Thunderbird works fine, Apple Mail can't send (and other problems)

I have both Thunderbird and Mail setup exactly alike. Thunderbird can send mail just fine, every time, from any location. Mail was able to send messages a few times but for the last few days refuses to send anything.
Here's the setup:
Four smtp servers
mail.bellsouth.net
mailer.louisiana.edu
smtp.coxmail.com
smtp.central.cox.net
each is setup with password SSL authentication. Each works just fine on any other computer and even on this one with Thunderbird. Apple Mail is the only problem. (and yes - ALL SETTINGS ARE EXACTLY CORRECT)
NO - port 25 is NOT the issue - it works fine with other software on this computer and others - it is ONLY Apple Mail which can't manage to connect to the servers.
I use an AirPort extreme and have reset it repeatedly. (I can usually connect to an smtp after doing so but only until Mail attempts to send) I have tried a direct ethernet connection as well. Same results.
Mail refuses to connect to any smtp server. (it connects to the POP servers just fine) Occasionally, if I retype in the smtp password, or even delete it and turn off SSL, it will connect for a short time. (until I try to send a message)
What's the deal?
I see others have similar problems, but all seem to be ISP related. In this case, I've controlled for everything I can think except Apple Mail.
A few other problems, maybe related or not:
Mail has NEVER saved any messages I have sent out in any type of 'sent' folder. Sometimes the folder appears, sometimes it doesn't, but it is always empty. And yes, the setting to 'delete messages in the sent folder' is set to NEVER. So they should all be there.
Additionally, the very FIRST note I created was saved in my Inbox as it should have been. NOT ONE single subsequent note has saved - I lost every one of them. (I also can't seem to find any means to manually save the note - how ridiculous)
Finally, though it isn't that important at the moment, when Mail can't manage to connect to an smtp server, it just sits there and tries to send forever. Sometimes it will tell me it failed and suggest another server, sometimes not. In all cases, there does not seem to be a "STOP" button or command to tell Mail to quit transmitting/receiving.
I'd really like to use this program since it integrates with iCal and Addressbook, but this is getting absurd.
Thanks for any help anyone can provide.

Who is your isp?
If it is Cox they say on their site that you have to use only their smtp server.
Other than the mailer server (of which I have no info), I question the ssl setting.
Cox specifically say to not use ssl when setting up the outgoing server.
Bellsouth do not appear to require authentication and do not use ssl either.
AT&T Help Center Online: How To: Set Up Your AT&T Email Account Using Apple Mail 2.1 on a Mac OS 10
http://help.bellsouth.net/bellsouth/asp/contentview.asp?isbrowse=true&sprt_cid=d 5442d40-acde-4d94-9192-0ae128b2ca78
"each is setup with password SSL authentication. Each works just fine on any other computer"
Are any of the other computers mac's?
You say that "it works fine with other software on this computer" - what is this other software that is using ssl and port 25 to connect to the smtp servers?
Port 25 is not used for ssl, use either 587 (standard) or in some cases 465 (non-standard).

Similar Messages

Thunderbird works, but Apple Mail does not...

My issue is this:
Mozilla Thunderbird works great with my current POP account. Thunderbird can both receive and send messages--no problem.
Apple Mail cannot receive messages, but it can send them.
All the account settings are exactly the same. The only difference I can find is that in Thunderbird's Security Settings (under Server Settings in Account Settings) you have the ability to check "TLS, if available".
Anyone have any ideas why Mail can't receive messages?
I love the new Apple Mail and really want to use it.

