Thunderbolt Monitor causing severe lag in FCPX 10.1.2 - Help!

So, I have been using final cut X for a while with a 2012 Retina MBP connected to a thunderbolt G-raid and the apple thunderbolt monitor. I have had sevre lag and beach balling in FCPX every single time its plugged into my thunerbolt monitor - however when the laptop is no connected FCPX runs much much smoother.
I obviously would like to use my 27inch amazing thunderbolt monitor and not have to settle for something else - unless there is something that is better at this resolution for editing?
Help!!!!

Are you connecting the Thunderbolt display to the Mac to use for mirroring or are you only use the Thunderbolt display for FCPX editing?
I don't use mirroring on purpose as it tends to slow OS X down a bit.
Also, this way you are not powering the Mac and Thunderbolt display at the same time. I use the adapter that came with my MB Air for that.
And try here > Thunderbolt ports and displays: Frequently asked questions (FAQ)

Similar Messages

Why is my 8minute iMovie using 15g of storage and causing severe lag in the program?

Ive never used iMovie before but started playing with my photos and videos and was happy with how easily i could blend them together with music from iTunes and cute little transitions. The frustration came when I started running out of space on my macbook pro. I had around 15g of storage left and after about an 8minute video, was getting notifications that my start-up disk was almost full. WHAT?!?!?! these are all clips and vids imported from my iphone. Im not too technically savey when it comes to stuff like this but how is it that a few small photos and movie clips blended with a little bit of music is eating so much of my computer's storage? Also, the program became very laggy and started to disfigure the top status bar. All the words are messed up and jumbled. Why am I having this issue???? It’s extremely aggravating!!!!!

It is normal that the render files are around 5 times larger than the raw movie files. Unlike the raw files they are not compressed in order to make editing and playing in the veiwer faster. I would recommend that you put your iMovie libraries on an external disk.
Geoff.

