Thunderbolt Display + MacBook Pro w/out a Thunderbolt port?

I have a 2009 MacBook Pro (MB990LL/A) without a Thunderbolt port and a new Apple Thunderbolt Display (27-inch).  Is there any way to make these devices compatible? Would the Apple Thunderbolt to FireWire Adapter work?
Thank you

Have found this that i think should help you.
Using the Apple Thunderbolt Display:
What are the system requirements for using my Apple Thunderbolt Display in OS X?
What are the system requirements for using my Apple Thunderbolt Display in Boot Camp?
How many Apple Thunderbolt Displays can I use with my Mac in OS X?
How many Apple Thunderbolt Displays can I use with Mac in Windows 7 or 8 with Boot Camp?
Can I connect a Mini DisplayPort display to my Apple Thunderbolt Display for computers that support using more than one display?
Can I use an Apple Thunderbolt Display and an iMac in Target Display Mode to act as two additional displays for my Thunderbolt-equipped Mac?

Similar Messages

  • 3 thunderbolt Display macbook pro

    Hello,
    how can i put three thunderblot displays on a macbook Pro.
    how helps ?

    Connection options for ThunderBolt Macs: Connecting to your Apple Thunderbolt Display (27-inch)
    Stefan

  • How to connect my old 20in Cinema Display to my thunderbolt new MacBook Pro?

    Hi everyone, I just brought a new MacBook Pro to replace a older model(brought earlier 2010), and a new thunderbolt Cinema Display. I have a old 20 inch LCD Cinema Display all the way from 2005 and brought a mini display port for my old MacBook Pro, worked just fine. However with the new Thunderbolt Display, I noticed there's another thunderbolt port behind and was thinking to connect my old Cinema Display as a secondary monitor. I've brought a thunderbolt port from amazon (http://www.amazon.com/dp/B007KB0EGC/ref=pe_175190_21431760_M3T1_ST1_dp_1 ), but my old monitor still shows black. What did I do wrong here? Thanks!

    So currently there are two displays and you expect there to be three?
    Can you swap the displays just to make sure there is nothing else wrong?
    That is confirm:
    1) MBP -> Display A works
    2) MBP -> Display B works
    Then try:
    MBP +-> Display A
        |
        +-> Display B

  • HT5219 When I connect my MacBook Pro to a TV (Thunderbolt to HDMI) no display is recognized and I am unable to mirror.  I have a 2.9 GHz Intel Core i7 with 8GB 1600 MHz DDR3 running OSX v 10.8.3.

    When I connect my MacBook Pro to a TV (Thunderbolt to HDMI) no display is recognized and I am unable to mirror.  I have a 2.9 GHz Intel Core i7 with 8GB 1600 MHz DDR3 running OSX v 10.8.3.

    You are being scammed. Please ignore and close. Do not click any links or call any phone numbers!
    Remove Browser Pop-up Problems
         AdwareMedic
         Adblock Plus 1.8.9
         remove adware that displays pop-up ads and graphics on your Mac

  • How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.

    How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.
    Could it be a borked cable ? I just bought it new from the store today, i have updated both imac and macbook pro to latest thunderbolt firmware and updates. Both 10.7.3.
    MacBook Pro:
      Vendor Name:    Apple, Inc.
      Device Name:    MacBook Pro
      UID:    0x0001000A17016E60
      Firmware Version:    22,1
      Port:
      Status:    No devices connected
      Link Status:    7
      Port Micro Firmware Version:    FFFF.FF.FF

    You are correct, here is what Apple Says:
    http://support.apple.com/kb/TS3775
    I was able to find these instructions, however they referr to 2009-2011 27" iMacs. I think it's the same, if it's not then contact Apple directly for instructions. If either of the machines is less than 90 days old or covered by AppleCare then call AppleCare tomorrow for help, they should be able to easily answer this for you. You will find the number in your manual or you can use the AppleCare Contact Info link.
    Your iMac should automatically recognize the presence of a digital video signal at the Mini DisplayPort and enter Target Display Mode.
    If your iMac does not automatically enter Target Display Mode, press command + F2 to manually enter Target Display Mode.

  • Can I connect my thunderbolt display's power cable to supply power to the new retina display macbook pro?

    I'm planning to buy a new retina display macbook pro, but I have a thunderbolt display and I use the display's power cable to supply the power to a macbook air. As the power connector on the new macbook pro is differet, It looks to me that I won't be able to connect it to the new computer. I'm I correct?

    You'll just need this adapter, which you can buy or order with the computer:
    http://store.apple.com/us/product/MD504ZM/A?fnode=MTY1NDEwMQ&s=topSellers

  • Brand new 15" MacBook Pro Retina - unplugged from Thunderbolt Display and Keyboards today find keyboard alpha-numerics not working; except the function keys, delete key, tab key, command/ctrl/shift/alt/fn and arrow keys; and 7/8/9/u/o/j/l nudge cursor

    Brand new 15" MacBook Pro Retina - unplugged from Thunderbolt Display and Keyboards today find keyboard alpha-numerics not working; except the function keys, delete key, tab key, command/ctrl/shift/alt/fn and arrow keys; and 7/8/9/u/o/j/l produce cursor nudges.

