Thunderbird 24.4.0 has removed a feature I used - the ability to only show unread messages when viewing a mailbox. "quick filter" does that, but not persistentl
How can I set the view to only show unread messages persistently for a mailbox (e.g. junk)?
I used to be able to set it by folder. Removing the feature does not make the product better. I have no desire, for example, to see all the old spam, but I do want to see my old mail. I don't understand what the developers were thinking when they removed this capability.
Similar Messages
-
Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
My pc is working with windos 8.
Is there a solution?Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling -
Symptom:
When you view a report with SCCM, you may encounter the following error message:
An error has occurred during report processing.
Under the details box, you can see the detailed error information as below:
System.Web.Services.Protocols.SoapException: The report server has encountered a configuration error. Logon failed for the unattended
execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. Logon failed for the unattended execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException:
Log on failed. Ensure the user name and password are correct. ---> System.ComponentModel.Win32Exception: The user name or password is incorrect
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Figure 1 is the screenshot of the error message in SCCM:
Figure 1.
Cause:
According to the detailed error message, it indicates that “The report server has encountered a configuration error. Logon failed for the unattended execution account.”
and “The user name or password is incorrect”, so this issue would be caused by the mismatched credential stored in report server.
Solution:
To solve this issue, you can follow the steps below:
1.
Access Report Manager URL on your reporting server.
From figure 2, you can see that the URL for Report Manager is
http://SCCM:80/Reports
in our lab environment. You can check your Report Manager URL in Reporting Services Configuration Manager.
Figure 2.
2.
Find out the date source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} and access it.
Figure 3.
3. Test connection (Figure 4)
You can have a test connection to check whether the credentials stored in the report server are correct or not.
Figure 4.
4.
Modify the password or choose another authentication method
If you want to change the password, please make sure that password is the same as the one that you have set for that user account in the domain.
5. Confirm connection
After you change the password, you can test connection again. From figure 5, we can see that connection created successfully.
Figure 5.
After all the steps above, there is no error message when viewing the report. (Figure 6)
Figure 6.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
on the reporting web the system role and check the all settings give him full permissions
do i make my self clear ? (my English is not so bright )
now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
this poor gay have the same problem
An error has occurred during report processing. (rsProcessingAborted) -
I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number. We all have an iPad and all use the same apple ID as iPad the bill. How can I remove their numbers and add mine?
Add another e-mail account to your messages, so people could reach you on that e-mail from messages. As soon as you are online (if you have wifi only iPad) you are able to send and receive messages. i.e. your son can send you a messages from his iPhone addressing it to your (that additional) e-mail address.
-
My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?
I have ordered a 800 firewire to 800 firewire cable and am hoping to use the target mode option to copy files from the MBP.
Is this possible?
Hope so!
Any advice and or help would be greatly appreciated.
Many thanks,
NeilThanks Ogelthorpe.
Just bought an enclosure to try that also.
Hoping the MBP isn't really dead but just feigning death
Fingers crossed. -
What is the provisioning feature in the settings under, general>profile? It says something about "provisioning". What does that mean and what does it do?? (It's on my 5th generation iPod touch, black, iOS 6.1.3
A profile is used on iOS device to add specific settings and similar things to an iOS device. Tryically, they are added when the iOS devices is controlled by a company or school.
However, some apps install a profile. If your iPod is not controlled by a company or school then it seems an app added the profile. You can good the title if the profile and see if that gives any info. -
Hello I have an adobe CC id [removed] and I'am using the trial version, please send me a serial number for complete registration
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
I have the converter to change pdf to word. Works sometime, other time says conversion is taking too long. Can I get what it has translated so I can use the parts?
I would ask in the ExportPDF forum, Adobe ExportPDF (read only) (assuming that's the service to which you have subscribed). This is the Reader one.
-
Hi,
Using LabVIEW 2014 DS, and MSSQL 2008R2.
I have configured a table with identity, so the indexed will be incremented automatically.
I am trying to get the ID of the last Insert command that I am using.
I am trying to SELECT SCOPE_IDENTITY() but with no success.
I read about trying to so it with a procedure or transaction, but I just could not succeed myself.
Has anyone ever succeeded to use the scope_identity() from the LabVIEW DB toolkit ?
If yes, can you please elaborate more or even share the code ?
Thanks,
Amitai.Yes I have...let me dig out some code...
I do my INSERT query (with a semicolon at the end) and in the same query string do a "SELECT SCOPE_IDENTITY() as inserted_id;" - essentially what you're doing here is running two queries in one - one to insert your data and the second to retrieve the ID. From what I remember of when I did this (last year?), I think scope_identity() is valid for the same connection so as you're doing both queries in the same connection it should always be valid.
I then do this to get the ID (pardon the crappy VI snippet):
Essentially I execute the query and the result is a 2D array that contains one row/column which is your last inserted ID.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets -
How can I remove unread messages when I know I don't have any?
How can I remove "unread messages" when I know I do not have any?