Macbook 2011 severe lag and spinning ball

Hi
I recently re-formatted and re-installed os x on to my mbp due to severe lag, everything i did resulted in the spinning ball.
It's still the same so i performed an etrecheck, here are the results, does this mean my disk is fried? Any help greatly appreciated, thanks!
EtreCheck version: 2.1.5 (108)
Report generated 22 December 2014 17:28:11 GMT+7
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1680 x 1050
AMD Radeon HD 6750M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:38:8
Disk Information: ℹ️
Hitachi HTS725050A9A362 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Rob (disk1) / : 498.88 GB (485.34 GB free) - 12 errors
Core Storage: disk0s2 499.25 GB Online
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
Default Browser: Version: 600 - SDK 10.10
QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      12% mds
      12% Safari
      9% com.apple.preferences.users.remoteservice
      4% System Preferences
      2% WindowServer
Top Processes by Memory: ℹ️
241 MB Safari
175 MB com.apple.WebKit.WebContent
112 MB Finder
112 MB WindowServer
77 MB Spotlight
Virtual Memory Information: ℹ️
3.73 GB Free RAM
3.18 GB Active RAM
496 MB Inactive RAM
1.17 GB Wired RAM
928 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 22, 2014, 05:28:12 PM /Users/[redacted]/Library/Logs/DiagnosticReports/AppleSpell_2014-12-22-172812_[ redacted].crash
Dec 22, 2014, 05:25:37 PM /Library/Logs/DiagnosticReports/PluginProcess_2014-12-22-172537_[redacted].cras h
Dec 22, 2014, 04:59:14 PM /Library/Logs/DiagnosticReports/PluginProcess_2014-12-22-165914_[redacted].cras h
Dec 22, 2014, 04:58:26 PM /Library/Logs/DiagnosticReports/PluginProcess_2014-12-22-165826_[redacted].cras h
Dec 22, 2014, 04:55:35 PM /Users/[redacted]/Library/Logs/DiagnosticReports/AppleSpell_2014-12-22-165535_[ redacted].crash
Dec 22, 2014, 04:54:35 PM /Users/[redacted]/Library/Logs/DiagnosticReports/AppleSpell_2014-12-22-165435_[ redacted].crash
Dec 22, 2014, 04:53:49 PM /Library/Logs/DiagnosticReports/PluginProcess_2014-12-22-165349_[redacted].cras h
Dec 22, 2014, 04:51:51 PM /Users/[redacted]/Library/Logs/DiagnosticReports/AppleSpell_2014-12-22-165151_[ redacted].crash
Dec 22, 2014, 04:50:41 PM Self test - passed
Dec 21, 2014, 08:45:39 PM /Library/Logs/DiagnosticReports/PluginProcess_2014-12-21-204539_[redacted].cras h
Dec 21, 2014, 08:19:31 PM /Users/[redacted]/Library/Logs/DiagnosticReports/AppleSpell_2014-12-21-201931_[ redacted].crash
Dec 21, 2014, 08:14:18 PM /Library/Logs/DiagnosticReports/PluginProcess_2014-12-21-201418_[redacted].cras h
Dec 21, 2014, 08:03:39 PM /Library/Logs/DiagnosticReports/PluginProcess_2014-12-21-200339_[redacted].cras h
Dec 21, 2014, 08:03:02 PM /Users/[redacted]/Library/Logs/DiagnosticReports/AppleSpell_2014-12-21-200302_[ redacted].crash
Dec 21, 2014, 08:02:10 PM /Library/Logs/DiagnosticReports/PluginProcess_2014-12-21-200210_[redacted].cras h
Dec 21, 2014, 04:33:22 AM /Users/[redacted]/Library/Logs/DiagnosticReports/AppleSpell_2014-12-21-043322_[ redacted].crash