Process:
Mail [891]
Path:
/Applications/Mail.app/Contents/MacOS/Mail
Identifier:
com.apple.mail
Version:
8.0 (1990.1)
Build Info:
Mail-1990001000000000~3
Code Type:
X86-64 (Native)
Parent Process:
??? [1]
Responsible:
Mail [891]
User ID:
501
Date/Time:
2014-10-20 10:02:25.944 +0200
OS Version:
Mac OS X 10.10 (14A389)
Report Version:
11
Anonymous UUID:
EEE8371F-5DEA-6CE7-ED9E-F26E11B0AE95
Sleep/Wake UUID:
0FFBEA5A-AD12-4AD5-A342-FD07F8296C6C
Time Awake Since Boot: 4700 seconds
Time Since Wake:
1500 seconds
Crashed Thread:
8 Dispatch queue: NSOperationQueue 0x60000023de60 :: NSOperation 0x60000024ac80 (QOS: USER_INTERACTIVE)
Exception Type:
EXC_CRASH (SIGABRT)
Exception Codes:
0x0000000000000000, 0x0000000000000000
Application Specific Information:
*** Terminating app due to uncaught exception 'NSObjectInaccessibleException', reason: 'CoreData could not fulfill a fault for '0x1580008b <x-coredata://5BB142CF-4001-4155-AC9B-FB0681E69B5E/ABCDNote/p86>''
abort() called
terminating with uncaught exception of type _NSCoreDataException
Did not help: reinstalling, deleting files, email, etc...
Solution: Deleting contacts (contact data corruption caused by) :-))
(All of them manually from within the app, and files: User > Library > Application Support > AddressBook)

Apple Mail - Can't Send - Buttons do not respond

I have a new mac on the network,I setup a pop3 account in Apple Mail. It received fine but will not send.
No errors are reported. When I create a new message and click the send, it doesn't nothing. Same response as if I click save as draft. I have tried just changing the smtp settings but it doesn't make any difference. Any suggestions?

Are you really running Mac OS X 10.4.1, as your profile indicates? If not, then please update the Operating System field on your My Settings’s profile (and click Save), so that it accurately reflects the version of Mac OS X you’re running now. This is essential information that should always be provided when asking for help.
This problem in Mail is usually caused by some Launch Services cache or preferences corruption that affects the built-in spell checker. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.

Apple Mail can never send messages!

I have a gmail account that I view through Apple Mail. Anytime I try to send a message to someone, I get this error.
"Cannot send message using the serve smtp.gmail.com:[email protected]
Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your Network settings.
Message from : <[email protected]>
Send Message using: smtp.gmail.com:[email protected]
Options: Cancel, Use Selected Server, or Try Again Later."
Ususally, I click Use Selected Server and it works but sometimes it doesn't. First of all, it should work the first time around and never give me this message. Secondly, even after the second attempt it's not 100% reliable.
What's wrong?
P.S.

Never Mind. Fixed it.
Apple Mail users: At times, Mail may misinterpret your SMTP server settings. If you currently have 'smtp.gmail.com:[email protected]' in the 'Outgoing Mail Server:' field of your settings, please try changing the field to 'smtp.gmail.com' and saving your settings.

IE 11 is crashing running a scenario whereas its working fine on earlier versions of IE and other browsers

