Thunar taking its sweet time to open an external disk

Hi
This problem only occured after a full system upgrade, so I'm not sure where to begin with the debugging. After the full system update, when connecting an external USB drive, the first time I try to access it, Thunar basically hangs for a good 30 seconds. All instances of Thunar freeze. After around 30 seconds, it displays the contents of the drive. Any subsequent accesses are fine.
This issue seems to be limited to thunar, because I could access the contents of the disk instantly via console and my audio player could access the files instantly too. So this happens only with thunar, on the initial access, after mounting the drive. This seems to only affect the externel USB2 HD. I can access optical disks instantly.
As I said, it didn't happen before I did a complete system upgrade.
Perhaps it's kernel related? Maybe I should try dropping back to kernel 2.6.21 ?
I've even compiled my own custom vanilla, patch free 2.6.22.1 kernel, no change.
Any ideas? Anyone else experiencing this? Thanks

I found the older kernel 2.6.21 on the Duke install CD. You can find them on some mirrors, like: ftp://archlinux.puzzle.ch/iso/
To downgrade a package:
Go to the folder where you have the package stored, then "update" the package to the older version:
pacman -U package.tar.gz
If you want to hold a package at the installed version, add tha line to /etc/pacman.conf
IgnorePkg = packagename (e.g. kernel26)
I hope this helps!

Similar Messages

Sites Taking too much time to open and shows error

hi,
i've setup sharepoint 2013 environement correctly and created a site collection everything was working fine but suddenly now when i am trying to open that site collection or central admin site it's taking too much time to open a page but most of the time
does not open any page or central admin site and shows following error
event i go to logs folder under 15 hive but nothing useful found please tell me why it takes about 10-12 minutes to open a site or any page and then shows above shown error.

This usually happens if you are low on hardware requirements. Check whether your machine confirms with the required software and hardware requirements.
https://technet.microsoft.com/en-us/library/cc262485.aspx
http://sharepoint.stackexchange.com/questions/58370/minimum-real-world-system-requirements-for-sharepoint-2013
Please remember to up-vote or mark the reply as answer if you find it helpful.

Discoverer report taking too long time to open.

HI,
Discovere reports are taking too long time to open. Please help to resolve this.
Regards,
Bhatia

What is the Dicoverer and the Application release?
Please refer to the following links (For both Discoverer 4i and 10g). Please note that some Discoverer 4i notes also apply to Discoverer 10g.
Note: 362851.1 - Guidelines to setup the JVM in Apps Ebusiness Suite 11i and R12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=362851.1
Note: 68100.1 - Discoverer Performance When Running On Oracle Applications
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=68100.1
Note: 465234.1 - Recommended Client Java Plug-in (JVM/JRE) For Discoverer Plus 10g (10.1.2)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=465234.1
Note: 329674.1 - Slow Performance When Opening Plus Workbooks from Oracle 11.5.10 Applications Home Page
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=329674.1
Note: 190326.1 - Ideas for Improving Discoverer 4i Performance in an Applications 11i Environment
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=190326.1
Note: 331435.1 - Slow Perfomance Using Disco 4.1 Admin/Desktop in Oracle Applications Mode EUL
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=331435.1
Note: 217669.1 - Refreshing Folders and opening workbooks is slow in Apps 11i environment
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=217669.1

Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

SAP GUI taking too much time to open transactions

Hi guys,
i have done system copy from Production to Quality server completely.
after that i started SAP on Quality server, it is taking too much time for opening SAP transactions (it is going in compilation mode).
i started SGEN, but it is giving time_out errors. please help me on this issue.
MY hardware details on quality server
operating system : SuSE Linux 10 SP2
Database : 10.2.0.2
SAP : ECC 6.0 SR2
RAM size : 8 GB
Hard disk space : 500 GB
swap space : 16 GB.
regards
Ramesh

Hi,
>i started SGEN, but it is giving time_out errors. please help me on this issue.
You are supposed to run SGEN as a batch job and so, it should be possible to get time out errors.
I've seen Full SGEN lasting from 3 hours on high end systems up to 8 full days on PC hardware...
Regards,
Olivier

My email all of sudden is taking a long time to open

Since last week my msn.com email is taking a long time to open I haven't changed a thing and I have had this email since 1998

How large is your hard drive and how much hard drive space do you have left?
Which Macbook Pro do you have?
Which os & version are you using?

