Thunderbird issues with Leopard

I'm using a Thunderbird 2.0.0.9 IMAP account with Leopard, but cannot access attachments larger than about 200K. When I try to do so, the opening or saving stops midway through, and then Thunderbird becomes inoperable, forcing me to restart the app.
Apple Mail works okay, but I'd rather not move everything to it if I can help it. BTW, POP 3 accounts don't work for me with either with Thunderbird or Apple Mail, but appear to work for those running Tiger in our office.
Anyone else experiencing similar issues, especially with Thunderbird IMAP and Leopard? Any ideas on how to address this?
Thanks!

For me also, Thunderbird just won't send mail, using Leopard. Asks for password twice despite using manager, and then advises unable to connect.
Had the same problem with MNail, however a Repair Permissions whilst booted from the install disk fixed Mail, not Thunderbird drat.

Similar Messages

Graphic Issues with Leopard - iMac 24" White GeForce 7300 GT

Upon installing Leopard, I've noticed several graphics issues and general lag and delayed response with the interface. I'm running a 24" iMac 2.16ghz White early 2007, 3gb of RAM, with the GeForce 7300GT card. I have Time Machine disabled, and Spotlight has fully indexed.
When installing Leopard, I did an "Erase and Install" and have manually installed my Applications after the Leopard install. I'm using only a few applications that are all "Leopard ready" and have a relatively clean system at this point. I have also cleaned the PRAM, per the recommendations in some of the threads ive read, which didn't seem to correct the issue in this case.
It seems that any time I run any type of video or graphical application, such as Photo Booth, World of Warcraft, iChat, etc, I get a large amount of lag and slow response with the interface. Windows respond very slowly, and the applications freeze for 15-20 seconds. Even when not engaging any applications, opening folders in the finder as well as the dock appear to stall and respond very slowly.
Aside from these issues, Leopard has performed very well and I have had no other issues. Quicklook and coverflow all seem to respond very quickly and smoothly. My guess is that it may be driver related as it seems to be centered around items that are engaging the video card, though it is strange how some graphical effects seem to work smoothly while others are rather choppy. I have been watching the Activity Monitor and there don't appear to be any processes that are sucking up CPU, and nothing obvious that may be reducing performance.
I'm just curious if anyone else has noticed anything similar to this on similar hardware, or possibly may know what the culprit could be. My best guess, again, is that it could be the drivers or firmware with this specific hardware that I'm using.
Thanks for your time

I've had the same graphics issues with my white iMac 24 (serial no starts W8638), but with the GeForce 7600 card. AppleCare got me to do all the usual stuff (reset PRAM, clean Leopard install etc) but problems continued. The usual pattern is that after a while horizontal lines appear (usually in Safari) and things deteriorate form then on until there is so much pixellation that I have to turn off and back on.
Yesterday I ran for several hours using SMCFanControl to set the fans to max and had no problems, so my suspicion is that the additional graphics requirements of Leopard are over-heating the graphics card or logic board.
The Apple engineer took the machine away today and said they'll probably replace the logic board and graphics card (I think they can't change one without the other in the iMac?).
Will be a few days but I'll report back on what repairs they make and whether they solve the problem. My fear is that any changes they make will have no effect if its a design problem and the card is just not up to the job without over-heating. Though it could be the card just needs a good clean
Has anyone else tried increasing fan speed?

Colour Management issue With Leopard and PS CS3

Hi Everyone,
Since I have installed Leopard I am having colour management issues with Photoshop CS3 and my Canon i9950 printer.
My screen is calibrated with a Spyder and I used to ask Photoshop (in 10.4.11) to manage colour when printing and used the Spyder profile. Everything came out as I saw it on screen.
Now in leopard when I do the same thing everything comes out too yellow on the print. If I ask Photoshop to let the printer manage the colour it is too red. If I use the default colour management (photoshop managing the colour and it choosing the colour space it is better, but still too yellow).
Photoshop gives the hint to turn off colour management in the printer but there is no option for this and it also said the same thing before of course (when it worked in 10.4.11).
Any ideas?
Thanks.