Hi,
we have A CRM application having some customer related scenarios, like create customer, accounts,address etc.
while, when we browse through the Create Customer scenario from lets say, page1 to page2 the browser is getting crashed.
the same scenario is working fine in all earlier versions of IE and other browsers like chorome.
below is the Crash dump analysis and Event viewer logs. appreciate the help provided
Event Viewer:
Faulting application name: IEXPLORE.EXE, version: 11.0.9600.17207, time stamp: 0x53a20c50
Faulting module name: MSHTML.dll, version: 11.0.9600.17207, time stamp: 0x53a22b71
Exception code: 0xc0000005
Fault offset: 0x000b4642
Faulting process id: 0x2140
Faulting application start time: 0x01cfd3d7a8a61dfc
Faulting application path: C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE
Faulting module path: C:\windows\system32\MSHTML.dll
Report Id: 177f4288-3fcb-11e4-9783-d4bed98dc920
Crash Dump:
0:005:x86> !analyze -v
*                        Exception Analysis
*** ERROR: Symbol file could not be found. Defaulted to export symbols for IPSBHO.DLL -
*** ERROR: Symbol file could not be found. Defaulted to export symbols for Scxpx86.DLL -
*** ERROR: Symbol file could not be found. Defaulted to export symbols for jvm.dll -
*** WARNING: Unable to verify checksum for atidxx32.dll
*** ERROR: Symbol file could not be found. Defaulted to export symbols for atidxx32.dll -
FAULTING_IP:
wow64cpu!CpupReturnFromSimulatedCode+0
7536271e 6744            inc     esp
EXCEPTION_RECORD: ffffffffffffffff -- (.exr 0xffffffffffffffff)
ExceptionAddress: 000000007536271e (wow64cpu!CpupReturnFromSimulatedCode)
   ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: 0000000000000000
Attempt to read from address 0000000000000000
CONTEXT: 0000000000000000 -- (.cxr 0x0;r)
eax=00000000 ebx=0331dd60 ecx=0e6bfa30 edx=132d7f38 esi=fffffffe edi=00000000
eip=66d94642 esp=0400b0d8 ebp=0400b394 iopl=0         nv up ei pl nz na po nc
cs=0023 ss=002b ds=002b es=002b fs=0053 gs=002b             efl=00010202
MSHTML!CElement::ComputeFormatsVirtual+0x13d:
66d94642 f7809c01000000080000 test dword ptr [eax+19Ch],800h ds:002b:0000019c=????????
FAULTING_THREAD: 0000000000002e38
PROCESS_NAME: IEXPLORE.EXE
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_PARAMETER1: 0000000000000000
EXCEPTION_PARAMETER2: 0000000000000000
READ_ADDRESS: 0000000000000000
FOLLOWUP_IP:
wow64cpu!CpupReturnFromSimulatedCode+0
7536271e 6744            inc     esp
NTGLOBALFLAG: 0
APPLICATION_VERIFIER_FLAGS: 0
CHKIMG_EXTENSION: !chkimg -lo 50 -d !KERNEL32
    76fc3490-76fc3496 7 bytes - KERNEL32!FreeLibraryStub+8
[ 90 90 90 90 90 8b ff:e9 95 cc 69 8d eb f9 ]
7 errors : !KERNEL32 (76fc3490-76fc3496)
APP: iexplore.exe
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
LAST_CONTROL_TRANSFER: from 0000000067369b63 to 0000000066d94642
ADDITIONAL_DEBUG_TEXT: Followup set based on attribute [Is_ChosenCrashFollowupThread] from Frame:[0] on thread:[PSEUDO_THREAD]
BUGCHECK_STR: APPLICATION_FAULT_MEMORY_CORRUPTION_NULL_POINTER_READ_ZEROED_STACK_LARGE
PRIMARY_PROBLEM_CLASS: MEMORY_CORRUPTION_LARGE
DEFAULT_BUCKET_ID: MEMORY_CORRUPTION_LARGE
STACK_TEXT:
00000000`00000000 00000000`00000000 memory_corruption!KERNEL32+0x0
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: memory_corruption!KERNEL32
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: memory_corruption
DEBUG_FLR_IMAGE_TIMESTAMP: 0
STACK_COMMAND: ** Pseudo Context ** ; kb
FAILURE_BUCKET_ID: MEMORY_CORRUPTION_LARGE_c0000005_memory_corruption!KERNEL32
BUCKET_ID: X64_APPLICATION_FAULT_MEMORY_CORRUPTION_NULL_POINTER_READ_ZEROED_STACK_LARGE_memory_corruption!KERNEL32
IMAGE_NAME: memory_corruption
ANALYSIS_SOURCE: UM
FAILURE_ID_HASH_STRING: um:memory_corruption_large_c0000005_memory_corruption!kernel32
FAILURE_ID_HASH: {a0ab76e6-7b43-6c55-901f-3d438fac77d6}
Followup: MachineOwner
thanks