Dec 21, 2014, 04:25:52 AM /Library/Logs/DiagnosticReports/softwareupdated_2014-12-21-042552_[redacted].cr ash
Dec 21, 2014, 04:25:52 AM /Library/Logs/DiagnosticReports/UserEventAgent_2014-12-21-042552_[redacted].cra sh
Dec 21, 2014, 04:25:42 AM /Library/Logs/DiagnosticReports/softwareupdated_2014-12-21-042542_[redacted].cr ash
Dec 21, 2014, 04:25:42 AM /Library/Logs/DiagnosticReports/UserEventAgent_2014-12-21-042542_[redacted].cra sh
Dec 21, 2014, 04:25:32 AM /Library/Logs/DiagnosticReports/softwareupdated_2014-12-21-042532_[redacted].cr ash
Dec 21, 2014, 04:25:31 AM /Library/Logs/DiagnosticReports/UserEventAgent_2014-12-21-042531_[redacted].cra sh
Dec 21, 2014, 04:25:21 AM /Library/Logs/DiagnosticReports/softwareupdated_2014-12-21-042521_[redacted].cr ash
Dec 21, 2014, 04:25:21 AM /Library/Logs/DiagnosticReports/UserEventAgent_2014-12-21-042521_[redacted].cra sh
Dec 21, 2014, 04:25:11 AM /Library/Logs/DiagnosticReports/softwareupdated_2014-12-21-042511_[redacted].cr ash
Dec 21, 2014, 04:25:10 AM /Library/Logs/DiagnosticReports/UserEventAgent_2014-12-21-042510_[redacted].cra sh
Dec 21, 2014, 04:25:00 AM /Library/Logs/DiagnosticReports/softwareupdated_2014-12-21-042500_[redacted].cr ash
Dec 21, 2014, 04:25:00 AM /Library/Logs/DiagnosticReports/UserEventAgent_2014-12-21-042500_[redacted].cra sh
Dec 21, 2014, 04:24:50 AM /Library/Logs/DiagnosticReports/softwareupdated_2014-12-21-042450_[redacted].cr ash
Dec 21, 2014, 04:24:50 AM /Library/Logs/DiagnosticReports/UserEventAgent_2014-12-21-042450_[redacted].cra sh
Dec 21, 2014, 04:24:40 AM /Library/Logs/DiagnosticReports/softwareupdated_2014-12-21-042440_[redacted].cr ash
Dec 21, 2014, 04:24:39 AM /Library/Logs/DiagnosticReports/UserEventAgent_2014-12-21-042439_[redacted].cra sh
Dec 21, 2014, 04:24:29 AM /Library/Logs/DiagnosticReports/softwareupdated_2014-12-21-042429_[redacted].cr ash
Dec 21, 2014, 04:24:29 AM /Library/Logs/DiagnosticReports/UserEventAgent_2014-12-21-042429_[redacted].cra sh
Dec 21, 2014, 04:24:19 AM /Library/Logs/DiagnosticReports/softwareupdated_2014-12-21-042419_[redacted].cr ash
Dec 21, 2014, 04:24:18 AM /Library/Logs/DiagnosticReports/UserEventAgent_2014-12-21-042418_[redacted].cra sh
Dec 21, 2014, 04:24:08 AM /Library/Logs/DiagnosticReports/softwareupdated_2014-12-21-042408_[redacted].cr ash
Dec 21, 2014, 04:24:08 AM /Library/Logs/DiagnosticReports/UserEventAgent_2014-12-21-042408_[redacted].cra sh
Dec 21, 2014, 04:23:58 AM /Library/Logs/DiagnosticReports/UserEventAgent_2014-12-21-042358_[redacted].cra sh
Dec 21, 2014, 04:23:58 AM /Library/Logs/DiagnosticReports/softwareupdated_2014-12-21-042358_[redacted].cr ash
Dec 21, 2014, 04:23:48 AM /Library/Logs/DiagnosticReports/softwareupdated_2014-12-21-042348_[redacted].cr ash
Dec 21, 2014, 04:23:47 AM /Library/Logs/DiagnosticReports/UserEventAgent_2014-12-21-042347_[redacted].cra sh
Dec 21, 2014, 04:23:38 AM /Library/Logs/DiagnosticReports/softwareupdated_2014-12-21-042338_[redacted].cr ash

