Thunderbolt-Bridge does not work after Yosemite upgrade
Hi,
recently I upgraded my MacBook pro (late 2013) to OS X 10.10.
Now the thunderbolt - gigabit ethernet bridge is not recognised anymore.
More specific the "Network Preference" pan does say that it is disconnected -> no network connection.
At the same time the "System Information" window does say it is connected.
I already tried several reboots, a reboot in save mode and deleting the networks environments to start from scratch.
But nothing helps.
Before the upgrade, the bridge worked fine (sometimes it was recognised slowly).
The bridge itself is a original apple bridge with firmware version 5.5 (PMFV 0.0.8).
Any ideas?
Cheers, freeman
Hmm, there is a lot of red.
EtreCheck version: 2.1.3 (106)
Report generated 16. Dezember 2014 16:28:18 MEZ
Hardware Information: ℹ️
MacBook Pro (Retina, 13-inch, Late 2013) (Verified)
MacBook Pro - model: MacBookPro11,1
1 2.4 GHz Intel Core i5 CPU: 2-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel Iris -
Color LCD spdisplays_2560x1600Retina
PL2409HD spdisplays_1080p
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 7 days 18:4:18
Disk Information: ℹ️
APPLE SSD SD0256F disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 249.77 GB (16.34 GB free)
Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple, Inc. Keyboard Hub
Logitech USB-PS/2 Optical Mouse
Apple, Inc Apple Keyboard
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Apple Inc. Thunderbolt to Gigabit Ethernet Adapter
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Transmit.app
[loaded] com.panic.TransmitDisk.transmitdiskfs (4.0.0 - SDK 10.6) [Support]
/Library/Application Support/Hotspot Shield
[loaded] com.anchorfree.tun (1.1.1 - SDK 10.8) [Support]
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4228 - SDK 10.8) [Support]
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist [Details]
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.lookupd.plist
[failed] com.apple.Maps.pushdaemon.plist
[failed] com.apple.sbd.plist [Details]
[failed] com.apple.security.cloudkeychainproxy.plist [Details]
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist [Details]
[failed] com.apple.ctkd.plist
[failed] com.apple.GSSCred.plist
[failed] com.apple.icloud.findmydeviced.plist [Details]
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist [Details]
[failed] com.apple.nsurlsessiond.plist [Details]
[failed] com.apple.periodic-daily.plist [Details]
[failed] com.apple.periodic-weekly.plist [Details]
[failed] com.apple.softwareupdate_download_service.plist [Details]
[failed] com.apple.systemstats.analysis.plist [Details]
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist [Support]
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[invalid?] com.cisco.anyconnect.gui.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
[not loaded] com.teamviewer.teamviewer.plist [Support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
[running] jp.co.canon.CUPSPS2.BG.plist [Support]
[loaded] org.macosforge.xquartz.startx.plist [Support]
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist [Support]
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[running] com.anchorfree.ajaxserver.plist [Support]
[running] com.cisco.anyconnect.vpnagentd.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[not loaded] com.teamviewer.teamviewer_service.plist [Support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[running] com.spotify.webhelper.plist [Support]
[loaded] com.valvesoftware.steamclean.plist [Support]
User Login Items: ℹ️
Citations Programm (/Applications/Papers.app/Contents/SharedSupport/Citations.app)
Bartender Programm (/Applications/Bartender.app)
iTunesHelper Programm (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
TransmitMenu Programm (/Applications/Transmit.app/Contents/MacOS/TransmitMenu.app)
AeroFS Programm (/Applications/AeroFS.app)
owncloud Programm (/Applications/owncloud.app)
