Thunderbolt cursor alignment problem anyone?

Today I just got a Thunderbolt screen and set up my new Macbook pro with it, and it seemed to be working great until I was using the clone stamp and the brush was out of alignment. This problem persists even despite uninstalling PS and reinstalling it, even without my previous preferences. The technicians I spoke to at Adobe didn't have a clue -- and wasted a lot of my time. I've read of many people having this problem, but no one has posted the solution yet. I can't believe photographers out there with Macs are putting up with this. I can't be the only one who has gotten this new screen. Anyone have any information?

I just spoke to Apple over here in France, and they say it's a compatibility problem with third-party software, and therefore up to Adobe to fix it. Nothing I could say could change that axiom, but in the end they did ask me to provide screen shots, articles and so on for their engineers to look at. This will take at least two weeks. In the meantime, I've got to just go back to using the Eizo screen that I've had for years. It's not so big and shiny, but at least it works. Thunderbolt is a big disappointment.
As far as I can tell so far, btw, this problem happens on the Thunderbolt screen, but not on the macbook screen, even for the same image at the same time. The brush diameter at which it occurs (ie at which the place where the pointer points is offset from where it will hit when you click) is smaller with a small image, and bigger with big ones. Please let me know if you'd like any further information -- perhaps to fix it on your end -- or to get Apple to fix it on theirs.

Similar Messages

Same alignment problem! can ANYONE help??

Hi guys i still need help with my alignment problem! My nav
bar lokos good in the preview window of fireworks
CLICK
HERE TO VIEW THE NAV BAR IN FIREWORKS
but when previewed in a browser or exported into dreamweaver,
the navbar is all out of order
CLICK
HERE TO VIEW THE NAV BAR IN DREAMWEAVER
Can anyone tell me what is going on?? i really need to launch
the website ASAP.
Thankyou!

10totti wrote:
> Hi guys i still need help with my alignment problem! My
nav bar lokos good in
> the preview window of fireworks
>
>
http://img97.imageshack.us/my.php?image=nav1yp1.jpg
I hate being harassed by ads and will not review images on
the image
shack site any longer. Post the screen shot or original file
to your
personal site.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
Design Aid Kits:
http://www.webdevbiz.com/pwf/index.cfm

Spot healing brush alignment problem

Using Photoshop CS4 (11.0) on a Mac with 10.5.6. Sometimes the spot healing brush works as expected. However, after working for a while, the alignment seems to be off--I hover the cursor over the spot I want to retouch, but when I click the mouse the area retouched is a bit (1/4" or so) below the spot healing brush cursor. If I quite and restart Pshop the problem goes away. This is with the spot healing brush--not the one where you need to select where to clone from. Is something wrong, or is there a new feature I don't know about that's causing this? I've used the spot healing brush quite a bit with CS3.
If anyone has any thoughts, I'd appreciate hearing them. This is getting frustrating.

I think you are talking about a different issue here. This problem is not specific to the spot healing brush.
@ OP: The brush alignment problem is very real and I have it frequently when working with larger files (approximately >500MB in memory). I have two macs, a macbook (GMA X3100) and a mac pro (ATI Radeon HD 2600 XT). So two completely different hardware arrangements that have the exact same problem.This is clearly not a problem with graphics cards.
Drawing with any tool like: brush (any brush - dodge/burn, blur, eraser etc.), lasso (any lasso), line, crop tool etc. will result in a misalignment of about 0,5 cm directly downward. However, clicking on menus and dialogue boxes works as expected. Switching off OpenGL features in PS WILL NOT PREVENT THE PROBLEM (if I shout, maybe Adobe will hear...). The same problem appears whether I'm using a Wacom tablet or a mouse. It even appears when the Wacom driver is uninstalled.
So, if Adobe is not acknowledging the problem it's safe to assume it will be featured in CS5 as well.
@ Jim: Sorry, I would have posted in the other thread but your link does not work anymore.

