Thumbs.db

Have windows xp and photoshop cs3. Thumbs.db just showed up in the bridge. Don't know how it got there. What should I do with It?

Nvslater,
It is by design, that Windows creates this file (see John's post #6 for a way to keep it from happening), whenever one selects View>Thumbnails in Windows Explorer. If you delete it, you'll get a message, that it is a System File. If you do not set your Folder Opitons (post #6), and then go to Windows Explorer, hit View>Thumbnails, it will be re-created.
As has been said, it is normally hidden in default installations of Windows and Bridge. Since I turn ON all Hidden/System files in view, I see this little guy, all of the time, but I want to make sure that I know, and can see, every file in any folder, so I do not delete, say a text file, or something more serious, while I'm managing folders in an image viewer, like Bridge.
Hunt

Similar Messages

How can I move photos from my computer to a Thumb drive?

How can I move photos from my computer to a Thumb drive?

https://discussions.apple.com/message/16881894#16881894
2 way to get the icon...
Finder>Preferences>General, check what you want to show on Desktop.
Finder>Preferences>Sidebar, check what you want to show in the Sidebar of all windows.

Prepare an usb thumb drive, to boot windows 7 or 8 in UEFI mode

Purpose of this post:
Prepare an usb thumb drive, to boot windows 7 in UEFI mode and install the system in pure UEFI mode.
Why am I writing this:
I had a hard time finding out how to make a custom installation of windows 7 in pure UEFI mode, and avoid using the factory restore disks. After hours of research, experiments etc I finally got the point and found a solution. And I'm happy to share my research with you. I hope this will be of help. If something is not clear, or more information is needed, I will be glad to explain things further.
History:
As most of you already know, BIOS was developed for PC in early eighties and has remained unchanged in recent years. But, since 2000, Intel started working on a new firmware interface, called Extensible Firmware Interface, abbreviated EFI. And since 2005 United EFI Forum has been handling the responsibility for development, management and promotion of UEFI specifications. Bigger companies like Intel, AMD, Microsoft and Dell have already started to bring out their products in accordance to UEFI standards which has more stable, secure and easier to use interface.
How does UEFI works (in a nutshell):
Once you power on the UEFI based PC, the Pre-EFI is executed which initializes only the CPU, memory and the chipset. This followed by Driver Execution Environment (DEX) where other hardware is initialized.
Advantages of UEFI:
    It can integrate various drivers this will not require to load during booting so saves time.
   PC can connect to network without OS.
   Also integrated drivers allow rendering GUI based control panel which out dates the old school bluish BIOS screen.
   Not all the installed hard drives are scanned as boot drive is set during the installation of OS in UFFI.
   Applications like anti-virus and diagnostic tools can be stored on virtually any non-volatile storage devices attached to a PC.
For a system to boot and install in UEFI the partition table of the HDD should be GPT (GUID Partition Table), not the old school MBR (master boot record). GPT has many advantages, can have virtually an unlimited number of partitions (windows will allow only 128) and impressively big partitions.
Since UEFI has a lot of advantages why not having a system install and boot in UEFI mode? AFAIK new Lenovo notebooks/netbooks are UEFI capable and OS’s are already installed in pure UEFI mode.
So, let’s go now to the point. Do you want to have more control over your HDD? Let say, you have a 320GB HDD and you have divided it in two partitions, one of 50GB, for your Windows 7, and the remaining for your data. If something goes wrong and you need to restore your system to factory default, with the recovery disks, it will wipe your partition scheme, set the system to default and this way your data will be lost.
You may want to make a “vanilla” installation of windows from a USB thumb drive and avoid using factory recovery disks. Now here things get complicated. A standard preparation of the USB with Microsoft’s software (Windows 7 USB/DVD Download Tool), or other tools, will give you a bios installation, not a UEFI one. So for the system to boot, you will need to change some settings in bios, and changing it from UEFI to legacy bios. The installation will prepare the HDD in MBR partition table, and you will lose all the advantages of UEFI, described above.
Now this can be avoided, by properly preparing an USB to boot and install in UEFI mode. Here are the steps:
Step by step tutorial:
1.   In a windows computer, download a legal copy (although trial) of the windows 7 os. You can do this from here: http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Be sure to download the same version that came preinstalled in your computer. For example, if you have a Lenovo x120e, with a Windows 7 professional, 64bit, download an iso image of the Windows 7 professional 64bit.
2.   Once downloaded burn the iso to a USB thumb (at least 4GB) using Windows 7 USB/DVD Download Tool.
3.   After preparing this, create a folder on your computer, name it whatever (i.e. W7pro64bit). Go to the root of your USB