You need to use the correct printer profile for the paper you're using. If the printer didn't come with any pre-built profiles, check Canon's web site to see if they have any profiles available for your printer that you can download.
Printer profiles are very specific. You can't take take a profile for glossy Epson paper and expect it to work very well for Canon glossy paper.

Colour Management Issues with Leopard and Photoshop CS3

Hi Everyone,
Since I have installed Leopard I am having colour management issues with Photoshop CS3 and my Canon i9950 printer.
My screen is calibrated with a Spyder and I used to ask Photoshop (in 10.4.11) to manage colour when printing and used the Spyder profile. Everything came out as I saw it on screen.
Now in leopard when I do the same thing everything comes out too yellow on the print. If I ask Photoshop to let the printer manage the colour it is too red. If I use the default colour management (photoshop managing the colour and it choosing the colour space it is better, but still too yellow).
Photoshop gives the hint to turn off colour management in the printer but there is no option for this and it also said the same thing before of course (when it worked in 10.4.11).
Any ideas?
Thanks.

I'm having exactly the same problem, only my printer is a Canon Pixma iX4000. The colour is all bleached out, it looks exactly like when you've accidentally printed an RGB file on a CMYK printer, and at first I thought that was what I had done, but it isn't. This is very frustrating, I've spent all day going through the manuals, recalibrating etc, but no luck. This is a brand new Mac Pro and printer, but if its not going to print what I see on screen it's just expensive junk.
I wasn't sure if the problem was Leopard or the printer or CS3...

Big issues with Leopard and writing to NAS units or Windows servers

Quick run down of the issues
1st client has a number of G5's all running 10.5.2
NAS units running embedded Windows SBS 2003 or Windows Storage .
All shares have worked fine before the macs were upgraded to Leopard.
Now the macs can see the shares, mount and write to the folders. But immediately afterwards all inherited permissions are stripped from the folders/files and only the owner of the file/folder can access them. All other mac users have no access. It seems that Leopard is ignoring the inherited permissions of the share and just applying its own.
2nd Client
Number of imacs running 10.5.2. Can see the mac shares on the server running Windows SBS 2003 fine. The minute any files are copied you get the progress of the items being copied, seems to appear on the server and then just hangs.
In most circumstances the copying crashes the whole server.
Have tried binding the imacs to AD, but no joy. SMB sharing (with Appletalk turned off) dosent help either.
Somewhere there seems to be some gremlins with AFP and windows shares
Anyone have similar issues or bright ideas ?

Alright I'm running into the same issue with my iMac 10.5.2 connecting to windows server 2003 r2. I'm about to go nuts, I can log on to the server, open files manipulate them and sometimes I'm able to save that file back to server but I'm unable to transfer almost anything new to the server, (I can create new folders though). When you try to transfer something to the server I get "progress of the items being copied, seems to appear on the server"... then it hangs, a corrupt file is left on the server. If you try and open that file I get an error message on my mac, "OS X is currently using this file" on a pc it will say the file is corrupt. I'm forced to carry my psd files on a flash drive and walk to coworkers machines to upload it to the server... (haven't had time to set up parallels). I'm the only mac in the office and I'm seeing why I've been so spoiled at past jobs where its 100% macs.

HELP: Mail issues with Leopard

I have been having an issue with Mail since I upgraded to Leopard. I am getting the following message when I wake my Mac from sleep:
There may be a problem with the mail server or network. Check the settings for account “[email protected]” or try again. The server error encountered was: The server “mail.mac.com” cannot be contacted on port 143.
Does anyone know why this might be happening? Mail seems to work fine otherwise...

I had update problems with my PowerBook G4 as well. In my case the update stalled at Writing Package Receipt-it was installing 4 packages so I am not sure which one failed-but about this Mac showed 10.5.2 version-however the receipts were not anywhere -either in Software Updates/Installed Updates or in Library/Receipts/boms or in Console Logs-therefore, I concluded that the Update was only partial. I was unable to update it to completion using the independently downloaded Combo updates. So........., I restarted with the install DVD and did an Archive and Install (it reverted back to 10.5), then ran Software Update. It installed 7 items some of them relating to iTunes, iWork, iLife, QuickTime etc, including the combo 10.5.2 updater. It took an hour or two but everything finally installed. After that I ran Software Update again and it installed the Graphic Update. Now everything is fine except Permissions Verify/Repair takes quite long.

