Thunderbolt monitor wont start up.
I have a brand new macbook pro to a new 27 in monitor that is connected via thunderbolt. The monitor will start first thing in the morning for about 10 minutes and then shutdown I can't reboot the screen no matter how many times I restart my laptop.
Cheers
Deb
Kevin
Iit says "Darwin/BSD" and asks me to put in my longin name and passwordFollow the instructions in this post and post the results here.
Similar Messages
-
Dear all, this is frustrating. The system just wont start up, chimes and spins around but just goes up to the apple logo and that is it. I leftit in sleep mode all night by mistake and the following day refused to start. Any ideas pls? I've done all the suggestions to reset the pram/ram.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider. -
Thunderbolt monitor stopped working
Hi All -
I have a new retina MacBook Pro 13-inch and Thunderbolt monitor. The monitor worked fine for a couple of days and now it won't light up when I connect it to my rMBP. It's getting power ok and the pass-through USB ports (on the back are passing power). But when I connect to to my rMBP, the USB ports lose power (iphone stops charing and chirps) and the monitor is never recognized.
I fixed it one by unplugging the power plug on the rear of the monitor, then replugged it back in, but now that doesn't work either
I tried:
restarting the mac
shut down and restart
PRAM reset
both Thunderbolt ports
all combinations of Mac power/monitor plug in
Anyone else?
Thank you.One more symptom (yes, it's still dead) that I thought I'd share.
My Thunderbolt monitor passes power through to the connected MagSafe adapter no problem. It powers my MacBook fine, 100 percent of the time. But here's where it gets weird...
The USB ports on the rear pass power. I have a USB fan and a USB > Lightning adapter for my iPhone 5 plugged into the back of the monitor and both provide power -- UNTIL I plug the Thunderbolt plug into my rMBP13. As soon as I plug TB into my MBP, the USB ports on the rear lose power (fan turns off and iPhone stops charging). As soon as I unplug TB from my MBP the fan starts again and my MBP resumes charging (as noted by that distinctive chirp).
So I suspect that it's a defective monitor. It worked fine for about a week, then it was intermittant for about a week. Now the screen won't light up at all, and the USB pass-through ports are acting up too.
I think someone needs a trip to the genius bar. Which isn't trivial because it's mounted to a VESA adapter and an arm bolted to my desk.
(sigh) -
I have a 2013 Macbook Pro HD and use the Thunderbolt monitor. It's a great combo save for only one issue. The monitor starts to flash (black to standard screen). It gets so bad I have to unplug the Thunderbolt connector and replug it in. The only fix to stop it is to restart my Macbook pro. Even that doesn't always to the trick.
I have looked at blogs/Google searches for fixes and havent seen any.
Help!Try 'resetting' the Display instead of your MacBook Pro. Unplug it from mains and leave it unplugged for about 15 minutes and then plug back into mains.
If this doesn't fix the problem, then you need to take your entire kit into your local Apple Store/AASP.
Clinton -
All of a sudden Aperture wont start. I click the icon on the dashboard and an error pops up. I tried several times. I uninstalled Aperture and installed again. No result.
I know, it's in Dutch, but I think the type of error seemd formiliar. Here are the details:
Process: Aperture [976]
Path: /Applications/Aperture.app/Contents/MacOS/Aperture
Identifier: com.apple.Aperture
Version: ???
Build Info: Aperture-451099000000000~1
App Item ID: 408981426
App External ID: 107312636
Code Type: X86-64 (Native)
Parent Process: launchd [184]
Responsible: Aperture [976]
User ID: 501
Date/Time: 2014-04-18 20:28:22.068 +0200
OS Version: Mac OS X 10.9.2 (13C64)
Report Version: 11
Anonymous UUID: 6790C229-BD91-245B-3C98-152097B9DA9B
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
Reason: image not found
Binary Images:
0x7fff6d277000 - 0x7fff6d2aa817 dyld (239.4) <2B17750C-ED1B-3060-B64E-21897D08B28B> /usr/lib/dyld
0x7fff8a223000 - 0x7fff8a286ff7 com.apple.SystemConfiguration (1.13 - 1.13) <63B985ED-E7E4-3095-8D12-63C9F1DB0F3D> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x7fff8a291000 - 0x7fff8a3b3ff1 com.apple.avfoundation (2.0 - 651.12) <5261E6EA-7476-32B2-A12A-D42598A9B2EA> /System/Library/Frameworks/AVFoundation.framework/Versions/A/AVFoundation
0x7fff8b2fd000 - 0x7fff8b2fdfff com.apple.Carbon (154 - 157) <4E260C09-78F4-305B-B408-13321CAF6213> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x7fff8b3f4000 - 0x7fff8b3f9fff com.apple.DiskArbitration (2.6 - 2.6) <A4165553-770E-3D27-B217-01FC1F852B87> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x7fff8f5ab000 - 0x7fff8f646fff com.apple.PDFKit (2.9.1 - 2.9.1) <F4DFF4F2-6DA3-3B1B-823E-D9ED271A1522> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/PDFKit.framew ork/Versions/A/PDFKit
0x7fff8fb8d000 - 0x7fff8fde6ff9 com.apple.security (7.0 - 55471.14) <3F7100A0-FE46-333D-9A4B-396580F1B4FE> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x7fff912bb000 - 0x7fff913f1ff6 com.apple.WebKit (9537 - 9537.74.9) <CA0C0387-8A66-34D4-8B1C-F5CDDBDA76BB> /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
