Thumbnails truncated

Why are my thumbnails truncated, showing only middle of photo w/ jagged edges? Can't find a preference to eliminate it.

For help please share some information - liek versions of iPhoto and the OS - what recentlhy changed - what you mean by "truncated"
The only time I've seen this is on Panoramic photos where the whole photo does not shoe in the thumbnail
LN

Similar Messages

Truncated (incomplete) Page-Thumbnail View (6.03)

On my Windows XP 64 machine that is running two 1920x1200 monitors via NVIDIA Quadro FX 4600 with the latest drivers I am having the following problem: in both Acrobat and InDesign the page thumbnail views do not show all of the thumbnail whatever the settings or the proportions of the view. E.g., in InDesign the bottom portions of the thumbnails is not visible and the scroll bar not shown with Show Vertically on in Options and the slides on the right of the window are not shown with Show Vertically off.
This is most inconvenient as I am having to resize the window every time I want to find the missing slides.
Anyone else is seeing this and what might be the reason/remedy?
Thanks

I don't see that the behavior you describe in the ID pages panel is related to a bug in how Acrobat displays page thumbnails. I seriously doubt that the two are using any code in common, and you describe truncated thumbnails, while the referenced thread describes thumbnails as completely omitted.
If your point was that there might be a bug in ID that is causing your problem, it doesn't seem likely as it hasn't been reported here previously that I can recall, and a problem with the display of the pages panel would have generated a LOT of comment by now. Try replacing your preferences or udating the video driver.

On images that are long and narrow horizontally, iPhoto truncates them and automaticall crops off part of each end of the image. How can I make it stop?

On images that are long and narrow horizontally, iPhoto truncates them and automatically crops off part of each end of the image. the thumbnail has a jagged, serrated edge at both ends. How can I make it stop?

Then I do not get your problem - you can import the photo - you can find the photo and you can edit and save the photo - what more do you want?
By defination thumbnails are small images to help you find the large image - the large image is fine and you can find it fine - and you know it is only showing part of the image because of the "jagged ends"
If you think think that iPhoto should display long thumbnails suggest to Apple - iPhoto menu ==> provide iPhoto Feedback
as to your digital photoframe - contact them - in general gital photos frames display one and only one aspect ratio and any photo that is not in that aspect ratio will be modified to display - either cropped to the proper size for the frame or have 'White" space added to fill the frame - that function is totally controled by the Digital Photo frame and any otptions you have will be in the manual or on the support web site for the frame - to put it in old film terms - you can not put an 8x10 print in a 5x7 frame unless you cut the photo down (or a 8x15 photo in an 8x10 frame either)
LN

Enable video file and image file thumbnails WITHOUT enabling thumbnails for other filetypes

Hello. I am new to Mac and pulling my hair out at some of the limited UI options
I am wanting my image-files and video-files to appear in Finder (desktop etc) as thumbnails
However, I DON'T want PDFs, Excel, Word, PowerPoint files to have a preview thumbnail
Basically how things are now either way, it's very cumbersome visually to distinguish between file-types while cruising around my folders with a quick glance.
if thumbnail previews are on for all, its hard to tell at a quick glance which are PDFs, Excel files vs. images
similarly, the little "pdf" or "xlsx" or "docx" text overlay on these previews is so small and non-color coded as to be useless for quick-glance recognition of which filetype
if thumbnails are off, it's impossible to glance at files in a folder and know which image or video each is without wasting my precious miliseconds clicking on them, or trying to actually read truncated filenames
Here are some possible solutions which I hope somebody knows how to do:
globally enable or disable icon previews by filetype (preferred)
stipulate adding overlayed mini icons to certain filetypes
example: if it's a pdf, show the icon preview, but overlayed on that would be the red Adobe pdf icon/logo roughly a quarter of the size of the file icon (like is possible in Windows 7).
this way image and video previews can be seen at a glance, but having a big red or green or blue logo makes for immediate recognition of filetype
(least prefered but could help) ...somehow change the font color and increase the font size of the overlayed "pdf" "xlsx" "doc" "pptx"currently standard on these filetypes while showing icon preview but ALL are miniscule black text no matter which filetype
I'm quite dumbfounded right now that something for better immediate-glance filetype recognition isn't standard, or at least easily Google'able. All I've found is the Either/Other bamboozle.
Would love it to hear of a solution for this. Thanks all.