BetterSnapTool Programm (/Applications/BetterSnapTool.app)
Internet Plug-ins: ℹ️
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.235 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
Default Browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Mathematica: Version: 10.0.0 - SDK 10.8 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
AdBlock [Installed]
ClickToFlash [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
TeXDistPrefPane [Support]
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 249.77 GB Disk used: 233.43 GB
Destinations:
TMBackup [Network]
Total size: 982.05 GB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 982.05 GB > (Disk size 249.77 GB X 3)
LACIE SHARE [Local]
Total size: 400.08 GB
Total number of backups: 12
Oldest backup: 2014-10-20 13:12:53 +0000
Last backup: 2014-12-07 20:24:45 +0000
Size of backup disk: Too small
Backup size 400.08 GB < (Disk used 233.43 GB X 3)
Top Processes by CPU: ℹ️
49% WindowServer
3% Little Snitch Agent
1% Mathematica
1% WolframWorkbench
1% coreaudiod
Top Processes by Memory: ℹ️
352 MB Safari
301 MB Mail
232 MB WolframWorkbench
223 MB Finder
129 MB aerofsd
Virtual Memory Information: ℹ️
153 MB Free RAM
2.26 GB Active RAM
2.05 GB Inactive RAM
1.93 GB Wired RAM
99.60 GB Page-ins
3.48 GB Page-outs
Diagnostics Information: ℹ️
Dec 14, 2014, 11:27:06 PM ajaxserver_2014-12-14-232706_MacBook-Pro.crash
Dec 14, 2014, 11:26:14 PM ajaxserver_2014-12-14-232614_MacBook-Pro.crash
Dec 14, 2014, 11:25:43 PM ajaxserver_2014-12-14-232543_MacBook-Pro.crash
Dec 14, 2014, 11:24:40 PM ajaxserver_2014-12-14-232440_MacBook-Pro.crash
Dec 14, 2014, 11:24:09 PM ajaxserver_2014-12-14-232409_MacBook-Pro.crash
Dec 14, 2014, 11:23:58 PM ajaxserver_2014-12-14-232358_MacBook-Pro.crash
Dec 14, 2014, 01:13:42 AM ajaxserver_2014-12-14-011342_MacBook-Pro.crash
Dec 14, 2014, 01:12:08 AM ajaxserver_2014-12-14-011208_MacBook-Pro.crash
Dec 14, 2014, 01:14:24 AM ajaxserver_2014-12-14-011424_MacBook-Pro.crash
Dec 14, 2014, 11:26:46 PM ajaxserver_2014-12-14-232646_MacBook-Pro.crash
Dec 14, 2014, 11:25:01 PM ajaxserver_2014-12-14-232501_MacBook-Pro.crash
Dec 14, 2014, 11:24:30 PM ajaxserver_2014-12-14-232430_MacBook-Pro.crash
Dec 14, 2014, 01:14:45 AM ajaxserver_2014-12-14-011445_MacBook-Pro.crash
Dec 14, 2014, 01:12:29 AM ajaxserver_2014-12-14-011229_MacBook-Pro.crash
Dec 14, 2014, 01:11:58 AM ajaxserver_2014-12-14-011158_MacBook-Pro.crash
Dec 14, 2014, 11:25:22 PM ajaxserver_2014-12-14-232522_MacBook-Pro.crash
Dec 14, 2014, 11:26:04 PM ajaxserver_2014-12-14-232604_MacBook-Pro.crash
Dec 14, 2014, 11:24:51 PM ajaxserver_2014-12-14-232451_MacBook-Pro.crash
Dec 14, 2014, 01:13:01 AM ajaxserver_2014-12-14-011301_MacBook-Pro.crash
Dec 16, 2014, 02:52:02 PM Quicksilver_2014-12-16-145202_MacBook-Pro.crash
Dec 15, 2014, 02:27:36 PM SourceTree_2014-12-15-142736_MacBook-Pro.crash
Dec 14, 2014, 11:27:17 PM ajaxserver_2014-12-14-232717_MacBook-Pro.crash
Dec 14, 2014, 11:26:56 PM ajaxserver_2014-12-14-232656_MacBook-Pro.crash
Dec 14, 2014, 11:26:25 PM ajaxserver_2014-12-14-232625_MacBook-Pro.crash
Dec 14, 2014, 11:25:53 PM ajaxserver_2014-12-14-232553_MacBook-Pro.crash
Dec 14, 2014, 11:25:32 PM ajaxserver_2014-12-14-232532_MacBook-Pro.crash
Dec 14, 2014, 11:25:11 PM ajaxserver_2014-12-14-232511_MacBook-Pro.crash
Dec 14, 2014, 11:24:19 PM ajaxserver_2014-12-14-232419_MacBook-Pro.crash
Dec 14, 2014, 01:15:17 AM ajaxserver_2014-12-14-011517_MacBook-Pro.crash
Dec 14, 2014, 01:15:06 AM ajaxserver_2014-12-14-011506_MacBook-Pro.crash
Dec 14, 2014, 01:14:56 AM ajaxserver_2014-12-14-011456_MacBook-Pro.crash
Dec 14, 2014, 01:14:35 AM ajaxserver_2014-12-14-011435_MacBook-Pro.crash
Dec 14, 2014, 01:14:14 AM ajaxserver_2014-12-14-011414_MacBook-Pro.crash
Dec 14, 2014, 01:14:03 AM ajaxserver_2014-12-14-011403_MacBook-Pro.crash
Dec 14, 2014, 01:13:53 AM ajaxserver_2014-12-14-011353_MacBook-Pro.crash
Dec 14, 2014, 01:13:22 AM ajaxserver_2014-12-14-011322_MacBook-Pro.crash
Dec 14, 2014, 01:13:11 AM ajaxserver_2014-12-14-011311_MacBook-Pro.crash