Alignment problem on abap report after Unicode conversion

Hi,
I've recently convert my system to unicode. Now my user is complaining the aged debtor report (ABAP) is having a column alignment problem when displaying the Japanese character.
I'm not sure what to do now. Have anyone experience this and let me know how can I sove the problem?
/Eida

Hi,
you need to regenerate the data
For this regeneration, you start the program RKETREGP with the parameter
application class 'KK', subclass '01' and table name 'KKROBJ'.
br, Guido

Alignment problem in converting smartform printpreview into PDF

Hi all,
I am getting some alignment problem in converting smartform printpreview into PDF format, i.e the format of PDF is different from printpreviw of smartform.
kindly suggest something so that alignment is not changed while converting to PDF.
Regards,
Sumalatha

use below f.m to convert it into 255 characters....
     CALL FUNCTION 'QCE1_CONVERT'
        TABLES
          t_source_tab         = i_tline
          t_target_tab         = so_ali[]
        EXCEPTIONS
          convert_not_possible = 1
          OTHERS               = 2.

Having a image alignment problem using clearbox

Hi,
I'm having an image alignment problem. I cannot figure it out. I'm using the clearbox - lightbox dreamweaver widget. Using Dreamweaver CS6.
Actual page located here. Any help would be appreciated.
http://dirtysouthink.com/gallery/dustin2.html

This has very little to do with Dreamweaver. DW is merely a tool to assist you in building a web site. It is purely a matter of styling (CSS).
When I look at the structure, I see
BODY-CONTENT (width: 490px)
     GALLERY (width: 452px)
          CONTAINER (width: 500px)
               ITEM (width: 150px)
From this I can deduce that:
GALLERY will fit inside BODY-CONTENT
CONTAINER will NOT fit inside GALLERY or BODY-CONTENT
ITEM will fit three times into CONTAINER
To start with, I would reduce the size of the CONTAINER so that it fits inside of its parent. Then I would adjust the width of the ITEM so that only two of them fit inside of the CONTAINER.

Getting ORA-01000 : maximum open cursors exceeded problem

I am getting ORA-01000 : maximum open cursors exceeded problem in my piece of java code when the
load is high .Open cursors is set to 1000 still getting the same problem .
Basically i have to select some rows from a table which i am doing in A() function and process it and insert into
another table which i do it in another function B() there is a update statement also in this fun.
There is a particular business logic for which i need to call B() from the A() function
which happens to be in the select result set like below
A()
query ="Select * from temp";
while(rs.next)
B();
All the result sets are properly being closed that too in finally block.
I dont see any other problem with code .Still I am gettin this cursor problem.
Is some thing wrong with the design like calling a
insert from a result set while loop or the update statement

The code below is deleting fine. Check your $id is valid. I wonder if ADOdb has some quirks with binding and variable creation/destruction, similar to #1 in http://www.oracle.com/technology/tech/php/htdocs/php_troubleshooting_faq.html#bindvars
<?php
See ADOdb Tutorial for Oracle: http://phplens.com/lens/adodb/docs-oracle.htm
drop table mytab;
create table mytab (city varchar2(20), country_id varchar2(20));
insert into mytab values ('SF', 'US');
insert into mytab values ('Sydney', 'AU');
insert into mytab values ('London', 'UK');
commit;
require_once("/home/cjones/public_html/php/adodb5/adodb.inc.php");
$db = ADONewConnection("oci8");
$db->Connect("//localhost/XE", "hr", "hrpwd");
echo "Before:\n";
$rs = $db->Execute("select city from mytab");
while ($arr = $rs->FetchRow()) {
    echo $arr['CITY'] . "\n";
$s = $db->Prepare("delete from mytab where country_id = :ci");
$db->Parameter($s, $ci, 'ci');
foreach (array('US', 'AU') as $ci) {
     $db->Execute($s);
echo "After:\n";
$rs = $db->Execute("select city from mytab");
while ($arr = $rs->FetchRow()) {
    echo $arr['CITY'] . "\n";
?>There's another sample in the ADOdb OCI8 driver:
          Usage:
               $stmt = $DB->Prepare("insert into table (col0, col1, col2) values (:0, :1, :2)");
               $DB->Bind($stmt, $p1);
               $DB->Bind($stmt, $p2);
               $DB->Bind($stmt, $p3);
               for ($i = 0; $i < $max; $i++) {
                    $p1 = ?; $p2 = ?; $p3 = ?;
                    $DB->Execute($stmt);
               }For queries I know this works. I haven't seen any examples that prepare once.
$rs = $db->Execute("select city from mytab where country_id = :ci", array('ci' => 'UK'));
while ($arr = $rs->FetchRow()) {
    echo $arr['CITY'] . "<br>\n";
}