Even without knowing how much RAM you have, it certainly sounds like either too little or a bad stick. Remember that Rosetta likes RAM. The more the merrier.
It could also be that something is hogging your CPU cycles. As suggested, open up your activity monitor (located under applications -> utilities) and check both CPU activity and memory usage. Be sure to open the drop box and select "all processes" not just "my processes."
Apps running under Rosetta are not the only possibilities. Look for anything that is taking up large amounts of RAM or CPU cycles.

Daisy Chain a second Monitor to Thunderbolt Monitor

I purchased a new Dell S2040L HDMI Monitor and I would like to Daisy Chain to my Thunderbolt. I plugged the Dell Monitor into the back of the Thunderbolt monitor and my Mac Book Pro (OX Version 10.9.4) will not reconize the Dell monitor as a second monitor. Is there a display setting that needs to be changed?

You could use a USB to DVI converter
<http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/>
but performance will be severly limited by USB and some functions won't work
<http://www.displaylink.com/support/mac_downloads.php>
"Please note: This driver does not support 3D acceleration. Some features of Mac OS X-based applications that require hardware OpenGL acceleration, such as Keynote presentations and iPhoto* slideshows, will not function properly."

Clips from Project bin to source monitor causing video output to go out of sync(CS6 and CC)

Any footage I double-click or drag from the Project window to the Source monitor causes my video output to go out of sync. When I put the clips in the timeline, video goes back in sync and I'm able to view video output. My monitors are connected to a Blackmagic Intensity Shuttle Thunderbolt(9.7.5) via component and HDMI. Is this normal behavior in Premiere or is there a setting to enable this? No issues doing this in FCP7(clips from Project window to Canvas).
Can someone with an I/O from AJA, Matrox, or Blackmagic please test this out for me. Thanks...
2012 Macbook Pro
MacOS 10.8.3

Hi Joe,
How do you have your audio setup? Try the following.
- Set your OS system sound to Built-in or Line out audio
- Select Blackmagic for both Video and Audio in Preferences> Playback
- Select System Default Input/Output from Preferences> Audio Hardware
Hope this helps,
Peter Garaway
Adobe
Premiere Pro

Do we have any method to list out the servers that are critical and the component/monitor causing the server to turn into critical state in SCOM 2012

Hello Team,
We are monitoring 1000 servers in our environment and out of 1000 servers, we have approximately 100 servers showing as critical state on the server state view.
We can get the critical servers list from SCOM console, but we are not able to get the information about the component responsible for the server to be critical. Using Health explorer to find the root cause for 100 servers is really impossible and time consuming.
Do we have any method to list out the servers that are critical and the component/monitor causing the server to turn into critical state?
Advance thanks for your help.
Regards,
Dinesh
Thanks & Regards, Dinesh

Hi,
As far as I know alerts with severity as criticla may cause windows computer in a critical state, we can try below code to find all critical alerts：
get-alert -criteria 'ResolutionState=0 AND Severity=2' | select Name,ResolutionState,TimeRaised | export-csv c:\Alerts.txt
Criteria Syntax http://msdn.microsoft.com/en-us/library/bb437603.aspx
Values to use.
Resolution State
Severity Values for Alerts
0 = New
0 = INFORMATIONAL
255 = Closed
1 = WARNING
2 = CRITICAL
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

"feeds and updates" widget causing major lag since froyo

Hey guys,
Ive noticed that ever since I downloaded the Froyo OTA update last week, the "feeds and updates" widget is causing MAJOR lag issues. It takes several seconds to move from that screen that the widet is on, and trying to scroll through the widget is VERY slow and choppy. I have tried both the soft reset and the hard reset, without any improvement. If I remove the widget from the screen, my phone gets significantly faster, and the lag pretty much disappears, so Im pretty sure its that widget causing the problem. Has anyone else noticed this problem, and if so, is there any way to fix it? I like using that widget for my facebook updates, and want to keep it!

Kizersosei wrote:
I have a Samsung Galaxy S Fascinate and since the Froyo 2.2 OTA update last week, my phone turns into a brick as soon as I add my Facebook account to the Feeds and Updates widget. The screen locks up, I can not scroll the wall up and down, and scrolling the screens left and right takes forever; they freeze between screens and everything lags to the point where the phone becomes useless. I powered the phone down and up, took the battery out, no remedy. A hard reset on the phone will make the phone usable again, but as soon as I add Facebook back to the Feeds and Updates widget, the phone starts locking up again. Called Verizon and they reached out to Samsung who thought there was a glitch during the download of the 2.2 software, so Verizon sent me a replacement phone of the same make and model. As soon as I activated it, it told me Froyo 2.2 was ready to be downloaded to the phone for updating. Did that, everything was working fine UNTIL I added my Facebook account to the Feeds and Updates widget; the phone started lagging and locking up as the previous one did. I'm waiting to talk to Level 3 support with Samsung as I write this. Please note, if I reset the phone and don't add my Facebook account to the Feeds and Updates widget, the phone is usable. However, I did notice that in Vibrate Mode with text message and email notification, the vibration barely lasted a millisecond; I could not feel the vibrations in my pocket. In my opinion, this 2.2 update is flawed and needs re-working. I had no issues with this phone with the 2.1 software, and would prefer to go back to it if possible until 2.2 is fixed or another, non-buggy update is released for this phone.
If that is your wish for now, I see no problem in you going back to 2.1. Verizon support should be able to provide you with that os. Just be sure you don't then check for any new updates.

