Thunderbolt Mac Mini with 2 Thunderbolt Displays

Hi,
Is it possible to connect 2 Apple Thunderbolt Displays to the new Thunderbolt Mac Mini, through daisy chain?
Thanks!

Here's from the Apple support doc's:
http://support.apple.com/kb/HT4885
They specifically list that the higher end graphics on the Mac Mini's can not only handle (2) TB displays, but also use the HDMI port as well...

Similar Messages

  • Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

    Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

    haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

  • Can I use my iMac with a thunderbolt connection as an Display for my new Mac Mini with thunderbolt ??

    Can I use my new Mac Mini with Leopard and thunderbolt in connection with my new iMac as a display ?

    If it's a 27" iMac. I don't believe Target Display Mode is supported on the 21" model. But not with a Mac Mini running Leopard. It would need to be running Lion.

  • Using two mac minis with one display (not 2 at the same time)

    I have a mac mini late 2009 and am going to purchase the 2011 one but was wondering if i could connect them both to my studio display so i dont have to keep swaping the cable around every time i want to use one of them.
    Thanks In Advance

    how about using _*Screen Sharing*_ ?
    i'm running my mini headlessly and use the screen sharing option on my iMac when necessary to admin it.

  • I am going to buy a mac mini i7 with 3 thunderbolt displays for forex trading. the question is if i use bootcamp and run windows on the mac mini will the displays still run the same way as if i was running it on Lion?

    I am going to buy a mac mini i7 with 3 thunderbolt displays for forex trading. the question is if i use bootcamp and run windows on the mac mini will the displays still run the same way as if i was running it on Lion?

    No idea if Windows will do it, but you can run Windows without Bootcamp & have OSX available at the same time, which should give you all the Monitors that OSX uses.
    Parallels...
    http://www.parallels.com/
    VmWare Fusion...
    http://www.vmware.com/mac

  • Anyone having Audio Issues with new Mac Mini, new Thunderbolt Display and new Pegasus R4?

    I can't listen to the built-in speakers on my brand new Apple thunderbolt monitor to the terrible audio quality.  I'm running Mac Lion on a new Mac Mini with a brand new Promise Pegasus R4 - all purchased in January 2012.   The entire setup is connected via Thunderbust errh, I mean Thunderbolt. 

    Hi,
    I'm also having an audio problem, which I suspect now is caused by my Thunderbolt display.
    See https://discussions.apple.com/message/21499606#21499606 for the small thread.

  • 3 DVI monitors with Thunderbolt Mac Mini

    Is it possible to have 3 DVI monitors with Thunderbolt Mac Mini?

    Maybe.
    The first could be via a Mini Displayport to DVI adapter
    The second could be via a HDMI to DVI cable
    The third would have to be via a Displaylink USB adapter
    It should be noted that the AMD powered Mac mini 2011 model will handle this workload better.

  • Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

    Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
    im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
    is there a way to put the IMacs into display mode with out logging into my Mac mini first
    or is there a portable monitor that I can use that will not require me to login first

    This
    Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
    says:
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
    How do I exit TDM?
    To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
    Can I use a third-party keyboard or older Apple keyboard to enable TDM?
    Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

  • I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

    I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

    Well, I really would love the new unreleased mac pro however , I'm not sure of the expected cost , Everyone speculates from $3,000 to $8,000, in which I may have to wait a while to purchase.
    To the point .... I want fully functional thunderbolt ports to be on the current mac pro's .... wonder if anyone had workarounds yet?...  or could I chain the the current mac pro to a mac mini to make that happen?

  • Mac mini with a 24" display or a new iMac 24"?