Hi,
There are some symbol file errors in the analyzed result, please upload the dump file to a public location such as OneDrive, then paste the dowload link here.
Meanwhile, what about other webpages? please test whether this issue happens in other IE 11 or similiar systems, check whether this is a common issue or a specific issue.
Keep latest Windows Updates especially for IE updates.
Test IE in no add-ons mode, if issue disappears, then it could be cauesd by an incompatible add-on
Type "internet" in start menu--search box, click "Internet Explorer (No add-ons)"
Yolanda Zhu
TechNet Community Support

Classic won't start, can't upgrade, and other problems...

There's something not quite right with my Mac, and I can't quite pinpoint it. Because of this, I'm not even certain I'm posting this in the right forum! Here's the situation:
I have a PowerMac G4, upgraded with a an extra hard drive, an ATI Radeon Pro graphics card, a Sonnet Duet G4 Dual 1.8GHz processor, and (as of today, prior to this 10.4.7) am running OSX 10.4.8.
When I got the machine, it came with OS 9.1 installed. I later upgraded to 9.2.2, and then eventually to OSX. My Classic system folder stayed at 9.2.2
About 10 days ago I installed the Sonnet processor upgrade. In order to do so, I had to rejig my system a bit, as the installer for the upgrade only works in 9.2 and not Classic (yeah, bad call on Sonnet's part).
I partitioned my Back-Up drive, and installed 9.2 on it, installed the software for the processor, and then the processor itself. After checking everything worked, I then unpartitioned my Back-Up drive and removed OS9.2.
Although the processor works fine, and has doubled the speed of most tasks, ever since it was installed, I have been prone to crashes. Most often when working with large files in various applications such as Photoshop.
Also, Classic won't start now. I hardly ever use Classic these days, only for one or two tiny programs I could live without, but the fact that it refuses to start is niggling me. I reinstalled OS9.1 from my original disk, and now I can't upgrade to 9.2: all that happens is I get a message saying that I have 9.1 and that it is recommended I upgrade to 9.2! But Classic won't open, so I can't upgrade to 9.2.
The next thing that's started happening is that my broadband connection keeps dropping. This never happened before. This is happening so frequently it's really annoying; the only thing that cures it is a restart, but restarting 10 times a day isn't funny. I'm using an Alcatel Speedtouch ADSL modem. This has worked fine for over a year.
Yesterday I tried setting up a wireless connection with a Belkin router, replacing my USB modem, so my wife can use her Windows laptop to surf from the same broadband connection (my Mac doesn't need to be wireless enabled itself). But this hasn't worked, even though we followed the instruction manual exactly. I suspect that the reason this hasn't worked was because of the underlying problem on my Mac, whatever it is. I've gone back to using the Speedtouch modem to connect to the internet for now.
I've just today done a complete system reinstall of OSX 10.4, and downloaded the upgrade to 10.4.8, in an effort to solve this. Unfortunately, my Mac still seems to be in the same state and it hasn't solved anything. Classic still won't open, the connection still keeps dropping, and I'm almost at the point of kicking the **** thing through a window! Please, has anyone got any bright ideas? I don't know where to start....
G4 Digital Audio Mac OS X (10.4.8)

Hi, thanks for responding.
I've made a couple of changes, double-checked everything, and I have to say that now 10.4.8 has been on my machine for a few days, it's a lot more stable. No crashes. Maybe it just needed to "settle in", ha ha. I also got a router and went wireless, something I needed to do so my wife could use her laptop to get online. This seems to have solved the connection dropping.
So the only thing left is not being able to open Classic. I think maybe you're right, and the new processor doesn't like Classic. But, to tell the truth, I hardly ever use Classic anymore, and I can live without it. So I think I'll leave everything as it is for now, unless something major happens. I spent nearly £500 on the processor upgrade, and it has doubled the speed of my Mac: I really don't want to have to take it out:-)