Banner Alignment Problem

I am having an alignment issue with a website that I recently built using dreamweaver.
http://bacs.myweb.uga.edu
There is not an alignment problem on the front page (index.html), but subsequent pages (http://bacs.myweb.uga.edu/currentstudents.html) change the alignment of the banners below the tabs for each section. Screen resolutions of 1280X800 do not have any alignment issues, but pretty much any other resolution changes the alignment. Is there a solution to this problem? Rather than posting all the code, you should be able to get it from the links above. Thanks in advance.
Frustrated in Athens,
Aldo

html
<body>
<div id="wrapper">
</div>
</body>
css
#wrapper {
width: /*the width of your content */
margin:0 auto; /*this will centre align it*/
padding:0;

Paper Alignment problems!

I have a HP F4280 all in one printer, just recently when doing any type of printing, everything is printed but comes off alignment, that is not straight on the page. How can I fix this paper alignment problem? I've had this printer for 2 years now and just recently the alignment is off, I haven't done anything different!

The troubleshooting page here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

WHEN or HOW to fix the problem with Thunderbolt/Side screen problems

WHEN or HOW to fix the problem with Thunderbolt/Side screen problems (Cinema screen). Keeps blinking on & off then eventually completely off. Would have thought Apple would have fixed the problem by now as it is apparently to do with the Thunderbolt connector!.

Hello, might it be Video card related?
See if yours is on the recall list...
iMac (27in): AMD Radeon 6970M Video Card Replacement Program (del 'mid 2011')
http://xlr8yourmac.com/
http://support.apple.com/kb/TS5167?

Can I fix the alignment problems my Color LaserJet CP1518ni is having? The red does not line up.

Can I fix the alignment problems my Color LaserJet CP1518ni is having? The red does not line up. I have installed the latest updates, etc. Calibrating does not help. The printer is only a few years old. What gives?
This question was solved.
View Solution.

Please be aware that this forum is a peer to peer support forum, it is not a direct link to HP support.
I have a similar issue with a Laserjet cp1525nw, it was mostly corrected by removing and reseating the toner cartridges.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Alignment problems in JSF datatable

Hi,
In my JSF data-table, i have few alignment problems.
For Example, I have 4 columns, Emp-Id, First-Name,Last-name and Age.
What happens is, sometimes, the value in the First-Name cell moves into the Last-Name cell, leadiing to alignment problems. But this is not happening always. Occasionlly this happens.
I tried with iFrames and also by having fixed width for each cell, then also this problem is persisting.
Is it something to do with the datatable display in JSF?
Any suggestions/ideas on how to resolve this problem would be of immense help.
Thanks

Hi
What happens if you delete the text and retype in and change alignment ?
Does the same issue happens with all sub menu items ?
Please provide the site url.
Thanks,
Sanjit

I have purchased Mountain Lion to correct the gray cursor square problem, and I cannot get Mountain lion to download

I purchased Mountain Lion from 10.7.5 on my Imac to correct the gray cursor square problem, now Mountain Lion will not fully download. Any recommendations?