    Hi,
    Since Apple releases the new iMac, and at the same time, updated the mini, I'm wandering where my heart should go.
    I like the iMac, a little bit more powerful, better video card and not sharing memory with main memory, better BTO (bigger HD, faster HD too, memory, etc) iSight and mike, and so on so on. I have not seen one yet, but I'm still puzzled by the glossy screen. Many article I read said that it is a like or not based on personal taste and environment you put it in. I bought a Sony display 2-3 years ago, which I returned, because of the glossy screen. The images were very clean and very fun too work on, but I could not endure to see my face in the screen continuously. That's what I'm afraid about the new iMac.
    So far so good, I read the article on http://www.macworld.com that compare the new mini C2D with an iMac, and while it is less performant it is still a good performer. Only a few points below the iMac. So...
    Choosing a mini with a 24" of my choice with the same resolution as the iMac will cost me around the same (maybe a few hundred $ less), but I'll have a smaller/slower HD and not a dedicated video card. I'm wandering if the larger screen resolution will affect the mini performance? Sure, for the HD space, I can use an external HD on firewire. Maybe even boot from it and use the internal and slower disk for backups (like TimeMachine for instance).
    I do not play game, or very occasionally, I'm doing iLife/iWork stuff, and Internet surfing. I want the larger screen, as I like to have spaces to play with, but I'm afraid the mini will suffer the higher resolution.
    In the long run, the display will stay mine, when I ever decide to change my computer, while buying the iMac mean I'll drop the display and buy a new one. There's pros and cons to all of this...
    So I'd like to heard from people having the new (or even older) mini to let me your impression of what you feel about this.
    Thanks in advance.

    If you are not able to actually examine an iMac carefully before you buy, the risk that the glossy screen may not suit you is a real issue which has to be considered. Imagine that you bought one and found it to have the same problem as the Sony display you tried and had to return?
    Ultimately, the actual performance of the system is remarkably unimportant in most situations. The majority of users and uses would not show markedly different operability between a brand new Mac Pro and older G5, even though in terms of specification and benchmarking, the two are like chalk and cheese. The fact is that while the Mac Pro would be greatly faster, OS and software, not to mention the user him or herself, are all quite inefficient.
    What that means is that the difference in performance between the iMac and the mini is certainly measurable, and in use would show itself in some ways (the iMac would run smoother for example) but without the ability to sit them side by side, as a user you'd really never know. Bearing in mind that the new minis are way faster than the old G5s which were themselves screamingly fast when they were in production (and still are), it's hard to imagine that a mini would fail to impress.
    And since the actual performance of the system isn't all that crucial, what IS vital is to ensure that the system you buy is usable. The devices that matter most in that respect are the bits you, as the user, interface with. Keyboards and mice are reasonably cheap and easy to change, but displays are not when they are fixed and integral to the system.
    The downside of the mini is twofold: Firstly that the internal drive is 5400rpm, thus relatively slow. In reality this really doesn't matter all that much, particularly not if you go for 2Gb RAM. It's been criticized for it's speed, but on the other hand, it's the same as the best laptops, users of which don't seem to have problems with the drive speed. It can be got around of course with a fast external drive, used to boot the system.
    Secondly, the integrated graphics - not because that's really limiting in any absolute sense (except for gamers) but because as time goes by, more and more of the top-end software is likely to exclude systems with integrated graphics from their minimum specification list. There aren't many like that yet, and it's hardly likely to be a widespread problem, but it does mean you have to consider what software you want to run as part of the equation.
    If I were in your situation, I'd not consider spending money until I had looked at the iMac and given myself some time to work with one. The fact it has a glossy screen doesn't mean it WILL have the same problem as the Sony display had, and slight changes in the ergonomics of your desk with the iMac on it rather than the system with the Sony display previously may mean that even if it did prove reflective, it may be far less of a problem (or more of course). I would look to buy the best system with the best specification that fit within my budget (after all, it has to meet your needs for some time, even as they change), thus if the iMac screen was good, that would be the system I'd go for. If there were any sense that the reflective properties of the screen were going to be a problem, I'd dismiss it as an option immediately, and focus on either the lowest cost Mac Pro if one of those were within the budget, and if not, a Mac mini with bumped up RAM and your choice of screen.

  • I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

    I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

    Hello, since nobdy else has replied...
    Long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

  • No video signal in remote connection with Mac mini when the display is off

    No video signal in remote connection with Mac mini when the display is off

    So you mean that Mac mini is different than other ordinary computer and is need an active display to avoid black screen in remote session!!!!!Oh my god, Steve would be embarrassed!

