Thunderbolt in win7 64 bit OS

I see promise has the pegasus disk drive that interfaces to macbook pro with thunderbolt, but it says mac os X.
Anyone know if thunderbolt on promise pegasus would work in win7 64 bit OS?
Only looking for JBOD (just a bunch of disks) vice raid.
Thanks, Steve

I may stay away from this bleeding edge technology for now (I have been cut a few times!) and just get a dual esata Expresscard /34 card to plug into my 17" MBP - using USB2.0 is killing me when copying 2TB of data from one drive to another (use a 8 bay removable sata computer when in the office).
It doesn't even look like one can buy the pegasus 4 bay device right now.....

Similar Messages

  • Why Apple Thunderbolt Display won't work on BootCamp Win7 64-bit while being plugged to MBA?

    Hello,
    I have MBA (latest) & installed win7 64-bit in BootCamp, I do also have Apple Thunderbolt 27" Display.
    When I disconnect the ATD and re-connect it in Mac OS X, it works fine like a charm, but when I disconnect then re-connect in BootCamp, it doesn't work at all whatsoever, in fact, I have to restart my MBA (while thunderbolt is connected) to make it work in BC, this is the only way to make it work.
    So, my question is; If I disconnected ATD in BootCamp then re-connected it, why it won't work?
    I've googled everywhere about this issue, but no luck.
    Any idea?

    to calculate how much video ram is needed one
    take
    the vertical number of pixels and * with horisontal number of pixels and * with 32bit colour which is 4 bytes
    so if it's the 13" macbook air
    1440 * 900 * 4 = 5.184MB for main display
    +
    2560 *1440 *4 = 14.75MB for second display
    sounds like the intel hd 5000 would have that as dedicated memory even if the windows driver did not allow to use shared system mem as extra
    could be a problem with the driver for windows
    maybe a person who ran a setup like yours would have more to contribute with
    my setup is an imac 21" with amd video card and a 24" dvi dell monitor and that works fine in windows so it's a different animal altogether

  • Adobe acrobat 7.0 on new Win7 64 bit computer

    I need to use acrobat 7.0 with an older software that I am transferring to a new computer.  I have a keycode for acrobat 4.0.  The Transfer Activation option is greyed out.  Any suggestions?  Thanks.

    If you don't have your SN for AA7 handy but did register, then you can go to the Adobe.com site, login, go to the My Product link under your name at the site. You can run AA7 on Win7 64-bit, but will have to do some fix up to do work arounds. Neither AcroTray.exe or the Adobe PDF printer of AA7 will work on the system and those require the workarounds to be able to create PDFs.
    I am not sure why you mentioned AA4. I doubt that you can do much of anything with AA4. Is there a reason you specifically need AA7 and that a newer version would not do the job? Not sure what you mean about transfer activation. You have to install the software. However, AA7 also requires a different process since the activation server for AA7 is no longer available.

  • 'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer

    I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8.  [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems: 
    First, after importing the file (.avi), I get a message about ‘dropped frames.’ 
    Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ]   I can use the shift-arrow key and see that the video is there.
    Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer.  There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux). 
    Questions:
    1.  Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
    2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

    "I think you're telling me you're using a backwards compatible Digital8  camcorder to capture your video as DV-AVIs. Is that right?" YES
    "Are you using  Premiere Elements to do this capturing?" YES, AS ABOVE PE8
    "Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
    WMP v12 is dumb. Under properties, media, it says 'video.'  However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
    So, back to the Questions:
    1.  Why doesn’t the source  monitor play the video? Is this a problem with PE8 (latest update as of 3  March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
    2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

  • Premiere Elements 11 will not install in win7 64-bit

    I am trying to install Premiere Elements 11 on a Win7 64-bit machine. I did it last year on another machine just like it, but now I get an error message saying it won't work in 64-bit. The license is valid and paid up. Can I get a new link to a fresh install file?

    if you follow all 7 steps you can dl a trial here:  http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
    and activate with your serial.
    if you have a problem dl'g, you didn't follow all 7 steps.  the most common error involves failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).

  • My Nano 4th gen shows up as a Removable Disk and keeps asking me if i want to formart. My OS is win7 64 bit, My Nano 4th gen shows up as a Removable Disk and keeps asking me if i want to formart. My OS is win7 64 bit

    My Nano 4th gen shows up as a Removable Disk and keeps asking me if i want to formart. My OS is win7 64 bit, My Nano 4th gen shows up as a Removable Disk and keeps asking me if i want to formart. My OS is win7 64 bit

    What file system format is the iPod formatted with?  FAT32? To check, right->click on your iPod's from under Computer and choose Properties.
    Have you tried to reformat it yet to see if that resolves the issue?
    B-rock