Apple Mail can't send or receive messages from Exchange 2010, Mountain Lion

Over the last several weeks, I have been unable to send or recieve e-mails from Exchange 2010 in a corprate environment. I have deleted and re-added the account several times, and sometimes it will fix the issue. Other times it won't. I have also tried deleting the account, clearing the cache in ~/Library/Mail/V2/EWS*, and then re-adding the account. It resolves the issue temporarily, but then returns to not being able to sync. I've tested it with a number of other users accounts on the same Exchange system, and it's working as expected. OSX is version 10.8.4 with current patches as of 10/7/2013.
The connection doctor shows that the connection to EWS is green. The activity monitor looks like it's updating the folders properly on sync.
Here is the message I get in the logs in high volume when Console logging is turned on:
*** Assertion failure in -[EWSConnection sendMessage:forRequest:], /SourceCache/Message/Message-1508/Message/EWS/EWSConnection.m:555
Received an unexpected error: Error Domain=EWSExchangeWebServicesErrorDomain Code=277 "The operation couldn’t be completed. (EWSExchangeWebServicesErrorDomain error 277.)" UserInfo=0x7fd1c9a97e70 {EWSErrorMessage=The request failed schema validation., NSUnderlyingError=0x7fd1c85106f0 "The operation couldn’t be completed. (SOAPWebServicesErrorDomain error -1000.)"}, response: (null)
          0   CoreMessage                         0x00007fff86a4a517 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 141
          1   CoreMessage                         0x00007fff86a4a388 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 215
          2   Message                             0x00007fff8daa5a8e -[EWSConnection sendMessage:forRequest:] + 762
          3   Message                             0x00007fff8daaeab3 -[EWSGateway sendMessage:forRequest:] + 69
          4   Message                             0x00007fff8dac543a -[EWSRequestOperation executeOperation] + 110
          5   CoreMessage                         0x00007fff86a65b80 -[MonitoredOperation main] + 219
          6   Foundation                          0x00007fff92475926 -[__NSOperationInternal start] + 684
          7   Foundation                          0x00007fff9247d0f1 __block_global_6 + 129
          8   libdispatch.dylib                   0x00007fff87f4af01 _dispatch_call_block_and_release + 15
          9   libdispatch.dylib                   0x00007fff87f470b6 _dispatch_client_callout + 8
          10 libdispatch.dylib                   0x00007fff87f481fa _dispatch_worker_thread2 + 304
          11 libsystem_c.dylib                   0x00007fff9068ad0b _pthread_wqthread + 404
          12 libsystem_c.dylib                   0x00007fff906751d1 start_wqthread + 13

