Thunderbird email client times out making IMAP and POP3 connections to gmail and hotmail.

After autoconfiguring several gmail accounts with Thunderbird, and then using them, they stopped working after I switched to Verizon High Speed DSL.  All of the accounts time out while trying to get email.   Non list an error.  While trying to auto configure a hotmail account, it failed during password loggin.
Disabled Windows Firewall
Disabled Norton Firewall
Disabled modem-router firewall
checked IMAP settings in Thunderbird.
deleted and then reautoconfigured the accounts to reset the passwords.
enabled IMAP manually in gmail and POP3
checked SMTP ports and IMAP default port numbers
checked for normal password
checked for SSL/TSL text
Checked with Verizon support who said that they don't help Thunderbird clients.
Tried logging in manually to all of the accounts to make sure the passwords and usernames were correct ...works.
help! "connection to server timed out"

Not exactly the same, but I am pretty sure the fix will be the same. 
give it a whirl and let us know.
Solution for sending MS Outlook and SMTP e-mail through Verizon FIOS for GoDaddy e-mail
The FIX...I had to log onto the xxxxxxxx(at)verizon.net e-mail account via the WEBMAIL version for Verizon.
I then went to Options-->More Options on the top, right menu.
Go to the Accounts menu on the left.
Click Add Account button toward the top.
I only entered information for Sending Mail.
     Account name (any name you like...I called it GoDaddy)
     From Name = my display name
     e-mail address = my GoDaddy e-mail address
     I then moved my cursor to the username field in the Receiving Mail just so my cursor wasn't in the e-mail address field anymore.
Verizon couldn't even help me with this.  This should be a standard check for them whenever they receive a call for SMTP issues.  I think they are trying to get everyone to use their (at)verizon.net e-mail account as their primary account.  This will help them retain or gain future business.  I think it's bad for business overall.
==========
Note the "Test Account Settings..." button failed on the test send of a message, but all other tests passed fine.  My messages are sent fine even with this part of the tests failing.
The above is true for a lot of third party email providers (not programs but email providers) 

Similar Messages

  • HT4634 Why does my connection to email server time out on default port?

    Why does my connection to email server time out on default port?

    Hi there,
    There may be a conflict between the network settings and your devices. I would recommend taking a look at the article below and comparing that to your routers current settings.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/ht4199
    -Griff W.

  • Can you change the legth of time (or number of rings) it takes for on iphone 4 to time out making an outgonig call?

    Can you change the legth of time (or number of rings) it takes for on iphone 4 to time out making an outgonig call?
    Mostly it's to call in for radio contests. The Iphone is really good at making a quick call, but it seems to timeout after 15-20 rings. I realise this is a small thing, but free tickets is free tickets.
    Most commenst I see is abotu incoling calls, not outging.
    Thanks.

    No. You can't do this with any phone.

  • When I try to fill out forms on line my I cannot send as it says my email isn't valid. I ve tried with my gmail and my work email and no luck. It will recognise my partners email with no problem. Please advise

    When I try to fill out forms on line my I cannot send as it says my email isn't valid. I ve tried with my gmail and my work email and no luck. It will recognise my partners email with no problem. Please advise

    Assuming that you can send email on the iPad, Maybe something is corrupt in Safari that is causing this. Try clearing Safari and see if the sites will accept your email address.
    Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • I try to upgrade my ios to 4.3.1 the downloading times out even on an adsl connection. can anyone guide?

    i try to upgrade my ios to 4.3.1 the downloading times out even on an adsl connection. can anyone guide?

    Before beginning the download, temporarily disable your antivirus, anti-adware, anti-spyware, and any other anti-whatever that is required with that swiss cheese for security OS your computer is running.

  • Is there any time out in a Data Federation connection?