G5 fan issues with Leopard

I've had my G5 for many years, and despite the many complaints by others about unusual fan activity, I've not had one issue until I installed Leopard. Now, for the first time, the fan is changing speed frequently (every few minutes). It is not like a jet taking off, but it gasps every once in a while. Is this an improvement with Leopard, something I can adjust, or is there a problem with Leopard?
jmf

Hi Jack
Have you tried [resetting the SMU|http://support.apple.com/kb/HT1436]?
Not sure if resetting the PRAM/NVRAM is relevant. I have seen posts that that can help when the fans are problematic but from what I've read at Apple Support there seems to be little stored in there which controls the fans (for instance [here|http://support.apple.com/kb/HT1379?viewlocale=en_US] and [here|http://support.apple.com/kb/HT1242]). But I guess it never hurts to try.
You can also try one of several fan control utilities out there, such as [smcFanControl2|http://homepage.mac.com/holtmann/eidac/software/smcfancontrol2/ index.html].
/p

Disk Utilities/Permissions Issues with Leopard

What is wrong with Leopard's permissions? I have had numerous permissions issues, and had to reformat my two disk drives and Archive & Install Leopard on my startup disk after a Tiger to Leopard Upgrade.
Now when I run Disk Utilities and Repair Permissions (which I do routinely), what used to take a minute or two in Tiger now takes a half hour (or longer) in Leopard?
I ran Disk Utilities on my MacPro and it has taken nearly 25 minutes and is still going. My MacBook Pro is estimating the time at 1-minute remaining (where it started), and it has also been going for 25 minutes plus. I would like to go to bed, and don't want to leave my MBP running over night if I don't have to.
This is a major issue and one which Apple needs to address immediately. I trust I am not the only User having this issue, is this the case?

No your not the only one. It's been reported throughout the discussions. Appears that some of the errors reported in disk utility will not effect performance. Still, I expect that something is being observed and worked on as an update..

My visit to the Genius Bar regarding video issues with Leopard

Having video hang up issues with imove 08 and viewing videos on my webgallery. We opened a video on my web gallery on 3 computers with Leopard and two computers with Tiger at the Genius Bar. The Tiger machines allowed immediate playback where the Leopards took 3-5 minutes to view. Crazy!
Also noticing fickering with my footage in imovie 08 which I never had with Tiger. Plus when I delete a clip in my project, my workspace goes completely black and I must go into another project open it, then back to the first project and it reappears....Very frustrating.

DVD Drive is dead. Hopefully was the issue.
Thanks for all the input

3rd party app Installation issues with Leopard

I recently purchased a new MacBook Pro with Leopard installed. I have been trying to install (from original media) a number of applications (such as Office:mac 2004) that install and run well on my old G4 running Tiger. On Leopard the installer won't even open the package. I have checked permissions, am in an admin account, etc but nothing seems out of place. I also recognize that these installation packages are pre-Leopard but I can't imagine all my software is now obsolete. Anyone have any suggestions?
Thanks,
Doug

Yes I have checked selected applications that I am having issues with. Office:mac 2004 is being used by others on Leopard and Intel based platforms. Not sure if 100% of these users migrated the installation from a prior machine or were upgrading the OS so already had it installed but that is highly unlikely. A demo copy of this even came with my machine. Per advice from other discussion groups this was completely removed prior to trying to install my bought copy of the software. I had believed that Rosetta would allow most (all) apps that ran on a PowerPC under Tiger to work. Since I can't get the installer to even run, I can't tell if the app itself will work.
BTW, I am about to go back and reinstall Leopard to see if that solves the problem.

Re: Graphic Issues with Leopard - iMac 24" White GeForce 7300 GT

I noticed the same issue. It's especially noticeable in Photo Booth. The video and sound don't sync up.