Put all of your separate flash movies into one move, and then
use flash to
load the movies into a top section of the flash document.
Your site (this page) sounds like it would be best viewed
entirely in Flash
(at least easiest w/o reloading).
Jon
"zachmundy" <[email protected]> wrote in
message
news:earmgn$q95$[email protected]..
>I have a bunch of flash videos that i've created
thumbnails for. I have
>one
> big cell on the top of the page that displays a video
and a bunch of small
> cells below that hold the thumbnails and descriptions of
other videos.
> When a
> user clicks on one of the videos, I want it to load that
video into the
> large
> cell on the top of the page all without
regenerating/refreshing the page.
> Is
> this possible in dreamweaver? What do I need to code the
thumbnail
> buttons to
> do in order to make this happen?
> Thanks
>

Image looks truncated in viewer and canevas

Hi there,
I am begining a new SD project in which I imported a QT sequence that was generated with Mpegstreamclip.
I chose easy settings mode in FCP.
In both viwere and canevas, the image does not look "centered".
As a matter of fact, it is truncated on the right side and when I play the sequence, a vertically moving blueish-greenwish band appears on the right side.
I have checked that the sequence plays all right in MPEG streamclip.
By the way, if I import another sequence that was shot with a HD photocamera, 16:9 format, a blueish band also appears on the right side.
What could be the problem ?
It is the first time I see that
Thanks in advance
Ivan

The image on the left in PS looks the same in Picasa Image
Viewer (I selected it to be color managed based on the monitor profile), looks the same in Windows Image Viewer, and looks the same in the thumbnail. The image on the right in LR is how the picture looks when I look at my image in Firefox but in Internet Explorer and in Chrome, the image looks like the image on the left in PS. The image below shows how the thumbnail looks different from the actual picture when it's double clicked and viewed in Picasa. The thumbnail (which shows the subjects having green skin) would be how I saw it online while the double clicked version is how I saw it in PS, even though it was sRGB (I checked the image properties to make sure of the color space).
I have a ATI 5470 GPU on my ASUS 17.3 inch laptop. Not sure about the drivers.

How to get panel to display thumbnails sized to layer bounds instead of relative toentire document??

There is an option for this, but it only partially works...and was wondering if there is something else I'm supposed to know about to make the feature work as described...?
I can turn on the option to display thumbnails .. bit in only works for bitmapped stuff. None of my vector masks are shown at the size of their layer. (Note -- I have layer shaped by transparency set to off -- meaning the layer is shaped by the vector mask and not any content. This is confirmable by turning on the option to show layer bounds).
Yet, when I do this, it's obvious on the larger screen (if layer bounds are showing), that the vector takes up the full layer. But in the thumbnail, I often can't even the shape at all -- not very helpful.
So what am I missing? How do I get the vector thumbnails to display the size of their layer?
Thanks!