0x7fff918a7000 - 0x7fff918a7fff com.apple.CoreServices (59 - 59) <7A697B5E-F179-30DF-93F2-8B503CEEEFD5> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x7fff918ae000 - 0x7fff918aefff com.apple.Cocoa (6.8 - 20) <E90E99D7-A425-3301-A025-D9E0CD11918E> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x7fff91a04000 - 0x7fff91be9fff com.apple.CoreFoundation (6.9 - 855.14) <617B8A7B-FAB2-3271-A09B-C542E351C532> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff9218c000 - 0x7fff92328ff3 com.apple.QuartzCore (1.8 - 332.3) <80F1068F-4A34-34FB-9E05-A2DC0700D2F2> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x7fff92941000 - 0x7fff9294ffff com.apple.opengl (9.6.0 - 9.6.0) <709F4A02-73A0-303C-86B5-85C596C8B707> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x7fff93c04000 - 0x7fff93c04fff com.apple.ApplicationServices (48 - 48) <3E3F01A8-314D-378F-835E-9CC4F8820031> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x7fff95587000 - 0x7fff95818ff7 com.apple.AOSKit (1.06 - 176) <35525B2F-B02F-31FD-A3B2-FD6AE6D32C11> /System/Library/PrivateFrameworks/AOSKit.framework/Versions/A/AOSKit
0x7fff95a08000 - 0x7fff95a51fff com.apple.CoreMedia (1.0 - 1273.49) <D91EC90A-BFF1-300D-A353-68001705811C> /System/Library/Frameworks/CoreMedia.framework/Versions/A/CoreMedia
0x7fff95bbb000 - 0x7fff95c25ff7 com.apple.framework.IOKit (2.0.1 - 907.90.2) <A779DE46-BB7E-36FD-9348-694F9B09718F> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x7fff9623a000 - 0x7fff9623afff com.apple.Accelerate (1.9 - Accelerate 1.9) <509BB27A-AE62-366D-86D8-0B06D217CF56> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x7fff9683e000 - 0x7fff9689cff7 com.apple.corelocation (1486.17 - 1486.24) <9FBB29F0-E000-3190-A96C-9EAA5CCCA2A0> /System/Library/Frameworks/CoreLocation.framework/Versions/A/CoreLocation
Model: MacBookPro10,2, BootROM MBP102.0106.B03, 2 processors, Intel Core i5, 2.5 GHz, 8 GB, SMC 2.6f59
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x10F), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM128E, 121,33 GB
USB Device: Backup+ BL
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Pro, Apple Inc., 23.4That is a familiar error message.
You probably installed Final Cut.
http://support.apple.com/kb/ts3528
Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
Reason: image not found
The installation has replaced a dynamic library (PluginManager.framework) by an incompatible version, and the best option to restore this necessary framework will be to reinstall MacOs X. You can reinstall Mavericks on top of your current system, so you need not to reinstall anything else. -
My power mac G5 wont start up. When i turn it on it comes up with a message saying you need to restart you computer and a load of script drops down in the top left hand corner. I cant get past it and tried everything. This happens everytime i turn it on.
HELP!!!!!Hi-
Welcome to Discussions!
Have you-
1- Removed/disconnected all devices, except for keyboard, mouse and monitor?
2- Checked your panic log? You can check the kernel panic log any time that you must force restart your computer, using either the power button, interrupt button, or the Control-Command-power key combination. The kernel panic text is added to the log the next time you restart the computer, assuming that you have not reset PRAM at the same time (the kernel panic text is stored in PRAM until you restart). The file is named "panic.log", and it is located on your startup disk at: /Library/Logs/.
The panic report is also the "script" that is displayed when the "restart your computer" message appears. A copy of the report would help.
3- Tried a "safe boot"? Hold down the "shift" key when starting.
http://docs.info.apple.com/article.html?artnum=107393
4- After checking the panic log, try resetting the PRAM:
http://docs.info.apple.com/article.html?artnum=2238
What is a Kernel panic?
http://docs.info.apple.com/article.html?artnum=106227
Resolving Kernel panics:
http://www.thexlab.com/faqs/kernelpanics.html
Isolate kernel panics:
http://macosg.com/group/viewtopic.php?t=800
If you can get to the panic log, possibly during a safe boot, record the log, especially everything after "backtrace":
http://docs.info.apple.com/article.html?artnum=106228 -
Satellite U920 ultabook-tablet wont start
Hi everyone.
Just purchased the new Laptop/tablet 3 days ago.
Other than Windows 8 fustrating me death, the computer is wonderful..
until today.
Wont start !!
Lights come on... but now ones home..
I tried it with the battery as well as mains power.
When I press the start button...
the 2 / lights come on as usual.
Keyboard lights come on as well.
An thats about all that happends..
Eventually, after a minute, the computer will beep 3 times slowly then shut down.
No screen at all.. not even a light from the monitor..
Pretty annoyed as its only 3 days old...
Any advise ??
Cheers... Rob... Sydney> Just purchased the new Laptop/tablet 3 days ago.
The new notebook should function properly if its not the case, then either the hardware or software cause the problem.