I've had the same graphics issues with my white iMac 24 (serial no starts W8638), but with the GeForce 7600 card. AppleCare got me to do all the usual stuff (reset PRAM, clean Leopard install etc) but problems continued. The usual pattern is that after a while horizontal lines appear (usually in Safari) and things deteriorate form then on until there is so much pixellation that I have to turn off and back on.
Yesterday I ran for several hours using SMCFanControl to set the fans to max and had no problems, so my suspicion is that the additional graphics requirements of Leopard are over-heating the graphics card or logic board.
The Apple engineer took the machine away today and said they'll probably replace the logic board and graphics card (I think they can't change one without the other in the iMac?).
Will be a few days but I'll report back on what repairs they make and whether they solve the problem. My fear is that any changes they make will have no effect if its a design problem and the card is just not up to the job without over-heating. Though it could be the card just needs a good clean
Has anyone else tried increasing fan speed?

Network issues with Leopard fresh install

I have an iBook that I was running Leopard on with no issues yesterday. It is no longer my main computer, so I wanted to wipe everything and start from scratch with a fresh install of Leopard. The install went smoothly. I did an Erase & Install setup from a Leopard Upgrade disc (but already had Leopard on my system so upgrade verified OK). When I booted up for the first time, it appeared everything was working normally.
I went online, downloaded a couple pieces of software I frequently use, and then started to set things up. This is when I ran into issues. I could browse the web without a problem. I could set up email with POP access, but not IMAP. AIM with Adium connects just fine. Tweetie won't connect. Dropbox won't connect. It's like some ports are being blocked, but others aren't, and I can't figure out why.
I have tried/verified:
OSX firewall is off
Restarted router/cable several times
iBook is in router's DMZ- outside of router firewall
Repaired permissions
Reset PRAM
Anyone have any suggestions or other troubleshooting ideas?

Here are the steps to selling*:
http://www.macmaps.com/selling.html
Mac Pros that shipped with Leopard should install from the Mac Pro labelled discs. Those that came with pre-Leopard, you should still include the Mac Pro discs, though if you desire to install Leopard on them, you should also include the Leopard discs that are retail. Leopard retail looks like * and do not say Upgrade, DropIn, or OEM.
- * Links to my pages may give me compensation.

Firewire issues with Leopard

I updated to Leopard few days ago on my G5 Dual 2Ghz
FW Card is http://www.sonnettech.fr/product/tango_2.html
- First problem was : tasks UserEventAgent and CoreAudio turned to red into activity monitor
- I sampled the tasks (Actity monitor/Inspect) and here are the loops :
UserEventAgent sample ---------------------
Sampling process 1092 for 3 seconds with 1 millisecond of run time between samples
Sampling completed, processing symbols...
Analysis of sampling UserEventAgent (pid 1092) every 1 millisecond
Call graph:
2286 Thread_2503
2286 0xffc
2286 0x25ec
2286 0x385c
2286 CFRunLoopRun
2286 CFRunLoopRunSpecific
2286 mach_msg
2286 machmsgtrap
2286 machmsgtrap
2286 Thread_2603
2286 pthreadstart
2286 AVS::DestroyAVCDeviceController(AVS::AVCDeviceController*)
2286 CFRunLoopRun
2286 CFRunLoopRunSpecific
2286 mach_msg
2286 machmsgtrap
2286 machmsgtrap
2286 Thread_2703
2286 pthreadstart
2286 CAPThread::Entry(CAPThread*)
2286 HALRunLoop::OwnThread(void*)
2286 CFRunLoopRunSpecific
2286 mach_msg
2286 machmsgtrap
2286 machmsgtrap
Total number in stack (recursive counted multiple, when >=5):
Sort by top of stack, same collapsed (when >= 5):
machmsgtrap 6858
Sample analysis of process 1092 written to file /dev/stdout
CoreAudio sample ------------------------
Sampling process 1094 for 3 seconds with 1 millisecond of run time between samples
Sampling completed, processing symbols...
Analysis of sampling coreaudiod (pid 1094) every 1 millisecond
Call graph:
2163 Thread_2503
2163 0xbfffff38
2163 0x2040
2163 0xcdf0
2163 CFRunLoopRunSpecific
2163 mach_msg
2163 machmsgtrap
2163 machmsgtrap
2163 Thread_2603
2163 pthreadstart
2163 AVS::DestroyAVCDeviceController(AVS::AVCDeviceController*)
2163 CFRunLoopRun
2163 CFRunLoopRunSpecific
2163 mach_msg
2163 machmsgtrap
2163 machmsgtrap
2163 Thread_2703
2163 pthreadstart
2163 CAPThread::Entry(CAPThread*)
2163 HALRunLoop::OwnThread(void*)
2163 CFRunLoopRunSpecific
2163 mach_msg
2163 machmsgtrap
2163 machmsgtrap
Total number in stack (recursive counted multiple, when >=5):
Sort by top of stack, same collapsed (when >= 5):
machmsgtrap 6489
Sample analysis of process 1094 written to file /dev/stdout
After some investigation it occured that
"2163 AVS::DestroyAVCDeviceController(AVS::AVCDeviceController*)"
leads to some other components :
AVC.plugin that is a core media IO service and IOFireWireAVC.kext that handles I/O for Firewire
So I ran the test : stop my external drives connected to the FW Sonnet card, and there it was ! no more task in red... I know many of my friends had same issues with same G5 (2, 2.2 ,2.7) and especially, using video apps like final cut with FW cameras and external drives. I suspect de dual kext to be a part of the problem here, because on other Macs, nothing happens like this.
Can I hope for some help or can we expect driver update to get started at work with Leopard soon ?
Thx for answers