That's definitely NOT the case in Photoshop...
If you use the 'move tool', and you have "show transform controls turned on', it will show you the
corners of the layer -- the actual size of the layer...
You can verify this by going in and and creating a paint layer, say 1000x1000.
Now create a shape some small fraction of that... Any closed vector and attach it to the
layer, with Layer->Mask->Vector.
now check out the size in 'move tool' -- it will be 1000x1000.
Now go into image blending options and uncheck 'transparency shapes layer'.
Now, the layer is shaped by the vector -- not the transparent edges where your canvas ended.
Now, if you use move tool, you will find the 'corner' of the layer positioned around the vector, not
around the 1000x1000 layer you just created.
To round out the demo, save a copy of your mask if you want, and go into the mask panel
and select 'vector'. At the bottom, of the panel there is a tiny graphic of an arrow pointing down
onto a 'plane', (or layer). indicating to apply the vector mask to the layer. Do so.
Now go into blending options and recheck the 'transparency shapes layer.'
Try move again... Now note the bounding box is the SAME size as it was with the vector
attached... because you truncated the rest of the layer with the mask. You now have a smaller
object... that is that size... (I know... all this is very basic to a community professional), BUT
my point now, is that if the outline box that small bitmaped shape w/o the vector mask is only
say 100x100 (vs. before it was 1000x1000... and if it's the same size as BEFORE you
applied the mask WITH the vector there (but shaped/w/transparency off). Then I would assert
that the since the outline box is showing the size of the layer -- the size of the layers are the same.
Therefore, the vector takes up the full size of a layer that is shaped by that vector mask.
p.s. has Mylène put out any hits since your pseudo?

Slideshow, Thumbnails& MovieClips Oh My!

I would like to create a thumbnail scrollbar where there is a
panel of thumbnails (SlideShow1, Slideshow2, Slideshow3, etc) which
are MovieClips populated from external jpgs. The Movie clip also
needs to be able to display a description of the thumbnail. I want
to be able to click on the thumbnail and load a movie (SlideshowMC)
into the big picture area
To put it visually:
| |
| |
| |
| SlideshowMC# |
| |
| |
|___________________|
{Scrollbar <<<<<
MC.Slideshow1[ThumbPic1 and ThumbDesc1]
MC.Slideshow2[ThumbPic2 and ThumbDesc2] MC.Slideshow3[ThumbPic3 and
ThumbDesc3] MC.Slideshow3[ThumbPic4 and ThumbDesc4]
>>>>>Scrollbar}
Any help would be appreciated

Here is the code I have in place for the thumbnails, is there
a way to truncate this?
function loadThmb() {
_level0.myMCL.loadClip("Pix/thmb0.jpg",
this.panelTop.thmb0.MC_thmbPic);
_level0.myMCL.loadClip("Pix/thmb1.jpg",
this.panelTop.thmb1.MC_thmbPic);
_level0.myMCL.loadClip("Pix/thmb2.jpg",
this.panelTop.thmb2.MC_thmbPic);
_level0.myMCL.loadClip("Pix/thmb3.jpg",
this.panelTop.thmb3.MC_thmbPic);
_level0.myMCL.loadClip("Pix/thmb4.jpg",
this.panelTop.thmb4.MC_thmbPic);
_level0.myMCL.loadClip("Pix/thmb5.jpg",
this.panelMid.thmb5.MC_thmbPic);
_level0.myMCL.loadClip("Pix/thmb6.jpg",
this.panelMid.thmb6.MC_thmbPic);
_level0.myMCL.loadClip("Pix/thmb7.jpg",
this.panelMid.thmb7.MC_thmbPic);
_level0.myMCL.loadClip("Pix/thmb8.jpg",
this.panelMid.thmb8.MC_thmbPic);
_level0.myMCL.loadClip("Pix/thmb9.jpg",
this.panelMid.thmb9.MC_thmbPic);
_level0.myMCL.loadClip("Pix/thmb10.jpg",
this.panelBot.thmb10.MC_thmbPic);
_level0.myMCL.loadClip("Pix/thmb11.jpg",
this.panelBot.thmb11.MC_thmbPic);
_level0.myMCL.loadClip("Pix/thmb12.jpg",
this.panelBot.thmb12.MC_thmbPic);
_level0.myMCL.loadClip("Pix/thmb13.jpg",
this.panelBot.thmb13.MC_thmbPic);
_level0.myMCL.loadClip("Pix/thmb14.jpg",
this.panelBot.thmb14.MC_thmbPic);
(The MCL is on a Master swf which loads all the other
movies)