    Hi,
    I have a multi source universe on SQL Server and BW, the query against SQL Server times out exactly after 10 mins, the time out setting in the universe connection and database have been bumped to 30 min but my query still times out after 10 mins, I looked into to connector configuration under DataFederation connection but there is no timeout setting for a sql server connection.
    Any thoughts why my query is timing out?
    Thanks
    Ram

    I got this issue fixed by changing the query time out setting to FALSE in the sql server sbo file. I am sill not sure where where can we change the time out limit from 10 mins to higher number.
    location of the file: SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\oledb

  • I am having Macbook Pro, I have recently tried updating my operating system to OS Yosemite, but after that its giving problem in connecting to Wifi. The error is "Connection Time out Occurred". Its getting connected by Ethernet cable.

    I am having Macbook Pro, I have recently tried updating my operating system to OS Yosemite, but after that its giving problem in connecting to Wifi. The error is "Connection Time out Occurred". Its getting connected by Ethernet cable.

    Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
    Step 1
    Turn Wi-Fi off and back on.
    Step 2
    Restart the router and the computer. Many problems are solved that way.
    Step 3
    Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
    Step 4
    Run the Network Diagnostics assistant.
    Step 5
    In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
    Step 6
    Back up all data before proceeding.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
    Step 7
    You may need to change other settings on the router. See the guidelines linked below:
    Recommended settings for Wi-Fi routers and access points
    Potential sources of interference
    Step 8
    Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    Step 9
    Reset the System Management Controller (SMC).

  • My ipod touch is shpwing the "connect to itunes" screen.. and on connecting to itunes and clicking on "restore" it shows error 3014.. what do i do?

    my ipod touch is showing the "connect to itunes" screen.. and on connecting to itunes and clicking on "restore" it shows error 3014.. what do i do?

    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.

  • "Register with ESB" failing, though AS and IS connections are tested and OK

    When trying to deploy my ESB project, in the "Register with ESB" phase I am now all of a sudden getting the following Error (the same project was working fine for months unchanged until today). This is even though the AS and IS connections are tested and still working fine.
    Things that changed today:
    1.Change 1 – when starting JDEV I was prompted to download some Jdev patch/upgrade for some sort of new BPEL modeling framework, so I installed, JDEV asked to reboot so did, JDEV asked to upgrade JDEV from former, so did, JDEV asked for what dir, so went with default .../jdev/system
    2. Change 2: tried also to deploy the standard “Order booking SOA demo” after patching.
    3. The Error message I started getting, both for new and old deployments (that were working fine until today), is below, as is my version information:
    Entity Deployment Failed
    error code: 1000 : 5
    summary: -
    Fix: Contact Oracle Support
    Version:
    ADF Business Components     10.1.3.39.78
    BPEL Designer     10.1.3.1.0 (Build 061009.0802)
    CVS Version     Internal to Oracle JDeveloper (client-only)
    Java™ Platform     1.5.0_06
    Oracle IDE     10.1.3.39.78
    Struts Modeler Version     10.1.3.39.78
    UML Modelers Version     10.1.3.39.78
    Versioning Support     10.1.3.39.78
    Ideas why the "Register with ESB" stopped working even though the AS and IS connections are tested and still working fine?

    maybe this link can help you
    "error code: 0 : 10" when Deploying ESB Project

  • Can't connect to Yahoo! calendar.When trying to connect Mail, Contacts, Messages and Notes connect but Calendar and Reminders don't connect. I get error  A secure connection couldn't be established.

    Can't connect to Yahoo! calendar.
    When trying to connect Mail, Contacts, Messages and Notes connect but Calendar and Reminders don't connect.
    I get error  A secure connection couldn’t be established.
    I think a lot of people are getting this. Some solutions with Gmail but v little with Yahoo!
    Any answers?
    drlounger.
    Yosemite
    Retina macbook pro 2012

    Dear Al
    Thanks for your reply.
    I have just found out what's wrong. I went to the 'more info' section of my Chitchat application and it took me to a link where it explained that Yahoo Chat has ditched chatting with the Java protocol and chatters can now only chat via the Yahoo Messenger protocol, which is Yahoo Instant Messenger with Voice. Unfortunately Yahoo doesn't provide a platform for Yahoo Voice for Macintosh computers. Though the original link I went to provides another link to a thing called 'Adium' from which a Mac can access Yahoo Chat's new protocol, although it's not fully developed yet.
    Oh...and thanks so much for letting me know about the Java update release. I did not know that I have to upgrade my system first to recieve the latest update information.
    Regards
    Tina