Hi all
Since I've updated to Leopard, I've encountered the same problem - without Sonnet Card - using FW800 port with a hard disk and ADVC100 in a FW400 port.
Only UserEvenAgent freezes.
Sampling process 162 for 3 seconds with 1 millisecond of run time between samples
Sampling completed, processing symbols...
Analysis of sampling UserEventAgent (pid 162) every 1 millisecond
Call graph:
2255 Thread_2503
2255 0xbffffd40
2255 0x25ec
2255 0x385c
2255 CFRunLoopRun
2255 CFRunLoopRunSpecific
2255 mach_msg
2255 machmsgtrap
2255 machmsgtrap
2255 Thread_2603
2255 pthreadstart
2255 AVS::DestroyAVCDeviceController(AVS::AVCDeviceController*)
2255 CFRunLoopRun
2255 CFRunLoopRunSpecific
2255 mach_msg
2255 machmsgtrap
2255 machmsgtrap
2255 Thread_2703
2255 pthreadstart
2255 CAPThread::Entry(CAPThread*)
2255 HALRunLoop::OwnThread(void*)
2255 CFRunLoopRunSpecific
2255 mach_msg
2255 machmsgtrap
2255 machmsgtrap
Total number in stack (recursive counted multiple, when >=5):
Sort by top of stack, same collapsed (when >= 5):
machmsgtrap 6765
Sample analysis of process 162 written to file /dev/stdout
Perhaps an Apple update could be needed.
I'll try your solution - but loose the use of my 500Gb HD is difficult
Regards
Didier

Airdisk issues with Leopard.

With Tiger I had my AEBS connected to a USB disk and it worked just fine, no connection problems.
Now, with Leopard, Im running the exact same setup and I keep getting disconnected from the USB Disk.
When moving files between my MBP and the USB Disk I get a Server Connection Failure, and then it makes me Eject my USB Disk.
Any clues on how to remedy the situation?
I do a lot of sharing between my USB Disk and MBP, so any help is welcome!
Thanks in advance!

I am so glad I checked out what the problems were before I upgraded. I bought an AEBS because I thought this was going to be a great way to work in Leopard, It's the backbone of my home network backup system. I have been using the AirDisc with Apple Backup 3.1.1, and although it did take a whole weekend to make the first backup (road trip!), it has been working very well since, (only a problem with iDVD project files). I use it to backup 3 macs, and I was looking forward to Time Machine. I guess Apple will wait for my family pack purchase until this is cleared up. New features sound neat, but I can't throw out what works for what will not.

