Thumbnails not showing when camera connected and ready to import

Whenever I connect my camera, iPhone, iPod, etc to my iMac - iPhoto recognizes the device, but all I see is dotted lines for the thumbnails when it is ready to import. I can import the photos no problem; iPhoto even recognizes duplicates. It is more of a nuisance than anything. What is the best way to resolve this problem? This just started a week ago.

I did solve the problem. I deleted my iPod Photo cache and re-formatted my SD cards. All work perfectly now. Hopefully you already downloaded your photos from the card. I have not had any problems with any of my SD cards or devices once I re-formatted. Hope this helps. Good luck!

Similar Messages

TS5209 The Apply Tv do's not show when i go and click display settings on my mac

For mirroring my mac on my apply tv (3)

Hi solinuyanik1,
Welcome to the Support Communities!
The article below will show you how to setup AirPlay Mirroring between your Mac and your Apple TV. If your Mac is not one of the models that is supported for this feature, you can connect your Mac directly to the TV with an adapter.
About AirPlay Mirroring in OS X
http://support.apple.com/kb/HT5404
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573#2
Cheers,
- Judy

Not showing a secure connection

in firefox 4 its not showing when im connected to a secure connection like in previous versions

The padlock has been replaced by the site identity button, for details on using it see https://support.mozilla.com/kb/Site+Identity+Button
If you want to add a padlock icon to the location bar, you can use the Padlock add-on - https://addons.mozilla.org/firefox/addon/padlock-icon/

TS1410 My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

Hello Jane Benstock,
Thank you for using Apple Support Communities
It sounds like the next best step to take would be to reset the iPod Shuffle.
Check out this article named Resetting iPod shuffle found here http://support.apple.com/kb/HT1655.
All the best,
Sterling

Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand.

Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand. I also cannot attach any of these pics into an e-mail or into any other file. I have already went through all 3 Repair options and when that did not solve it went through a complete Rebuild. Any Help?! Any Suggestions on how to fix this?! I have spent almost 2 days now going through all of the published help.
I have backups going back 6 months - I have not had the real need to check every album before - but - all of my backups also have this same problem.

The triangle with the ! indicates that the connection between the thumbnail and the orginal is missing - this can be caused by many things including database corruption and user action emoving the originals photos on urpose or by accident
If the database is corrupted then rebuilding is the solution - backup and depress the option and command keys, launch iPhoto and rebuild your database -- if the iPhoto rebuild does not cure the problem then download iPhoto Library manager and use its rebuild command which creates a totally new library leaving the existing one untouched
If you have deleted the photos then you need to start over with a new library and import the photos you have not deleted into it
You can select one of the problem photos and use the reveal original in finder commander (file menu) to see if the original is there - if it is a finder window will open showing it
LN

Bridge does not show my Camera Raw Adjustments in previews or thumbnails.

Bridge CS6 on my Mac is not showing my Camera Raw adjustments in a preview pane or thumbnail.
Here's how it worked until recently:
I open a .CR2
I make some adjustments
I click "Done"
The thumbnail and the preview show the adjustments I made
Now, it works like this:
Open a .CR2
Make adjustments
Click "Done"
The preview and thumbnail don't show all the adjustments. I can't see the results of noise removal, but I can see a drastic change in Exposure
If I double-click the CR2 file, it opens in Camera Raw, and I see all my adjustments, including noise removal.
Here's what I've tried, but saw no difference (I restarted Bridge every time):
Purge Cache
Purge Cache for Selection
Replaced Camera Raw plug-in as described here: Camera Raw 8.4 | No metadata or Camera Raw edit
     (Doing so made Camera Raw disappear in Bridge, so I restored the original file)
Reset Preferences
Reset Standard Workspaces
All the above fixes were inspired by this thread: Re: Bridge CS6 not showing Camera Raw adjustments
Why don't I see the noise removal effect in the previews? I am sure I saw it a few weeks ago. I rely on that, to help me sort and cull photos.
I'm hoping there's a preference toggle that I accidentally changed. It's definitely a puzzle. (Version: Bridge CS6 5.0.1.21 5.0.2.4)
Message was edited by: moonatwork after updating Bridge version. I tried all the above fixes again, after updating Bridge. It actually got worse. I tried replacing the Camera Raw plugin, which failed as before. I then restored the previous plugin, as before, but Bridge now fails to honor the preference, "Double-Click Edits Camera Raw Settings in Bridge" and instead always opens Photoshop.

Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
My specs:
Bridge CS6 5.0.2.4
Mac OS X 10.6.8
16 GB RAM
65 GB free disk space
2 monitors, 2 graphics cards:
ATI Radeon HD 4870
Type:    GPU
Bus:    PCIe
Slot:    Slot-1
PCIe Lane Width:    x16
VRAM (Total):    512 MB
Chipset Model:    NVIDIA GeForce GT 120
Type:    GPU
Bus:    PCIe
Slot:    Slot-4
PCIe Lane Width:    x4
VRAM (Total):    512 MB

Preview icon not showing when in thumbnail. (Sketchu

Hello,
I recently updated my MBP to Yosemite and installed sketchup on it.
The preview icon of my sketchup files are not showing when in thumbnail. But as i increase the size of the icon from thumbnail in viewoption i.e from 64px x 64px to 124px x 124px it shows. So my icon is shown as blank without any app logo. Also when i change my view from thumbnail to coverflow or something it shows. Otherthan thumbnail everything works.
So where is the error in it?
Please help...
Thanks
Amar

Try the standard fixes:
- Rest. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. - Restore from backup
- Restore to factory defaults/new iPod.

HT4101 I am trying to connect my JVC Hard Disk Drive Camcorder to my IPAD 2 via the Apple camera kit. I am able to down photos, but video files not showing. Camera shows Mass Stoarge. How can I download videos please.

I am trying to connect my JVC Hard Disk Drive Camcorder to my IPAD 2 via the Apple camera kit. I am able to download photos, but video files not showing. Camera shows Mass Stoarge. How can I download videos please?

The file name only has 6 characters and I'm not sure what the .mod format is. So that's why they are not seen by the iPad.
Another way to transfer. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom
Look at this link for convertion the .mod format.
http://www.makeuseof.com/tag/convert-mod-camcorder-video-format-mpg-instantly/
Message was edited by: Texas Mac Man

Hi, My Lightroom CC is showing waiting for connection and the mobile sync is not working. I have tried deleteing lrsync data, disabling firewall, checked host file etc. Still no luck.

Hi, My Lightroom CC is showing waiting for connection and the mobile sync is not working. I have tried deleteing lrsync data, disabling firewall, checked host file etc. Still no luck.

I had the same problem. It fixed itself when I opened Internet Explorer (I don't normally use it). I was opening Support Portal to get some support help, but I'm not sure if it was the page or simply opening IE that did the trick.

I just got the new ipod touch (5th generation) and it will show up on my computer but it will not show up on itunes and it won't connect. Please help!

I just got the new ipod touch (5th generation) and it will show up on my computer but it will not show up on itunes and it won't connect. Please help!

See:
iOS: Device not recognized in iTunes for Windows
You need iTunes version 10.7

HT201413 Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

Device does not work when I connect it to my computer to the iTunes program update requests and then gives me an error No. 21

HT3743 my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!

my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!

If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808

Need to send my back up email a reset security questions email but the option does not show when I click on password and security

Need to send my back up email a reset security questions email but the option does not show when I click on password and security

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97456)

My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?

My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?

Thank you for the sugestion, but it was working fine both on the lock screen and on my home screen. I check all my settings and it is how it was from Friday, when I got the iPhone 5s. It just stop working. The only way I can fix it is by shutting down the phone. It will work for a while, then it won't.

Can iTunes open and not iPhoto when iPhone connected?

When I connect my iPhone 5 to my iMac, iPhoto opens and I have to manually open iTunes. Is it possible to have iTunes open automatically and not iPhoto when I connect the iPhone?

Go to preferences of each program and set it up however you like.

Thumbnails not showing when camera connected and ready to import

Similar Messages

Maybe you are looking for