I think its hardware so why you dont get in contact with your notebook dealer and ask for new notebook.
Replace this unit and test the new one -
Hello,
We've been traveling (and still are) so I have to shut off my computer to take it with us, to start it up at our next destination to get work done.
I have a Mac Mini that has always worked great.
I haven't loaded anything new or changed any settings. I'm a graphic designer, and it's my work computer, so I don't play games or let other people load / download games onto it (if that matters here)
Within the past year, every once in a long while, I thought it was restarting while I was away from it, but just blew it off that I was seeing things.
...With-in the last few weeks, it was getting difficult for it to start up...I would have to wait for it to come all the way up, or after waiting for quite awhile for it to finish starting, I'd have to unplug it, to push the start button again. ...sometimes it would take several times to finally get up and running.
...the last week, it started re-starting all by itself while I was in the middle of things. ...besides not wanting to start-up, sometimes, when it was up and running, it would only run for a couple minutes, then restart itself, sometimes several times in a row.
So, expecting to have trouble getting it to start, I would just sit on the floor and wait to have to work with it, but now, I push to ON button, and the light comes on, but then nothing else happens. ...so I unplug the power from the wall, and when I plug it back in, before I can push the on button, the ON light is already back on.
I read through other peoples questions and found some that were similar, and tried the hold the ON button for the count of 5, then plug it back in and hit the ON button...nothing happened.
Then I tried the unplug it, and hold the ON button while I plugged it back in...that got the fan to go extra fast. ..I tried it several times more, and it would very from having the light be stuck on, to getting the fan to run fast...but it still wont start up...it now just sits there with the little light on, while I sit and look at it
Any wisdom to get moving again would be appreciatedDo you have anything on your display? Or does the monitor act like the machine isn't powered up? Can you get it to respond to the keyboard in some way? Can you boot it in to target disk mode? (Power off, then hold the T key down and power the machine up. You should see the target disk mode icon appear and bounce around the screen...) If you have a firewire and another mac, can you see it on the other mac when you boot it in to target disk mode? Can you put the install disk in and boot off of it by holding down the C key while powering up? Can you get the CD out by hitting the eject key on the keyboard?
-
My imac is stuck at the loading screen and wont start up...
My 2006(ish) Intel core 2duo 2.16 mhz 20" imac wont start up, it only stays at the loading screen, how can i fix this?
Since you purchased your iMac long before the Lion OS was released your system should have come with a set of DVD's that can be used to reinstall the OS and applications. If you can locate those disks then stick the Install DVD into the optical drive, then power on the system while holding down the option key. Your system should boot with a menu showing the bootable volumes. After a few seconds you should hear the optical drive whirr and then see the Install DVD appear in the menu. Select the Install DVD and boot the system. Once booted you will have to select your language. Normally this disk is used to reinstall the OS, however for this exercise I would like you to pull down the Utilities menu in the menu bar and select Disk Utility. You can use the Disk Utility to check whether your hard drive is OK. If it fails the SMART (Self Monitoring Analysis, and Reporting Technology) status then you will need to replace the hard drive. You should also run the 'Verify Disk' and 'Repair Permissions' options if the SMART status indicates the drive is passing.
-
i upgraded to yosemite last week, now my computer wont start. it stops at white screen with apple logo. what do i do?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
hi i need help.. my hp envy 4 wont start. the monitor is not turning on, the caps locks keeps blinking every 5sec. i have tried i cant do anything because its not responding. please help. this happens after i upgraded my hdd into ssd and made a fresh instalation of window 7. it was ok at first but when i run the system bios update, i think it restarted and then stops on a black screen. i think i have the system recovery partition on my old HDD but i dont know how to access it because when i turn my laptop on its just black screen, no cursor what so ever on the screen, just the caps lock which blink every 5 secs..
Hello @khuletz,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your notebook will not successfully power on, and that there is a blinking CAPS Lock button on the keyboard. I would be happy to assist you in this matter!
To determine the significance behind the blinking light pattern, I suggest following the steps in this document on Computer does not start and the LEDs blink or the computer beeps. This should help identify the issue causing the blinking light on your notebook.
Please re-post with the pattern of blinking lights, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Glassfish wont start after the first deployment
good afternoon.
i got a problem that i would like to solve whit your help: after the first deployment of my proyect into Glassfish i keep getting this error over and over again, when i reinstall the server everything works fine but after the first deployment the server wont start again, I would be glad to know what i can do to solve this, thx:
Waiting for domain1 to start ...Error starting domain domain1.
The server exited prematurely with exit code 1.