  • Hi I have a mac mini with my TV as a display. MY display includes the taskbar but no menu bar, how do I see menu bar???

    HI
    I have a mac mini with my TV as a display. My display includes the taskbar but no menu bar, how do I see menu bar???

    Make sure you are using a 1080p capable TV.   Some TVs have pixel level video ratio adjustment.  Sometimes that can force the menubar to be visible if it is the only display connected to the machine. Sometimes you have to go to your hard drive's Applications -> System Preferences -> Displays and drag the white bar on top of the display's representation to the other display.  You can only have one primary display with menubar.
    Lastly, for non-1080p capable displays, DisplayConfigX or SwitchResX offer pixel level adjustments through software.

  • I have just bought an ipad mini with ret.display, I wish to link up my Mac Book Pro (10.6.8 system) to iCloud. In system preferences there is no iCloud icon to select. How do I get my MacBook updated to accept iCloud.

    I have just bought an ipad mini with ret.display, I wish to link up my MacBook Pro to icloud with my ipad, but my MacBook doesnt have an icloud icon in system preferences. How do I upgrade my MacBook to accept iCloud link.

    See -> Mavericks System Requirements.
    Most of us are running Mavericks with no problems - others seem to be having various problems (if you check out the Mavericks forum). But I would recommend that you have a current backup whichever way you go.
    Clinton

  • Can I use Mac Mini with an S-video input?

    I'm considering a Mac Mini because I have a young child who is mostly blind, but is at the age where he needs to start learning to use a computer.  I want to go with Apple (I have been PC my whole life) because of the excellent VoiceOver features baked into the OS--- Windows doesn't have anything comparable.
    I'd like to wire this thing up to my HDTV, because my child does have some vision and the 52" screen will actually provide useful images to him; but it's a nearly 15 year old HDTV that does not have an HDMI input, just S-Video and RCA plugs.
    Is there an acceptable adapter out there that will allow me to use the Mac Mini with S-video or RCA plugs without having to buy a new 50+" TV just for the Mac Mini?

    I found this.
    http://www.ebay.com/itm/USB-PC-MAC-VGA-to-TV-Composite-S-Video-Adapter-NTSC-PAL- /260775797195
    You may be able to find others by more Googling
    You will also need a mini-display port to VGA adopter for the Mini. It plugs into the Thunderbolt port on the Mini

Maybe you are looking for

  • PL/SQL procedure--------------please help----what is it ?? explain brief

    (TO_DATE('&2')-1) CREATE OR REPLACE PROCEDURE GAT_SVC_ACTIVITY(REFDATE IN DATE:=SYSDATE-1, MSK IN INTEGER:=31) AS --DECLARE V_COUNT NUMBER :=0; V_LIMIT NUMBER :=0; V_SOURCE_SITE_ID NUMBER :=0; V_SOURCE_SITE_ID_N NUMBER := NULL; V_CUSSOR INTEGER; V_PR

  • How to cancel an outgoing message

    I decided to email a video to my sister from my iphone 3g, that was 2 days ago. It is still trying to send it and I don't know how to cancel it. Does anyone know how. Now my phone keeps beeping and vibrating and coming on all by itself.

  • "Reports" field in Incident Management workcenter

    Hello All, I have a silly question. Ther eis a Reports Tab in Incident management workcenter. In overview tab, I can see there are 10 msg in confirmed status and 3 in proposed sol,etc.. But when I open the Reports Tab, I can see under" Messages for p

  • PC to Mac Transition help!

    Hi- I bought a pc about a year ago which I regret and would like to try out Mac. now I've got 3x1TB hdd and 1x60gb ssd. If purchase Mac pro would I be able to use these hdd along with rams and video card and moniter and put additional cpu. Specs are

  • Problem following bpelx:append

    In my bpel .wsdl file, I have imported an xsd file. I have created an element <panel-member> from a type in the xsd file. There is an array of this type as part of a web service method message I want to invoke. I have gone through an array of element