Over the last several weeks, I have been unable to send or recieve e-mails from Exchange 2010 in a corprate environment. I have deleted and re-added the account several times, and sometimes it will fix the issue. Other times it won't. I have also tried deleting the account, clearing the cache in ~/Library/Mail/V2/EWS*, and then re-adding the account. It resolves the issue temporarily, but then returns to not being able to sync. I've tested it with a number of other users accounts on the same Exchange system, and it's working as expected. OSX is version 10.8.4 with current patches as of 10/7/2013.
The connection doctor shows that the connection to EWS is green. The activity monitor looks like it's updating the folders properly on sync.
Here is the message I get in the logs in high volume when Console logging is turned on:
*** Assertion failure in -[EWSConnection sendMessage:forRequest:], /SourceCache/Message/Message-1508/Message/EWS/EWSConnection.m:555
Received an unexpected error: Error Domain=EWSExchangeWebServicesErrorDomain Code=277 "The operation couldn’t be completed. (EWSExchangeWebServicesErrorDomain error 277.)" UserInfo=0x7fd1c9a97e70 {EWSErrorMessage=The request failed schema validation., NSUnderlyingError=0x7fd1c85106f0 "The operation couldn’t be completed. (SOAPWebServicesErrorDomain error -1000.)"}, response: (null)
          0   CoreMessage                         0x00007fff86a4a517 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 141
          1   CoreMessage                         0x00007fff86a4a388 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 215
          2   Message                             0x00007fff8daa5a8e -[EWSConnection sendMessage:forRequest:] + 762
          3   Message                             0x00007fff8daaeab3 -[EWSGateway sendMessage:forRequest:] + 69
          4   Message                             0x00007fff8dac543a -[EWSRequestOperation executeOperation] + 110
          5   CoreMessage                         0x00007fff86a65b80 -[MonitoredOperation main] + 219
          6   Foundation                          0x00007fff92475926 -[__NSOperationInternal start] + 684
          7   Foundation                          0x00007fff9247d0f1 __block_global_6 + 129
          8   libdispatch.dylib                   0x00007fff87f4af01 _dispatch_call_block_and_release + 15
          9   libdispatch.dylib                   0x00007fff87f470b6 _dispatch_client_callout + 8
          10 libdispatch.dylib                   0x00007fff87f481fa _dispatch_worker_thread2 + 304
          11 libsystem_c.dylib                   0x00007fff9068ad0b _pthread_wqthread + 404
          12 libsystem_c.dylib                   0x00007fff906751d1 start_wqthread + 13

Mail "evaluating messages" forever -- and others' problems

I suspect something's up with Mail.app. I've read several threads of people in the last few days having trouble with Mail. For some of them, they have to go to the Web to get their mail. For me, Mail is "evaluating messages" for up to ten minutes at a time. When the mail finally arrives, there are no large attachments or freaky spam emails. Can't for the life of me figure out why it's taking so long to download -- or, in some others' cases, not downloading at all
Ti PowerBook G4 Mac OS X (10.4.6)

Arvin,
This preference applies only to IMAP and .mac type accounts. With those types the Inbox, and usually other mailboxes, reside on the server, and NOT on your Mac and HD. When the preference is set to Keep for Offline viewing then you can read when not Online. The downloading for this is not permanent, and happens repetitively, each time you connect.
When set to Don't Keep, then only messages you desire to open, during that session are downloaded.
Keep us informed.
Ernie

I can't access the internet with Firefox on my computer (Windows 7 PC). I have used Firefox as my browser for 1 year but 5 days ago it stopped working even though Internet Explorer worked fine. I can't solve the problem and need some help.Randy Brown

September 26, 2011
Dear Mozilla,
I am having some difficulty accessing the internet with Firefox on one of my PC computers. I normally use Mozilla Firefox as my web browser and google is my homepage and gmail is my email system. The operating system is Windows 7. For over a year this system worked perfectly but a few days ago it stopped working. When I launch Firefox now I get the message that that website (www.google.com) is unavailable. In fact, I can’t access any website and I am blocked from the internet entirely within Firefox. My internet connection is fine because Internet Explorer works fine. I can access google and any other website within that web browser. I have investigated all the security issue I can manage and found no smoking gun. I’ve tried uninstalling and reinstalling Firefox to no avail. Is Windows 7 compromising the effectiveness of Firefox? Any suggestions or other assistance you can offer would be appreciated.
Sincerely,
Randy Brown
[email protected]

You only have to clone your mac when using certain cable modem. You don't clone your mac when using dsl.
Greetings from Northern Ontario, Canada

Hi I have a mac osx lion10.7.3 and i can't get my mail set up with a blue yonder.co.uk address inbox works fine but i can't get outbox to work will not send mail any idea's thank's

Hi I have a mac osx lion10.7.3 and i can't get my mail set up with a blueyonder.co.uk address inbox works fine but i can't get outbox to work will not send mail any idea's thank's

And, you are sure you have provided the correct username and password for you email account? I'm not familiar with Virgin media, so you might contact their tech support to find out why you are having a problem sending mail but none receiving mail. I assume your mail account has always been POP3 and not IMAP. Typically, the outgoing mail servers are not the same for the different types of account service.

