Thunderbird - Messages in Inbox missing???

Hello,
I was checking the messages in my Inbox earlier and all was ok.  I clicked out of my e-mails and then came back
about a half hour later and found all the messages in my Inbox were gone.  
Does anyone know what might have happened and how I might be able to retreive them
Thanks

Benjamin,
Welcome to the Discussions.
AOL only allows messages to stay in the Inbox on the server for 27 days, per their policies. The AOL account is by their advice set as an IMAP, and the messages in the Inbox are not kept on your Mac, but on the server. To keep longer, you must manually move the messages to the Saved folder which will be found in the lower section of the Sidebar.
Ernie

Similar Messages

  • In using mail with my mackbook air with maverick, to open a message takes time as if the message is downloaded & its same every time I want to open the message from inbox.

    In using mail with my mackbook air with maverick, to open a message takes time as if the message is downloaded & its same every time I want to open the message from inbox.

    WoW! I'm surprised by the speed you reply and how serious you are with your answers! Thank you very much guys!!!
    Replying to Toad-Hall:
    I have a proper mailing list created as the manual says. It's a small group of contacts that exist in the address book. I do not type them as CC I just write "clients" and before I finish the word the name of the list appears.
    How can I stop Avast from scanning out going mail? It's the free version and I haven't found a real solution. I also tried to totally turn off the "mail shield" but I kept facing the same issues. However, I just turned it off and tried to send the mail, I didn't restart windows or thunderbird
    The idea with ipage server was fantastic! It would never come to my mind!!! As far as I see, the limit is 250 mails per hour. I doubt if I have ever reached the 50% of it. I also don't reach the bandwith limits... Besides that, if I had exceeded the limit I would get multi responses that "mail was not delivered".
    I want to thank you both for your excellent help so far. I'm sad to say that I still haven't solved the issue. When I made smaller lists, with the same addresses chosen from the address book I could send the messages, having a short delay. I would blame Avast but I tried the same on another laptop with my favourite NOD32 and had the same problem.
    What else should I check? Should I focus on Avast?

  • Email messages don't display in thunderbird message pane but wdseml file is good.

    There are some email messages that don't display correctly in the Thunderbird message pane.
    Either the pane is completely empty or chunks of html show up in the pane.
    I checked the actual email file stored in:
    C:\Users\Dave\AppData\Roaming\Thunderbird\Profiles\d976yxfm.default\Mail\pop-server\Inbox.mozmsgs
    and it looks good, as the Windows 7 explorer window is able to show the email message cleanly in the preview window.
    When I click on "View Source", it shows the wrong source file, I think.
    The text in the "view source" window doesn't match the text in the ".wdseml" file at all.
    Note: I recently migrated my C drive from a spinning hard disk to an SSD, perhaps this caused the weirdness? But, most of my email messages do display correctly, just some of them are hosed.
    Any ideas how to fix?
    Currently running Windows 7, 64 bit, latest update from Microsoft (as of 3/13/2014).
    Thunderbird version 24.3.0.
    Thanks for any help you can offer.

    Windows still has a command processor.
    So no need for bash.
    type CMD into the search box to locate it
    If you can use bash I assume your familiar with CD to change folders.
    One little thing I use to save typing is I locate the folder in Explorer, click beside the path so it changes to a C:\ based item and use Ctrl + C to copy it and paste it into my CMD session. CTRL+V does not work, but edit on the windows system menu does.
    To rename the files, navigate to the folder they are in and Copy *.wdseml *.eml
    once you do the import return and del *.eml to clear out the duplicates from the first step.

  • Text Message incomplete or missing? Also-SMS editing / backspace malfunction...

    First issue - sometimes I received text messages that are missing the last few words/characters. I don't think this is an Android or iPhone originated issue as this happens at random from people that I know have different types of phones. Sometimes the 160 character split will break up the message and send the rest in another message, but most of the time I never see the end of the message. I currently use the existing text messaging app in conjunction with the SMS pop-up. The issue was prevalent when I used Handcent and then uninstalled it to see if that was the problem. I have also uninstalled SMS pop-up to see if it was the problem with no luck. I have looked over the settings multiple times and still cannot find anything that would be causing this. Suggestions are welcome.
    Second issue - when editing a text message in portrait mode I may erase multiple characters by holding down the backspace key. On occasion, the app flips out, reverts to showing the very first message that was sent or received for the contact, freezes momentarily, and then two buttons appear on the bottom giving me the option to Cancel or Delete. I will hit Cancel or use the back button on the bottom of the phone multiple times before it will return to my message, which at this point has saved as a draft. This is EXTREMELY frustrating. It does it only at random, but it seems to be getting more frequent. The only option most of the time is to go Home and then return to text messages, find my draft, and use the backspace key carefully (and one quick push at a time to erase) so as not to invoke the same issue.
    I think both of these are bugs that may be inherent with this phone in particular or possibly Gingerbread...
    Thanks!
    -Wes

