Thumbnails not visible in Library Grid View

In LR 1.0 on Mac OS X, after converting from Beta 4.1, my thumbnail images are not visible in the Library Grid View, except for just a brief moment when I first click on a Folder (Shoot) name. The images then disappear, leaving just the background.
Double clicking on an image background brings up the image correctly in Loupe View.
Did I miss something in the conversion?
Many thanks!
(Mac OS X 10.4.8, Dual 2 GHz PowerPC G5, 6.5 RAM)

Hello,
I have a similar problem, (windows xp)
Besides the thumbnails not being visible, when I open LR 1.0, it shows my folder structure as imported, with the number of files per folder, but right after that, the folder names start to gray out, and the number of pictures in each folder goes to "0" . The pictures are still there.
For each keyword it shows 0 pictures, until I click on that keyword, then it shows the number of pictures for that keyword.
I did uninstall 4.1, and deleted the database, I don't know if this is related to some left over Beta 4.1 somewhere in there.( my old identity plate still shows) I had no issues, other than being slow when using beta 4.1, I had only imported pictures on a as needed basis( in 4.1), and not the whole folder structure. ( as I want to do with LR 1.0 )
Any solutions ? ( other than uninstall and trying to to a better job of cleaning up, before re installing ? )
P.S. about 1000 files ( jpg,tiff,psd) did not get imported due to errors, but most of them were in my 4.1 library with no problems.
P.S 2 the keywords were entered either in bridge or ID imager, and written back to the files, I never used beta 4.1 to enter keywords, just used it to search them.
P.S 3 ( sorry this is getting too long...) it crashed on import 5 times, about 20,000 files, internal HD just for pics.
thank you,
Fabio Ventura

Similar Messages

  • Bug: thumbnails not displaying on library grid view

    Since using v1.0 the thumbnails will not display on the grid view (there is simply a grid of empty grey squares which can be clicked on). All beta versions worked fine. I started a new library with no improvement. All other screens work as expected. Using Windows XP SP2. Any ideas?

    joel, I'm experiencing the same issue - the thumbnails start to appear but once they get to the point where they would be fully loaded, they disappear. I used beta as well, and that worked perfectly fine. Just sent in a ticket to the customer support at adobe, hopefully they can help with a solution. I'm only running the trial version of lightroom.
    Where you able to figure out a solution?

  • Cannot move photos via drag and drop (library grid view)

    I've seen several adobe tutorials and youtube videos that show moving photos or folders by drag and drop in the library grid view.  I cannot get it to work.
    Steps:
    1. Mousedown on a photo (not the frame) in the grid
    2. Drag the mouse to a folder in the "Folder" pane (left of the grid)
    3. Mouseup on the destination folder
    Results:
    Nothing happens.  The mouse cursor doesn't change from the arrow.  There is no indication I can drag and drop.  The photos are not moved.
    The photos are stored on a NAS.  Of course I can move them around via Windows Explorer, but I want to do this from inside LR4 for obvious reasons.  From LR4, I can create new folders, but I still cannot move photos into those folders.  I also tried creating a new folder on a local drive.  Again, I was able to create the folders, but was not able to move any photos into the folder.
    What else can I do to toubleshoot this issue?

    I created a new catalog.  Imported a folder on my C drive, created a subfolder, and successfully moved photos into the subfolder.
    I tried the same steps in my original catalog and now I can move all photos (including those on my NAS).  I've been at this for 3 hours.  I have no clue why it is working now, but I guess I'm happy.  Now, it shows the stack of photos when I try to drag and drop.
    I even reverted to my original preferences file (that I backed up before deleting) and I'm still able to move the files.  Really strange.