Hit the num lock button again. Num lock forces only the numeric keypad underlying keys to work as a numeric keypad, and the rest of the keyboard won't work. Unfortunately Apple stopped including the numeric keypad hidden keyboard key labels on its keyboards. They used to include them. They are known as mouse keys: http://docs.info.apple.com/article.html?path=Mac/10.5/en/cdb_moskys.html
-
Is it possible that the home button can show a light when a message or a phone call has beebn missed?!
No.
There is no light there. -
My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.
Depends on how strong your wifi connection is.
you can try a reset hold down the home/sleep button together until you see the apple logo and then release. -
I am aware that the iPod Touch 5g has no official date yet, on the site it only says: Available to ship: October. But, does anyone know what a possible, date for the iPod to be released? :)
Well, I recently checked apple.com, and the "pre-order" button has been replaced with the "buy now" button. This is a very good sign that the iPods will begin to ship soon! There is still no exact date, but I expect that they will ship within the next 3 days. You should get an email when they have shipped.
Take care!
-59Ballons -
my iphone has calendar history for 10 years. my icloud only shows about 6-8 weeks back. how can i get icloud to show all the calendar events in the past that are on iphone?
I encountered a similar problem when finally (and with much regret) I was obliged to migrate my MobileMe to iCloud last month.
Many years of iCal history vanished without trace during this automated transition by Apple and iCloud then kindly synched the resulting vacuum back to iCal on my Mac.
Fortunately, iCloud wasn’t able to decimate iCal on my other Macs because (1) they are still running Snow and (2) I had switched them off as a precaution. Good job I did.
My solution was to export my iCal data on one of those other Macs to a backup file – then I imported that backup file into my Lion-updated Mac’s iCal. That restored all the iCloud-deleted iCal data back on to my Mac and this was promptly synched automatically to my Calendar on iCloud. So now it’s all there and showing.
Perhaps you could do something similar? In the meantime, be very careful not to let iCloud’s amnesia get synched to your iPhone (and other devices).
Experience has taught me never to trust an “upgrade” until it is proven to be working correctly and always to keep in reserve another Mac with a properly-functioning system and all synching to it switched off... -
Made big mistake of downloading Mavericks today.
Been struggling with all the FUBARd messes it caused, ALL DAY.
Google basic buttons don't work--can't log out or other basic functions.
Website use is impaired.
It took almost 3 hours to do a basic online order on one of them--at this rate, I'll be out of business soon, and it's seriously impairing Christmas preparations!
Google Voice/Video are screwed up, had to RE-download their voice/video plugin all over again--again.
Voice/video quality is REALLY poor.
Lag times in so many things are bad.
Thought this would download WITH the better writing/bookkeeping programs--NOT!
Mac Maps is piddle compaired with GoogleMaps.
The Email program on the desktop is REALLY hard to use, has few useful functions. It's MAYbe good if one only has ONE email; using it with severeal various email accounts is a serious liability in many ways--like filing, sorting, marking, etc.; no clear way to move email files to an external drive to save, to unload the HD.
HOW can Safari and Mavericks be fixed?
IF not, HOW can I REMOVE Mavericks and get back to Mountain Lion--which was not too great, but certainly more functional than Mavericks!
I NEED my web-based emails to work--NOW...NOT when Mac finally gets around to fixing things sometime later.
I NEED online ordering to work--NOW--not later when Mac finally gets around to fixing things.
PLEASE someone--any help out there? I couldn't even find but a rare hint that Safari 7.0 even exists--much less that anyone admits it's got problems, nor fixes for it.
What to do? Throw the whole unit out? Wipe and reboot? Dumb it back to OS 10? HOW? WHAT?
[freaking out here...]Zak Adelman, LexSchellings,
It's a shiney new computer. Came loaded with Mountain Lion.
Too busy learning to use the blessed thing, to download anything....except...
The only pluggin that had to be loaded, was Google Voice-Video pluggin, while Lion was still it's OS. [AND been using the Safari that came already in it.] Had to do that a couple times--nothing new there--that plug-in had to be re-loaded when using a PC, too--THAT happened even before Google slammed everyone into coerced use of it's Google+.
[I understood from others, that Firefox won't work in Mac units--or I woulda put that in it to see if that solved anything]
This unit seemed a bit sluggish from the git-go, out-of-the-box.
I figured that was probly the local DSL here---rural DSL is...um...our DSL's not something to brag about, but it's the best we can do...
The difference between speed of loading pages, etc. on the new Mac, was --not-- toooo terribly different--though yes, slower on Mac....and chalked it up to my inexperience with Mac.
Been trying to get things up and running for a bit over a month now.
NOT doing very well at it--just barely getting by; rapidly falling behind what needs done [work].
Google worked just --OK-- when OS was Lion, as did the Google voice/video--slower, and voice-video was kinda scratchy or glitchy, but worked enough to --get by--.
Loading Mavericks, ruined that.
VOIP calls via Google talk have bad echio, static, cut-outs; video calling was pixilated or not working; WAS cued to re-load it's Voice-Video plug-in....which seemed to help a bit, though not very well; it only helped the Voice-Video some, not all--figured that was probably Google issues, less than Mac's, since Google has been increasingly dysfunctional as they have twisted it to be a social media-dominant thing.
