and nothing changed. Any suggestions?
    Also, I would be interested in a Bridge extension for harvesting thumbnails for old PageMaker 6.5 and 7 files.

    Here is a link that has the same problem.  No real jump in your face solultion, but hopefully it will help guide you.
    http://forums.adobe.com/thread/460793?tstart=30

  • How to show rating dots and file name underneath thumbnail in Bridge CS4 preview workspace?

    How to show rating dots and file name underneath thumbnail in Bridge CS4 preview workspace?

    Thank you! That was it. The option to change it is not available in preferences (though I believe it was in early CS versions). It's hidden in a dropdown menu associated with an icon at the top. It sure wasn't easy to find, and I probably would not have done so without your lead. Thanks again!

  • Trying to configure Portal to run off the network

    Hi all,
    I am trying to configure Oracle Portal 3.0.9.8.2 to run off the network. I have taken all of the recommended steps in terms of configuring hostname, using a static IP, running and checking the ssoodatan script, updating the hosts file, and configuring a loopback adapter, but can still not make it work. The Portal works and functions fine when connected to the network, but as soon as disconnected from the network Portal returns
    Error: Timeout occurred whilst retrieving page meta data 0 ms.
    or
    Sometimes it will display the banner, but the Portlets and the Providers will instantly timeout. I have cranked up the timeout levels of JServ and the Providers but to no avail. I have put the recommended timeout, stall, requesttime, buffer, minStall, minTimeout in the zone.properties file, but no luck.
    I have noticed within the jserv.log the error message below. The link that jumps out at me is UnknownHostException: www-proxy.us.oracle.com. I did have my proxy server set at one time, but I erased it from the global settings page, and I ran the procedure I found somewhere on this discussion board to make sure it was set back to null. When I run the diag.cmd program it shows my proxy server being empty. Where could this be picking this up from, I also have proxy servers turned off in my browsers. Any suggestions or help??
    13/02/2002 16:04:08:752 PST] page/JNI: Exception when trying to connect in 1.
    [13/02/2002 16:04:08:752 PST] page/Timeout occurred, label=147 url=http://jstrada-lap.us.oracle.com/pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet time=10ms
    [13/02/2002 16:04:08:762 PST] page/ContentFetcher Unexpected Exception, name=content-fetcher0
    java.net.UnknownHostException: www-proxy.us.oracle.com
         at java.net.InetAddress.getAllByName0(InetAddress.java:575)
         at java.net.InetAddress.getAllByName0(InetAddress.java:544)
         at java.net.InetAddress.getAllByName(InetAddress.java:537)
         at HTTPClient.HTTPConnection$EstablishConnection.run(HTTPConnection.java, Compiled Code)

    I think you must add an entry to your /etc/hosts file, as follows:
    127.0.0.1 noa noa
    and create a vhost entry on /etc/httpd/conf/extra/httpd-vhosts
    <VirtualHost *:80>
    ServerName noa
    DocumentRoot "/srv/http/"
    <Directory "/src/http/">
    Options Indexes FollowSymLinks
    AllowOverride None
    Require all granted
    </Directory>
    </VirtualHost>
    Although I'm not sure if the vhost is actually necesary, but it won't harm.
    pd: if you use vhosts, remember to uncomment "Include conf/extra/httpd-vhosts.conf" con /etc/httpd/conf/httpd.conf and restart apache
    # systemctl restart httpd

  • The address book window will go out of focus then skew off the page?

    i'm on a mac G4 400 mhz running 10.3.9. when i scroll down the page of the address book window the anames will go out of focus and then skew off the page! wacky. can i reinstall a new addressbook from mac? i recently bought a 15.2 powerbook which has tiger 10.4 something but it will not install into the old G4. any ideas? or solutions?
    400 mhz powerPC G4   Mac OS X (10.3.9)  

    fiddledum,
    Welcome to Apple Discussions.
    I would recommend that you check out Font Management in Mac OS X Tiger and Panther, by Kurt Lang.
    Another possibility is to Quit Address Book, find the com.apple.AddressBook.plist in the ~Library/Preferences Folder. Drag it to the Desktop, and log out/in or restart.
    Attempting to install a newer version as you have discovered will not work.
    ;~)

Maybe you are looking for

  • Sales orders not replicating to R/3

    Hi Experts,                 I created a sales order in CRM, and then checked for it in R/3(VA03). In R/3 it states the sales order is not present in the database or is being archived. I checked the Bdoc's. The sales order is strucked in Bdoc's. What

  • No longer able to sign into Folio builder after updating

    I just did the update to the Folio builder as indicated in this thread: Announcement (August 16) - Web Service Update Now I cannot log into the Folio Builder, I amd shown the following message in the Folio Builder Panel: You do not have a compatible

  • Two Questions I Cannot Solve

    Hi There! I Am Setting Up My Public Skype Account. But Here Are Two Questions I Couldn't Figure Out How To Do. 1) How To Disable Messaging? (ex. you cannot message echo service)2) How Do I Message Everyone, Everything at the Same Time? (including the

  • What is a PDF password?

    What is  PDF password and  how do I generate one?  I try to open a PDF photo file in Elements 11 and it says I need a password.  I have no idea what this is.

  • My fonts are all slanted - what to do?

    Something has caused all of my fonts to be slanted - almost as if they were all italic, but not quite. This is only in PS, not any other app. I'm using PS cc (2014) photographer edition - all up to date automatically. Any idea how to fix this - I'm a