Before it died, it produced the following output:
Launching GlassFish on Felix platform
Completed shutdown of GlassFish runtime
Exception in thread "main" java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at com.sun.enterprise.glassfish.bootstrap.GlassFishMain.main(GlassFishMa
in.java:97)
at com.sun.enterprise.glassfish.bootstrap.ASMain.main(ASMain.java:55)
Caused by: org.jvnet.hk2.component.ComponentException: Failed to create a habita
t
at com.sun.enterprise.module.common_impl.AbstractModulesRegistryImpl.cre
ateHabitat(AbstractModulesRegistryImpl.java:169)
at com.sun.enterprise.module.bootstrap.Main.createHabitat(Main.java:425)
at org.jvnet.hk2.osgiadapter.HK2Main.createHabitat(HK2Main.java:96)
at com.sun.enterprise.glassfish.bootstrap.osgi.EmbeddedOSGiGlassFishRunt
ime.newGlassFish(EmbeddedOSGiGlassFishRuntime.java:89)
at com.sun.enterprise.glassfish.bootstrap.GlassFishMain$Launcher.launch(
GlassFishMain.java:113)
... 6 more
Caused by: java.lang.RuntimeException: Fatal Error. Unable to parse file:/C:/Pr
ogram%20Files/glassfishv3/glassfish/domains/domain1/config/domain.xml
at org.glassfish.config.support.DomainXml.parseDomainXml(DomainXml.java:
273)
at org.glassfish.config.support.DomainXml.run(DomainXml.java:112)
at com.sun.enterprise.module.common_impl.AbstractModulesRegistryImpl.pop
ulateConfig(AbstractModulesRegistryImpl.java:176)
at com.sun.enterprise.module.common_impl.AbstractModulesRegistryImpl.cre
ateHabitat(AbstractModulesRegistryImpl.java:158)
... 10 more
Caused by: javax.xml.stream.XMLStreamException: ParseError at [row,col]:[11,88]
Message: Invalid byte 2 of 4-byte UTF-8 sequence.
at com.sun.org.apache.xerces.internal.impl.XMLStreamReaderImpl.next(XMLS
treamReaderImpl.java:590)
at javax.xml.stream.util.StreamReaderDelegate.next(StreamReaderDelegate.
java:88)
at org.glassfish.config.support.XMLStreamReaderFilter.thisNextTag(XMLStr
eamReaderFilter.java:94)
at org.glassfish.config.support.XMLStreamReaderFilter.nextTag(XMLStreamR
eaderFilter.java:74)
at org.jvnet.hk2.config.ConfigParser.handleElement(ConfigParser.java:199
at org.jvnet.hk2.config.ConfigParser.handleElement(ConfigParser.java:215
at org.jvnet.hk2.config.ConfigParser.handleElement(ConfigParser.java:167
at org.jvnet.hk2.config.ConfigParser.parse(ConfigParser.java:98)
at org.jvnet.hk2.config.ConfigParser.parse(ConfigParser.java:93)
at org.glassfish.config.support.DomainXml.parseDomainXml(DomainXml.java:
254)
... 13 more
Command start-domain failed.UPDATE:
I also tried a safe boot and now after inserting install DVD and pressing the option (alt) I choose the DVD-Install disc to boot but after 30-45 seconds appers on the grey boot monitor from "behind" the Terminal panic message:
panic (cpu 4 caller 0xfffffff80002d1208): Kernel trap at ...
Error code: 0x0000000000000000
Debugger called: <panic>
Backtrace (CPU 4), Frame : Return Adress
0xfffffffff8153283600 : 0x8000204d15
BSD process corresponding to current thread: ReportCrash
Mac Os version:
10J4139
Kernel version:
Darwin Kernel Version 10.7.4: Mon Apr 18 21:24:17 PDT 2011; root:xnu-1504.14.12~3/RELEASE_X86_64
How can I solve this, any Idea?
THX -
IPhoto'11 wont start anymore, even after re-installation
iPhoto'11 wont start anymore, even after reinstallation. It worked fine till today! (Okt.16)
in the report:
EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000006
Crashed Thread: 35
Who can help me out?Hi Raymond, we need more of that log, like from thread 35 on for a bit, like...
Thread 0 crashed with PPC Thread State 64:
srr0: 0x0000000090a410f8 srr1: 0x000000000000d030 vrsave: 0x0000000000000000
cr: 0x44022248 xer: 0x0000000000000004 lr: 0x000000000000d050 ctr: 0x0000000090a410e0
r0: 0x000000000000d040 r1: 0x00000000bfffd5a0 r2: 0x0000000000000001 r3: 0x0000000000059ec0
r4: 0x0000000090aacaa0 r5: 0x00000000bfffd604 r6: 0x0000000000000000 r7: 0x0000000001890000
r8: 0x0000000000000001 r9: 0x0000000001890000 r10: 0x0000000090a3f628 r11: 0x000000006f54caa0
r12: 0x0000000000000302 r13: 0x0000000000000000 r14: 0x00000000bfffe1d0 r15: 0x0000000000000000
r16: 0x00000000003b6f10 r17: 0x0000000000000000 r18: 0x0000000000000000 r19: 0x0000000000000000
r20: 0x00000000a37c6f6c r21: 0x000000000645f001 r22: 0x00000000003b4010 r23: 0x0000000000029b74
r24: 0x0000000004a25d60 r25: 0x0000000000030000 r26: 0x000000000032b370 r27: 0x0000000000030000
r28: 0x0000000004a12780 r29: 0x0000000000000000 r30: 0x0000000000000000 r31: 0x000000000645f000
Binary Images Description:
0x1000 - 0x27fff com.apple.ActivityMonitor 1.5 (54) /Applications/Utilities/Activity Monitor.app/Contents/MacOS/Activity Monitor
0xf2000 - 0xf5fff com.unsanity.paranoidandroid 1.3 /Library/Application Enhancers/Paranoid Android.ape/Contents/MacOS/Paranoid Android
0x205000 - 0x264fff com.unsanity.fontcard 1.3.1 /Library/Application Enhancers/FontCard.ape/Contents/MacOS/FontCard
0x298000 - 0x29afff com.unsanity.menuextraenabler Menu Extra Enabler version 1.0.1 (1.0.1) /Library/InputManagers/Menu Extra Enabler/Menu Extra Enabler.bundle/Contents/MacOS/Menu Extra Enabler
0x8fe00000 - 0x8fe52fff dyld 46.16 /usr/lib/dyld
0x90000000 - 0x901bcfff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x90214000 - 0x90219fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x9021b000 - 0x90268fff com.apple.CoreText 1.0.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/CoreText.framework/Versions/A/CoreText