and select all the files and folders there (9 in total) copy, and paste to your folder you created, W7pro64bit.
4.   Using windows format the usb again in FAT32. Windows 7 USB/DVD Download tool, formats it in NTFS. We need a FAT32 formatted disk to achieve our goal. Formating again the USB in FAT32 will not touch the MBR of the USB thumbdrive. And after copying back the files (see step 6) the USB will still be bootable. (nice, and simple, isn't it?)
5.   Now go to the folder W7pro64bit and do the following:
a.   Browse to W7pro64bit\sources\ and open install.wim file. It’s a big file, and can be opened as an archive with 7zip (free software). Do not extract it, do not modify it, just browse the file with 7zip. Just to be sure you do not mess with that file, you can copy it somewhere else in your computer, and than procede.
b.   Browse this file (install.wim) to \1\Windows\Boot\EFI\ and locate the file bootmgfw.efi. Do not move, delete it, but just drag that file to the desktop. (if you have copied the file install.wim to another place in your computer, than you are safely do whatever you want with that file ) Close the 7zip program to release the install.wim file.
c.   Rename the file you just copied to the desktop from bootmgfw.efi to bootx64.efi.
d.   Now go back to w7pro64bit folder and browse \efi\Microsoft. Form there copy the folder boot and paste it one level up, on the folder: \efi. It will look like this: \efi\boot.
e.   Now copy the file you saved on your desktop and renamed (bootx64.efi) to \efi\boot (inside the boot folder you copied on step 5d
6.   Now go to the root of the folder W7pro64bit and select all folders and files (9 in total) copy, and paste all those files back to your USB thumb drive. (see step 4 for more info)
7.   Go to the computer that you are going to reinstall, and before restarting it, use the program ABR (activation backup and restore) to backup the license of your windows os. (use google to find ABR). Advanced Tokens Manager (ATM ) is great too. This link may be of help: Backup and restore W7 activation. After the program finishes its magic, it will create a few files inside the folder where the program itself reside. Copy these files to a new folder in your usb. Rename it to ABR so you will quickly find it later. (if you decide to use ATM, the procedure may be a little different. But you are smart enough to figure out how to use it)
8.   Backup to an external storage all your data before continuing.(reminder: are you sure you saved the license as explained in step 7, to a safe place? To a external drive, to another computer? If you are sure, than go on with step 9)
9.   Now restart your laptop, and enter your bios settings. Go to the boot settings, and set the computer to boot in UEFI only. Not both, not UEFI first, or legacy, BUT UEFI only. Save and restart.
10.   Press f12 (or the corresponding key for your machine) to choose the boot device and chose to start from the USB thumb drive with your windows 7 pro 64 bit.
11.   If everything is done correctly, your computer will boot from the USB.
12.   Follow the wizard and choose a custom install, not upgrade. At the disk partition window delete all the partition you see there until you have only one unallocated space.
13.   Select it, and click next to install windows, without making partition in this point. The installer will create a GPT partition table not a MBR since the USB booted in UEFI mode.
14.   Immediately after the first restart remove your USB thumb, and the installation will continue from the HDD. Wait until installation finishes.
15.   When you will be finally on your desktop, on the installed OS plug your USB go to the ABR folder and click on restore.exe. It will restore your license and your copy of windows will be activated.
16.   Now you can go in computer management/disk management and shrink the HDD to create your partitioning scheme. Make sure to leave enough space to your windows os. (30gb or more for extra programs you will install at your choice)
17.      Download from lenovo.com thinkvantage system update and update your system. Windows update too can install all the necessary drivers, if you need only basic drivers support.
Note: if tvsu will fail to work, see this:
http://forums.lenovo.com/t5/ThinkVantage-Technologies/ThinkVantage-System-Update-Servers-down-the-wh...
It may look a looong tutorial, but once you do this for the first time, it will look a piece of cake.
Final words:
From now on, you can install windows 7 in UEFI mode with your special USB without changing your partition scheme anymore. If you have a data partition beside your os partition (see the example above), when you reinstall the system using your USB thumb drive, at the disk partition window chose the partition where windows is installed, delete it, and reinstall windows to the unformatted area. Your partition with your data will be intact and the installation will automatically mount your data partition to the system. And, all the scope of this procedure, you will always have a pure UEFI installation of the system, with all its benefits.
Have fun!
abvasili
Moderator note: changed subject to match new content. Was: Prepare an usb thumb drive, to boot windows 7 in UEFI mode
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

