Thumbnails missing in IMovie

I have just started to use the IMac, and IMovie 6. I have run into a problem. In some Imovie albums, there is only one thumbnail visible. Image numbers are shown for all pix however. In some albums, there are no pix, only image numbers. This also happens when viewing the Libary in IMovie. In IPhoto, all images are shown correctly. How can I recover from this problem?
Thanks,
Chuck
IMac   Mac OS X (10.4.7)  

Hi
Just thinking - Have You tested to turn off Your Mac and re-boot from zero ?
In many cases this helps - might do so now too.
Yours Bengt W

Similar Messages

  • 2011 iMac, OS X 10.7.5 Lion is missing iPhoto, iMovie, iMessage and Garage Band

    I purchased a little used 2011 iMac last night. OS X 10.7.5 Lion is missing iPhoto, iMovie, iMessage and Garage Band, which according to this Apple page should be included Apps on iMacs: http://www.apple.com/imac/built-in-apps/
    Lion Recovery also appears to be missing, as restarting while holding down the Command-R keys is not working after half a dozen tries.
    How do I restore at least iPhoto, which I need and use daily?
    I thought of buying and installing Mountain Lion, but near as I can tell from the Apple site, iPhoto is NOT included.
    I DO have Snow Leopard discs from my old iMac and could revert so as to get back to work, but if the Lions can be made to purr, I'll stay and try to work out my minor quibbles.
    Thanks for your consideration,
    Blandz

    Thanks for the additional info!
    Yes, those are the very arrows of which I speak. I happen to be using Firefox at present and took a screen shotshot of my basic desktop layout. Although "Dummy" widows are shown, they represent the esential windows I access frequently while doing other tasks.
    At any time, one or more windows may be covered by others, but they are always "in their place" so that by clicking on upper corners they quickly appear. Note in particular the right side windows. Where I would click the corner to expose a partially hidden window, Lion chose to put the diagonal full screen arrows. Unless I'm VERY careful to click to either side of the arrows (and this extra care defeats the whole QUICKNESS factor), the window then opens FULL screen..., annnoying, unproductive and not at all useful to my work processes.
    Hence my goal to send the arrows to their grave. Should I succeed, I'll continue going forward with new versions of OS X, and that would be my preference.
    Be well,
    Blandz

  • PDF thumbnails missing after optimization?

    Hello. I have quite an urgent question. My business is sending out a PDF deck tomorrow and I am currently creating our PDF using 'Combine files into PDF' method in Acrobat Pro on Mac - default size compression.
    When I finish creating the PDF (not optimized), all the pages are present. However, for the sake of sending the PDF in emails, I need to either Save As an Optimized PDF or Save As a Reduced Size PDF. I will be sending an Optimized PDF, but in both cases, as soon as Acrobat finishes creating the smaller PDF, I have page thumbnails missing/blank in the same places every time (pages 1, 5 and 33).
    I have attached screenshots to this thread as an example. It's very odd, because the majority of people I've tested the PDF with say they have no issues with blank pages and that all pages appear fine in the PDF - both when viewing on computer and mobile devices, iPads etc. For me personally, the only issue with blank pages is when opening the PDF in 'View' mode - if I download the complete file there are no pages missing.
    I was wondering if anyone can help me resolve this issue - I just don't want to risk sending this out to clients and some being unable unable to view certain pages in the PDF!!
    [url=http://postimg.org/image/ikl48huyj/][img]http://s9.postimg.org/ikl48huyj/Screen_Shot_2013_11_06_at_16_14_35.jpg[/img][/url]
    [url=http://postimg.org/image/jjfoc2m5d/][img]http://s16.postimg.org/jjfoc2m5d/Screen_Shot_2013_11_06_at_16_14_46.jpg[/img][/url]

    After migrating, the iPhoto library appeared in the Library window in my left task pane of Aperture. I believe that the masters for the photos from iPhoto remained in iPhoto.
    When I did the migration from my Time Capsule I pulled in my iPhoto Library and Aperture Library into my Pictures folder. Then I launched Aperture and everything looked great, except the thumbnails. The folder / project structure remained and both libraries were there. The pictures are actually there too. If I work on a single photo, the photo appears, but the thumbnails don't when viewing at a higher level such as a folder, project or all Photos.

  • Missing iDVD iMovie GarageBand iPhoto

    A while back I had some problems with my Mac. I took it in and I had to completely reinstall Leopard. They also connected something to my computer and did all this stuff. This was about 2-3 months ago. I never noticed till now, but I'm completely missing iDVD, iMovie, iPhoto and GarageBand. I never noticed because I never needed to use these programs until now. Anyways, I'm very frustrated. My computer came with these programs. It's obvious I used to have these programs because I still have icons or file folders connected with these programs. I don't want to have to spend $80 on something that came with my computer.
    Thanks to anyone that replies,
    Brooke Carvalho

    Perform a custom install of them from your computer's original disks, and then update them as needed. If you have a retail version of Mac OS X 10.5, it doesn't have those applications.
    (36066)

  • Panel to apply titles, music, etc. missing.  iMovie 10, iMac, Mavericks 10.9.4.  How to redisplay?