0x90293000 - 0x90344fff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/ATS.framework/Versions/A/ATS
0x90373000 - 0x9072efff com.apple.CoreGraphics 1.258.79 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/CoreGraphics.framework/Versions/A/CoreGraphics
0x907bb000 - 0x90895fff com.apple.CoreFoundation 6.4.11 (368.35) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundat ion
0x908de000 - 0x908defff com.apple.CoreServices 10.4 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x908e0000 - 0x909e2fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
0x90a3c000 - 0x90ac0fff libobjc.A.dylib /usr/lib/libobjc.A.dylib
0x90aea000 - 0x90b5cfff com.apple.framework.IOKit 1.4 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x90b72000 - 0x90b84fff libauto.dylib /usr/lib/libauto.dylib
0x90b8b000 - 0x90e62fff com.apple.CoreServices.CarbonCore 681.18 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Ca rbonCore.framework/Versions/A/CarbonCore
0x90ec8000 - 0x90f48fff com.apple.CoreServices.OSServices 4.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OS Services.framework/Versions/A/OSServices
0x90f92000 - 0x90fd4fff com.apple.CFNetwork 4.0 (129.23) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CF Network.framework/Versions/A/CFNetwork
0x90fe9000 - 0x91001fff com.apple.WebServices 1.1.2 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/We bServicesCore.framework/Versions/A/WebServicesCore
0x91011000 - 0x91092fff com.apple.SearchKit 1.0.8 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Se archKit.framework/Versions/A/SearchKit
0x910d8000 - 0x91101fff com.apple.Metadata 10.4.4 (121.36) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Me tadata.framework/Versions/A/Metadata
0x91112000 - 0x91120fff libz.1.dylib /usr/lib/libz.1.dylib
0x91123000 - 0x912defff com.apple.security 4.6 (29770) /System/Library/Frameworks/Security.framework/Versions/A/Security
0x913dd000 - 0x913e6fff com.apple.DiskArbitration 2.1.2 /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitr ation
0x913ed000 - 0x913f5fff libbsm.dylib /usr/lib/libbsm.dylib
0x913f9000 - 0x91421fff com.apple.SystemConfiguration 1.8.3 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/System Configuration
0x91434000 - 0x9143ffff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib
0x91444000 - 0x914bffff com.apple.audio.CoreAudio 3.0.5 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x914fc000 - 0x914fcfff com.apple.ApplicationServices 10.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Applic ationServices
0x914fe000 - 0x91536fff com.apple.AE 1.5 (297) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/AE.framework/Versions/A/AE
0x91551000 - 0x91623fff com.apple.ColorSync 4.4.10 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/ColorSync.framework/Versions/A/ColorSync
0x91676000 - 0x91707fff com.apple.print.framework.PrintCore 4.6 (177.13) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/PrintCore.framework/Versions/A/PrintCore
0x9174e000 - 0x91805fff com.apple.QD 3.10.27 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/QD.framework/Versions/A/QD
0x91842000 - 0x918a0fff com.apple.HIServices 1.5.3 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/HIServices.framework/Versions/A/HIServices
0x918cf000 - 0x918f0fff com.apple.LangAnalysis 1.6.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/LangAnalysis.framework/Versions/A/LangAnalysis
0x91904000 - 0x91929fff com.apple.FindByContent 1.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/FindByContent.framework/Versions/A/FindByContent
0x9193c000 - 0x9197efff com.apple.LaunchServices 183 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/LaunchServices.framework/Versions/A/LaunchServices
0x9199a000 - 0x919aefff com.apple.speech.synthesis.framework 3.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x919bc000 - 0x91a02fff com.apple.ImageIO.framework 1.5.8 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/ImageIO.framework/Versions/A/ImageIO
0x91a19000 - 0x91ae0fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
0x91b2e000 - 0x91b43fff libcups.2.dylib /usr/lib/libcups.2.dylib
0x91b48000 - 0x91b66fff libJPEG.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x91b6c000 - 0x91c23fff libJP2.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/ImageIO.framework/Versions/A/Resources/libJP2.dylib
0x91c72000 - 0x91c76fff libGIF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x91c78000 - 0x91ce2fff libRaw.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/ImageIO.framework/Versions/A/Resources/libRaw.dylib
0x91ce7000 - 0x91d01fff libPng.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/ImageIO.framework/Versions/A/Resources/libPng.dylib
0x91d06000 - 0x91d09fff libRadiance.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x91d0b000 - 0x91df9fff libxml2.2.dylib /usr/lib/libxml2.2.dylib
0x91e18000 - 0x91e56fff libTIFF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x91e5d000 - 0x91e5dfff com.apple.Accelerate 1.2.2 (Accelerate 1.2.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x91e5f000 - 0x91f44fff com.apple.vImage 2.4 /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vIma ge.framework/Versions/A/vImage