    It's a new machine - and the Thunderbolt Display is meant to work with it. You need to just make an appointment at your local Apple Store and have them fix whatever is wrong.
    If you like, you could always try a SMC reset and a PRAM/NVRAM reset to see if either of those will get your keyboard back in working order...
    Clinton

  • I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

    I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

    Will not work.  To my knowledge, dual converting like that isn't supported.  The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

  • Which the best adapter vga to plug a data show on a macbook pro, mini displayport or thunderbolt?

    which the best adapter vga to plug a data show on a macbook pro, mini displayport or thunderbolt?
    Why?
    Thanks pals.

    Use the Apple Cable Chooser:
    http://store.apple.com/us/browse/home/shop_mac/mac_accessories/cables/cable_choo ser

  • Thunderbolt Display & Mac Pro

    Can I connect a Thunderbolt Display To the MacPro?

    The ThunderBolt display requires a Mac that was made with a ThunderBolt port.
    The Mac Pro 65lb tower is not currently a member of that club.
    It will not work, and there is no known way to make it work.

  • My brand new 13 inch retina display macbook pro won't turn on!?

    Hello all,
    I purchased a 13inch retina display macbook pro from an apple store at around 4pm today and at about 10pm (after I have been doing nothing more than downloading software and surfing the internet off of the power adapter) it randomly shut off as I was reading from my pdf math text book. I assumed it had died so I plugged it in and tried to turn it back on it turned right back on and went to the login screen. I barely had enough time to look and see that my laptop was at 40% power and charging before it shut off again and refused to turn back on. It does not respond in any way to the power button (visual or fans whirring etc.) and I currently have it charging up on my bed. It acknowledges the charger (going from a brief green light to the amber) and I have tried resetting the SMC multiple times by now. When I do so the light turns green for a moment and then returns to amber.
    I am beyond furious, school starts tomorrow and I was really hoping my first personal laptop and first mac would come through for me. I hope someone out there can help and restore my faith.
    Cheers,
    Danny

    I Have this issue as weLl. I have used my notebook for last 6 months and don't want yo lose the data. I have done SMC reset and it won't make a difference. the notebook has turned into a brick with no signs of turningon, boot, fans etc.   what can I do  other than take it to apple store?   Is there any way to reset battery externally? Definitely not happy with experience.

  • Magsafe 2 for retina display macbook pro

    I've had two different MacBook Pro's since 2006...  I went through 4 magsafe power adapters as the cable coming straight off the connector always began to permanently bend at the magsafe connection point such that I didn't trust it from an electrical safety point of view (after seeing one arc at that point a time or two).  Then when I bought what would be my 5th power adapter, much to my positive surprise, Apple had done a redesign that had the cable coming out at a right angle with repect to the way the older ones had the cable come out...  They also beefed up how the cable comes out of the magsafe end. 
    Now I see a picture of the 85W power adapter for the new Retina display macbook pro I am planning to buy soon...  And it looks like they've reverted to the old "wire straight out from the connector" approach... 
    Is that true???   That would be a significant step backward for me as where I have to plug in my mac (to the right of where I sit) having a straight cable coming out from the left of the mac is just going to cause me to start wasting power adapters again... 
    Might I be able to continue to use the 85W power adapter I currently have on my 17 inch 2009 macbook pro???  And it's not the original power adapter but one I bought maybe in 2011 or so...  I love this one where the cable leaves in the direction heading out away from the top of the mac rather than the ones that came out straight to the left...  And the picture of the new one appears to come out straight to the left again...
    And what do you even call the power adapter I have that I bought in about 2011 where the cable comes out at a right angle to the magsafe connector itself???
    Any help folks can provide on the questions above would be much appreciated...  thanks...  bob...

    Ahhh, remember the Mac Pro from a few years ago that used a refrigerant?
    And a number of years ago the Cray XMP and YMP had all of the cpus immersed in refrigerants because they ran so hot they were melting the solder and chips.  Those were something to run on...unbelievable speed, well for that point in time.
    I used to have a watch that had more computing power than the IBM 1620 I first learned to program on.

