Thunderbolt/firewire 800 adapter

Does the thunderbolt to firewire adapter really works?
Have you noticed any change in speed? I'm reading a lot of negative reviews, and I need one!!!!!

If your iMac model year is correct at the bottom of your post.
iMac (24-inch Mid 2007)
That model year doesn't have a Thunsderbolt port and that adapter won't work.
If you do have a newer iMac that does have a Thunderbolt port the TB to FW adapter does work. the complaints are about it not supplying enough power to devices connected to it like a Real FW port did.
I have one but only used it once or twice to connect a second FW device to my Late 2011 MBP that does have one FW port.

Similar Messages

Thunderbolt to Firewire 800 Adapter

I have a 2010 MacMini that I want to add the Pegasus Tech J4 RAID Drive to. It is Thunderbolt only. Does anyone make a Thunderbolt to FireWire 800 adapter? I know Apple makes the reverse, FireWire 800 to Thunderbolt.
Thanks for the help.

All Thunderbolt adapters are only from computer to
peripheral. There is no adapter that works in the
opposite direction.
Therefore, if you want to use the Pegasus Thunderbolt
device, you need a computer with a Thunderbolt port.

HT201338 Can I connect a firewire 400 to firewire 800 adapter and then a firewire 800 to Thunderbolt adapter(standard Thunderbolt to firewire adapter) together to digitize video from a miniDV video camcorder?

I have a 10 year Canon MiniDV camcorder that I used to connect via firewire to digitize the data. Now my IMac only has a Thunderbolt connector and my camcorder uses the older firewire 400 standard. I would like to digitize the video into my IMac. How can I do this?

I did a little looking around and found a Thunderbolt to Firewire 800 adapter, and then a Firewire 400 to 800 adapter, but no Thunderbolt to Firewire 400. Amazon and Apple stores had the Thunderbolt to Firewire 800 cable and Amazon had the Firewire 400 to 800 adapater.
Wherever you get the cables, ask them if it will work OK with what you want to try and do - if they don't know make sure you can return if there is a problem. I think it will because the Thunderbolt side is so much faster than what the camera can pump out to it. If it were the other way (Thunderbolt device to a Firewire computer I would expect that to fail since the Firewire could never keep up with the data rate of the incoming Thunderbolt device).
Maybe if you have a local Mac user group or a friend with an older mac with a firewire 400 port you could do it this way too?
Good luck

Thunderbolt to Firewire 800 adapter not enough power

Warning to those who own G-Technology G-Raid Mini (Gen3) and a Macbook Pro Retina.
I just received my thunderbolt to firewire 800 adapter from apple yesterday. I hooked it up to the rMBP and plugged in my G-Raid Mini, the G-Raid Mini powers up, but then proceeds to make a beeping noise. The G-Raid Mini will not mount over bus-power thunderbolt to firewire 800 adapter. Although when I plug the G-Raid Mini into wall with power supply and then plug in the thunderbolt to firewire 800 adapter, the drive mounts.
It seems there is not enough thunderbolt bus power to mount a G-Raid Mini (Gen3)...
Has anyone heard otherwise? Can they confirm this doesn't work for them either.
Thanks.

Same for me.
Luckily I tested it is advance of playing a gig at the weekend using Serato.
Complete JOKE!
I can't believe that Apple hasn't considered the fact that the majority of creative professionals need high capacity fast mobile storage.
I suppose we now need to wait for 2Tb Thunderboth enabled SSD drives which by my reckoning will cost more than the MacBook Pro!!!!

I am using IMovie 11 with a new iMac. Unable to import video from a Panasonic PV-GS400 mini-DV camcorder using a Firewire IEEE 1394 400 cable connected to a Firewire 400 to 800 adapter which is then connected to a Thunderbolt to Firewire 800 adapter.

How can I get iMovie to recognize my Panasonic PV-GS400 as a device so I can import video to my iMac? I have a FireWire IEEE 1394 400 cable connected to the camcorder. Since my new iMac has only Thunderbolt ports, I purchased a Firewire 400 to 800 adapter to connect to the cable. I also purchased a FireWire 800 to Thunderbolt adapter to connect to the computer. My camcarder is still not recognized.