Upgrading to a newer OS X does not often correct pre existing problems. MIght be a disk space issue, or the startup disk needs repairing.
Make sure there's enough free space on the startup disk.
Control click the MacintoshHD icon on your Desktop then click Get Info.
In the Get Info pane you will see: Capacity & Available
Make sure there's at least 15% available disk space.
For the gray cursor issuee, startup your Mac in Safe Mode
A Safe Mode boot takes longer then a normal boot so be patient. Once you are in Safe Mode, click Restart from the Apple menu.
If that didn't help the cursor issue, launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk
If Disk Utility reports errors, since v10.7 Lion is the currently installed OS, restart your Mac while holding down the Command + R keys so you can access OS X: About OS X Recovery.
From there you can access the built in utilities to repair the startup disk.
message edited by: cs

Keynote 9 and objects alignment problems

Why keynote does not align object using the first one selected as stated in the user guide?
It will rather use the highest one for top, the lowest one for bottom and a ponderate value for all objects for middle.
Same problem for left center right.
If I do align top with an order like (1 being the 1st selected, 2 the 2nd and 3 the 3rd).
     2                                             1     2          3
1                       I end up with                              Rather than 1     2          3
               3
If I do align top with
     3                                             2     3          1
2                      I end up with                               Rather than
               1                                                                                      2     3          1
Can this be changed somewhere?
This is just not logical at all. The first object should be the reference for the alignment.
There also is a problem with distribution, it uses the farthest left and the farthest right in Horizontal distribution rather
than first and last selected.
This is against the documentation.
Cheers.
Joffrey.

Hello.
Thanks for your reply. Indeed, these alignment guides are a powerful and great tool that I use all the time.
Nevertheless when it comes to aligning a big amount of shapes, I can't be bothered doing it one by one.
In the manual of Keynote 09' it is written page 89 and 90:
Quickly Aligning Objects Relative to One Another
You can use menu commands to quickly move objects on the same slide in alignment or space them equally apart. First, you must select all the objects you want to align (hold down the Shift or Command key as you click each object to select it).
To align selected objects:
m    To align the objects with each other, choose Arrange > Align Objects and then choose one of the alignment options in the submenu.
Left: Positions objects so that their left edges align vertically to the first object you select.
Center: Positions objects so that their centers align vertically to the first object you select.
Right: Positions objects so that their right edges align vertically to the first object you select.
Top: Positions objects so that their top edges align horizontally to the first object you select.
Middle: Moves objects vertically so that their centers align horizontally to the first object you select.
Bottom: Positions objects so that their bottom edges align horizontally to the first object you select.
There is a discrepency between the manual and what Keynote actually does.
I know there are lots of way to circumvent this alignment problem, I would just want to know if there is a place, in a config file, may be where this can be switch from topper to first one for example in case of an align top.
Any other tools such as Omnigrafle, Axure, Visio, Adobe suites, you name it, do it using the first selected object. I whish Keynote would act as expected.

Another weird Icebook cursor-freeze problem

I recently asked about a full cursor-lockup problem here:
http://discussions.apple.com/thread.jspa?threadID=440688
Problems started after updating this machine to OS 10.3.9.
Anyway, I've been able to improve matters to when the cursor freezes, I can
unlock it by unplugging the phone line to the (internal) modem. Only locks up when I'm online (dialup). Weird, huh? And down to nuisance level, though I'd still like to cure it.
Details: 2002 Icebook G3/600 running OS 10.3.9
Ran fsck, repaired permissions, cleaned & reseated RAM (tests
OK with Memtest)
Any other ideas?
TIA & Cheers -- Pete Tillman
"There is no known substitute for scrith."
--Dr. John Stockton, rass
Icebook Mac OS X (10.3.9) 384 MB RAM

I've had that problem since I purchased my MacBook about 2 years ago. I've even flatten and installed new OSs over this time, no change. The behavior I have is the cursor sticking after just about any input which requires the computer to do some processing (ie: copying and pasting text, performing edits a photo, renaming a folder, etc...). It's very distracting when you're working hard on a document or drawing and constantly waiting for the cursor to unstick. Believe it or not, I've actually gotten used to it. Good news is, I'm buying a MacBook Pro soon, and giving this computer to my wife. I'll freak if the new Pros do it too. No......!
--Robb

Thunderbolt cursor alignment problem anyone?

Similar Messages

Maybe you are looking for