Dec 14, 2014, 01:12:50 AM ajaxserver_2014-12-14-011250_MacBook-Pro.crash
Dec 14, 2014, 01:12:40 AM ajaxserver_2014-12-14-011240_MacBook-Pro.crash
Dec 14, 2014, 01:12:19 AM ajaxserver_2014-12-14-011219_MacBook-Pro.crash
Dec 14, 2014, 11:26:35 PM ajaxserver_2014-12-14-232635_MacBook-Pro.crash
Dec 14, 2014, 01:13:32 AM ajaxserver_2014-12-14-011332_MacBook-Pro.crash
Similar Messages
-
Share option for email does not work after Yosemite upgrade.
Hi,
Does anybody know why the share option, "Share via email" does not work anymore after Yosemite upgrade? I love this feature. It's just quick and easy.
Rod.On Yosemite, Pages '09 v4.3 no longer recognizes the Share > Send Via Email categories. You will have to export and manually drag/drop/attach documents to Mail. There is no fix.
-
Thunderbolt Network Adapter not working after yosemite upgrade
After I upgraded to Yosemite, my MBP Retina 13" doesn't see the link on thunderbolt network adapter. The wireless is totally unreliable and freeze every few min for 1-2 min which is long enough to disconnect any sessions. Turn off and on of wireless works and recovers but it's royal pain. Any suggestions?
I scheduled call with Apple 3 times today. They call me back at the scheduled time and immediately tell me that I missed their call even though I pickup on 1st ring. Been waiting in their support queue for more than 30 min now and no one is on line yet.the link provide above leads to http://plugable.com/2014/10/31/os-x-10-10-yosemite-ethernet-adapter-problems-we- can-help
...but these seem to be all 3rd party USB ethernet adapters and nothing to do with the Thunderbolt adapter of the thread - or am I missing something?
I have the same blooming problem, it seems to be totally hit and miss whether the adapter works or not.
I thought is was a faulty adapter, so even bought a second one for my MacBook Pro, so a bit more profit for the most profitable company in the world for a non working device. My ethernet cable works fine to an old apple USB adapter but is 90% useless with Thunderbolt.
Renewing the DHCP lease occasionally works, but totally unreliable, at the moment it fails.
Still looking for a reliable solution.
Come on Apple, please sort this out, you have a connector policy of turning everything you can into adapters and dongles rather than building them in, so you end up with a slim laptop and a bag of adapters to carry around, and then when they don't even work - doubly annoying. -
Mail does not work after yosemite upgrade
I have two iMac desktops, one iMac 27" bought this year and another iMac 24" bought four years ago. I applied the Yosemite upgrade for both they were both running the Maverick with no problem at all), the new one works flawlessly but the old one has one problem with Mail, it won't send emails, it does receive them alright though. I tried using the service provider (Swisscom) repair tool and it says that all emails parameters are correct.
One thing strikes me: Whereas the new iMac received a visible new graphical upgrade of the Mail software (meaning a translucent background and different colors in the left column), the old 24" still has its old looking black and grey background showing that Mail was not (fully?) upgraded. Very frankly I dont care about the graphical upgrade as long as I can use my Mail programme.
Would anyone please help me to recover from this situation please? I do insist on the fact that all parameters of the email accounts are correct and were not changed at all. Thank you.For those of you having email password issues, I'd suggest:
1) Close your mail client (i.e. Apple Mail, Thunderbird, Outlook, etc).
2) Launch "Applications" > "Utilities" > "Keychain Access.app"
3) Select "login" from the sidebar top left area, then select "Passwords" in lower left area
4) Click into the Search box in the upper right and search for your ISPs server names. For example, type "aol" or "google" or "comcast", etc.