  • Crashes on Mac side when running Win7 64 bit in bootcamp as VM in Parallels

    I got my MacBookPro mid April 2010. Microsoft store partitioned & set up bootcamp with Win7 64 bit. I then Purchased Parallels 5 & set it up using the bootcamp partition as the Virtual machine. Not knowing what I was doing at 1st, I accidentally created a 2nd VM the 1st time I tried to use it & didn't know how to get rid of it until a couple weeks ago.
    It was all working pretty well until about Feb 19 when I was at the office trying to take notes in Pages. I had just started when it started alternating between Pages, desktop & blue screen then pages quit. Same when I reopened pages so just shut down & an hr or so later was ok. Over a period of about a wk rapidly increasing # of crashes of Safari & Pages to where it was becoming hard to use. Went to Genius bar who told me to do archive & install after back up. Had to go research & buy back up HD & before I could back up it got so bad it wouldn't even boot. Apple care helped me do Archive & install over the phone. Much better but still problems. Fri he checked back & had me reset Safari & empty Safari & other caches. Then Parallels crashed. So shut down & booted into bootcamp. It was also messed up.
    Then remembered the old, if all else fails trick of shutting it down & leaving it for a bit to clear out the volatile memory. Came back & booted into bootcamp & opened Outlook etc. Ok. Then booted into Mac & then parallels & it was ok.
    But problems continued. Repaired preferences, etc. I also found out that i didn't have the latest build of Parallels 5 (from the Parallels user forums) even though the update process said I did. They seemed rather techie. I finally did figure out how to download & install the latest build of Parallels. Not sure if that helped or why the check update from the pull down menu acted like it was checking & then told me I had the latest one but mine was several builds older than the current 1.
    Along the way, I finally learned how to delete the duplicate VM & it worked better for awhile, but then was getting bad. I verified the disk in Disk utility & it stopped almost immediately & said it needed to be repaired. Genius bar did that.Erase & install was mentioned. then more crashes, more problems so again verified disk & it ran longer but again stopped & said repair needed. Went into Genius bar on 3-25 for erase & install. Got it back next day but I think maybe the genius (who I had asked to help set up bootcamp partition) restored more than just the users which is what the head genius had said was the only thing to restore. Not sure, but it appears my new settings are showing. & it appears that whatever was corrupted may have been restored as well, not sure. Made another appt for genius bar to help get things right.
    The tests that were run showed that the hardware was ok. Several people told me while this was going on that it was likely related to running Windows on a mac & especially as a VM, & then someone or 2 also mentioned that running in coherence mode could be an issue.
    This whole thing has been very frustrating & isn't what I expected after coming back to mac, but still needing to run windows for business software. My old macs never had problems. My brother said his macs are reliable & don't have problems.
    When it got so that I couldn't even boot on the mac side the 1st time, I was able to boot into bootcamp & had to do drag & drop backup of mac files to my windows external HD. But before & after that when Safari was crashing so much it wasn't very useful, I did better in IE running in Parallels.
    What I'm wondering is what might have caused this & more specifically, what can I do to avoid it happening again? A major reason that I use Parallels all the time is that I sync a windows mobile 6,5 phone with Outlook so its not very convenient to have to boot into bootcamp to check email.
    The fingers have been pointed at maybe the partition getting messed up but no real answers so far. So while I assume we will get it working ok again, I'm afraid the same thing could happen again. It was suggested that it may have been doing little things kind of behind the scenes where it was getting corrupted a little bit by little bit which didn't show up until the rapidly cascading events that lead to the erase & install. So I don't know if that was the case or if something happened around Feb 19 when I first really noticed the problems (although there may have been some unexpected quits before then, but not bad or repeated). Sorry this is so long.

    Chris,
    Thanks for the info/suggestions. I had already done the "clean install" without knowing it. I also had uninstalled Firefox and Chrome and was looking at dumping Safari, but I found the culprit file "_Flash Player.plugin" (version10.2.151.49) on a search for "Flash Player" under Spotlight.
    Strange thing was the file did not appear when just browsing through the various directories or searching with finder. Removed it and all is good.
    Mike

  • Memory Leak Issue With Win7 64 bit and Youtube.

