Thunderbolt for ethernet and display at same time

i need to use my thunderbolt port for both ethernet and extended display. can i split the thunderbolt?

Hello berstler
One way you can do that is with the Apple Thunderbolt Display as it has a built in Ethernet port. You may want to look at a Thunderbolt Express Dock from Belkin to see if that would be a potential solution.
Apple Thunderbolt Display (27-inch)
http://store.apple.com/us/product/MC914LL/B/apple-thunderbolt-display-27-inch
Belkin Thunderbolt Express Dock
http://store.apple.com/us/product/HB865ZM/A/belkin-thunderbolt-express-dock
Regards,
-Norm G.

Similar Messages

Using ethernet and wifi at same time

I just upgraded to Lion and now I can not access my WIFI print server at the same time I am connected to the ethernet using the wired cable. In Lepard it worked fine. To clarify, I use the ethernet cable for internet access and I use WIFI to print and access a network hard drive. When WIFI is off, the internet works fine, the moment I turn on the WIFI, the internet sonnections stops. Since October 2010, this connection has worked fine until Lion. I have a second IMac on Lepard and it also still works fine with both ethernet and wifi at the same time.

Try to swipe up and press play from control centre while in your game. This often works however with some games/app the developers have set to pause your music and after you swipe away control centre the music will stop.
Hope this helps!

PC and MAC at same time

can this function as drive for PC and MAC at same time?

Yes. Ignore the drive's formatting.
(62296)

HT201338 adaptor that accepts both VGA and ethernet cables at the same time that can be plugged into the Thunderbolt port

I have my Apple cinema display connected to my MacBook Air via the Thunderbolt port, but I also want to connect an ethernet cable.
Is there an adaptor that accepts both VGA and ethernet cables at the same time that can be plugged into the Thunderbolt port

I have my Apple cinema display connected to my MacBook Air via the Thunderbolt port, but I also want to connect an ethernet cable.
Is there an adaptor that accepts both VGA and ethernet cables at the same time that can be plugged into the Thunderbolt port

HT5922 Can I airplay a movie from safari on my MacBook to Apple TV and still use the computer for something else at the same time?

Can I airplay a movie from safari on my MacBook to Apple TV and still use the computer for something else at the same time?

Hi frogjt,
Welcome to the Apple Support Communities!
Great question! You can absolutely do this in OS X 10.9. The attached article explains how the process of using AirPlay with Apple TV to create a second display. Also, towards the bottom of the article there are instructions on how to set your Displays preferences on the computer to make sure the TV and MacBook Pro displays are set up the way you want them to be.
OS X: Using multiple displays in Mavericks
http://support.apple.com/kb/HT5891
Have a great day,
Joe

Create SP that returns value and at the same time displays query result in output window

I would like create an SP which will return the records from the table and also return value to my c# client application.
For Example:
Select * from employee returns all the query results in output window.
Now I want to create an SP
Create procedure Test
As
Declare @ret int,
Select * from employee
set @ret = Select count(*) from employee
if @ret > 0
return 1
else
return 0
The above algo should return 1 0r 0 to c# client application and at the same time display all employees in sql query output window.
Can u pls help in this regard.

The above algo should return 1 0r 0 to c# client application and at the same time display all employees in sql query output window.
Why? and No!
Why? Your procedure generates a resultset of some number of rows. You check the resultset for the presence of rows to determine if "anything is there". You don't need a separate value to tell you this. Note that it helps
to post tsql that is syntactically correct. While we're at it, if you just need to know that rows exist there is no need to count them since that does more work than required. Simply test for existence using the appropriately-named function
"exists". E.g., if exists (select * from dbo.employee).
No! A stored procedure does not display anything anywhere. The application which executes the procedures is responsible for the consumption of the resultset; it chooses what to do and what to display.
Lastly, do not get into the lazy habit of using the asterisk in your tsql code. That is not best practice. Along with that, you should also get into the following best practice habits:
schema-qualify your objects (i.e., dbo.employee)
terminate every statement - it will eventually be required.

Can we use both 0FI_AP_3 and 0FI_AP_4 for Delta Loads at the same time.....

Hi Gurus:
Currently my company uses 0FI_AP_3 for some A/P reporting. It has been heavily customized & uses Delta loading. However, SAP recommends the use of "0FI_AP_4" for A/P data fro delta loads. I was able to Activate 0FI_AP_4 as well & do some Full Loads in Dev/Test boxes. Question is whether I can use both the extractors for "Delta" loads at the same time......? If there are any issue, what is the issue and how ccan I resolve it? Is the use of only one extractor recommended......??
Please let me know as this impacts a lot of my development....! Thanks....
Best...... ShruMaa
PS: I had posted this in "BI Extractors" forum but there has been no response...... Hope to get some response.......! Thanks

Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer

Is it possible to connect the iPad to an Infocus and a remote for ppt presentations at the same time?