    Panel to apply titles, music, etc. missing.  iMovie 10, iMac, Mavericks 10.9.4.  How to redisplay?

    Top-left of the screen, just under the red circle that would normally close windows, do you see see "Show" with a triangle pointing to your right? If so, click it.
    Do you see the list of Events, Projects, etc?

  • IPhoto videos missing in iMovie 09's thumbnail view

    Recently I imported a bunch of videos into iPhoto 09 from my camera, and when I next opened iMovie 09 it generated thumbnails for them as expected. But when it finished, only about a quarter of the videos were actually there in iMovie. They are all of the same format and everything and it is a random selection of them that for some reason didn't show up in iMovie. Since then I have added more videos to iPhoto in the hopes that when iMovie generated their thumbnails it would find the ones it missed but this didn't happen. All the new ones came through fine though. I've tried restarting iPhoto, iMovie and my computer but nothing worked. Does anyone know of a way to get iMovie to notice these files without having to make copies of them? (I tried the Import button which lets me find them through "Media" but I have to find each one individually and either copy it - which I would rather not do since the files are quite large - or move it, which means I could no longer open them through iPhoto). I also noticed that if I drag the video onto my desktop and re-add it to iPhoto then iMovie does notice it. The only problem with this is I have quite a large number of videos and to make copies of them all then delete them again, and have to find all the ones that are missing would be very tedious, but if nothing else works I will have to resort to this. Does anyone have any ideas or has experienced this before?
    Thanks very much for your help

    Unfortunately I think you have found all the possible fixes and they are all time consuming. It does sound like iPhoto isn't recognizing and allowing iMovie to then see the iPhoto Videos Library. A typical thing I suggest for folks with BIG iPhoto libraries is to do a iPhoto Library repair.
    Hold down the ⌘ Command key + Option, then launch iPhoto. You'll get a dialog box with a number of check boxes. Not knowing exactly which of these is the one that will fix your problem, I say check them all and click OK and let 'er rip. This too will be time consuming as iPhoto reconstructs your whole catalog of photos and videos. If there's any damage it will correct that as well. Will it fix this problem of iMovie not seeing the iPhoto Videos, I don't know. You may also have to try deleting the iPhoto preferences .plist, but try the iPhoto Library rebuild first.

  • Missing iPhoto Thumbnail Images in iMovie Project Library

    Okay, here goes...
    I'd created a short movie and have it in iMovie's project library. The movie included video footage from a dv camera as well as video from my digital photo camera. I recently reorganized and merged several events folders in iPhoto from my vacation, which included parts of the video used in the iMovie short movie project. Now, when I select the project in iMovie, some of the thumbnails are missing from the video sequence to the right of the project name.
    It still plays (thankfully), but it's irritating me that I cannot figure out why the thumbnails have disappeared.
    Does it have something to do with merging iPhoto files? If so, or even if not, how do I fix this and have the thumbnails reappear?

    Something similar is happening to me. I created a project a couple of months ago in iMovie '08, and now the "upper window" thumbnails are showing with an exclamation mark - but just the video clips! The photos are still there. You can see the thumbnail with the exclamation mark and when you drag the cursor through it to see it play, it only does in the little damaged thumbnail but not in the screen. After touching it, it becomes black. It does not play at all when the project is played completely. I someone finds out how to solve this, please advise.
    Thanks so much.
    Lol@

  • Photo effects missing in iMovie project

    I have modified photos adding effect and optimizations with iOS standard pictures editing. I can see picture effects also if I open images with iPhoto. when I add pictures to iMovie project all effect are missing, pictures are used in original format.
    how I can see picture effects in iMovie?
    thanks,
    Mario

    Something similar is happening to me. I created a project a couple of months ago in iMovie '08, and now the "upper window" thumbnails are showing with an exclamation mark - but just the video clips! The photos are still there. You can see the thumbnail with the exclamation mark and when you drag the cursor through it to see it play, it only does in the little damaged thumbnail but not in the screen. After touching it, it becomes black. It does not play at all when the project is played completely. I someone finds out how to solve this, please advise.
    Thanks so much.
    Lol@

  • Events and project thumbnails missing after moving to new computer

    I just helped a friend to move to a new Mac. I have copied all her personal data to her new computer, so iMovie Events and Projects are present in her new Movie folder. However, after opening iMovie '08, all events and project thumbnails are missing. How could this be? Is there perhaps some library file that keeps track of all this that I need to copy as well? Is there a way to re-link iMovie with the events folder?

    Try this:
    First, make sure you've quit out of iMovie. Then go to your Movies Folder > iMovie Events > and then into the folder of the even that's giving you trouble. Drag the folder "iMovie Thumbnails" to your trash. Then open the folder "iMovie Cache" and drag the file "Cache.plist" to the trash. Restart iMovie. It should rebuild the thumbnails, and by regenerating the .plist file, it should have the data it needs to reed the new thumbnails into iMovie.
    It worked for me. Hopefully it will work for you too.

  • How can I change the thumbnail of my iMovie 10.0.2 stills file?