Canon5d problem processing to jpegs, files corrupt or truncate

I'm baffled. I am using both CS2 & CS3. I have a mac dual 2.0 with OSX 10.4.11. The camera is a Canon 5d. Here's the deal. When I batch process or even single process, some of the files develop truncated. The thumbnails have between 10% to 90%of the image visible, it varies. There is no pattern, sometimes it does every file sometimes maybe 1 out of 10. Some files still open as Jpeg's others have the file corrupted message and then open exactly like the thumbnails, a portion of the image the rest grey. If I try developing the image again, it usually corrects on the first try, sometimes 2nd or 3rd, it always eventually develops complete. This does not happen in the canon raw conversion but I don't like it. I had all the current updates in both CS2 and CS, I just reinstalled CS3 without updates, still does it. I tried it using a 10d, no problem. I have 5.5 gigs of memory. Any ideas? Thanks Lance.

Re routine maintenance:
I still advocate Repairing Permissions (with Apple's Disk Utility) before AND after any system update or upgrade, as well as before AND after installing any software that requires an installer that asks for your password.
I have seen software installations go sour because the installer did not find everything as and where it should be.
I have also seen software installations go bad because the installer did not clean up after itself properly and did not leave everything as and where it should be.
This is just my own personal opinion and practice based on my own observations. Others may disagree and that's OK. I can only base my routines and my advice to others on my own experience and conclusion. I don't pretend to know why others believe otherwise.
Repairing Permissions after the fact (i. e. not immediately before and after an install) may NOT help. Try it anyway, though.
====
Additionally, if your machine does not run 24/7 so that it runs the daily, weekly and monthly Cron Scripts in the middle of the night as intended by Apple, run Cocktail (shareware) as well.
Cron Scripts are maintenance routines designed by Apple to run on a daily, weekly and monthly basis in the middle of the night.
If you don't run them, you WILL run into trouble, sooner rather than later.
Here's an excerpt from the Apple tech doc http://docs.info.apple.com/article.html?artnum=107388
Mac OS X performs background maintenance tasks at certain times if the computer is not in sleep mode. If your computer is shut down or in sleep at the designated times, the maintenance does not occur. In that case, you may want or need to run these manually.
Mac OS X periodically runs background tasks that, in part, remove system files that are no longer needed. This includes purging older information from log files or deleting certain temporary items. These tasks do not run if the computer is shut down or in sleep mode. If the tasks do not run, it is possible that certain log files (such as system.log) may become very large.
Also, from: http://docs.info.apple.com/article.html?artnum=106978
The disk activity generated by find is a normal part of file system maintenance, used for tasks such as removing invisible temporary files that are used by the system. It is scheduled to occur early in the morning at 03:15 everyday, 04:30 on Saturdays, and 05:30 on the first day of each month.
NOTE:
There have been comments to the effect that Apple "fixed" this in 10.4.2 and later versions of the OS, but I have not been able to verify this to my satisfaction. The reference in the 10.4.2 release notes are far from explicit on this subject.
= = =
If you have DiskWarrior, run it regularly too.

Hi can u please help me out to display multiple [b]thumbnail images[/b]

hi,
hi,
please help me out!
please help me out!!
I need to display multiple thumbnail images on the jframe or on a jpanel . From the database where the path of the images are stored
say i should first get thumbnail of the images and then display
any one can please give me the code
Thanx and Regards

What is the context you're asking these questions in? Are these interview questions? Homework questions? Or is there some underlying business problem you're trying to solve?
user644700 wrote:
Create Query to restrict the user to a single row.                     I don't understand the question. You may be trying to create a VPD policy for the table, but that is far from clear from the question.
Query to get the first inserted record FROM a table.                Probably not possible in general. Oracle doesn't track the date at which a row was inserted.
Concatenate a column value with multiple rows.                          Again, I don't understand the question.
Query to delete all the tables at once.                You'd need dynamic SQL. And a definition of "all tables"-- are you talking about all tables in a particular schema? All the tables in multiple schemas? Something else? Does "at once" imply that you want things to run in parallel? And does "delete" really mean delete (a DML operation)? truncate (a DDL operation)? or drop?
SQL Query for getting Orphan Records.You'd need a definition of "orphan record" and requirements for what the parent and child tables are. The normal approach to finding parent and child tables dynamically would leverage foreign key constraints, but that would generally preclude the presence of orphan records.
Justin