  • My iphone 4 says activation required and then connect to itunes and when i try to connect it wont what do i do (i cant use it at all) :'(

    my iphone 4 says activation required and then connect to itunes and when i try to connect it wont what do i do (i cant use it at all) :'(

    i got it from O2... and it dosent do anything when i plug it into my laptop it dosent come up at all or connect to itunes

  • Unable to connect to gmail and other google services

    when i'm connecting to gmail and other google services like google calender it is saying that ,
    The page isn't redirecting properly.Firefox has detected that the server is redirecting the request for this address in a way that will never complete.This problem can sometimes be caused by disabling or refusing to accept cookies. Any help on this would be appreciated

    Thanks a lot for the link.It worked.

  • Where is   sign when you call international number, but first you call local number and after connect open keyboard and see that sign   doesn't exist only 0

    Where is   sign when you call international number, but first you call local number and after connect open keyboard and see that sign   doesn't exist only 0

    No that is not work. Try to call some number and when is connect click on keyboard and you can see that sign "+" doesn't exist.
    So I use local number, when I'm connect I have option to call international number but like "+3193675xxxx" how I can put?
    Before on iOS 6 I do it.

  • I am locked out of IMAP for want of a password and I don't know what password is required.

    I had an unauthorized attempt to login to my Gmail account which was blocked. Gmail wanted me to change my Google password, which I did. Gmail now works fine, but Thunderbird now asks for:
    "Enter your password for -- [email protected]@imap.gmail.com:" to which I have
    1. Put in the new password several times and gets rejected each time, and
    2. I deleted the old password, as well as the new password, that Thunderbird recorded, several times (The only way to change a password saved by the password manager is to delete it, get prompted for the new password the next time it needs it, and then tell it again to save that password. You can delete the password using Tools -> Options -> Privacy -> Passwords -> View Saved Passwords by selecting the password and then pressing the Remove button). I have been prompted for the new
    password.
    I keep getting the generated tiny reply at the bottom right of my screen" Thunderbird Alert from account [email protected]: Application specific password required: http://support.google.com/accounts/bin/answer=185833 (Failure).
    This question is similar to the gentleman having problems in the Uk/Carribean, but Gmail did not generate me a new password, I did.
    Any new suggestions welcome!

    ''""Enter your password for -- [email protected]@imap.gmail.com:"" ''
    on imap & smtp servers:: Change user name from [email protected] to pvedxxxxx
    Try another client. Perhaps [http://www.seamonkey-project.org SeaMonkey] (requires manual configuration of accounts).
    Since this is IMAP your messages are stored on the server, so the following should not cause you to loose any e-mails. Try the following as a last resort.
    Delete the account from Thunderbird and then add it; starting over from scratch.

  • P & L Report using Report Painter does not run in PRD client ( time out)

    Hi SAP Gurus
    We created a P & L Statement on the basis of GLPCT table. We incorporated Accounts groups from a financial statemen version using KE5B in profit center accounting.
    Report contains Account groups as well as profit centre group.
    It takes around 5- 10 minutes to run in DEV client but in PRD it takes a lot of time and times out after a while.
    Any suggestions....??
    Regards
    Satish

    Hi Satish,
    Use all the Index fields(Profit-center-based index) which are active for the table GLPCT in the Selection screen of the report and use maximum selection criteria.The processing time will improve to some extent.
    ~Andrew
    Good you got the solution from the Basis Team, probably they might have increased the processing time limit of the report.But to increase the efficiency of the program the above will work.
    Edited by: Andrew J on Jan 24, 2011 4:53 PM
    One more tip for tuning the performance

Maybe you are looking for