My mac pro is taking a long time to open files

When I rey and open applications like Finder, it is taking a long time to open or it hangs how can I fix this
I have OS10.7.2 and 300GB left out of 500GB.
Mac book peo 17
Message was edited by: waldoamt

How large is your hard drive and how much hard drive space do you have left?
Which Macbook Pro do you have?
Which os & version are you using?

I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard. Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard. Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

Hi there,
I found that Time Machine in Mavericks will sort it all out for you. You shouldn't need to buy another backup drive, unless you have insufficient space left and can't afford to delete whats on there. It should just work fine.

Can I use time capsule as an external disk only (not as a wireless router)

how can I use my time capsule as an external disk only. I have had problems with time capsule as a wifi router.

Sure.. but it is still a network drive and must use wireless or ethernet.. the best way is plugged into the main router in bridge mode.. but you can use it in secondary network.. although the setup is more complicated.
It is also less good than a simple external drive.. which is cheaper, faster and more reliable. Consider if the TC doesn't suit your needs get rid of it and opt for simple external drive.

Forms taking very long time to Open

Hello Everyone,
can i know the reasons why forms are opening very late. Its taking very very long time to open.
Regards
Rajesh

Hi,
Have a look at this post :- Very large Input form-how to handle
Cheers
John
http://john-goodwin.blogspot.com/

Mozilla is taking to much time to open i have clear all history but still i have a same problem ??

when i try to open Google its take to much time to load when ever i open any site i.e http://oxter.in then it will take to long time to open and after 5 min its say "No Page Found" then i try that same url in Chrome and its work. please sugesse me what to do.

Start Firefox in [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Safe Mode to Troubleshoot the issue] and to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

My external library 100 GB on a 2TB drive is taking a long time to open.

Hey there,
I recently moved my library to an external drive. When I tried to load the external drive, it said it needed to repair and I let it happen overnight because it was taking a long time.
Now it seems to just freeze when I try to load the external library. Can someone let me know if there is something I can do to make this process speed up? Should I move some of my projects to another library and keep it off-line?
Thanks,
Austin

Could it possibly be due to videos stored in the aperture library? I think one of the folders has multiple GB of video... Just a thought.
If Aperture is freezing on opening, this can be caused by corrupted or incompatible media, but it would not explain the original error message your reported - "permissions".
When the repair finishes, try to launch Aperture with the Shift-key held down. This will defer the generation of previews. If media cannot beprocessed, Aperture will hang, when it tries to generate the previews for those images or videos. If you can get Aperture to launch after deferring the preview generation, you could open the Activity window (Window > Show Activity) and then selectively try to generate previews for your last imported images and videos (Photos > update preview). The Activity window will show, what is currently processed, and perhaps you can spot, which of the files is causing the hang.

Mail taking a long time to open?

Seems like Mail is taking an unusually long time to open with this upgrade. And it is not remembering my mobile me password. Any fixes?

See
Why is my computer slow?
Step by Step to fix your Mac

WebI Report is taking too long time to opening

Hi All,
When iam trying to open the WebI report in Infoview , it is taking long time to open and refresh,
Please suggest me a solution.
Thanks in advance..
Regards,
Mahesh

Hi,
As the issue you are facing is that the webi report is taking too long to open and refresh, I would recommend the below steps.
1. Check whether the webi report is set to "Refreh on Open" if yes probably you need to uncheck, save the report and open it again.
2. Try to run the same query in the backend database and see if it returns the data.
3. Try to run refresh the report for a smaller data selection.
4. make the report run on a specific webi server, and when refreshing have your BOBJ admin monitor that process to see if the process is going in a hung state, using High memory etc.
5. restart webi process and run again
Thanks,
aKs

Enterprise Manager is taking to much time to open.

Hi ! there i am using oracle 10g for linux .I did some practice on backup and Recovery after that whenever i tried to open my Enterprise Manager it takes to much time to open.plz help me .
thanks

Hans is right. " Use this forum to report broken links or general feedback about Oracle documentation. This forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions will not be answered. " is what is under the forum title. There are some very knowledgeable people who frequent these forums that do not visit all of them but restrict themselves only to those forums in which they have some expertise. You stand a better chance of getting a quick answer if you post in a forum related to the question you are trying to get answered.
Tom

Thunar taking its sweet time to open an external disk

Similar Messages

Maybe you are looking for