    How can I set the thumbnail in iMovie 10.0.2
    It was the first image in the movie ( the one I want to use) and then for some reason it changed itself to a random image from the movie and keeps randomly changing.

    https://discussions.apple.com/message/17364930#17364930

  • Faces thumbnails missing after recovery from time machine

    I got a new harddisk in my iMac via Apple's harddisk replacement program. I recovered all my data via a Time Machine backup (from a Time Capsule). All seemed fine after recovery of backup. When firing up iPhoto after the recovery iPhoto asks for updating all the thumbnails (don't know why). After a while everything seems fine - all photos are available with thumbnails in the events view. However all Faces thumbnails are missing - all persons in the faces view are black boxes. I can see that all the faces tagging are intact - when clicking a person I can see all the tagged images as black boxes. When switching the little "Faces - Photos" control to "Photos" I can see the photos containing all the tagged persons all right. I seems like it's only the face thumbnails that are missing.
    So far I have tried the following without succes:
    Repaired the iPhoto database with iPhotos own tool (holding Command and Option down when starting iPhoto)
    Updating the entire library from an earlier backup
    Updated the faces database files from an earlier backup as explained in this post
    I'm out of good ideas now - can anyone help?

    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button,                         
    and select the library you want to add from those in the selection window.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
    Note 2:  Your current library will be left untouched for further attempts at a fix if so desired.
    OT

  • Web gallery thumbnails missing

    when I publish a web gallery it seems to work. I can go to the gallery online and view photos.
    When I go to another one of my computers to work in iPhoto the gallery shows up, but the thumbnails are showing up as question marks. What's up with that?
    Am I missing something?
    Thanks

    I am having the same problem. On my second computer (ibook), when I go to iPhoto, I see the Web Galleries created through the first computer (imac), but I do not see all the thumbnails, only the dotted outlines. I have five galleries. One has all thumbnails, two have some of them (and outlines) and two have only the outlines.
    I went to iphoto>Preferences>Web Gallery. Then I clicked the "Check Now" button to the right of Check for Updates (top row). Not sure if this is a program error, user error, or maybe even network error as I'm using my ibook on a different (and perhaps weaker) wireless network.

  • RAW thumbnails missing after iPhoto library rebuild

    iPhoto would not open for me shortly after upgrading to Lion. I rebuilt the library using command + option with all checkboxes checked. All JPEG thumbnails were present, but all RAW thumbnails just showed a black box with a dashed line. When I double click the missing thumbnail, the image does appear in iPhoto.
    I then rebuilt the library a second time, but the problem is the same. The iPhoto library is in the normal place on the startup drive.
    RAW photos were generated with a Canon Digital Rebel and Canon 40D cameras. I do have Aperture on the system as well.

    As I say, I've seen it take 4 times to work.
    Other than that:
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 

  • Thunar avi Thumbnails Missing.

    Hi, all.
    I did a fresh install and imported my backed-up /home files. Photos and Flash files have thumbnails when I browse them in Thunar, but my avi files don't. As far as I'm aware, I've got the relevant thumnail packages installed, and Tumbler, too.
    Any ideas why the avi ones are missing?
    Many thanks,
    Chris.

    Hi, skunktrade.
    I can report that I do have it installed. I had this problem a LONG time ago and I think it may be to do with the different file extension which are defined in /usr somewhere. This is where Thunar used to check for thinks it could generate thumnails for.
    Thanks for trying.
    Chris.

  • Files missing in iMovie projects

    Hi,
    got a big Problem:
    I tried to export a movie and right before the export been finished iMovie crashed and left all my projects unuseable.
    Almost all Clips in most of my projects are marked with this annoying triangle meaning the file's missing now.
    Strange thing is, all of them r still in my camera roll - accessible and viewable.
    Any suggestions?

    See if this helps.   https://discussions.apple.com/thread/6071629?tstart=0

Maybe you are looking for

  • Ipod nano not showing up in itunes and getting message about problem with this drive, ipod nano not showing up in itunes and getting message about problem with this drive

    My ipod nano has been working fine for at least three years.  All of a sudden I get two messages.  First, "there is a problem with this drive, scan and fix it". And, an Ipod has been detected but can't be identified properly.  It's a 6th generation n

  • Get invisble file of invisble folder?

    Hi I have an app that stores it's log files in a specific folder which is invisble, this is giving me a headache as id like to use folder actions to have the log copied and sent to another folder which is visible. Can I get some advise please a I can

  • N79 bloked

    hi all, i have a problem with my N79, wen i turn on  it ok 2or 4 min later it will be bloked, i don't know what can i do to fix it up,

  • PropertyNotFound Exception in Hibernate

    Hi, Can smeone help me on this error? I have defined variables in a file Rates.as : public class Rates.as{ public var rate1:String; public var rate2:String; public var rate3:String; public function getRate1() :String{ return rate1(); public function

  • Classpath for JNI call in NT4?

    ?I prepare MyClass for JNI call on iPlanet 6 running on NT. The corresponding DLL is put in WINNT\SYSTEM32. The classpath set in registry is updated too. But error "class not found. (no MyClass in java.library.path)" still occurs. Is there any work i