  • Retina Display MacBook Pro eye problem and strain

    Hi, the name is Ben
    Recently, I boought a retina display and have since been having noticeable eye problem.
    (strain, fatigue, oversensativity to computer monitor/screen ligthing)
    My question was, has anyone been experiencing the same.
    I use my computer pretty much all day, since my work/studies are all based on it.
    Still, after 2 weeks of using retina display macbook pro, I have rapidely seen my eyes
    starting to hurt, being oversensitive to computer monitor (not that I can't use any, but am
    very sensitive to any lighting and need particular moderation in usage)
    Now true, there ARE many good habits I did not know of before,(see some examples below)
    that I am trying to adopt but still (reducing only in part the problem), I must say I am rather worried,
    since I have never had any similar problem in 5 yearsof using my previous 13", macbook, mid 2007.
    Any commments, or suggestion  (constructive of course) would be welcome.
    (few examples of of good habits  I have tried so far)
    as regularly standing (/30 min),
    look at something far away for 20 second (/20 min), blinking regularly, closing eyes for a moment,
    adjusting lighting in work environnement, buying an antiglare film or device (nushield) , adjusting screen position,
    not working to close to screen, using bigger fonts

    an hour on my MBP by itself (someone else's office, a hotel room, an airplane, my lazy sofa) and my eyes lose the ability to focus --and I'm toast.
    Ok, I'll explain why.
    First off your iPad and iPhone screen is smaller, thus doesn't reflect as much as a larger display will.
    Your other displays are in a static environment where you have reduced the glare or it's been reduced just by chance.
    When you take the glossy screen laptop to another location without adequate environmental features to reduce glare imposed (no overhead lights, closed windows, low light etc.) on the screen, thus your getting eyestrain from the glare.
    It's caused by the slightly out of focus reflections verses the screen image, your eyes are automatically refocusing between the two images.
    Your solution in this matter is to apply a anti-glare film to the laptops glossy screen, unfortunately it's going to cost money and be replaced often as it gets dirty, dries out and peels at edges etc.
    Ideally a anti-glare matte screen would be the choice in the first place. I use my Mac for 12 hours a day, 7 days a week and don't have the eyestrain problem anymore.

  • My MACBOOK Pro turned out to be Snow Leopard, and later upgraded to LION. And update the EFI, I would like to replace the Snow Leopard, EFI can not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

    My MACBOOK Pro turned out to be Snow Leopard, and later upgraded toLION. And update the EFI, I would like to replace the Snow Leopard, EFIcan not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

    Do you mean some of your software does not work in Lion? Do you want to return to using Snow Leopard? If so, then do this:
    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

  • USB Superdrive and my new 15" Retina display MacBook Pro

    This probably sounds stupid, but I recently purchased a new 15" retina display Macbook Pro. A week after I brought it home, I went to put in  a DVD, and discovered it didn't have a built in CD/DVD drive. (DUH - first one I ever bought that didn't have one - so much for old guy assumptions.) So, I went out and spent more money on an Apple USB Superdrive, which the Apple store employee cheerfully told me was simply plug and play into the USB port. I plugged, and it won't play. In fact, after 15 seconds, it automatically ejects the CD/DVD. The instructions that came with the Superdrive said "plug and play." That was it. What can I do to get this thing to work??

    I really feel like an idiot. I took the Apple USB Superdrive and the computer back to the Apple Store and told the employee it didn't work. He said, "Sure it does. I have one hooked up at home on the exact same computer. (MacBook Pro 15" with retina display) He plugged it in, inserted a DVD, and, lo and behold, it worked perfectly. What a shock! Now, here's the kicker. The Apple USB Superdrive had been packed in the box upside down. The bottom of the Superdrive is black with a beautiful Apple logo on it. The top of the Superdrive is the plain burnished silver color with no identifying marks or logos. I had set it on my desk the way it came from the box - UPSIDE DOWN ! With the Apple logo on top, I had been loading the CD's/ DVD/s upside down. Of course it's not going to work that way! It now functions perfectly after I was shown that I had the Superdrive upside down on the desk. I tell you, it's tough to get old. A nice little Apple logo on top of the Superdrive instead of on the bottom might have helped too. Problem solved......

Maybe you are looking for

  • Should I be able to update a Blob via a ResultSet? (11g driver exception)

    This code fails at the last line: stmt = conn.createStatement(); String tableName = "TBL_esun01_PPP"; stmt.execute("drop table TBL_esun01_PPP"); stmt.execute("create table TBL_esun01_PPP (sid int not null primary key, blob_col blob)"); stmt.close();

  • The camera light is glowing

    The Green light on the right-side of my Macbook camera is glowing. There are  no applications running which requires this camera to be active. I have rebooted my macbook several times but the light does go off.      When i open my Photo-Booth it does

  • Cannot download app for iphone 6

    Hello I have recently brought an I phone for my mum and she wants the "Whatsapp" app and when I press on get (though the phone itself) then install then I get the password screen. The password is then typed in and on the screen and then "get" comes b

  • Setting up an Exchange Mail Account

    I just purchased an iPad Air 2 and I'm trying to set up a Mail account for an Exchange server so that I can send/receive emails from work and sync my work calendar.  I have the account set up on my iPhone 4s running iOS 8.1.2  I know how to add a Mai

  • CMDLETS to use to push software updates

    Hi guys, I'm playing around with the SCCM powershell cmdlets and I'm trying to work out which ones, and what steps are required to push software updates to my clients? I've created the software update group using the New-CMSoftwareUpdateGroup but I'm