Multiple issues with Leopard (Network, Pages, iPhoto, iTunes, General)

It's been so much fun.
I have 3 macs right now, per my profile.
I started updating the G4 because it's the experimental system, the MacPro is production, and the MacBook is for the kids and for me to wander the domain and still be productive. These Macs and some other things sit behind a Linux/iptables firewall.
1st issue: After updating the G4 certain web sites have been inaccessible, including just about any apple sites behind SSL, ADC, iTunes Music Store, iPhoto Store (calendars, books), Network Solutions, Newegg, etc. However, as of 10.4.11 on the other 2 Macs, 10.5.1 and 10.4.11 had parity, or close to it, in networking.
2nd issue: The other problem I had right off the bat was remote printing to the MacPro which has an Epson Stylus Photo printer hooked up. At the time this was first noticed, the MacPro was 10.4.11 and the computer I was attempting to print from was 10.5.1. I erroneously thought that had to do with the disparity on OS versions. Not so. The result of trying to print anything to the remote printer is the immediate cratering of the app you're printing from, Safari, Pages, Firefox, Preview. I can reproduce this at will.
3rd issue: Straight from the previous 2 issues, I can't log any problem reports. This is frustrating.
I initially didn't see the problems that I saw a lot of people registering on here, other than the ones I noted above, and as far as the networking thing went, 10.4.11 and 10.5.1 were equally cr*y. So, I bit the bullet and upgraded several things, iLife '08 (which I couldn't adequately check out on the G4), iWork '08 which I hadn't had any problems with, and Leopard on the remain 2 macs.
Issue 1 was, as expected, no better or worse, and more and more talked about on these discussions. I thing that helped, notably to allow me to finally login to the discussions, rather than just read them, was:
sysctl -w net.inet.tcp.pathmtudiscovery=0
Thanks to mreckhof for that little gem
This helped with the login here, but didn't help with anything else. And in retrospect, 10.5.1 is much worse then 10.4.1 as far as the networking goes. When/if I expose the mac by putting it outside the firewall, it's actually much much worse than it used to be. There are several places where any of the Macs directly connected to the internet are completely useless for talking to websites, DNS, and other things. The web site problem is that more than a handful don't load. Most of these make heavy use of akamai, as apple does. The Linux Firewall and exposed Linux desktops don't have this problem.
Right now, I can't buy or use a few of the bought things from iTunes Music Store. I could not order calendars from iPhoto, which shot holes in several of our holiday gifts to friends and relatives. I can't purchase or update several things with other online vendors from the mac, where I would usually do such things. There is a veritable litany of things, real monetary that I also can't do to earn money as well now that we've upgraded, but I'll get to that.
Issue 2 and issue 3 were unchanged.
4th Issue: iPhoto lost, on import, several photos and movies. This happened just recently. Currently the iPhoto library has around 30,000 photos and videos in it spanning the last several years. it's around 500GB. The problem was that after the import was "done" and it was cleaning off the memory card, it crashed. The imported items were not successfully imported, that I can find, and the memory card was successfully cleaned off. The images and movies appear to be lost completely. The problem is that we derive some of our income from the picture. There backed up in 2 different ways, but we have to be able to trust that they'll arrive safely for the backup to work. I'm rethinking that. I can't trust I photo so memory cards are filling up.
But I thought we still could do things with iPhoto with what is there. Woe is me.
Issue 5: Using Pages 3.0.1, and dragging photos from iPhoto to it, something that has brought good success in the past, and produced some great results, stopped working reliably, in a big way.
The document in question is about 80 pages long and contains a couple hundred photos, dragged and dropped from iPhoto. On or around page 62, Pages started throwing up a "Image file ****.jpg is corrupt and cannot be used, all other photos already imported blah, blah, blah." I'm paraphrasing at the moment because 1) Pages crashes, when you're lucky, soon after this and 2) when you're not lucky, the whole computer freezes in a non-recoverable way. The system log is littered with:
2008/01/07 23:00:17 Pages[173] Pages(173,0xa0748f60) malloc: * mmap(size=3051520) failed (error code=12)
* error: can't allocate region
* set a breakpoint in mallocerrorbreak to debug
2008/01/07 23:00:16 Pages[173] CGContextSetShouldSmoothFonts: invalid context
2008/01/07 23:00:17 Pages[173] CGContextConcatCTM: invalid context
2008/01/07 23:00:17 Pages[173] CGContextConcatCTM: invalid context