    I have a Win7 64 bit using IE9 with version 11.4.402.265 installed. 4 MB installed.
    Whenever I go to Youtube or Liveleak, and watch videos, over time it uses up to 4gigs of my memory! Even if I close the window, it does not free up the memory until I Ctrl/Alt/Delete and shut down the window(s).
    I normally only keep open 1-2 windows. Google toolbar is about the only thing installed. I can open 5 and more tabs, but as long as the site does not use flash, I don't have issues and each window usually uses under 200k memory watching them in task manager.
    When I go to open and watch a youtube video, it slowly climbs to 200k and within an hour, I can be at 2 gigs or more memory and up to 4 gigs within 2 hours (or sometimes much sooner). Closing the window does not release the memory until I end task on it and then after a minute or so, the memory seems to clear and everything is back to normal.
    I searched the forums and seems lots of users, report memory leaks, some using yahoo toolbar installed, which is not my case. I do use yahoo as my e-mail address, no idea if that is related or not. I had the same issue when I had the prior Flash version installed, this has been going on for months. Right now having only this window open, using 129, 192 memory. If I open one more window (using the 64 or 32 bit browser) and start youtube, the memory in that window keeps climbing about 50-100kb a second, so it adds up quickly. I have kaspersky running in the background and that is about it other then my nvida driver setup.
    Really frustrating that so many people here and across the internet have reported this. I did have IE8 a few weeks ago and still had the same issue, upgraded to IE9 to see if that helped.
    Interesting side note, if I pause a video, it slows way down on the memory leak, but still rises at a slower pace. I don't know if this is an IE thing or Flash. I have had this setup since 2009 and don't recall having issues with IE7. I use Youtube so much as a teaching instrument as a music teacher, so constantly have lessons going on it.
    Thanks and hope someone has come up with something. I also build computers and have done some programming, so I could modify a file if needed with clear instructions.

    This could be similar to bug https://bugbase.adobe.com/index.cfm?event=bug&id=3334814

  • My Firefox crashes when I try to go to Tools Get Add-ons. I don't have any add-ons installed on my Firefox at all. I use Win7 64-bit.

    My Firefox 4.0.1 crashes when I try to go to Tools>Get Add-ons. I don't have any add-ons installed on my Firefox, at all. My OS is Win7 64-bit. I've already tried Uninstall-Reinstalling Firefox but it didn't work either.

    See:
    * http://kb.mozillazine.org/Firefox_crashes
    * https://support.mozilla.com/kb/Firefox+crashes

  • Numerous attempts at a clean install of iTunes have failed.  I am running Win7 64 bit on a Toshiba L series Satellite w/8G RAM and 100  G HDD space.  Error message was (-42404), but following a complete (recommended) uninstall am now getting "Error 7".

    Numerous attempts at a clean install of iTunes have failed.  I am running Win7 64 bit on a Toshiba L series Satellite w/8G RAM and 100  G HDD space.  Error message was (-42404), but following a complete (recommended) uninstall am now getting "Error 7".  The prior uninstall included the establishment of administrator rights to files and folders left in the Apple folder after running the uninstaller, and successfully removing ALL visible and hidden Apple files and folders.
    Any other suggestions out there folks?

    On Oracle Metalink site, there are many documents which says that Oracle 32 bit software works on 32 bits OS and 64 bits software works on 64 bits OS. Official support is only in those combination....
    So there is no good way to help you in your case-XE is 32 bit application with hard codded compiled libraries which most of them would not work on 64 bit OS.
    Sorry
    8(
    Hope this helps

  • I want to install my photoshop 5.0 limited edition but the pc displays i should check if it is a 32 or 64 bit application. i changed my windows os  from xp to win7 64 bit (i think that is the problem) how can i run my photoshop on this system?

    i want to install my photoshop 5.0 limited edition but the pc displays i should check if it is a 32 or 64 bit application. i changed my windows os  from xp to win7 64 bit (i think that is the problem) how can i install and run my photoshop 5.0 le on this system?

    Kglad Creative Suite 2 is only applicable to individuals affected by the activation server shut down.  A complete list of affected software titles can be found at Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products.

  • Trying to install 64 bit premier elements on win7 64 bit. never works

    trying to install 64 bit premier elements on win7 64 bit. never works

    What errors are you getting? Have you downloaded the software or installing via disc.
    In case of a disc, the disc 2 is meant for Windows 7 64 bit.
    Please refer : http://helpx.adobe.com/photoshop-elements/kb/install-premiere-elements-photoshop-elements. html

  • Drivers/Utilities CD..XP and VISTA..can I use vista for WIN7 64 bit install?

    Drivers/Utilities CD's, that came with the p-35 Motherboard..XP and VISTA..can I use Vista for WIN7 64 bit install, or download the chip set drivers for Awin7 BEFORE the OS install??
    MSI P-35 Platinum
    Q6600 Core 2 Quad
    Presently XP 32Bit
    NVidia geforce 8600GT
    8GB DDR2 SDRAM PC6400-800MHz
    Windows 7..waiting to be installed.
    Hello,
    I WANT TO DO A CLEAN INSTALL.I have Windows 32 Home XP, I have the Win7 OEM I want to install.
    When i bought my MSI mobo, it came with both the drivers and utilities for XP and Vista.   Can I use the chip set drivers and utilities for Vista, until i can go to MSI and download the latest chip set drivers?  When do i install these drivers....before the OS install, or after?
    Can I format these drives first, go in the BIOS change to boot sequence from Raptor Boot Drive to the DVD/Rom to boot the WIN7 from, or should I format while installing Win7?  
    Someone on another forum suggested that 1) disconnect the two droves, then install the OS on the boot drive, and2) before win7 install, make the proposed boot drive (NOT THE DVD/CD ROM the first choice priority for the boot sequence....is this right?
    Is it absolutely necessary to unplug the other two drives, while formatting and installing the WIN7 O.S.?  People tell me that there is a chance of the OS installing sometimes on the other drives.
    Also, if I want to change the now present boot drive Local disk letter (C) to my storage drive (G) and the other two drive letters, can I do this in manage disks, anytime, or only during windows setup install?
    Thx