I would suggest that you try a 9 pin to 4 pin Firewire Cable along with the Firewire to Thunderbolt adapter.
Those Firewire 400 to 800 adapters do not seem to work well with iMovie.
The 9 pin to 4 pin cables are available at reasonable prices here, for example.
http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10301&cs_id=1030104 &p_id=3541&seq=1&format=2

Are there any problems using the Thunderbolt to Firewire 800 adapter?

I found the only way to migrate my old mac to my new i
mac was to use a firewire 800 to thunderbolt adapter, or ethernet. Am I correct?

Welcome to the Apple Support Communities
You can also migrate wirelessly > http://support.apple.com/kb/HT4889
However, I recommend you to use FireWire to migrate from your old Mac because it will be much faster than Wi-Fi or Ethernet, so if your old Mac has got a FireWire port, buy the Thunderbolt to FireWire adapter for your Late 2012 iMac and migrate from your old computer

Is there a USB to Firewire 800 adapter?

Hi,
I've seen that I can get a USB external hard drive for much cheaper than a firewire800 one so was wondering if there is an adapter to plug a usb hard drive into the firewire800 port on my MBP so I can save my USB ports?
Thanks in advance
Simon

No. No adapter exists to connect USB devices to a FireWire port; hubs which provide both USB and FireWire ports don't transfer any data between the interfaces.
(23300)

What is FireWire and what FireWire adapter do I need to use FireWire 800 for my portable external hard drive ?

Hi guys, I'm new to Mac. I have a MacBook Pro 13" (late 2011) with Lion OS and Parallels 7 (Windows 7). My understanding is that there is FireWire connection / extension built in to the MacBook Pro already. I also have a Seagate FreeAgent GoFlex portable external hard drive 750GB USB2.0 and 3.0 (that can be used for PC and Mac). It states that the portable external harddrive is FireWire 800 compatible. The questions are (1) how does FireWire works ? (2) how do I use or activate FireWire 800 ? (3) is there any setup / setting changes I need to on my MacBook Pro ? (4) what FireWire adapter do I need to purchase to connect my portable external harddrive to my MacBook Pro ? Is it expensive ?
I read a few articles online but they are too technical for me. They mentioned something about FireWire adapter with 6 pins or 9 pins. Not sure what that means. I'm totally confused. So any help, advise or guidance will be much appreciated. In Layman's term would be better. Thanks.
How about Thunderbolt ? Is it compatible with the above external portable hard drive mentioned ? Do I need a Thunderbolt adapter for it ? How do I activate or use Thunderbolt ?

Thanks, Clinton and Alberto.
The below link is the Seagate FreeAgent GoFlex portable external hard drive (product code STAA750302) that I have. It states that it features USB 2.0 or 3.0 plug–and–play connectivity and easily upgradeable to USB 3.0, FireWire 800 or eSATA. It only comes with a 18-inch USB 3.0 / 2.0 backward compatible cable.
http://www.seagate.com/au/en/external-hard-drives/portable-hard-drives/standard/ goflex/
Based on the above, my understanding is that I need to buy a FireWire 800 adapter to connect to the portable external hard drive so that I can use FireWire 800 with my MacBook Pro. Is this correct ? Do I need to get a separate cable as well or can I just use the 18-inch USB 3.0 / 2.0 backward compatible cable that was provided in the box ? If so, what sort of FireWire 800 cable do I need to get ? 9 pin to 9 pin ? 6 pin to 9 pin ? Or 4 pin to 9 pin ?
https://www.lindy.com.au/online/arrshop.exe?anonymous=true&cat=b1

Thunderbolt to FireWire 800

Hey,
Just wondering - where is the Thunderbolt to FireWire 800 adapter? Apple promised it by the end of July. I cant find any news.
This is a big determining factor in whether or not to return my MBPR.
Thanks!