  • BPM worklist app views are not visible in IPM task viewer

    Hi,
    we upgraded our system from 11.1.1.3.0 to
    weblogic 10.3.5.0
    SOA 11.1.1.5.0 with BPEL processes
    ECM with IPM and UCM 11.1.1.5.0
    after upgrade i have problem with profiles in IPM task viewer page. Views are created in BPM worklistapp and all users can see tasks assigned to them there. But those views are not visible in IPM task viewer page (i tried it using driver page). Because of missing profiles/views users can't see and process tasks assigned to them. In log files isn't raised any error message.
    Everything was working before upgrade. Can someone help me with this? What can i have wrong there?
    Thanks a lot in advance for any help
    Edited by: 914063 on Jun 20, 2012 12:56 PM
    Edited by: 914063 on Jun 20, 2012 12:57 PM

    Hi Renuka,
    There are basically two ways to create an ADF UI for a BPM Task:
    1. Generate it from the task
    2. Create a ADF Taskflow based on Human Workflow Task
    Since I tell this by heart, I might be slightly wrong in the terms.
    You probably want to try the second option. It is accessible from the "New Gallery". You'll have to provide the Human Task from the BPM project, but then you can build up the ADF Taskflow by your self, based on the customizations of the rest of your application.
    Should not be rocket science for someone with ADF11g experience. Since it is not my dayly job, I need to figure it out every time again ;). But I did it in the past and it wasn't so hard.
    Regards,
    Martien

  • Header Data badi button not visible in webdynpro portal view

    Hi,
    We have implemented  "HRHAP00_ADD_HEADER  " for fetching additonal data for appraisee in objective setting appraisal.
    Badi is fetching data and show button " Additoanl data " in  R/3 view , but the button is not visible in ESS, MSS view.
    We are  using Webdynpro platform.
    Has anybody face similar kind of problem in webdynpro?  how to address this.
    regards
    Pallavi

    Hi Ana,
    Standard button is available info  but it is not showing cutom fileds.
    Technical resources has made zimplementation of standard badi header data, but when we try to attach it to templte id doesnt show button.
    regards
    Pallavi

  • Movie thumbnail previews in Coverflow and Grid view...not there

    I'm using Snow Leopard and have both QT-X and QT 7 Pro on my MacBook Pro.
    In Finder, I have a folder containing several movie types including mpeg, avi, mov, qt, m4v, mp4, flv and wmv
    I've noticed that I don't see thumbnail previews for any of these movies and wondered if anybody else can see their thumbnails, either in Grid View or Coverflow
    In 3-column view, the thumbail appears once the file is highlighted.
    In iTunes, the thumbnail also appears (for those that can be added to the Library)
    I also have the latest Perian and Flip4Mac apps installed.
    I've tried re-launching Finder after deleting the com.apple.quicklook.plist file
    Thanks

    I also tried this (deleting the Quicklook cache) and no luck, still the same issue.
    I did a clean installation and this works
    However, I did again the installation and imported my USER profile in FULL via the assistant when you first configured Snow Leopard (using an FULL BACKUP copy and/or Time Machine Backup) and then problem reappears
    I have reinstalled DivX, Desinstalled RealPlayer deinstalled Perian and still the same issue. I cannot see the Thumbnails or the Cover Flow of the video/movie file such MPG, MPG, AVI, WMV but it works for MP4 I have for my IPod
    I finally gave up and left this last installation and I did not have the energy to migrate my data, emails, settngs, etc manually.
    By the way, the upgrade from Leopard 10.5.8 towards Snow Leopard 10.6 was smooth but the performance was awful specially after installing 10.6.1. With the upgrade I had the same issue with my USER account or with any, NO THUMBSNAILs for most of my videos enough though they are played correctly in Quicktime and Quicklook....
    Any help????

  • Previews are not visible in library mode or import mode.

    I downloaded LR2 and imported my catalog from LR1.0. It looks like the photos are there but no previews / thumbnails. I have uninstalled and reintstalled but still have the same problem. The really strange thing is when I click to open in CS3 the photo will open. I just have no idea what I am opening because all I can see in LR is the grid view with grey squares.
    I am running vista could this be part of the problem? I can not see any of the previews even when I try to import from a memory card, internal file, or card reader. I see the same grey squares during the import process that I see in the library.
    I could never get any of the 1.x upgrades to work on my computer so I have stuck with 1.0.
    I really hope someone can help me, I love LR and really do not want to have to find another program, but LR just seems to be very fragile on my system.