[[now seeking an email venue that does what Gmail was good at, including the Voice-video calling, that has no intention of turning itself inside out to be "social"]]
Can't sign out of Gmail or Google+, nor use buttons in upper right corner with the drop-down menu.
NO buttons in upper right corner cluster on Gmail work, except the name+ button to toggle over to Google+---which I don't need! [yeah--THAT's a Google problem!]
Can only switch to HTML version by catching that button as the account signs in--if one fails to be fast enough with their fingers, it goes to Google+; can't get to email unless type in mail.google.com.
Managed to catch that button today, and clicked to use HTML "permanently" until these issues get solved.
ALSO:
Have fairly new [about 1 year?] HP bluetooth printer-scanner.
BUT, after Mavericks loaded: it HAS the unit listed, HAS drivers for it, HP unit IS listed as default printer, everything --seems-- "go",
.....except Mac keeps posting it's out of ink, and/or, not hooked up, and/or not turned on--even when it is on.
It's SUPPOSED to be blue-toothing that printer/scanner.
It did it for Lion, before loading Mavericks, even though it was troublesome to get it to work, it at least HAD printed one document when Lion was the OS.
Thank you...Downloaded EtreCheck:
BTW: Trying to copy/paste data from that check list, to this post, was achaic:
had to use Edit, select all, then use edit again to get it pasted--the mouse buttons weren't allowed to copy-paste using right-click functions [is this a relic limited-function "thing" with Mac?, or is it because I wanted to keep using this new wirless, non-Mac mouse?].
Advice?
See below...
Hardware Information: Mac mini (Late 2012) Mac mini - model: Macmini6,1
1 2.5 GHz Intel Core i5 CPU: 2 cores; 8 GB RAM
Additional:
Monitor used = Visio flat screen. [not Mac]
Keyboard = Logitech solar wireless [not Mac]
Mouse = Logitech wireless
Video Information: Intel HD Graphics 4000 - VRAM: 1024 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
OS X 10.9 (13A603) - Uptime: 2 days 19:33:25
Disk Information:
APPLE HDD ST500LM012 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (456.94 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
MediaTek Inc MT1806
Logitech Logitech USB Headset
Logitech USB Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.google.keystone.daemon.plist
Launch Agents:
[loaded] com.google.keystone.agent.plist
[loaded] com.hp.devicemonitor.plist
[loaded] com.hp.messagecenter.launcher.plist
User Launch Agents:
User Login Items:
iTunesHelper
SpeechSynthesisServer
3rd Party Preference Panes:
Flash Player
Internet Plug-ins::
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 11.9.900.170 - SDK 10.6
Default Browser: Version: 537 - SDK 10.9
o1dbrowserplugin: Version: 4.9.1.16010
====== npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 ===[this was in red]=====
googletalkbrowserplugin: Version: 4.9.1.16010
Bad Fonts:
None
Old applications:
HP Device Monitor: Version: 2.7.0 - SDK 10.5
/Library/Printers/hp/hpio/HP Device Monitor.app
Time Machine:
=== Time Machine not configured! ===[this was in red]===
Top Processes by CPU:
6% WindowServer
4% Safari
4% SafariDAVClient
2% EtreCheck
0% com.apple.iCloudHelper
Top Processes by Memory:
303 MB Mail
270 MB Safari ======[this is version 7.0 ]======
262 MB mds_stores
147 MB softwareupdated
147 MB com.apple.IconServicesAgent
Virtual Memory Statistics:
1.77 GB Free RAM
2.85 GB Active RAM
2.36 GB Inactive RAM
1017 MB Wired RAM
4.64 GB Page-ins
111 MB Page-outs
Maybe you are looking for
-
Process: Safari [2867] Path: /Applications/Safari.app/Contents/MacOS/Safari Identifier: com.apple.Safari Version: 5.1.7 (7534.57.4) Build Info: WebBrowser-7534057004000000~7 Code Type: X86-64 (Native) Parent Process: launchd [123]
-
Multiple Instances of NetWeaver in a single installation (binary)
Hi, My product has several versions. In WebLogic I have one installation and have created multiple instances each for each of the version. Can I do the same thing in NetWeaver? I am looking to see if I can create multiple instances of NetWeaver wi
-
IDOC extraction from R/3 to BW
Hi Gurus, Can you explain how to start extraction of IDocs when request number is given? I can see the request numbers in WE02. But I dont know how to extract the same. Please help Thanks in advance..
-
Syncing to a new itunes library after reloading it
My computer crashed recently and I had to reload everything including itunes, now my iphone wants to erase its content to sync with the new itunes library (which is empty), is there any way to download the current content of my iphone to the new itun
-
Can I auto login in to the iTunes store?
I launch iTunes manually when needed and when I open it it askes me to log in to the iTunes Store. My user name is there and I have to enter my password. Anyway to have the password there also so I don't have to enter it every time? Is there a Save P