5) Look through the search results for password entries related to your SMTP (outgoing) or IMAP/POP (incoming) mail servers. Select them and delete them.
6) Open your email client and try to receive mail, and then to send mail. You should be prompted to enter your mail username and/or password.
Hopefully this might fix issues for those of you using mail clients that use Keychain for credential storage. -
Mail SMTP (outgoing) does not work after Yosemite upgrade
I have just updated Yosemite on my Mac and MacBook Air and the outgoing mails cannot be sent - the SMTP-connection fails.
It worked fully Ok few seconds before the upgrade was started.
So, I wonder if anyone or Apple can help on getting the Outgoing mails to work again.For those of you having email password issues, I'd suggest:
1) Close your mail client (i.e. Apple Mail, Thunderbird, Outlook, etc).
2) Launch "Applications" > "Utilities" > "Keychain Access.app"
3) Select "login" from the sidebar top left area, then select "Passwords" in lower left area
4) Click into the Search box in the upper right and search for your ISPs server names. For example, type "aol" or "google" or "comcast", etc.
5) Look through the search results for password entries related to your SMTP (outgoing) or IMAP/POP (incoming) mail servers. Select them and delete them.
6) Open your email client and try to receive mail, and then to send mail. You should be prompted to enter your mail username and/or password.
Hopefully this might fix issues for those of you using mail clients that use Keychain for credential storage. -
Gmail SMTP outgoing does not work after Yosemite upgrade on MacBook Air
In my MacBook Air:
I quit mail, opened my ~/Library, opened the Mail, V2, MailData, Accounts.plist.
I find the offending mail account, change from <false/> to <true/>
then reopen mail.
But the same issue keeps reoccurring, because the change from <false/> to <true/> is never Saved.
No issues with mail in my iMac desktop.Yeah i think it's a relatively common issue my grandpa has it with both his aol and gmail accounts. i do know that mail issues are at the top of the list for bug fixes on tap for 10.10.1
-
My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.
after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood! -
HT1338 motion 4 will not work after yosemite upgrade
motion 4 will not work after yosemite upgrade
To be honest I do not use motion or any other compositing app so i do not miss it personally. However the new Motion is not that expensive, around $60 i think. Still, I understand your frustration.
I am afraid the more the OS is updated the less compatible certain applications will become.
Good Luck
h -
Most of the default Mac Apps does not work after Mavericks Upgrade
Hi, I did everything, but nothing has brought me out of this misery .
I Updated Maverick just 2 days after its release. Had no problems, other then slow Finder. I restarted my iMac last week, and got caught with these issues, known to me, not sure what all bugs are there.
All these apps does not work: App Store, TextEdit, Preview, Terminal, iBooks, Maps, Calendar, Contacts, Mail, etc
I do not know how to do a clean install, as I had upgraded from Snow Leopord to Mountain Lion and to Maverick using App Store, which does not open at all.
Hoping to get some response soon from Apple support team to help me.Hi Arthur,
Thanks for the headsup about Apple Support thing... My iMac is not under warranty.
And below is the report generated from EtreCheck. Hope it can help me find the solution.