seanare wrote:
Thank you, as I noted here, your post was the key to my getting a Windows 8 SecureBooting setup on a W530.
In the case of Windows 8, I needed to copy the files away, reformat my USB key as FAT32 and copy the files back, and viola I was able to boot from my USB install media with the BIOS set to only boot UEFI. From there, there rest was easy (for Windows 8, the copying and renaming is not necessary, the key is having a FAT32 partition on the USB media, rather than an NTFS one; the EFI files are already in the right location).
Thank you again good sir.
You are welcome... and I'm happy that the change of the file system helps with windows 8 too. Thanks for confirming that.
abvasili
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

We have a PC with iTunes that needs the hard drive reformatted. Right now, it can't connect to other computers on the network. Can I save my music to a thumb drive, then re-load when the computer is reformatted?

We have a Windows XP desktop with iTunes for windows. The hard drive needs to be reformatted. Right now, the computer will not connect to other computers on the network. Can I save my iTunes songs to a thumbdrive, then re-load after reformatting? How do I do it?

Copy the entire iTunes folder out to the drive. If it is too big to go as one copy stuff over to another computer in batches. It is important to have not only the media but the library file in order to properly restore your library.
See also this User Tip. Assuming the machine won't connect to the internet you could download the SyncToy installer on another machine and then transfer it with the thumb drive. If it will connect to the net don't forget to deauthorize the machine before reformatting the hard drive.
tt2

Disk Utility - Won't Repair Flash/Thumb Drive

So my Mac froze for some reason, while my Kingston thumb/flash drive was in. I tried to eject it, but I could only force eject (which it said may cause issues). After that, whenever I put the thumb drive in, it said something like the drive won't work and I had to copy the files to my desktop. When I go into disk utility and click repair disk, it says this: "Disk Utility stopped repairing “UNTITLED 1”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
I can't erase the thumbdrive, because it says I need a source, which I don't know what that means.
Can anybody help? The files are useless now as I have transferred them to a CD, so I'm fine with erasing the whole thing. And yes, I know I can get a new on at any store for cheap, but I'd like to know if this can be repaired. Thanks.

You haven't mentioned how the thumb drive was formatted to begin with; is it GUID partition map and Mac OS Extended (Journalled), or is it FAT 32 with MBR partition map?
If it's the latter, DU can't repair it, but should be able to format it. However, the forced ejection may have damaged the file system to prevent that.
If it's FAT32, re-format it on a PC and try again on the Mac.
If it's Mac formatted, you could try erasing and reformatting on another Mac (or as Hackintosh says, from the DVD), but if that doesn't work, try the PC route; reformat to FAT32 on a PC (if the PC will recognise it - thay don't always), then go back to the Mac, repartition and format.
If that fails, it's recycling fodder.

Does the iPhone 5s scan thumb even when setting is turned off?

Call me paranoid but I will not get my thumb scanned anywhere. I don't really trust that they won't sell the information anywhere or at least to the NSA. Does anyone know how the button works, the code? Can anyone confirm that the button does not scan only when you choose that option. That is why I've been hesitant to upgrade from my iPhone 5. I guess I could always someone mod the phone to have a clickable button again. Thanks!