Daisy-Chain Thunderbolt Monitors

I have been having a lot of issues since purchasing two new thunderbolt displays. I mounted both displays on my office wall via VESA brackets. I was super happy with how they looked and how they were able to Daisy-Chain together making them the most beautiful full function docking station for my MacBook Pro. I hooked up my mac via the single thunderbolt cable and power cord from monitor 1 and turned on my Mac. As expected the two monitors came to life in dazzling fashion giving me 54in of usable space. My issues began after I disconnected my Mac to go to a meeting. When I returned and reconnected the power and thunderbolt cords and after the usual blinking of the monitors only the Mac and monitor number 1 worked. Monitor 2 (the one daisy-chained to number 1) would not turn on, 27in of blackness. I tried reconnecting, changing the order of the displays, rebooting, and even re-imaging; nothing worked. I Googled it and found a lot of issues that people were having with displays and thunderbolt drives but none offered a solution that worked. after a lot of research I was able to piece together what was happening and a fix that actually worked. The issue is the Thunderbolt ports and they way peripherals get assigned. So the first time I connected the monitors they worked great but when I went to a meeting and connected to a projector or went home and connected to my single thunderbolt monitor there the ports would get reconfigured to run the single monitor or projector. Macs use SMC (System Management Controller) to control many low level functions like lights, fans, power button, and ports. http://support.apple.com/kb/HT3964 Following the SMC reset fixes the port assignment issue and allows the Mac to recognize the daisy-chained monitor or drive. One additional tip is to plug in the power and thunderbolt cable before resetting the SMC. it is a simple keyboard procedure that is easy and works every time. I hoping a firmware update of SMC will make this fix obsolete but until then at least my $2500 display investment is paying off in a lot of beautiful useable space.

Please do not double post - it does not help and things can get very confusing, so I've asked the hosts to remove the duplicate.
Good luck!

Dual Monitor Causing System Problems?

Hi, I'm new to this site, so I hope this is where I ask this question! My design group switched to G5/Cinema Display screen from old g4 setups mid 2005. I retained my Mitsubishi Diamond Pro 2020u monitor to use as a secondary display for pallettes, extra files, etc. It's hooked up using a dvi-vga adapter.
My new G5 had hiccups from the start, but around March 2006 I started getting Kernel Panics almost every week, serious slow-downs, Adobe app crashes, etc. It got to the point that I was troubleshooting every week, but could never put a finger on exactly what was happening. IT archive-installed 10.4.4 after we discovered the system had been updated to 10.4.6 and we thought that would solve the problem. While that solved the issues that were relevant to 10.4.6 glitches, it didn't fix everything and little, persistent problems remained, including stalls, crashes and kernel panics. After removing suspect fonts, wallpaper, icons, updating software, repairing permissions, tossing preferences, and other troubleshooting over and over, we (I.T.) finally switched my cpu to another one in the department using data migration (just my user information, not software or other files). Still the same hiccups and even new glitches appeared (InDesign crashing on spellcheck, Photoshop not granting me access to save changes to files, etc.), including two more Kernel panics (within 5 minutes of each other) in the two weeks since we switched hardware. More troubleshooting fixed the app-specific problems, but there are still the persistent annoyances occurring.
I again did all the troubleshooting mentioned above and finally someone mentioned that I'm the only designer in our group using a dual display set-up. Could there be validity to the non-cinema display monitor causing these problems and if so, what is the solution? I've disconnected the second monitor for now, but would love to have it back. Also, we work with a server (for instance, the kernel panics only happen when I try to place a file from the server into InDesign CS2 using the place command, so there's another avenue to go down if the monitor isn't the issue.)Thanks!
G5 Mac OS X (10.4.4) graphic design applications
G5 Mac OS X (10.4.4) graphic design applications
G5 Mac OS X (10.4.4) graphic design applications