Look at the column to the right - "More Like This" - there have been a number of discussions as to when the adapter will be released. Some confilicting information, but I would expect it within any time between this week and sometime in September: I don't think that anyone here really knows for certain.
Sorry,
Clinton

Thunderbolt to Firewire 800 external drive problems

I recently upgraded from a MacBook Pro 17" early 2011 to a MacBook Pro Retina 15" (early 2013). I have a Drobo and two Seagate 4TB external drives, all connected via Firewire 800. So, I added a Thunderbolt to Firewire 800 adapter and, it seemed, life was good.
I keep my large iTunes Movie and TV show collection on the Drobo. Since transitioning to the new MacBook, I have had a number of issue with watching movies on my Apple TV 3. Randomly, and periodically, the movie appears to be corrupted - the audio track skips/loops and the image is horrible macroblocked, as if the file is damaged. When I check the movies on the Drobo, opening it with Quicktime on the MBP, it plays just fine at the same spot it appeared damaged on the Apple TV 3.
A second symptom is this: I can no longer re-encode video with Handbrake with the source and target files on the Drobo - it gets some portion of the way through and it just stops, leaving the video partially encoded; again, at random locations/offsets into the video and not the same spot twice.
My initial thought is that connection to the Drobo is dropping out and coming back, on its own, but long enough to cause the above problems.
Is anyone else seeing this issue or something related when using the Thunderbolt to Firewire 800 adapter with large drives?
Thanks, in advance.

Update: I exchanged the Thunderbolt to Firewire adapter and the issue persists. I have a Drobo that I used with my previous system, a PowerMac G5, and never had any issues like this.
It does not matter what software I use. But at some point video playback will suddenly become garbled. If I start the video from the beginning, sometimes the garbled video will start sooner but never later. A restart temporarily resolves the issue. If I copy the file to the local hard drive the video will play back garbled. This is indeed a very strange issue. The issue behaves like a bandwidth bottleneck.
I was having this issue prior to upgrading to Mavericks.
Fred K
iMac (Late 2012), 3.4 GHz i7, GTX 680MX, Fusion Drive, 24 GB RAM, Drobo (Firewire via Thunderbolt)

FireWire 800 Daisy Chain Problem

Hello everyone, I have three firewire drives. Two 2TB 3.5" drives and one 2.5" 1TB drive. All three are connected to my MacBook Pro 13" via the one firewire port in a daisy chain. I usually always have the 3.5" disk connected. When I add the portable drive to the daisy chain, it crashes the desktop drive, and I get the "do not disconnect drives without ejecting" message. Is this normal? I am thinking of purchasing the Thunderbolt to Firewire 800 adapter, only to avoid the crashes of the other drives in the Daisy chain.
My Mac is an early 2011 13" MacBook Pro i5 2.3GHz with 16GB RAM.
Thank you for your help in advance

Sorry for my late answer.
The disc has 2 FW800 and 1 USB2.
If you buy a TB to FW800 you should give to the disc more power from the TB port.
If you connect the disc with USB you could use a special cable with 2 plugs on one side and one smal USB plug on the other. This cable is designed to give to one disc the pover grom 2 USB ports but one of the 2 can also be connected to an USB power supply, so ytou will give to the disc more power.... of copurse with USB you have a lower speed.
If you have Thunderbolt you should try to use TB discs. I know they are expensive but there is a trick which I like to use... have a look here http://www.youtube.com/watch?v=1Aa3BXmQVpc

First Gen MacBook Pro and no firewire 800. Suggestions for capturing video?