Reading this makes me feel a little better. Still would probably put a piece of tape over the home button just in case. NSA won't have a chance!
Secure Enclave
"Touch ID doesn't store any images of your fingerprint. It stores only a mathematical representation of your fingerprint. It isn't possible for your actual fingerprint image to be reverse-engineered from this mathematical representation. iPhone 5s also includes a new advanced security architecture called the Secure Enclave within the A7 chip, which was developed to protect passcode and fingerprint data. Fingerprint data is encrypted and protected with a key available only to the Secure Enclave. Fingerprint data is used only by the Secure Enclave to verify that your fingerprint matches the enrolled fingerprint data. The Secure Enclave is walled off from the rest of A7 and the rest of iOS. Therefore, your fingerprint data is never accessed by iOS or other apps, never stored on Apple servers, and never backed up to iCloud or anywhere else. Only Touch ID uses it, and it can't be used to match against other fingerprint databases."

I would like to know how to take photos from IPhoto and put on thumb drive?

Would really appreciate the help of anyone who might know how to do this.

Select the photo or photos you want to put on the thumb drive. then click on file export. then fill in any information you want on the export window. kind jpeg would be the best. medium would be the best the under file name give it a name so you can find the pic on your thumbdrive. the click export. the next window will say save as, so give it the file a name probably the same file name you gave it on the other screen then the next line says where and thats where yoy select your thumb drive, it will usually display the brand of thumb drive you have. if it is already there select ok and your done. if the name is not there hit the arrow at the end of the line and look for the name of your thumb drive and select it then select ok. hope that helpls.

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

Yes, junker thumb drives pour like rain in the market.
Which makes are working on your Air, and which arent?
Stick to Sandisk and a couple of other reliable mfg. of memory sticks

I have backed up my library to a thumb drive, how do I install it on a new computer?

I have backed up my itunes library to a thumb drive, how do I install it to itunes on a different computer?

Copy the ENTIRE iTunes folder from the old computer to the new computer.

I updated to Firefox 4.0.1 and can no longer use the thumb/finger spreading feature on the trackpad of my Mac Powerbook (Mac OSX 10.6.7) to enlarge text on websites. How do I restore this function?

I updated to Firefox 4.0.1 and can no longer use the thumb/finger spreading feature on the trackpad of my Mac Powerbook (Mac OSX 10.6.7) to enlarge text on websites. How do I restore this function?

* [/questions/777886]
Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the about:config page.
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
You can use the Filter bar at to top of the about:config page to locate a pref more easily.

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now som

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now some of my images have disappeared from Light room 4.4, but I can find them in CS4 and Bridge now shows some thumb nails as images and some as an icon with CR2. I have spent two weeks going through preferences etc. to find how to resolve my problem. Please can you Help? Meany thanks in advance
Derek Randall

I don't use LR and rarely use the bridge so I can not answers about thumbnails in them, However thumbnails in windows file explorer and windows dialog for CS2 files will only show if you have installed codec into windows that will produce them. Windows does not do CR2 thumbnails on its own. I use FastPictureViewer Codec package for RAW File and PSD files thunbmail support.

I am trying to download lion with the thumb drive how do i back up my files is time machine good enough or must i transfer everything to my hard drive

I am trying to download lion with the thumb drive how do i back up my files is time machine good enough or must i transfer everything to my hard drive

A erase of the drive or boot partition is not always necessary.
Flashing question mark at boot could be a easy fix, sometimes it's the firmware that simply forgot what bootable volume to boot from.
Try holding the Option key down while booting the machine, a choice of bootable options appears, select your OS X and boot up.
When you get in, head to System Preferences > Startup disk and set it again new. This will tell the firmware what to boot from. Test it to see.
Now if you don't have a selection of bootable options, it could be that the drive is dead, or OS X is erased or corrupted so it can't boot.
You'll have to run through this list of fixes to see what's going on, if you need a hardware fix or what, I've also included links if you can't fix it and need to recover your data etc.
(If it's not remmebering your boot selection then also run through the list to reset things.)
Step by Step to fix your Mac