I only just disconnected the monitor, so it will take time to tell if that's a factor. As for the kernel panics, although it's always the same scenario (placing images from server through InDesign) they happen very randomly; it's not happening every single time I place a file. In fact, I just placed an image on the server into an ID doc I have on my desktop, no problem. So I can't say for sure that it has happened when working from my desktop or only when working on the server.
G5 Mac OS X (10.4.4) graphic design applications

HT5219 how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX

how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX

Did you try to hook up both monitors to the Belkin adaptor? Trying will determine if your monitor has a bad input port. See if the Belkin adaptor is the problem. I have never used that specific adaptor, but I have always had luck with the Dr. Bott's DVI for ADC adaptor. Best of luck.
www.drbott.com

MacBook Pro does not sense external monitor (Panasonic HDTV in my case) via thunderbolt-HDMI connection...Is update 10.8.3 helping anyone?

My MacBook Pro (newest model in 2013 so far) does not sense external monitor (Panasonic HDTV in my case) via thunderbolt-HDMI connection...Is update 10.8.3 helping anyone else who has this issue? I returned my multiple HDMI adapters after figuring out it had to be an Apple issue n not the adapters so I can't check it myself now.
Thanks!

I have late 2012 MBP 13" and connect to my Panasonic Plasma correctly.
But using the same cable, can't connect to an LG 47LM6200, the MBP detects the TV, the screen blinks blue, but the TV shows "no sinal detected" message.

Connet a thunderbolt monitor and min display port monitor to a mac mini

I have a new late 2012 Mac Mini. I also have an exisiting Apple mini display monitor and just got a new Apple thunderbolt monitor. How do I get these both to work with this Mac Mini so I can have dual monitors? I read something about an external thunderbolt drive. How would that work and what product should I buy that has all the ports on the back? Thank you for the help.

Unfortunately a Mini Displaport monitor will not work when connected via a Thunderbolt display. Nor will a Thunderbolt display work via a Mini Displayport monitor.
See http://support.apple.com/kb/HT5219
You could use a DVI or HDMI monitor in addition to the Thunderbolt display, or you could use two Thunderbolt displays. You could sell your old monitor and buy another new one.

Can the last link in a thunderbolt daisy-chain be a non-thunderbolt monitor using miniDisplay port?

Can the last link in a thunderbolt daisy-chain be a non-thunderbolt monitor, using miniDisplay port?
For example, Mac mini <--> external SSD <--> apple cinema display 30" (using miniDisplay port adaptor plugged into the SSD's second thunderbolt port)

TechnoMax wrote:
for instance STAE122 or STAE 127?
FWIW, STAE129 is the current version TB adapter
that is self powered and has TB daisy chain port.
STAE122 and STAE127 are older versions and
not the current model, though there may be stock of
these around. As to whether this will solve your issue,
I don't know.
Can I trick the Mac under Bootcamp as OS to use HDMI for the monitor? Dell officially says that the monitor can only accept 1900x1080 over HDMI, but some have fiddled wth different computers with custom settings that worked with some Monitors but mostly under Linux and to Dell 2711.
The MacMini HDMI port is hardware limited to 1980x1200.

Daisy Chaining Thunderbolt Monitors

I see that a 15 inch Macbook can drive two daisy chained Thunderbolt monitors. Can a post 2012 Air Book also do this?
Going in another direction, if i use the 15 Inch Macbook with a thunderbolt monitor, can i daisy chain in a Cinema Display to that?

I see that a 15 inch Macbook can drive two daisy chained Thunderbolt monitors. Can a post 2012 Air Book also do this?
Yes. See question 14 in:
<http://support.apple.com/kb/HT5219>
Going in another direction, if i use the 15 Inch Macbook with a thunderbolt monitor, can I daisy chain in a Cinema Display to that?
Not directly (see question 16 above), but it will work if you connect a Thunderbolt disk drive (with two Thunderbolt ports) between the displays.

Thunderbolt Monitor causing severe lag in FCPX 10.1.2 - Help!

Similar Messages

Maybe you are looking for