Thunder Bug under iMac G5 display

A thunder bug has found its way in to my iMac and managed to get behind the display!!! It moved around for a little while but has since died and is now annoying the **** out of me as I have what looks like a line of dead pixels!!
Is there an easy way to open the iMac's display and remove the dead bug? I understand that opening up my iMac will nullify my warranty. Or is there a shop/service that I could contact to help me remove this unwanted visitor?
Any advise or similar accounts more than welcome...
Cheers,
J

have you tried taking the back cover off? for instructions see: http://manuals.info.apple.com/en/imacG5allModelsBackCover.pdf
also, is it still under warranty or apple care? usually if you just take it into your local apple store retail location, the genius bar can help you...

Similar Messages

  • THUNDER BUGS IN DISPLAY!

    In the recent hot weather I have gained 2 thunder bugs in my display. They are at different levels as one will appear in front of certain windows whereas the other will be behind them. They got in through the latch opening as I watched them parade along the top of my display with some of their mates who were crushed between my thumb and forefinger! They then swam around for a couple of days, got very drunk or drowned and are now dead in the my display graveyard. R.I.P.
    My laptop was one of the group recalled for faulty displays a couple of years ago as they were 'patching'.
    Does anyone have any ideas? Can it be dismantled/cleaned professionally? Do I need a new display? Will this require a second mortgage? Should I learn to live with and love the little critters? It is difficult as I am a graphic designer and am always stressed about marks on my display? Serious answers only PLEASE!

    Like i said you can probaly use those directions to get into the screen and clean it but dust is the main problem and trying to get the dust from inside the display ends up putting more there. But if its really bad you dont really have anything to lose worst case senario have a trained person to fix it or depending on its age get a new or used computer might be the better route. Did you ever send the computer in to have the faulty screen replaced?

  • I have a dead thunder bug, right in the middle of my screen and it's dead!!

    I have a dead thunder bug, right in the middle of my screen and it's dead!! It's so annoying - what can I do? How the **** did it get in there.

    Uhm. It crawled in there? Strange.
    If your laptop is still under warranty then bring it to an apple store. This way they will take it apart for you and you wont be voiding your warranty.
    If it's not under warranty, you could bring/call a apple store and see if they will do it for free.

  • How can I connect my TV sony bravia to Imac for display !

    How can I connect my TV sony bravia to Imac for display ! I did it before but a week ago crash my sistem and been to apple store london to fix it and wend I come home I can not reconnect the tv to imac ! please help !!!!!!!!!!!

    I BUY A CABLE FROM AMAZON.CO.UK AND MY iMAC WAS WORKING WITH THIS CABLE BUT AFTER THEY (APPLE STORE REGENT STREET ) REPARIT NOW IS NOT RECONICE THE DISPLAY !!!!!

  • Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

    Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
    im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
    is there a way to put the IMacs into display mode with out logging into my Mac mini first
    or is there a portable monitor that I can use that will not require me to login first

    This
    Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
    says:
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
    How do I exit TDM?
    To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
    Can I use a third-party keyboard or older Apple keyboard to enable TDM?
    Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

  • Using iMac as display.

    Has anyone had any experience with this? I ultimately want to get a PS3 and use my iMac to display it. It runs HD video from eyetv and downloads fine.

    I use one of these
    http://www.daystartechnology.com/AppleMac_Products/XLR8_Macintosh_Products/Mac_USB2_Video_Transfer_OSXPS.html
    but the input is composite (RCA connections) or S-Video. Not sure if that's what you are looking for.

  • IMac 24" display vs. 23" Cinema Display

    I'm hoping to get a new Mac for graphic design at work. I'd love to get a tower unit and 23" display, but I may need to save the company money and go for the iMac with maximum RAM. At home, I have a 20" Cinema Display with my G5 and a 17" iMac (all just prior to Intel conversion). The iMac display doesn't look as good as the Cinema Display.
    Can anyone tell me how the latest iMac 24" display compares with a 23" Cinema Display, as far as quality of what you see? Is the graphics card the determining factor?