Hardware Information:
iMac (20-inch, Early 2008)
iMac - model: iMac8,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
ATI Radeon HD 2400 - VRAM: 128 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
Startup Items:
FanControlDaemon - Path: /Library/StartupItems/FanControlDaemon
HDDFanControlDaemon - Path: /Library/StartupItems/HDDFanControlDaemon
HP IO - Path: /Library/StartupItems/HP IO
HP Trap Monitor - Path: /Library/StartupItems/HP Trap Monitor
MissingSyncListener - Path: /Library/StartupItems/MissingSyncListener
MySQLCOM - Path: /Library/StartupItems/MySQLCOM
ParallelsDesktopTransporter - Path: /Library/StartupItems/ParallelsDesktopTransporter
VirtualBox - Path: /Library/StartupItems/VirtualBox
System Software:
OS X 10.9 (13A603) - Uptime: 2 days 2:6:45
Disk Information:
WDC WD2500AAJS-40VWA1 disk0 : (250.06 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
My iMac (disk0s2) /: 249.2 GB (22.18 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Western Digital My Book 1110 999.5 GB
WORK (disk1s1) /Volumes/WORK: 375.81 GB (95.66 GB free)
PLEASURE (disk1s2) /Volumes/PLEASURE: 623.69 GB (35.57 GB free)
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.logmein.driver.LogMeInSoundDriver (1.0.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[failed] com.google.GoogleML.plist
[loaded] com.google.keystone.daemon.plist
[not loaded] com.logmein.logmeinserver.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.wdc.WDDMservice.plist
[loaded] com.wdc.WDSmartWareServer.plist
[loaded] rapiback.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.logmein.logmeingui.plist
[not loaded] com.logmein.logmeinguiagent.plist
[not loaded] com.logmein.logmeinguiagentatlogin.plist
[loaded] syncmateStarter.plist
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.ARM.[...].plist
[loaded] com.facebook.videochat.[redacted].plist
[loaded] com.macpaw.CleanMyMac.helperTool.plist
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
[loaded] com.macpaw.CleanMyMac.volumeWatcher.plist
User Login Items:
AirPort Base Station Agent
EarthDesk Engine
LMILaunchAgentFixer
AdobeResourceSynchronizer
RealPlayer Downloader Agent
Windows Phone 7 Connector Agent
iAntiVirus
TextEdit
StatusMenu
HP Scheduler
WDQuickView
3rd Party Preference Panes:
Application Enhancer
DivX
EarthDesk
Fan Control
Flash Player
Flip4Mac WMV
Growl
MacFUSE
WDQuickView
Internet Plug-ins:
AdobeExManDetect.plugin
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Default Browser.plugin
DirectorShockwave.plugin
DivXBrowserPlugin.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
User Internet Plug-ins:
Picasa.plugin
Unity Web Player.plugin
WebEx.plugin
WebEx64.plugin
Bad Fonts:
None
Time Machine:
Time Machine not configured!
Top Processes by CPU:
29% mds
2% WindowServer
1% mds_stores
1% LogMeInGUI
1% RealPlayer Downloader Agent
1% EtreCheck
1% FanControlDaemon
0% uTorrent
0% notifyd
0% networkd
Top Processes by Memory:
1.00 GB mds
106 MB mds_stores
78 MB Google Chrome
49 MB Finder
45 MB WindowServer
40 MB Google Chrome Helper
37 MB VLC
29 MB uTorrent
20 MB EtreCheck
16 MB DashboardClient
Virtual Memory Statistics:
43 MB Free RAM
989 MB Active RAM
934 MB Inactive RAM
447 MB Wired RAM
4.25 GB Page-ins
454 MB Page-outs -
Insert in Tabular form does not work after the upgrade to APEX 4.0
Hi all,
Thx in advance for looking into the issue.
We are running into following issue when we upgraded APEX 3.2 to APEX 4.02
1) The Tabular form insert does not work.
2) We are fatching the value of the Global variable APEX_APPLICATION.g_XXXX in a procedure and we get null for this value after submit for new row to be inserted.
The tabular form was working fine in APEX 3.2.
The Update and Delete works just fine.
Any help in this regard is highly appreciated.
Thx and regards,
MaheshHere is my workaround to get the ADDROW/SUBMIT working again if you have a legacy Tabular Form:
1 PAGE ATTRIBUTES
JAVASCRIPT
FUNCTION AND GLOBAL VARIABLE DECLARATION
var htmldb_delete_message='"DELETE_CONFIRM_MSG"';
2 DELETE BUTTON
ACTION WHEN BUTTON CLICKED
URL Target change to
javascript:apex.confirm(htmldb_delete_message,'MULTI_ROW_DELETE');
3 ADDROW BUTTON
ACTION WHEN BUTTON CLICKED
Action
redirect to URL
URL Target
javascript:addRow();
4 PROCESS
APPLYMRU (activitated by button ADDROW)
CONDITION
never or delete
5 PROCESS
ADDROWS
CONDITION
never or delete
6 CHANGE PAGE TEMPLATE to e.g. THEME 13 One Level Tabs.
7 IF YOU WANT ADD FUNCTIONALITY TO GOTO BOTTOM OF PAGE AFTER ADDROW
1. In the page footer put <a name="bottom_of_page"></a>
2. Amend the action when the "ADD" button is clicked to scroll down to the new region by doing the following:
- edit "ADD" button
- Go to "Action when button Clicked" section
- Amend "URL Target" from
javascript:addRow();
to
javascript:addRow();window.location='#bottom_of_page' ;
regards
PaulP -
Wrt610n wireless network does not work after firmeware upgrade
Hi
I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan. Any suggestions? maybe the firmware tosted the router?