    I've been having this same issue for the past few months, in my case the problem seems to be more prevalent with text messages originating from other carriers (but not always, occasional partial incoming text issues from Verizon wireless phones as well).  I called technical support, followed all their advice (basic tech advice, power cycle, remove sim, reboot, etc.) and was also transferred to HTC support that recommended a hot fix, which didn't really do anything to resolve the issue, also then did a factory reset and still no resolution.  Not sure what other options I have....besides waiting for a new device when I am able to upgrade.  Off topic, I think its Bee S to not be able to upgrade to a new device within 2 years, when Verizon does not fully support, properly updated/hotfix, existing issues in a timely manner...why is it that we are using and outdated OS, when a new one is out and available.  Another compelling argument to purchase an iPhone (on any carrier), one device, one OS.....everyone gets an update at the same time, and phone issues are rapidly resolved. I can continue my rant, but I'll leave it as is...same issues, different day and I'm sure you've all heard the same rants of frustration.

  • When I try to install iTunes on my Windows computer I get an error message, "Apple Mobile Device failed to start".  After an incomplete installation when I try to open iTunes I get an error message, "MSVCR80.dll missing".  I downloaded MSVCR80.dll.

    When I open iTunes I get an error message "MSVCR80.DLL missing".  I downloaded this .dll and installed in C:\Windows|System32.  I then scanned my computer to fix registry errors.I uninstalled iTunes and reinstalled and got the following error message "Apple Mobile Device failed to start".

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Getting an error message about a missing file when I try to open Firefox

    When I tried to open Firefox today I received a message about a missing file (Wrusr.ddl) and that Firefox was not able to open. I tried uninstalling and reinstalling but it did not work. I have no idea what that file is or where is went. I used Firefox 2 days ago and it was working fine. The only thing that changed between then and today was that I renewed my antivirus software but I definitely did not delete any files and I made sure that Firefox is allowed to access the internet. I've been using that same software (Webroot) with Firefox for years and never had any issues before today. Any help would be greatly appreciated! I have included a screenshot of the error message below.

    hello angelag.132, the WRusr.dll file is part of Webroot SecureAnywhere - try to reinstall or uninstall that software.

  • How to change the message in the Missing Plug-in dialog?

    Hi, all.
    I want to change the message in the Missing Plug-in dialog
    when a doc is opened containg data from a missing plug-in.
    I defined MissingPluginURLValue and MissingPluginAlertValue in ID.h
    which are used in ExtraPluginInfo.
    But there is nothing changed in the Missing Plug-in dialog.
    Can someone help me?
    BestRegard.
    Miya.

    As far as I know you can't change that on CUCM.
    On CME you can.
    Bye,
    Jan
    Sent from Cisco Technical Support iPad App

  • I have Photoshop 7 on a laptop with windows 8.1.  When I try to open Photoshop 7 I get the error message "cannot open missing personalization information".  What is this and how can I fix it?

    I have Photoshop 7.0.  This is on a laptop running windows 8.1.  When I try to open it I get the errro message: " cannot open missing personalization information".
    what is this and how can I fix it.

    Run it in compatibility mode and input the credentials.
    Mylenium

  • When starting InDesignCS2 received new error message -- InDesign is missing required system fonts or

    We are not able to start Indesign CS2 without getting the error message: <<InDesign is missing required system fonts or CMap files. Please reinstall InDesign.>> This is on WinXP.<br /><br />Recently I installed Creative Suite CS4. It took almost a day to install. The installation kept on stopping. Each time we were able to install one more program. After checking all of the programs we discovered that Firefox would not start due to a possible font error. After reading many posts I decided to uninstall a lot of fonts since I did not know which one was the culprit. <br /><br />However now I am missing a font (at least I hope that this is caused by a missing font and not anything else) that should be there and I don't know which one it should be. I did uninstall a <lot> of fonts and don't remember which ones.<br /><br />WE did uninstall all CS2 programs and then reinstalled only the necessary three. However that did not make any difference.<br /><br />Any ideas and suggestions would be welcome<br />Thanks<br />Pia Pehtla

    A forum search for "missing required fonts" brings up this thread which should solve your problem:
    http://www.adobeforums.com/webx?128@@.3bbdb0a7
    Peter

  • I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing

    I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing???

