Thunderbolt connection to projector doesnt work: only part of the screen is projected. Solution??

When I hook up my air to a LCD screen only part of the image on the air is projected. Solution anyone?

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new.
If you've gone through ALL the troubleshooting steps and you're still having the problem, then you most likely have a hardware issue and will need to bring your phone to Apple for evaluation.

Similar Messages

  • Portege 3500 stylus not working in parts of the screen

    my stylus on my portege isn't working in parts of the screen the parts change and are sometimes not there.
    This happened after replacing the screen but not straight away.

    Hello
    I agree with previous user and also believe that there must be some hardware problem and it must be checked properly.
    Contact service again and explain them what happen exactly. Sorry but I dont believe you can do anything alone.

  • Scrolling only part of the screen

    Hi,
    I have the following problem.
    1. I created a JFrame, that fills the whole screen.
    2. The frame contains two JPanels.
    Now for the problem:
    I want the top panel to hold a JPEG that is much bigger than itself, so it should contain a JScrollPane or a JViewport, because I want it to be scrollable. It seems, that I only can change the viewport, that the image scrolls downwards. For some reason the area doesn't even react when I try to change the position of the image, so that I can view the part of it that is outside of the panel. Is there anything I can do ?
    To better visualize the problem :
    Do you know the computer game civilization ? The bottom part of the screen holds menues. The uppermost part is a scrollable map. I want to create something similar.

    maybe you need a JSplitPane, split the frame into upper-lower two parts. The upper part holds the JScrollPane for the image panel, the lower part holds the second panel

  • Can anyone tell me why my various Mice seem to work only part of the time..

    Hello All...
    I'm having some trouble with my new MacBook(s). I have two different Mice (one wired... one wireless) all via USB and they work only "sometimes"...
    When they do work (about 1 in 12 times) they stop after the computer goes to sleep... when I wake everything up... the mice do not respond...
    Strange...
    Hopefully this is simple to fix/modify...
    Thanks...
    mls
    [email protected]
    www.av123.com
    MacBook   Mac OS X (10.4.7)  

    Welcome to
    the discussions!
    Which mice are you having trouble with?
    Hi Eric... thanks for your reply...
    I have a SONY Vaio mouse PCGA-UMS3 and a Logitech Wireless mouse... (sorry no model number here with me at the moment)...
    Both of these work perfectly with ALL of my PowerBook G4's... (I have 5 of these in various locations...)...
    I'm really baffled by this... They just do not work --- or work for short intervals only... very odd...
    I'd love to hear any ideas here...
    With humble thanks...
    mls

  • My iPod touch 4th generation's screen is part white but,my iPod still works but I can see only part of the screen.Does this mean part of my screen is broken? Or is there a way to easily fix this? If so please tell me how to fix it.

    I need help on knowing how to fix my iPod touch's screen.

    Apple will exchange your iPod for a refurbished one for &199 for 64 GB 4G and $99 for the other 4Gs.. They do not fix yours.
    Apple - iPod Repair price              
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit

  • TS2755 My iMessages on iPad 2 work only part of the time .

    My iMessages works intermittently. It work fine for days, then has a few hours where it will not deliver messages. I have a wifi connection, not phone connection. My husband's iPhone works fine using the same wifi network whirl I am having trouble. I have tried resetting, turning wifi on and off, reconfiguring the network connection, a full restore, turning off iMessages and on again, etc. nothing fixes it. It will suddenly start working again, usually late at night. Ideas?

    Welcome to
    the discussions!
    Which mice are you having trouble with?
    Hi Eric... thanks for your reply...
    I have a SONY Vaio mouse PCGA-UMS3 and a Logitech Wireless mouse... (sorry no model number here with me at the moment)...
    Both of these work perfectly with ALL of my PowerBook G4's... (I have 5 of these in various locations...)...
    I'm really baffled by this... They just do not work --- or work for short intervals only... very odd...
    I'd love to hear any ideas here...
    With humble thanks...
    mls

  • I just updated my iphone 4S to ios 8.1; when I try to text only part of the screen rotates

    I just updated my work iphone 4s to iOS 8.1 and now find that I can't successfully text in lanscape. the dialog box rotates, the  keyboard opens, but is obstructed by the signal strength inidicator and is basically unusable since it closes the dialog if you try to type with any letters along the far left of the keyboard, the text history remains in Protrait orientation. any suggestions?