Captions truncated in Slide Show mode

I have a web site that I designed using iWeb 08, and like to use the full 7 line captions for pictures in some gallery pages. This works fine in normal viewing mode, but I also have Slide Show enabled; when you try to view in this mode, the black square pops up, showing the picture and controls, and works OK except for one thing: you only see about 3 lines of the caption, and there seems to be no way to scroll it.
Does anyone have any insight on this, or know whether there is some obscure setting that I have missed, which would allow viewing the entire caption in Slide Show mode?
Thanks

Justin, I am having the same problem as you. I will look into what Cyclosaurus is saying to do, but it is probably a bit complicated for my brain. One thing you can do without any coding, is to space down your captions 3 or 4 times on the page where the full size version of your picture is. Then, your captions will not have a line through them when viewing in the slideshow mode that includes the thumbnails. Also, the full truncated captions will not appear in the true slideshow. I have the first line showing and then I spaced all the rest of the description down. It is hard to explain, so here is an example that I am working on for a friend. http://www.karenmardis.com/TheJewels/Pages/The_ExpressionsCollection.html One thing to note, your page has to be at least as tall as what the longest caption will need. It's a bit clumsy but it worked for me. Hope that is helpful.

How / Why is audio being truncated

Basic Problem: All the audio on imported video clips is being cut off after approximately 7 secs.
Description:
I have a set of clips that were made on a Nikon Coolpix. They were imported firstly into iMovie where they played correctly. Then I imported the same clips into PRE.
I moved a couple of clips onto the timeline where they appeared to play correctly.
I started experimenting with a narration track, the narration coming from a USB mic.
I now find that the audio on the video tracks is truncated after about 7 secs, in other words the sound starts playing and then stops at about the 7 sec mark.
If I detach the audio from the video and look at the waveform you can see the first 7 secs as an expected sound waveform and then the display changes to a rectangular box with no sound waves. I tried to capture an image of the waveform, or lack of it but it appears that the waveform view is on the same level as the screen capture process so I can't capture the image.
All of the clips seem to be suffering from this problem suggesting that I must have changed something at the macro level to create this problem but I'm at a loss to know what would effect it.
I'd appreciate any pointers as to what might be the source of the problem and how I might correct it.
Thanks.
Background:
OS X 10.5.8
PRE 9.0.1

@ Bill Hunt
Hi Bill:
Thanks for the feedback.
After some trials I believe the "conforming audio" is not the problem (or maybe it is and I don' understand it). After importing a clip there is no indication that there is any processing going on - also there is a small 'P' in the lower right hand for the thumbnail. I can't find any explanation of what the letter 'P' means.
I removed all the offending clips and tried reimporting them but still ran into the same problem, even tried importing and letting it sit for an hour to make sure there was no processing going on that I couldn't detect - overkill I know. Didn't solve the problem.
I tried cleaning up the media cache via the preferences menu, after I deleted the offending files. Then reimported but to no avail.
I erased the project and all related files and repeated the whole process but still would not work.
What did work
I tried importing an older file from a different event, also a file from the Nikon, and found that it suffered the same problem.
So I converted the file to mpeg4, imported the converted file and it worked perfectly - the quality of the video appears somewhat degraded but the audio is complete.
I repeated this with a different process. Made the clip into a project in iMovie, exported it and then imported that file into PRE. It worked just fine.
Now I notice that sometimes when I import a file that come from the Nikon PRE asks me if I want to fix the quality.
So, in my naivety I'm guessing that this problem has something to do with the quality of the clip. I don't know much about these things but I understand that the extension mov could mask a variety of formats and so perhaps there is something that PRE can't digest very well in the file exported from the Nikon.
Thanks for the reference links, very much appreciated.