My first gen MacBook Pro only has one Firewire 400 port and nothing else (I got in a argument with a mac store clerk regarding the truth of this statement). My external hard drive has one Firewire 400 port, two Firewire 800 ports, and 1 USB. So far as I know the standard for most video cameras are still Firewire 400, in which case daisy chaining is out of the question (considering I will be using that port to connect to my computer). Any suggestions on how to capture video straight from a deck to my external hard drive?
Thanks!
MacBookPro1,1 Mac OS X (10.4.9)

I think you can use a FW800/400 adapter and daisy chain your camera to the drive.
http://www.amazon.com/Sonnet-FireWire-800-Adapter-FAD-824/dp/B0000CDJPQ

DVCPro HD transfer through FireWire 800

Hi there,
I'm planning on connecting an external DVCProHD tape deck to capture footage using Final Cut Pro through the 800 port, then chaining a LaCie drive via an adapter to catpure the footage on to this external drive. So essentially, a FireWire 800 2-port adapter plugged into the single 800 connection in the MBP.
Do any of you know what impact this amount of data will have on the drive? I'm obviously keen to avoid frame drop-out and want to maximise the speed of the drive, although I'm wary of connecting both inputs via the 800 adapter through the single port.
Thanks, Mark

Hi Robert,
Thank you for your response.
I probably wasn't clear enough sorry! I am hoping to hook in a FireWire 800 adapter, maybe something like this:
http://www.amazon.co.uk/Port-FireWire-800-Repeater-Hub/dp/B000OZ68KW/ref=sr11?ie=UTF8&s=electronics&qid=1279624822&sr=1-1
Into this, I will connect both the DVCPro HD deck and the external LaCie drive. My main concern is running both these devices through the adapter, as it's essentially using one 800 port for both data streams.
Is this something that is feasible? Am I right in saying that this will data stream will be quicker than hooking the drive in via USB?
Thanks,
Mark

Current FireWire 800 drivers limitation - confirmation needed

I just got a Seagate GoFlex Desk of 3TB USB3.0 ; I connected the device using an USB2.0 (happy the standard is still backward compatible) to see if the device is functioning.
Try it on the FireWire 800 adapter and I unhappily had to contact the Seagate support. They respond as follow :
I understand that you're having an issue getting the 3 TB Go Flex Desk to mount.
The reason for the Mac OS not recognizing the drive is because the Mac OS currently does not have the firewire 800 drivers that support drives that are over the 2 TB limit. This is unfortunately one of the limitations of the Mac operating system. At this time, Mac is currently working to develop firewire 800 drivers that support the larger hard drive size, but no information has been released by Apple, that we know of, as to when a driver update would become available.
Could I get confirmation as I couldn't find any knowledge base on that issue? I may have not used the proper keyword...
Thank you very much.

FA GoFlex Desk :
Capacité : 3 To (3 000 592 977 920 octets)
Support amovible : Oui
Disque amovible : Oui
Nom BSD : disk1
Identifiant du produit : 0x50a1
Identifiant du fournisseur : 0x0bc2
Version : 1.00
Vitesse : Jusqu’à 480 Mb/s
Fabricant : Seagate
Identifiant de l’emplacement : 0xfd100000
Courant disponible (mA) : 500
Courant requis (mA) : 0
Type de carte de partition : APM (Carte de partition Apple)
État S.M.A.R.T. : Non géré
Volumes :
Capacité : 262 Ko (262 144 octets)
Inscriptible : Non
Nom BSD : disk1s1
Aperture :
Capacité : 3 To (3 000 458 477 568 octets)
Disponible : 2,67 To (2 673 969 479 680 octets)
Inscriptible : Oui
Système de fichiers : HFS+ journalisé
Nom BSD : disk1s3
Point de montage : /Volumes/GoFlex
And to confirm, the USB does work without trouble.
Message was edited by: LMA1980

I need to connect my old Mac book pro to the new one to transfer files. The old one doesn't have Thunderbolt 2 and the new one doesn't have Firewire 800. Will the Thunderbolt to Firewire adapter or Firewire to Thunderbolt adapter work?

I want to transfer data from my old Mac book pro to my new one using migrate. The old computer doesn't have Thunderbolt 2 and the new one doesn't have Firewire 800. Does the Thunderbolt to Firewire or the Firewire to Thunderbolt adapter work to connect them and transfer data?
Thank you!

Yes, use a Firewire cable and the FW to Tbolt adaptor.

Thunderbolt/firewire 800 adapter

Similar Messages

Maybe you are looking for