    Have you tried Settings > General > Reset > Reset All Settings?

  • Each time I open Firefox, a previously visted website is open at the left side behind the home page, so the my home page is only partly filling the screen.

    The "Sam's Club" website with my user ID and "remember me" box checked is the one that opens behind my homepage. This happens every time I open Firefox, but did not happen before I set up the Sam's Club sign in page.

    Could you check whether you have dual homepages?
    orange Firefox button ''or'' classic Tools menu > Options > General
    If you see more than one URL in the Home Page box, delete the extra one and the vertical bar that separates them.
    More info: [https://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page How to set the home page | How to | Firefox Help].
    Any luck?
    Edit: if the page appears in the sidebar, which also can be used to display bookmarks (Ctrl+b) or history (Ctrl+h), then it probably is caused by something other than your home page setting.

  • HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

    Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
    <E-mail Edited by Host>

    It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
    I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
    So what to do, what to do.
    Well there is hope for you as long as the drive wasn't Filevaulted.
    I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
    When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
    Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
    The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
    It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
    So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
    The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
    So what you will have to do is this:
    Create a data recovery/undelete external boot drive
    or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

  • On my work pc only, I cannot click on links in the upper part of the screen while using firefox. This "dead area" affects only about the top 20% of the page, while below that I can click on all links.

    This does not happen on my laptop computer or on any other program my work computer runs.

    That problem can be caused by the Yahoo! Toolbar or the Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode

  • After upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to co

    after upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to correct it?  thank you

    Hello pichastos,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your camera is displaying a black screen, please follow the information outlined below.
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping  (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
    Take care,
    Alex H.

  • Display only part of the STRING field, but search ALL field

    Hi all,
    I have a field VARCHAR2(4000) that holds a lot of text.
    When I make a report in APEX, it shows in each row, ALL text, so the report is very "ugly".
    I want to limit the display of that column for only the first 60 characters.
    I tried to use the SUBSTR function, that worked, but the search option will search for the text only in that 60 lenght characters, and will now search in the rest (not displayed) part of the field.
    Is there a way to do this full search and display only part of the field?
    Thanks

    You can have the 'substring' column displayed to the user, but have another column which shows the full text lets say it has an ALIAS of "*SEARCH_LARGE_TEXT*" in the report definition(and is among the displayed columns).
    You can hide the large text column(SEARCH_LARGE_TEXT) using JS as
    $('th[id="SEARCH_LARGE_TEXT"],TD[headers^="SEARCH_LARGE_TEXT"]').hide()
    Note: ^= syntax used to match data column even when break formatting used
    You can make sure that the column stays hidden even after an IR filter or refresh by binding it to the refresh event of the IR by
    $('#apexir_WORKSHEET_REGION').bind('apexafterrefresh', function(){ 
      $('th[id="SEARCH_LARGE_TEXT"],TD[headers^="SEARCH_LARGE_TEXT"]').hide()
    change the string "SEARCH_LARGE_TEXT" with your column's alias
    Hope it helps

  • Exporting only part of the Sequence

    I do not have any in and out points on my sequence, but when I export, only part of the sequence exports. I have chosen numerous encoding presets, tried placing in and out points at the beginning and end, but it still does not work.

    I've tried exporting through DV NTSC and DVCPRO720p60.
    Say if I had a 10 minute sequence, then it'd only export 3/4th of it.

  • Swipe for Keyboard doesnt work. Dont spend the 1.99!

    Swipe for Keyboard doesnt work. Dont spend the 1.99!

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up              
    Restore to factory settings/new iPod

  • Hone turned off . i tried several times to turn it on but i doesnt work even by using the power and the home button. what should i do ?

    ive got the iphone 5s 4 weeks ago.today the screen turned blue and the phone turned off . i tried several times to turn it on but i doesnt work even by using the power and the home button. what should i do ?

    Hi vanessato,
    Thanks for visiting Apple Support Communities.
    I recommend these troubleshooting steps if your iPhone does not turn on.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Best,
    Jeremy

Maybe you are looking for