0x91f4c000 - 0x91f6bfff com.apple.Accelerate.vecLib 3.2.2 (vecLib 3.2.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecL ib.framework/Versions/A/vecLib
0x91fd7000 - 0x92045fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecL ib.framework/Versions/A/libvMisc.dylib
0x92050000 - 0x920e5fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecL ib.framework/Versions/A/libvDSP.dylib
0x920ff000 - 0x92687fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecL ib.framework/Versions/A/libBLAS.dylib
0x926ba000 - 0x929e5fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecL ib.framework/Versions/A/libLAPACK.dylib
0x92a15000 - 0x92b03fff libiconv.2.dylib /usr/lib/libiconv.2.dylib
0x92b06000 - 0x92b8efff com.apple.DesktopServices 1.3.7 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A /DesktopServicesPriv
0x92bcf000 - 0x92dfafff com.apple.Foundation 6.4.10 (567.37) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x92f27000 - 0x92f45fff libGL.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dyl ib
0x92f50000 - 0x92faafff libGLU.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dy lib
0x92fc8000 - 0x92fc8fff com.apple.Carbon 10.4 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x92fca000 - 0x92fdefff com.apple.ImageCapture 3.0 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCap ture.framework/Versions/A/ImageCapture
0x92ff6000 - 0x93006fff com.apple.speech.recognition.framework 3.4 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRe cognition.framework/Versions/A/SpeechRecognition
0x93012000 - 0x93027fff com.apple.securityhi 2.0 (203) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Security HI.framework/Versions/A/SecurityHI
0x93039000 - 0x930c0fff com.apple.ink.framework 101.2 (69) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.fram ework/Versions/A/Ink
0x930d4000 - 0x930dffff com.apple.help 1.0.3 (32) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.fra mework/Versions/A/Help
0x930e9000 - 0x93117fff com.apple.openscripting 1.2.7 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScri pting.framework/Versions/A/OpenScripting
0x93131000 - 0x93140fff com.apple.print.framework.Print 5.2 (192.4) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.fr amework/Versions/A/Print
0x9314c000 - 0x931b2fff com.apple.htmlrendering 1.1.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRend ering.framework/Versions/A/HTMLRendering
0x931e3000 - 0x93232fff com.apple.NavigationServices 3.4.4 (3.4.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Navigati onServices.framework/Versions/A/NavigationServices
0x93260000 - 0x9327dfff com.apple.audio.SoundManager 3.9 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSo und.framework/Versions/A/CarbonSound
0x9328f000 - 0x9329cfff com.apple.CommonPanels 1.2.2 (73) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPa nels.framework/Versions/A/CommonPanels
0x932a5000 - 0x935b3fff com.apple.HIToolbox 1.4.10 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbo x.framework/Versions/A/HIToolbox
0x93703000 - 0x9370ffff com.apple.opengl 1.4.7 /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x93788000 - 0x93788fff com.apple.Cocoa 6.4 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x9378a000 - 0x93dbdfff com.apple.AppKit 6.4.10 (824.48) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x9414a000 - 0x941bcfff com.apple.CoreData 91 (92.1) /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x941f5000 - 0x942bafff com.apple.audio.toolbox.AudioToolbox 1.4.7 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x9430d000 - 0x9430dfff com.apple.audio.units.AudioUnit 1.4 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x9430f000 - 0x944cffff com.apple.QuartzCore 1.4.12 /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x94519000 - 0x94556fff libsqlite3.0.dylib /usr/lib/libsqlite3.0.dylib
0x9455e000 - 0x945aefff libGLImage.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImag e.dylib
0x945b7000 - 0x945d1fff com.apple.CoreVideo 1.4.2 /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
0x945e2000 - 0x94602fff libmx.A.dylib /usr/lib/libmx.A.dylib
0x9470d000 - 0x94729fff com.apple.securityfoundation 2.2 (27710) /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/Securit yFoundation
0x947a5000 - 0x947b4fff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
0x947bc000 - 0x947c9fff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
0x9480f000 - 0x94828fff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framew orks/CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
0x9482f000 - 0x94b59fff com.apple.QuickTime 7.4.5 (67) /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x94c40000 - 0x94cb1fff libstdc++.6.dylib /usr/lib/libstdc++.6.dylib
0x970ae000 - 0x97151fff libcrypto.0.9.dylib /usr/lib/libcrypto.0.9.dylib
0x97fa2000 - 0x97fd4fff com.apple.GraphKit 1.0.0 (8) /System/Library/PrivateFrameworks/GraphKit.framework/Versions/A/GraphKit
0xc0000000 - 0xc000ffff com.unsanity.ape 1.5.1 /Library/Frameworks/ApplicationEnhancer.framework/Versions/A/ApplicationEn hancer -
Mac wont start if ADC is not Connected??
I have a G4 Quicksilver Dual processor, with Tiger OSX installed on it. The video card installed has a ADC and VGA connector. I recently wanted to change from the ADC monitor to the VGA(new PC Monitor). But when the apple display is not plugged in the computer wont start.