2008/01/07 23:00:17 Pages[173] CGContextSetFlatness: invalid context
2008/01/07 23:00:17 Pages[173] CGContextRestoreGState: invalid context
2008/01/07 23:00:17 Pages[173] CGContextScaleCTM: invalid context
2008/01/07 23:00:17 Pages[173] CGContextClearRect: invalid context
2008/01/07 23:00:17 Pages[173] CGContextSetLineCap: invalid context
2008/01/07 23:00:17 Pages[173] CGContextAddLineToPoint: invalid context
2008/01/07 23:00:17 Pages[173] CGBitmapContextInfoCreate: unable to allocate 3047424 bytes for bitmap data
2008/01/07 23:00:17 Pages[173] CGContextTranslateCTM: invalid context
2008/01/07 23:00:17 Pages[173] CGContextSaveGState: invalid context
2008/01/07 23:00:17 Pages[173] CGContextSetFlatness: invalid context
2008/01/07 23:00:17 Pages[173] CGContextRestoreGState: invalid context
2008/01/07 23:00:17 Pages[173] CGContextScaleCTM: invalid context
2008/01/07 23:00:17 Pages[173] CGContextClearRect: invalid context
There were around 100 instance of the above error in at the same timestamp.
I'm not sure where it's trying to malloc this from, but the machine has 8GB of physical ram and plenty of space for swap. It normally reports 34GB of VM and when pages is started, 6+GB of real ram is available to it.
And the image isn't corrupt. I'm able to start a fresh document up and put a few pictures into it.
I am unable to cut and paste, use the media browser or otherwise to add more than an image at a time into the document. The same is, I still have the old pages around, and we had done a very similar thing with it, several times, but this one was started with 3.0.1 and saved as a 3.0.1 document. The amount of time put into it, at this point, is non-trivial.
When things go very badly, iPhoto and Pages conspire together to lock the computer up wholly and completely. I'm unable to kill Pages, at all, from the command line. I have been able to kill iPhoto from the command line, but it doesn't change anything, and I really hate to do it. If I issue a shutdown from the command line, it doesn't something is preventing us from getting a clean shutdown.
And I've had varying degrees of success registering my products, but they're all recent purchases and I've got serial numbers that appear to all them to work even if I'm unable to send in the registration over the internet. They're family versions.
Issue 6: Now that frequent hard restarts, I have mds and mdworker tacking up several CPUs on restart for an extended period of time. I've never been able to get any clarification on what these 2 processes do, but they keep my from doing anything useful for a good long period of time. Looking at the process listing, they appear to be in the MetaDataService suite of OSX apps, and that's about all I've been able to determine looking at man pages and several searches of apple sites.
Issue 7: Only on the G4 Mac, periodically I'll get the gray overlay of "You must restart your computer now." The thing is, things still appear to work somewhat, and what I've been able to see is that one of the CPUs appears to be offline in the activity monitor, which I always have up. I'm able to quit cleanly, AFAIK, out of most of the things I have running, but can't issue a normal shutdown, always requires hard reset (power button for 8 seconds or whatever the timeframe). spindump appears to be the culprit, or instigator. The CPU going offline is troubling. Not sure if I have a CPU going bad or a software problem with an app. The logs are riddled with all kinds of errors, but nothing indicative of what the problem is in fact.
This probably won't all post, and I don't expect everyone to take a stab at any and all of the issues. Just a less than gruntled user, and long time supporter, less than impressed lately. The features are big sellers and instigated a lot of the upgrade. For instance, I love spaces, some of the new themes in iDVD, and a lot of other things. I could do without the instability.

Oh, well that was a whole other kettle of fish:
Oh the G4 I attempted to install iLife '08 before Lepoard was available. About the only thing that installed cleanly was iPhoto. I ended up reinstalling everything back to iLife '06, and then upgrading back to the current stable version of the iLife '06 version. I didn't attempt a reinstall until after I upgraded to Leopard.
When I did reinstall, I made a iLife '06 folder, copied all iLife apps into it, and upgraded. Seemed to work, except for the part where iMovie gets left behind and iDVD is only mostly functional.
When I installed on the other 2 machines, it was after installing Leopard and all upgrades. On those 2 machines, I didn't bother with the copy, I just moved everything to the iLife '06 folder I created, and did a fresh install.
I didn't have to do anything with the iPhoto Libraries, that I can recall.
I always do an upgrade, never an archive and install. I've never had a problem with this back to 10.1 or 10.2.

Thunderbird issues with Leopard

Similar Messages

Maybe you are looking for