    First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
    http://www.apple.com/itunes/download/
    If you still get the errors after that, try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • A link in a thunderbird message fails to activate firefox but if i copy & paste it in the ffx location bar, it goes to the linked web page

    a link in a thunderbird message fails to activate firefox but if i copy & paste it in the ffx location bar, it goes to the linked web page. Also, some web page links are failing except that some will work if i use right-click with open in new tab. just updated ffx to 3.6.13, then updated java per mozilla notification (plugin checker)

    Hi Larry,
    Thanks...that was one of the things I first tried. I did a save as another document.
    I also resized the image in PS so it would be at 100% of size, figuring that would help and I made the image box's background white instead of none, but nothing so far.
    It almosat seems like it is coming from the origianl template file?
    Babs

  • How to create a folder (in unified folders) which contains all the messages of inboxes and outboxes

    Hi, i've searched without success how to create a folder (in unified folders) which contains all the messages of inboxes and outboxes (as it exists in Windows Live Mail).
    For me, it would be very useful to search in only one folder when i try to find something in sent and received mails.
    Thank's

    This is what Unified Folders does. I'm not sure what exactly you're trying to achieve.
    http://kb.mozillazine.org/Global_Inbox#Unified_Folders
    You might take a look at this article.
    https://support.mozilla.org/en-US/kb/global-search

  • Mail 4.1, Exchange, and Duplicate messages in inbox

    Using Snow Leopard and Mail 4.1 to access an exchange account and a gmail account. The problem ONLY occurs in the Exchange account. My messages are all duplicating. Only in Mail are they duplicating. I've checked Outlook Web Access and Outlook on my windows machine - no duplicates there. Didn't start out this way, and the problem came once before, stopped, and now it has returned. If I delete one copy of the message, both messages get deleted. Is there someway to rebuild the mail inbox? or resync?
    Also, tried creating a new folder on the exchange server, copying all messages from inbox to the new folder, then moving back. In the temp/new folder, the messages were single. After copying back to Inbox - they doubled again. And again, only in Mail. The msgs remain single in Outlook, OWA, iPhone, Blackberry.
    UPDATE: I highlighted the exchange mailbox and went to MAILBOX > REBUILD. Erased everything but only in Mail. The messages are still on the Exchange server and can be seen by OWA, Outlook, iphone and blackberry. New messages are going to the Mail Exchange inbox but old messages are gone. Any way to get them back?
    Message was edited by: Atlantax

    FromBone wrote:
    Thanks V.K.! So there is no chance for me to re upload all the messages from my mac to my yahoo inbox.
    nope.
    May I ask yahoo to that?
    you can ask but they won't say anything different.
    I could never have known that the default setting on mac's mail would be "remove copy from server after retrieving a message".
    now, that's a valid point. this is not exactly advertised and mail setup assistant does not tell you anything about it. you can voice your concern to apple about this issue here
    http://www.apple.com/feedback/macosx.html
    I wish apple had some kind of a solution for this.
    there isn't anything you can do now. it's not up to apple at this point. you just can't upload messages to a POP email server. it does not matter what email client or what operating system you are using.
    Thanks again

  • Error in SXMB_MONI - "Message Recorded (Commit Missing)"

    We have implemented BADI BADI_LE_SHIPMENT~BEFORE_UPDATE to call asynchronous proxy to send a message to PI system. This proxy is called inside a loop to send message for each delivery in the shipment. Some messages are successful and some are in scheduled status with error 'Message Recorded (Commit Missing)'. This error is coming only for particular interval and we dont see any PI outage at that time. And also we do not see any entries in queue(SM58, SMQ1, SMQ2). Searched in SDN, people are suggesting to use commit work after the proxy call but I am concerned to use commit inside a Badi. I have more than 1000 messages in production, can not reprocess all the messages manually from SPROXY. Please give me your suggestion to resolve this issue.

    Hi,
    If u want to manually unlock then u need to go to transaction SMQR,SMQ1,SMQ2 for queue management. There u have to select the queue and activated all entries.
    SMQ1 – qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
    SMQ2 – qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
    U may schedule the report RSQOWKEX (Outbound Queues) and RSQIWKEX (Inbound Queues) to restart the queues automatically.
    After that please register the queues via t.code sxmb_adm where u have an option manage ques.
    Once you register the queues, they default activated.
    Regards,
    Pradeep A.

  • When my phone is looked, i would see or hear that there is a message or a missed call

    When my phone is looked, i would see or hear that there is a message or a missed call on my phone;
    Is it an App that enable this function?

    http://www.apple.com/feedback/

Maybe you are looking for