    You have two problems. I. the preview in the import pane is not shown. This is very typical on windows and has to do whether your system has an interpreter for the RAW format you are trying to import. I believe microsoft makes a n addon that reads more raw formats and most camera manufacturers provide a plugin to do this.
    II. No previews displayed in Lightroom. I remember some people had this problem. There are two possible causes of this. A. a bad monitor profile - this is very common on windows and can be fixed by recalibrating. B. an outdated display driver. Lightroom will show behavior like this if the display driver is no good. Check if MS or the maker of your display card has a newer driver available.

  • No images in Library grid view

    Hi,
    In V1.0, when I set my Library to grid view I only see my images for a short while. Then all images turn to grey squares. Updating the grid (like changing thumbnail size or sorting order) again shows images only for a short while.
    Loupe and Compare view are ok.
    Never had this with the Beta versions.
    Is there a setting I need to change?
    Thx,
    Haya

    See info for this at
    LR Extras FAQ.
    Don

  • Smooth scrolling in Library (grid view)

    The scrolling has been greatly improved in grid view. It feels not slugginsh anymore (I do have one of the latest iMac + SSD) at rendering the thumbnails.
    However, the view is still not using the smooth scrolling hability in Mac OS: it scolls by steps which is very annoying because it is perfectly smooth when grabing the view between thumbnails.
    Romain