I've always used PC and I'm planning on making the transition to Mac. That's why I'm considering buying an iPad. Today I went to Best Buys and the Mac guy told me that it isn't possible to connect the iPad to an Infocus and a remote for ppt presentations at the same time. Is that true? I'm a speaker and that was the main reason I was considering buying an iPad, so I didn't have to carry my laptop. Thanks for your help!

Thanks for your reply. Looks like it can as I have just found this https://www.youtube.com/watch?v=nKp02y4JXVs

Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parreral.

Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parreral.

hello - I have just moved your post to the Topic forums - you had posted your question in an obscure non-visible promotional community Hopefully our community users will see your question now.

Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parallel

Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parallel.

Hi Johnny,
Per my understanding you can. It is equivalent to running 2 IGP and installing the entry in RIB table based on administrative distance.
-Nagendra

HT4009 Itunes charged me twice for the same app. I wish to buy angry birds seasons hd and angry birds rio hd. both for ipad. and you charged 2 times for a.b. seasons hd.

Itunes charged me twice for the same app. I wish to buy angry birds seasons hd and angry birds rio hd. both for ipad. and you charged 2 times for a.b. seasons hd.

These are user-to-user forums, you are not talking to Apple here and they don't monitor these forums. If you have a billing problem then you can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

I want to check the status of application No. For it is written in my account was canceled and I did not do so I urgent news about his condition and the reason for canceled I redial the same time as the sender befo

Thank you for your attention
I want to check the status of application No. W439602096
For it is written in my account was canceled and I did not do so
I urgent news about his condition and the reason for canceled
I redial the same time as the sender before you
We are waiting for you

This is a user to user forum. You are not talking to Apple here. We cannot help you; you will need to contact wherever the order was placed.

Delete records in a table and at the same time print out for reference

I am working on a req to delete some records from a table and at the same time, record/print the deleted records in the outstream (DBMS_OUTPUT.PUT_LINE)
DECLARE
v_rec_po hst_po%ROWTYPE;
BEGIN
DELETE FROM hst_po po
WHERE abbrpoid = '&opportunity_code'
AND updatedby = (SELECT employeeid
FROM tes_employee
WHERE name = &emp_name)
AND audittimestamp BETWEEN TO_DATE ('&start_timestamp',
'DD-MON-YYYY HH24:MI'
AND TO_DATE ('&end_timestamp',
'DD-MON-YYYY HH24:MI'
END;
I was thinking of using returning into and then using DBMS_output to pull out the delted records, but there will be multiple rows deleted fro this statements. I am stuck here..Can anyone help

How about:
SQL> create table t
2 (x int)
3 /
Table created.
SQL> insert into t
2 select rownum
3    from all_objects
4   where rownum <= 10
5 /
10 rows created.
SQL> declare
2     cnt pls_integer;
3 begin
4     delete from t;
5     cnt := sql%rowcount;
6     dbms_output.put_line ('Removed: '||to_Char (cnt));
7 end;
8 /
Removed: 10
PL/SQL procedure successfully completed.Edited by: Alex Nuijten on Jun 4, 2009 8:58 AM

Can i use my mac mini for some users at the same time?

can i use my mac mini for some users at the same time? i mean with their own screen, mouse, and keyboard

If you're asking whether more than one user can use the computer at the same time with multiple displays, the answer is no. Other users can log in over a network with Screen Sharing, but each one will need his own computer (not necessarily a Mac.)

Can I run the currency translation for multiple years at the same time?

Dear Friends,
I set up currency translation on our BPC NW 7.0 system and it is working fine ONLY if I run it for any one year at a time. But if I select multiple years in the data package (FX Restatment) selection it only calculates for the first year in that selection.
say if I run the data package for years: 2009, 2010, 2011, 2012, it only performs currency translation for the year 2009.
Can I run the currency translation for multiple years at the same time ?
Note: The year is determined from the YEAR property of the "Time" dimension
appreciate any inputs,
thanks

You can run currency translation for multiple years.
I think the problem it is actually related to how you are sending the parameter to currency translation script.
Just review the script logic log and you will see with what parameters was called currency translation FXTrans.
My expectation is that actually the script is called just with first year and that's the problem.
Log of script logic you can find it into:
C:\BPC|DATA\Webfolder\YourAppset\YourApplication\Private Publications\Users used to run logic\Temp
Regards
Sorin Radulescu

Thunderbolt for ethernet and display at same time

Similar Messages

Maybe you are looking for