Why
I have done all the system preference stuff and changing secondary to primary and even swapped video cards with another machine which i know works with the VGA connection.
Please Help
CheersI do not believe it's the Graphic Card, I think it would need either a new Logic Board or Power supply.
Which card is it exactly, some can run both monitors at once.
And there may be a slight possibility that a Keyboard like this with a "Power Key" at the top right corner may work to start it...
http://tinyurl.com/5s28kla -
**OS : RHEL 4.5**
**java: JDK 1.6.0_32**
**I installed and configured weblogic server (10.2.3) and created a domain through windows pc (client machine).**
**Installed OFM WebTier and yet to configure.**
**I have set up env variables and tried to start WebLogic server from a client maching by issuing "nohup ./startWebLogic.sh"**
**After issuing this command it takes a lot of time, hence I did ctrl c**
**In nohup.out, I could see weblogic changing from standby to starting.**
**After that, I am pasting the lines below.**
<Jun 6, 2012 1:02:21 AM CDT> <Warning> <oracle.dms.collector> <BEA-000000> <Metric table "reports:Reports_Servlet_Response" has no key column. It will not be collected.>
<Jun 6, 2012 1:02:21 AM CDT> <Warning> <oracle.dms.collector> <BEA-000000> <Metric table "reports:Remote_Bridge_Elements" has no key column. It will not be collected.>
<Jun 6, 2012 1:02:22 AM CDT> <Warning> <oracle.dms.collector> <BEA-000000> <Metric table "portaltools:Response" has no key column. It will not be collected.>
<Jun 6, 2012 1:02:22 AM CDT> <Warning> <oracle.dms.collector> <BEA-000000> <Metric table "oracle_soainfra:total_faults" has no key column. It will not be collected.>
<Jun 6, 2012 1:02:22 AM CDT> <Warning> <oracle.dms.collector> <BEA-000000> <Metric table "activitygraph:Response" has no key column. It will not be collected.>
<Jun 6, 2012 1:02:22 AM CDT> <Warning> <oracle.dms.collector> <BEA-000000> <Metric table "portal:portal_page_engine_response_codes_delta" has no key column. It will not be collected.>
<Jun 6, 2012 1:02:22 AM CDT> <Warning> <oracle.dms.collector> <BEA-000000> <Metric table "portal:portal_page_engine_response_codes" has no key column. It will not be collected.>
<Jun 6, 2012 1:02:22 AM CDT> <Warning> <oracle.dms.collector> <BEA-000000> <Metric table "portal:portal_page_engine" has no key column. It will not be collected.>
<Jun 6, 2012 1:02:22 AM CDT> <Warning> <oracle.dms.collector> <BEA-000000> <Metric table "domain_oracle_oim:jdbc" has no key column. It will not be collected.>
<Jun 6, 2012 1:02:22 AM CDT> <Warning> <oracle.dms.collector> <BEA-000000> <Metric table "webcache:request_filter_denied_stats" has no key column. It will not be collected.>
<Jun 6, 2012 1:02:22 AM CDT> <Warning> <oracle.dms.collector> <BEA-000000> <Metric table "analytics:Response" has no key column. It will not be collected.>
<Jun 6, 2012 1:02:22 AM CDT> <Warning> <oracle.dms.collector> <BEA-000000> <Metric table "oracle_federation:protocol_profiles_rollup" has no key column. It will not be collected.>
<Jun 6, 2012 1:02:22 AM CDT> <Warning> <oracle.dms.collector> <BEA-000000> <Metric table "oracle_federation:protocol_profiles_events_rollup" has no key column. It will not be collected.>
<Jun 6, 2012 1:02:22 AM CDT> <Warning> <oracle.dms.collector> <BEA-000000> <Metric table "oracle_federation:protocol_profiles_protocol_phase_events_rollup" has no key column. It will not be collected.>
<Jun 6, 2012 1:06:13 AM CDT> <Notice> <WebLogicServer> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
<Jun 6, 2012 1:06:13 AM CDT> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>
<Jun 6, 2012 1:06:13 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Weblogic wont' start. i checked by "hostname:port/em". I couldn't connect.
Please advice.
Thank youcopy/psting for nohup.out.
I started with a fresh server
Installed RHEL 4.5
Configured pre-reqs for installing weblogic.
Installed Weblogic server
Installed FMW WebTier
Configured Weblogic Server and trying to start.
Did I miss any step here.