Regards
StefanUpdate -
After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
Any thought what is going on - could it be that the other firmware had not loaded compleytle or? -
RAID Utility does not work after Vista upgrade
Hi,
I have a Qosmio G30 with 2 HD 120GB each. After I upgraded to Windows Vista from Windows XP, the Toshiba RAID Utility does not work anymore. In WXp it worked OK, but in Vista there is no way I can mirror the HD. That is, the utility itself work, but the button that should say Mirror, or something like that is not shown. I have set the drives to RAID-1 in the BIOS, but no go.
Is there any way to get the software RAID to work again?Hi,
just a little question: While installing vista, did you installed the RAID-driver at installation time? Maybe this could be the reason why RAID cannot be activated properly.
Please give some feedback, if you installed the RAID drivers for Vista during the installation..
Cheers -
Iphoto slideshow does not work after SL upgrade
Hi, i have a 2 month old macbook pro 3.06Ghz and after i upgraded to SL i have several problems: Toast does not work, my pretty new HP 4480 Photosmart Printer works but the scanner function not (error message comes up no connection to scanner), etc. but the biggest problem right now is that iPhoto does not work anymore. i use it a lot and i have over 20000 photos on it. before with leopard it was working fine, but now after scrolling through a few photos iphoto get stucked for a few minutes before it runs again. the slideshow feature doesn't work. i read a few forums about this or similar problems but all the advise didn't help. i reinstalled the iphoto from the original computer disc and later from a life 9 disc as well. first the slideshow works once or twice with only a few pics, but later it turns the slideshow on but get stucked and the only way to get out of the frozen screen is by turning the computer off (holding OFF button down). i did also verify disc permission and disc repair = no help. what can i do?
after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood! -
Dvd player does not work after Leopard upgrade
I installed Leopard, had to upgrade because my printer died and no printers now work with Tiger. Since the upgrade, my DVD player does not work. I have problems burning some cd's too. Is this a known issue? What is the fix?
I have read a couple of complaints like that, but not sure it's widespread.
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
If that does NOT help, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
If that does NOT help then I suspect the optical drive or media itself, or possibly just needs a cleaning CD run on it. -
Some Widget does not work after latest upgrade
Today is July 23rd, 2011. By recent latest upgrade, mainly for supporting Lion, where I am still using Snow Leopard 10.6.8, some widget does not work, including Battery Meter, Digital Clock Alarm, Victoria Digital Clock, etc.
By the way, my company use Chatter and I installed Chatter Desktop. Again, after recent upgrade, it no longer work anymore.
Do you experience the same problem?
For those who has upgraded to Lion, do you also find some widget does not work?I have read a couple of complaints like that, but not sure it's widespread.
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
If that does NOT help, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
If that does NOT help then I suspect the optical drive or media itself, or possibly just needs a cleaning CD run on it.
Maybe you are looking for
-
Hi Gurus, I have created report ZTEPCA12 with report writer .When i check the syntex i am getting the error. The key figure cell ZTEPCA12 has not yet been defined Message no. GR687 Can any one please tell me where do i need to define this. Thank
-
Basic, basic question - how to order prints from more than one album at onc
I am having two problems with iphoto - I would be most grateful for any help. First, when I go to upload my photos to a web-based printing company (like shutterfly or snapfish), and I click on the vendor's "browse" photos to find the album to upload,
-
BI 7.0 - Error while loading data from R3 to PSA
Hi, I transported Master Data ATTR/TEXT object from DEV to QA (BI 7.0 NW 2004s); and getting the following error while loading the data from R3 in to PSA using the InfoPackage. Any clue to resolve this issue is appreciated. Monitor - STATUS tab: Erro
-
Problem with custom UINavigationItem
Hello, when I pass animated:NO to UINavigationController pushViewController, my custom navigation item (setup in my nib) doesn't show up. I'm trying to do a flip animation as follows: MyController* ctrl = [[MyController alloc] initWithNibName:@"MyNib
-
ORA-04091:table XYZ is mutating,trigger/function may not see it ORA-06512
Hi everybody i am facing mutating problem during data deletion fron XYZ table as ORA-04091:table XYZ is mutating,trigger/function may not see it ORA-06512 at "user.procdure_name",line 39 ORA-065 i have table XYZ and have database trigger on this tabl