      I've never had this much trouble hooking up a HDD.
           I have two IDE DVD/CD ROMS.  (My RAID MODE was IDE in XP OS, and still is with WIN7.)
           I have three SATA HDD's.
    After unplugging the SATA 2TB HDD while I installed the WIN7 OS on the 500 GB HDD (it was on the 74 RAPTOR, but I moved location, and made absolutly sure nothing went on my raptor)
      So today I decided to re-hook up the 2TB Storage HDD, and when I did, I went into bios,and to the cell menu, and LOAD ALL DEFAULT SETTINGS, so it could see my newly installed HDD,which I had all my backup Data from the previous HDD. I also checked and the RAID MODE was IDE, and the boot sequence was the WDC 500GB Boot/OS drive, rebooted,then I got that annoying blanked out screen with that blinking cursor, so I got back into the bios,and changed the 1st boot to the IDE Pioneer DVD/CD ROM, 2nd boot to the 500GB HDD, and rebooted again..still got that blinking cursor.
    I opened up the Mobo, checked and replugged all SATA, and power cables to the three HDDS, tried it again,then still got the blinking cursor.  Seems no matter what I change in the boot sequence,it never wants to boot properly
    ....AND THEN,
     I started with TAB > POST> started WINDOWS, then once it opened up, I went to manage Disks, saw all three HDDs were online and healthy.  Win. Explorer also listed them in that folder, in device manager, it listed all three too.
     The managed window showed this:
    74GB    (system,active,Primary partition)                       Storage
    2TB     (Primary partition)                                           Excessive Storage
    500GB  (Boot, page files,crash-Dump, Primary partition)   Operating system
    Both the PCI IDE BusMaster and ON-Chip SATA Controller were both ENABLED.
    Before I just got online, I tried RESTART, and it opened Windows the usual way,  so I hope I don't have any more problems. It worked fine BEFORE I just plugged in the 2TB HDD back in.
    I pretty much did what everyone suggested,except for leaving in the 74GB Raptor when I installed WIN7, which prompted me to format the drive prior to installing the OS.  Also, when I changed the IDE, RAID,and AHC1, to the AHC1 Mode, just before I installed Window7, like a few suggested, I also had problems, so after the install, I went back and changed it back to IDE.  My Floppy was an IDE, but I removed it from my system, and disabled in BIOS, but even a few times I went into Bios and saw that thje floppy was 1st Boot, even though I changed to either the DVD/CD Rom, or the 500GB boot drive.            
    So what is the preferred boot sequence?   

  • Problems installing plug-ins (and even Adobe updates) to Photoshop CS5 Extended on a new Win7 64-bit laptop.Instead, a message box pops up on the CS5 screen saying "could not complete your request because it is not the right kind of document."

    Problems installing plug-ins to Photoshop CS5 Extended on a new Win7 64-bit laptop.  (Same CS5 and plug-ins installed OK several years ago on a Vista laptop.  Now I'm just trying to migrate everything over to the new laptop.) Even some Adobe updates won't install.  Instead, a message box pops up on the CS5 screen saying "could not complete your request because it is not the right kind of document."   Any solution?

    CS5's automatic update mechanism is broken, perhaps because it is no longer updated and can't cope with the newer ways of updating.
    So this means you will have make a list of the updates that failed, go here: Product updates
    and manually download/install from there.
    Gene

  • ITunes Win7 64-bit won't open older library

    Updated iTunes on Win7, 64-bit laptop and it now won't open ... posts an error message of "can't open library file created with older version". I performed the upgrade on my XP-Pro 32-bit laptop with no issues, and a clean upgrade/update of my iPhone. Can't get it to work on the Win7 64-bit machine and, yes, I did indeed download the correct version of iTunes for Win7, 64-bit. I'm thinking the older version on the Win7 machine was not kept up and got too old to upgrade ... is that a possibility?

    Just tried this after itunes crashed consistently - wouldn't open.
    NOW I can sign the license agreement but get the message : "The iTunes library .itl file cannot be found or created. The default locatioin for this file is in the iTunes folder in the Music folder.
    I can do a search for the most recently saved .itl iTunes library (from 10/18, sigh). But I can't figure out where to put that once I find it.
    Any help? Thanks!

Maybe you are looking for