I need a way to get usb thumb-drive securely recognized as a apple keyboard

I posted this question over at Developer Discussions also, just to get more eyes on it, not to be disruptive.
So, I would like to utilize a maximum-length Admin. password (255 characters?) without having to manually type it in each time I login, install/update software, or for any other reason. The perfect situation would be some type of script or software installation onto a USB pen drive (2 gig sony)which is inserted into the macbook (via usb) when the Leopard Login screen appears. It logs me in, then, afterwards, it creates a clickable icon on the desktop that achieves the same goal (entering a long admin password securely). And all of the above is achieved using the built-in security of Keychain access, without having to continuously mount and unmount the drive.
Searching google produces many expensive products that do not fit: Securikey, omnikey, smart cards, tokends, and on and on. They seem to have figured this out at microsoft - not that it matters much, except that it appears to be possible.
One problem is that a USB thumb drive is not mounted until after login, it seems, but, I plugged in a friend's usb apple keyboard from the year 2000 and was able to type in my password at login. And, an email reply elsewhere suggested writing a daemon (that constantly runs in the background of the operating system) that could recognize the drive and accept a script from it that inputs the password and executes the 'enter' command.
I don't know how to write daemons yet, but I can stumble around a bit with bash and applescripts, and I can copy any Xcode project out of a book and make it run properly. I'm a beginner.
This project might create security issues for my operating system, but I'm really not concerned about that because this is a computer I don't rely on and can safely perform experiments on. And I would like to use this as an opportunity to learn - so I'm going to give it a whirl anyway - unless someone has already accomplished something similar. In that case, why reinvent the wheel and plug it into the wall, eh?
Basically I am asking for help. Any suggestions would be greatly appreciated.

You don't need to get deep into programming to do much of this.
launchd, the background process that's responsible for launching most of the background processes on your machine, has the ability to launch a script based on disk mount events.
StartOnMount <boolean>
This optional key causes the job to be started every time a filesystem is
mounted.
So you could create a LaunchDaemon script that watches for a disk mount. When a disk is inserted your script is fired off. You'd need to perform some verification to ensure the disk is, indeed, your USB stick and not some other device, then it can trigger the rest of the login process. Off hand I'd look to osascript to run an AppleScript-based keystroke, but there may be other ways, too.
One big question relates to securing your password. Clearly you can't store it in the script, so you'd have to read it from somewhere. You also can't store it on the USB stick unless you somehow encrypt it (otherwise someone can just look at the files on the USB stick and get your password), but AppleScript can use the keychain, too, although I'm not sure what keys would be available prior to login, so it requires some experimentation.

How do I transfer an iphoto library from a guest login to either another login or a thumb drive?

I am letting a friend use my computer as a surrogate for the time being to backup her phone and photos. I had never used the guest login before and didn't realize that all the files would be lost at logout. I haven't logged out yet but I need help trying to get the iphoto library onto a thumb drive. If at all possible I would like to get the backup from itunes as well.
I have already copied all of the photos out of iphoto but that doesn't save the time, date and location of them. I cannot access the folder to move the iphoto library because of it being in the guest login. I have already deleted the photos off of the phone so that is a no go.
I've been trying to search for an answer but haven't had any luck yet. Any help would be greatly appreciated.

have already copied all of the photos out of iphoto but that doesn't save the time, date and location of them.
Export them
File -> Export
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

Why do I get scars on my thumbs using iPhone 5s, without scratches on the screen/ on the phone

I get scars on my thumbs using my iPhone 5s. I had a 3GS, but did not get it then! Please help! The phone is in good shape/condition

If the iPhone5s is new you could take it in to an apple store and see what they can do.
What I would do is carefully run my fingers along all the metal edges, in both directions, feeling for a nick or sharpness. If i found the nick I would gentley rub the nick with a metal object that is rounded.
Another solution is to put on a iPhone case that covers the outside edges.

OS 10.8.5 won't let me open mail on thumb drive

Lots of people have posted at various times in the discussion groups that they have had problems accessing their mail, getting the message "You can't use this version of the application 'Mail' with this version of OS X.'"
I have mail from my old Mac Mini backed up on a thumb drive but when I tried to look at it, I got the message above plus "You have 'Mail' 4.6."
There are suggested fixes to this issue when it arose after 10.6 but I don't see anything about 10.8.5 which I thought was going to take care of it.
All suggestions welcome.

Try going to Mail/Import Mailboxes and see if you can get them into Mail.
Import Mailboxes

Thumbs.db

Similar Messages

Maybe you are looking for