    I can understand your predicament. The 24" iMac is a wonderful machine, but the Mac Pro is a creative dream machine that many in the industry rely on day in and day out.
    As far as the display quality between the two, they both carry the same standard Nvidia GeForce 7300 GT graphics card with 256MB of GDDR3 VRAM. So the quality of the graphics card should not matter much.
    In display size, the iMac has the clear advantage with one extra inch, and to tell you the truth, I think the quality of ANY display apple puts in their computers is superb. I for one, have a 17" iMac Core Duo (Early 2006) as my desktop and I feel that the display is great.
    Also look at the fact that the 2.33Ghz processor available in the iMac is really quite close to the 2.66Ghz in the Mac Pro, although you get twice the power in the tower machine.
    Unless you do a lot of heavy graphic design processes everyday, I would save the office some money and go with the 24" iMac. It really is a great value for a graphic designer.

  • MacMini to iMac 27" Display

    Can I connect an older Mac Mini (approx 2007) to a new iMac 27" display - I am about to purchase one but in doing so will be removing the PC/LCD monitor...
    So what options do I have or is this a non-starter?

    Which is why I suggested that I need the newer product:
    Note for iMac 27" users only: Even our box is capable of passing high resolutions up to 1920x1200, users of iMac 27" will only be able to get picture with resolutions up to 1280x720 (720P). The reason for it is that iMac 27" native resolutions are: 800x600, 1280x720 or 2560x1440 (since our box is limited to single link (1920x1200), and can't work with 2560x1440 it will take the next resolution down the list which is 720p. *We are working on AT-DP400 which will allow dual link resolutions (such as 2560x1440) to pass though*. For PS3 or Xbox users, you can use our converter without additional devices at only 720p resolution. Make sure to set 720p prior connecting it to the DP200.

  • My imac screen display is unfocussed, odd coloured and blurred (caused by rogue cate walking over keyboard).  I have no idea what settings have changed or what to check.  Any ideas?!

    My imac screen display is unfocussed, odd coloured and blurred (caused by rogue cate walking over keyboard).  I have no idea what settings have changed or what to check.  Any ideas?!

    It could be a number of keyboard shortcuts, here's a few.
    If the screen is zoomed,  hold CNTL and scroll down with mouse or trackpad.
    If screen looks like a negative,  hold down CNTL OPT CMD and click 8.
    Let us know how what other symptoms are shown.
    Regards,
    Captfred

  • My imac g5 display preference will not stay bright after bootup.

    My imac g5 display preference will not stay bright after bootup.
    Precessor 1.8 PPC G5
    2gb ddr sdram
    osx 10.5.8

    cwc wrote:
    My imac g5 display preference will not stay bright after bootup.
    Welcome to Apple's discussion groups.
    I'll presume that you can adjust the brightness after bootup. If that display preference is kept in PRAM, it's possible that the PRAM battery is wearing out.
    Here's what Apple says about what's stored in PRAM:
    http://support.apple.com/kb/HT1242
    To test that possibility, turn off "Set date and time automatically" in the Date & Time panel of System Preferences (if it's set), shut down and unplug your Mac, then let it sit for a few minutes. When you reboot it, check the system date and time. If the PRAM battery is failing, those may be set incorrectly.
    iFixit describes replacing the PRAM battery of an iMac G5 as of "moderate" difficulty. See these pages:
    http://www.ifixit.com/Browse/iMac_G5

  • Use iMac as display from other source

    Hi,
    I have iMac 27" with thunderbolt connectivity in it. Is it possible to connect an external computer (with or without a converter) to use the iMac's Display? If possible, kindly let me know how.
    Thanks & Regards

    make sure to get the right converter thou. If you want to connect your ps3 (example) via hdmi, there is a difference between a "minidisplayport to hdmi" and a "hdmi to minidisplayport". If you want to get input via hdmi you will need the "hdmi to minidisplayport" converter.
    edit: cmd+f2 on the one you want to use as a monitor.
    edit:
    http://www.apple.com/thunderbolt/ :
    And because Thunderbolt is based on DisplayPort technology, the video standard for high-resolution displays, any Mini DisplayPort display plugs right into the Thunderbolt port. To connect a DisplayPort, DVI, HDMI, or VGA display, just use an existing adapter.
    EDIT: after some googleling it seems that X423424X is right.