Sending email with Entourage worked, but Apple Mail fails

I want to migrate from Entourage to Apple Mail. However sending emails using the smtp of my hosted website, fails every time.
I use the same SMTP settings as configured in Entourage, but the connection manager cannot connect to these smtp servers.
When I setup a gmail account, these smtp settings do work, so this is a strange problem.
In the SMTP configuration I have indicated that no SSL must be used and authentication is by Username/Password. Also the default port must be used, so this should be easy.
Does anyone recognise this problem and help me out?
Thanks in advance.

23circles:
I would like to find a way to only have the gmail inbox but still send from any three of her accounts.
You can do it this way:
Set up only one account. The one from which you want to receive mail.
In Mail > Preferences > Accounts > +gmail acct+ > Email Address insert the other email addresses, separating each with a comma and single space.
Only the GMail account will receive incoming Mail. However, when you want to send from another address, in the From dropdown menu toggle the address from which you wish to send mail.
You will, of course, delete the other accounts you have created to avoid getting incoming messages.
cornelius

Can I use Thunderbird instead of Apple Mail application

Hi,
I like Apple's Mail application but it is slow in communicating with AOL. Thunderbird does pretty well and
will both read and send emails via AOL.
But when I use iPhoto or another application and want to share
a picture via email it opens the Apple Mail application by default. Then I must wait for it to talk to AOL, forever.
Can't I somehow make Thunderbird the default outgoing mail app?
Ed

I think the problem is that iPhoto won't let me select Thunderbird as the email application for sending photos. Apparently it only will use Eudora, the AOL reader, Mail, and i think one other program but not Thunderbird.
Ed

I've just setup my new iPad Air. With new Apple ID ect everything working fine, but I can't redeem my iTunes voucher it says wrong password/ user name but they are not wrong. I've reset password same problem anyone help?

II've just setup a new iPad Air for my daughter with a new apple ect, everything is working fine, but I can't get it to redeem the I tunes voucher. It asks for I'd and password, put them in and comes up with wrong Id/password. They are not incorrect answers, but reset password just incase. Same problem. Also tried making another apple account. Same problem again can anyone help?? Please

Your iTunes Voucher is link to the old Apple ID.

I bought a 5 yr old Mac G5 OSx 10.4.11, 2 GHz intel Core 2 Duo processor, 1GB 667 MHz DDR1 SDRAM memory. It works fine but I can't get Thunderbird, Flash Player or Adobe reader to install -- it shows up on desktop as download but not App folder. Why?

Question: I bought a 5 yr old Mac G5 OSx 10.4.11, 2 GHz intel Core 2 Duo processor, 1GB 667 MHz DDR1 SDRAM memory. It works fine but I can't get Thunderbird, Flash Player or Adobe reader to install -- it shows up on desktop as download but not App folder. Why?

The downloads are probably .dmg files (disk images). You would open the disk image (double-click it) to find the application or an installer. If it's the application itself, you then drag the application to your Applications folder to "install" it. If it's an installer, double-click the installer to run the installer that installs the application.
NOTE: If you iMac is Intel, it's not a PPC G5.

Mail worked fine for 2 days on Lion and now I've restarted and get spinning ball. Can't access my mail. At all. Osx 10.7.1 2.26 Ghz Macpro

Mail worked fine for 2 days on Lion and now I've restarted and get spinning ball. Can't access my mail. At all. Osx 10.7.1 2.26 Ghz Macpro

The settings seems to be correct...As you were able to ping the ip 192.168.1.2,it should open the setup page..Try to disable the firewall,ant-virus and other security software if any and then,try...Also try to adjust the browser settings on the computer... Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...Now try..
It should work now...If not then,you have to reset the router and need to reconfigure it again..

Thunderbird works fine, Apple Mail can't send (and other problems)

Similar Messages

Maybe you are looking for