    See info for this at
    LR Extras FAQ.
    Don

  • After EM agent installation, only database is not visible in EM Grid Contro

    Dear All,
    I am using Oracle 10g2 database. I have a problem with EM agent configuration. After installation the database (SID=BITEX) is not visible in the EM Grid Control, which is installed on the other host. Listener, ASM and host are visible and show actual state, only database instance is missing . Below, I attached some output from the listener, agent and targets.xml
    Thanks fro any advice
    Groxy
    Output from "lnsnctrl status":
    oracle@bitex2:~/product/10.2/db_1/bin> lsnrctl status
    LSNRCTL for Linux: Version 10.2.0.2.0 - Production on 05-DEC-2007 14:33:35
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bitex2.bitex.com.pl)(PORT=1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 10.2.0.2.0 - Production
    Start Date 05-DEC-2007 14:17:14
    Uptime 0 days 0 hr. 16 min. 21 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /opt/oracle/product/10.2/db_1/network/admin/listener.ora
    Listener Log File /opt/oracle/product/10.2/db_1/network/log/listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=bitex2.bitex.com.pl)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
    Services Summary...
    Service "+ASM" has 1 instance(s).
    Instance "+ASM", status BLOCKED, has 1 handler(s) for this service...
    Service "+ASM_XPT" has 1 instance(s).
    Instance "+ASM", status BLOCKED, has 1 handler(s) for this service...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "BITEX.WORLD" has 1 instance(s).
    Instance " BITEX ", status READY, has 1 handler(s) for this service...
    Service " BITEXXDB.WORLD" has 1 instance(s).
    Instance "SA BITEX NEX", status READY, has 1 handler(s) for this service...
    Service " BITEX _XPT.WORLD" has 1 instance(s).
    Instance " BITEX ", status READY, has 1 handler(s) for this service...
    The command completed successfully
    oracle@ bitex2:~/OracleHomes/agent10g/bin> ./emctl status agent
    ./emctl status agent
    Oracle Enterprise Manager 10g Release 10.2.0.2.0.
    Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
    Agent Version : 10.2.0.2.0
    OMS Version : 10.2.0.2.0
    Protocol Version : 10.2.0.2.0
    Agent Home : /opt/oracle/OracleHomes/agent10g
    Agent binaries : /opt/oracle/OracleHomes/agent10g
    Agent Process ID : 22193
    Parent Process ID : 22177
    Agent URL : https://bitex2.bitex.com:3872/emd/main/
    Repository URL : https://grid. bitex.local:1159/em/upload
    Started at : 2007-12-05 14:25:46
    Started by user : oracle
    Last Reload : 2007-12-05 14:25:46
    Last successful upload : 2007-12-05 14:33:32
    Total Megabytes of XML files uploaded so far : 1.84
    Number of XML files pending upload : 0
    Size of XML files pending upload(MB) : 0.00
    Available disk space on upload filesystem : 50.69%
    Last successful heartbeat to OMS : 2007-12-05 14:33:51
    Agent is Running and Ready
    /opt/oracle/OracleHomes/agent10g/sysman/emd/targets.xml
    <Targets AGENT_TOKEN="05b0697c77651ee3933abf6fa56180dd62c4be3b">
    <Target TYPE="oracle_emd" NAME="bitex2.bitex.com.pl:3872"/>
    <Target TYPE="host" NAME="bitex2.bitex.com.pl"/>
    <Target TYPE="oracle_database" NAME="BITEX.WORLD">
    <Property NAME="MachineName" VALUE="bitex2.bitex.com.pl"/>
    <Property NAME="Port" VALUE="1521"/>
    <Property NAME="SID" VALUE="BITEX"/>
    <Property NAME="OracleHome" VALUE="/opt/oracle/product/10.2/db_1"/>
    <Property NAME="UserName" VALUE="f614471b2cb8c5b7" ENCRYPTED="TRUE"/>
    <Property NAME="password" VALUE="0d16396a5b89b576b58f90a69cbd2c55" ENCRYPTED="TRUE"/>
    <Property NAME="ServiceName" VALUE="BITEX.WORLD"/>
    </Target>
    <Target TYPE="oracle_listener" NAME="LISTENER_bitex2.bitex.com.pl">
    <Property NAME="Machine" VALUE="bitex2.bitex.com.pl"/>
    <Property NAME="LsnrName" VALUE="LISTENER"/>
    <Property NAME="Port" VALUE="1521"/>
    <Property NAME="OracleHome" VALUE="/opt/oracle/product/10.2/db_1"/>
    <Property NAME="ListenerOraDir" VALUE="/opt/oracle/product/10.2/db_1/network/admin"/>
    </Target>
    <Target TYPE="osm_instance" NAME="+ASM_bitex2.bitex.com.pl">
    <Property NAME="SID" VALUE="+ASM"/>
    <Property NAME="MachineName" VALUE="bitex2.bitex.com.pl"/>
    <Property NAME="OracleHome" VALUE="/opt/oracle/product/10.2/db_1"/>
    <Property NAME="UserName" VALUE="SYS"/>
    <Property NAME="password" VALUE="0d16396a5b89b576b58f90a69cbd2c55" ENCRYPTED="TRUE"/>
    <Property NAME="Role" VALUE="SYSDBA"/>
    <Property NAME="Port" VALUE="1521"/>
    </Target>
    </Targets>

    I don't see where your listener hostname matches hostname for your agent, thus agent discovery might have issue putting two and two together. Thus, the need to add it manually, or adjust it in targets.xml file first.
    reference
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bitex2.bitex.com.pl)(PORT=1521)))
    Agent URL : https://bitex2.bitex.com:3872/emd/main/

  • Configuration tab not visible in the costom view created.

    HI All,
    My requirement is:
    To create a view in the standard component : BT301i_lam (Financial service item level).
    For this i followed following steps:
    1> Added item component through EEWB.
    2> Enhanced the component BT301I_LAM to add a custom view which will show the required details created through EEWB.
    3> Now problem is , after view creation , the "CONFIGURATION" tab is not visible in the view.
        Also , in the runtime repository (where i can add my view to the overview page) i am not able to find the view.
    Can anyone please tell me on where i went wrong.Please also provide the correct steps to add a custom view so as to show attributes added through EEWB.
    Thanx.
    Edited by: abhishek ranjan on Mar 25, 2011 10:48 AM