  • Looking for a broken iMac G4 Display with arm

    Hi, im looking for a broken iMac G4 Display with arm included, i need it for a school project, so if anyone knows where i could get/buy one please tell me. Thanks!

    Hi, there should be lots of iMac parts machines in fact I just looked at one auction a second ago.
    http://cgi.ebay.com/Apple-iMac-G4-1GHz-17-for-PartsW0QQitemZ200364020743QQcmdZViewItemQQptZApple_Desktops?hash=item2ea6a05407&_trks id=p3286.c0.m14&trkparms=65%3A12%7C66%3A2%7C39%3A1%7C72%3A1234%7C293%3A1%7C294%3A50
    You must be searching with the wrong keywords....
    Kevin

  • IMac Retina Display with CS6

    I just got an iMac Retina display monitor and my Creative Suite 6 applications all have blurry/pixelated text. I have tried to install the patch updates but still not luck fixing this issue. Is this a mac issue or adobe creative suite 6 issue?

    It's a combination of both and there is no fix. It doesn't even work 100% right in current versions of CC.
    Mylenium

  • [svn] 3149: Fix bugs introduced by the display object sharing optimization.

    Revision: 3149
    Author: [email protected]
    Date: 2008-09-08 16:58:35 -0700 (Mon, 08 Sep 2008)
    Log Message:
    Fix bugs introduced by the display object sharing optimization. This checkin should fix ordering problems when dynamically adding/removing graphic elements, and ordering problems when changing graphic element properties that require a display object (rotation, alpha, filters, etc).
    Bugs:
    MXMLG-219: BitmapGraphic component content always rendered from 0, 0 origin.
    MXMLG-220: setting visible property of Rect and Ellipse does nothing.
    MXMLG-222: setting the alpha of a rectangle changes z-order when there are 3 or more rectangles
    SDK-16754: Z-order incorrect when a Group is present
    QA: Yes - the test files from these bugs (or something equivalent) should be added to our standard test suite
    Reviewer: Deepa
    Ticket Links:
    http://bugs.adobe.com/jira/browse/MXMLG-219
    http://bugs.adobe.com/jira/browse/MXMLG-220
    http://bugs.adobe.com/jira/browse/MXMLG-222
    http://bugs.adobe.com/jira/browse/SDK-16754
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/Group.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/BitmapGraphic.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/GraphicElement .as

    This is the great thread ;-)
    My favorite threads are below.
    Munky posted great reply :8}
    SQL Query Help
    order in a connect by

  • I can't calibrate any color profile for my iMac's display!

    I think I accidentally deleted the color profile for my iMac's display
    and now it won't let me calibrate any profile! All the colors are bright and washed out.
    When I go to the display>color preference panel I get an error sound whenever I click ANY color profile, and it doesn't load. When I click "calibrate" it gives me the message: "Can not calibrate the display. The factory profile for the display could not be found."
    But I wasn't even using the factory profile, and it won't let me choose any other ones, either (though a whole list does show up!)
    I tried repairing/verifying the profiles in the ColorSync Utility, but it didn't help.
    Is there somewhere I can download the profile and install it? I'm running a white 20" Core Duo 2GHz iMac (summer of 2006), if that helps.
    Thanks!

    seenew,
    I'm wondering if you would have any luck with resetting the PRAM? PRAM settings hold some of the display preferences I believe.
    See: "Mac OS X: What's stored in PRAM"
    If not, I am wondering if reapplying the Combo update for 10.4.7 might correct the display calibration issue or at least return it to the default?
    I don't think that recreating the .plist file for displays will help.
    As far as I know you cannot "download" the profile.
    sorry if those suggestions don't help,
    littleshoulders

Maybe you are looking for