ORDImage thumbnail generation

Hi,
I have a table PICTURES containing a column PICTUREREF of type ORDSYS.ORDImage where the actual picture data resides on the file system. Is it possible to generate a thumbnail from it and store it to the file system, holding a reference to it in the table under a column THUMBREF of type ORDSYS.ORDImage?
All the examples I have reviewed so far deal only with local data pictures.
Thanks in advance and best regards,
Martin

Yes this is possible, using multiple steps. For sample code you want to combine the export() example with the thumbnail creation.
1. Create the thumbnail image initially as a local empty image (stored in the database)
2. use the processCopy method to scale the FILE based image to the thumbnail image
3. use the export method to write the thumbnail image out to a file on the file system.
4. truncate the lob data in the thumbnail to free up the database space, you can use the trimSource() object method or a dbms_lob procedure
eg. thumbImage.trimSource(ctx, 0); OR
dbms_lob.trim(thumbImage.source.localdata, 0);
5 change the source attributes of the thumbnail image to point to the file system image that you created in step 3. This will also implicitly call the clearlLocal() object method to indicate that the file is now stored outside the database - non-locally
e.g thumbImage.setSource('FILE', 'IMAGEDIR', 'thumbnail.jpg');
6. Finally update the thumbnail column in your table with this newly modified thumbnail image object.

[svn:fx-4.x] 15099: Setting truncateToFit to false so that chart labels would get scaled but not truncated if space is not enough

Revision: 15099
Revision: 15099
Author:   [email protected]
Date:     2010-03-29 07:00:06 -0700 (Mon, 29 Mar 2010)
Log Message:
Setting truncateToFit to false so that chart labels would get scaled but not truncated if space is not enough
QE notes:
Doc notes:
Bugs: FLEXDMV-2359 (Axis labels are clipped in sdk 4.1, since label is used instead of UITextField)
Reviewer:
Tests run: checkintests
Is noteworthy for integration:
Ticket Links:
    http://bugs.adobe.com/jira/browse/FLEXDMV-2359
Modified Paths:
    flex/sdk/branches/4.x/frameworks/projects/datavisualization/src/mx/charts/AxisRenderer.as

Welcome to the forum Oreckel!
The best way to work with FCP's media files is to not overthink it. It's all done from the "Scratch Disk" settings. Just select a DRIVE for media captures and renders to go to. FCP handles the rest. It creates a folder called "Capture Scratch", another called "Renders" and a third called "Audio Renders". In each of these folders it creates a folder for each project file containing the media that is associated with that particular project, and it names these folders the same as your project files' names. Couldn't be easier.
Autosave Vaults, Waveforms, and Thumbnails should be kept on your startup disk in your documents folder. You probably already have one there named "Final Cut Pro Documents" If it's there just select the Documents folder and FCP will put these three folders in the one named "Final Cut Pro Documents".
Jerry

In Photoshop Express, cannot sort images in album by filename in thumbnail view (for slideshow)l.

In Photoshop Express, I want images to appear sorted by filename. In the "view as a table" it sorts fine. When I revert to the thumbnail view, the arrangement is random. The dropdown "show" list does not offer an option for showing by filename. If I select the"custom" option, it means I would need to sort 300 images by filename MANUALLY (!!!), a job that a computer does in milliseconds. Anyone with a solution? Thanks.

fwiw, with my images in the 'Folder Location' view the photos are in order by their Windows filename. That is the same order as the hardcopy album the photos came from. So I then created a PSE Album. I selected all my photos and moved them into that album. The order of the pictures was retained in the Album. That worked out great. I wanted my PSE images to be in the same order. I thought I would do it with tags. But creating an album seems to work just fine.

Print a report on doc format truncate data

hi
I have a report launching with a form in an oracle applications, when I print a report on pdf format looks ok
but when I print the same report on doc format truncate data on left and right side.
Can you help me
thanks

Hi Herbe
Reports does not support .doc format. Are you referring .rtf format?
In any case, you must contact Oracle Support to get the issue resolved.
Regards
Sripathy

Thumbnails truncated

Similar Messages

Maybe you are looking for