    Hi,
    Try with the below code in .HTM .
    <%@page language="abap" %>
    <%@extension name="thtmlb" prefix="thtmlb" %>
    <%@extension name="chtmlb" prefix="chtmlb" %>
    <%@extension name="bsp" prefix="bsp" %>
    <chtmlb:configTable actionsMaxInRow       = "3"
                        displayMode           = "FALSE"
                        allRowsEditable       = "TRUE"
                        downloadToExcel       = "FALSE"
                        enableTableGraphics   = "TRUE"
                        id                    = "table"-------you can give your table id
                        onRowSelection        = "select"
                        personalizable        = "FALSE"
                        selectedRowIndex      = "<%= X->SELECTED_INDEX %>"
                        selectedRowIndexTable = "<%= X->SELECTION_TAB %>"
                        selectionMode         = "<%= X->SELECTION_MODE %>"
                        table                 = "//X/Table"
                        usage                 = "ASSIGNMENTBLOCK"
                        visibleFirstRow       = "<%= X->VISIBLE_FIRST_ROW_INDEX %>"
                        visibleRowCount       = "25"
                        width                 = "100%"
                        xml                   = "<%= controller->configuration_descr->get_config_data( ) %>" />
    REPLACE X WITH YOUR CONTEXT NODE.
    Regards,
    Gangadhar.S
    Edited by: gangadhar rao on Mar 25, 2011 1:47 PM

  • Xcelsius 2008 Object Browser not Visible but checked on View menu

    I have lost the Object Browser window.  It is checked on the View menu.  Even when I first start up Xcelsius it is not visible.  Does anyone have any idea how to make it visible again?
    Thanks,
    Karen

    Hi Karen,
    Can you goto view and uncheck the option for Object browser and then re-check it again?
    Also let me know if this behaviour is happening from the time you have installed the product?
    Thanks,
    Amit.

  • YouTube thumbnails not visible on Safari

    The thumbnails on YouTube are not visible on Safari. The videos play fine. The automatic seach suggestion isn't working. Also, I can't expand the video player to the medium size; I can watch in full screen and the smaller video player size. Everything is fine in other browsers such ad Google Chrome. I tried uninstalling Adobe Flash Player and reinstalling the latest version. I don't remember installing or changing any settings that might have caused this to happen. I am using a MacBook Pro Version 10.6.8. Help me please!

    You can make the user agent fix work permanently in all windows/tabs from terminal with this:
    defaults write com.apple.Safari CustomUserAgent "\"Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:11.0) Gecko/20100101 Firefox/11.0\""
    Note that there's a SPACE between "rv:11.0)" and "Gecko" The string is what you get from the Develop menu in Safari if you hover your mouse over one of the settings.
    You can turn this off and revert to "normal" behaviour with:
    defaults delete com.apple.safari CustomUserAgent
    if you use this trick and pick any IE user agent setting, GMail will break if you use it from Safari, that's why I've picked the Mozilla setting.
    Hope this helps until a proper fix comes along.

  • Small Bug : People detection - O key does not return to the grid view

    Windows 7
    When I hit the O key, I go into the face detection module.
    But when I hit th O key again, I do not come back into the grid view.
    To do so, I have to click on this icon to return to the grid view.

    Grid View is always G key

  • Yosemite: Thumbnails not visible in Finder

    I ran into a strange problem immediately after updating to Yosemite.
    I have a 2014 mbp dual-video, 16 gb ram.
    In any folder on my drive icons are not visible. They are there, I can drag and copy-paste folders and files, but the finder only shows a blank white window. Everything looks normal in List, Columns or Cover Flow modes.
    I did a safe mode boot and restarted normally and everything went back to normal, including visible icons. But now I have the problem with an external ExFat drive. Anyone know how to solve this or what's going on?

    Here's my problem, that continues with newly created folders. You can see that this folder has 5 items in it, with one selected. But they are not visible when Finder is set to icon mode.
    Also, when I drag a corner of the Finder window to make it bigger, i get some "dragging" visual artifacts that are not visible in the screenshots but appear on my screen.

Maybe you are looking for