Thank you in advance
[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x080c0400 nid=0x30d0 in Object.wait() [0x708ba000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x80620da0> (a weblogic.work.ExecuteThread)
at java.lang.Object.wait(Object.java:485)
at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:205)
- locked <0x80620da0> (a weblogic.work.ExecuteThread)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:226)
"[ACTIVE] ExecuteThread: '10' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x080e8000 nid=0x30cf in Object.wait() [0x7090b000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x80620e50> (a weblogic.work.ExecuteThread)
at java.lang.Object.wait(Object.java:485)
at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:205)
- locked <0x80620e50> (a weblogic.work.ExecuteThread)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:226)
"[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x080e6400 nid=0x30ce in Object.wait() [0x7095c000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x80620f00> (a weblogic.work.ExecuteThread)
at java.lang.Object.wait(Object.java:485)
at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:205)
- locked <0x80620f00> (a weblogic.work.ExecuteThread)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:226)
"[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x080e4c00 nid=0x30cd in Object.wait() [0x709ad000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x80620fb0> (a weblogic.work.ExecuteThread)
at java.lang.Object.wait(Object.java:485)
at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:205)
- locked <0x80620fb0> (a weblogic.work.ExecuteThread)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:226)
"[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x70a62400 nid=0x30cc in Object.wait() [0x709fe000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x80621060> (a weblogic.work.ExecuteThread)
at java.lang.Object.wait(Object.java:485)
at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:205)
- locked <0x80621060> (a weblogic.work.ExecuteThread)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:226)
"[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x7213cc00 nid=0x30cb in Object.wait() [0x70b9d000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x80621110> (a weblogic.work.ExecuteThread)
at java.lang.Object.wait(Object.java:485)
at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:205)
- locked <0x80621110> (a weblogic.work.ExecuteThread)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:226)
"[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x71673c00 nid=0x30ca in Object.wait() [0x70bee000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x806211c0> (a weblogic.work.ExecuteThread)
at java.lang.Object.wait(Object.java:485)
at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:205)
- locked <0x806211c0> (a weblogic.work.ExecuteThread)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:226)
"[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x72152800 nid=0x30c9 in Object.wait() [0x72296000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x80621270> (a weblogic.work.ExecuteThread)
at java.lang.Object.wait(Object.java:485)
at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:205)
- locked <0x80621270> (a weblogic.work.ExecuteThread)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:226)
"[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x70c8d400 nid=0x30c8 in Object.wait() [0x7269f000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x80621320> (a weblogic.work.ExecuteThread)
at java.lang.Object.wait(Object.java:485)
at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:205)
- locked <0x80621320> (a weblogic.work.ExecuteThread)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:226)
"[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x727c7c00 nid=0x30c7 in Object.wait() [0x72f55000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x806213d0> (a weblogic.work.ExecuteThread)
at java.lang.Object.wait(Object.java:485)
at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:205)
- locked <0x806213d0> (a weblogic.work.ExecuteThread)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:226)
"[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x741a7c00 nid=0x30c6 in Object.wait() [0x73856000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x80621480> (a weblogic.work.ExecuteThread)
at java.lang.Object.wait(Object.java:485)
at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:205)
- locked <0x80621480> (a weblogic.work.ExecuteThread)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:226)
"[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x72132800 nid=0x30c5 in Object.wait() [0x738a7000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x80621530> (a weblogic.work.ExecuteThread)
at java.lang.Object.wait(Object.java:485)
at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:205)
- locked <0x80621530> (a weblogic.work.ExecuteThread)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:226)
"Timer-1" daemon prio=10 tid=0x72127800 nid=0x30c4 in Object.wait() [0x73d5f000]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x80621658> (a java.util.TaskQueue)
at java.util.TimerThread.mainLoop(Timer.java:509)
- locked <0x80621658> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"Timer-0" daemon prio=10 tid=0x70c80400 nid=0x30be in Object.wait() [0x74394000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x80020198> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:485)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x80020198> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"Low Memory Detector" daemon prio=10 tid=0x74b00c00 nid=0x30b9 runnable [0x00000000]
java.lang.Thread.State: RUNNABLE
"C1 CompilerThread0" daemon prio=10 tid=0x080bcc00 nid=0x30b8 waiting on condition [0x00000000]
java.lang.Thread.State: RUNNABLE
"Signal Dispatcher" daemon prio=10 tid=0x080bb400 nid=0x30b7 waiting on condition [0x00000000]
java.lang.Thread.State: RUNNABLE
"Finalizer" daemon prio=10 tid=0x080ac800 nid=0x30b5 in Object.wait() [0x74f33000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x80020368> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
- locked <0x80020368> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=10 tid=0x080a7c00 nid=0x30b4 in Object.wait() [0x74f85000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x800200a8> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:485)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
- locked <0x800200a8> (a java.lang.ref.Reference$Lock)
"main" prio=10 tid=0x0805b800 nid=0x30b2 in Object.wait() [0xb76bf000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x800200e0> (a weblogic.t3.srvr.SubsystemRequest)
at weblogic.t3.srvr.SubsystemRequest.rendezvouz(SubsystemRequest.java:100)
- locked <0x800200e0> (a weblogic.t3.srvr.SubsystemRequest)
at weblogic.t3.srvr.SubsystemRequest.action(SubsystemRequest.java:81)
at weblogic.t3.srvr.SubsystemRequest.start(SubsystemRequest.java:51)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:459)
at weblogic.t3.srvr.ServerServicesManager.startInAdminState(ServerServicesManager.java:239)
- locked <0x959cb4a8> (a java.lang.Class for weblogic.t3.srvr.ServerServicesManager)
at weblogic.t3.srvr.T3Srvr.initializeAdmin(T3Srvr.java:908)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:585)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
at weblogic.Server.main(Server.java:71)
"VM Thread" prio=10 tid=0x080a4000 nid=0x30b3 runnable
"VM Periodic Task Thread" prio=10 tid=0x74b03000 nid=0x30ba waiting on condition
JNI global references: 1727
Heap
def new generation total 78720K, used 6833K [0x75580000, 0x7aae0000, 0x80020000)
eden space 70016K, 8% used [0x75580000, 0x75b09a90, 0x799e0000)
from space 8704K, 13% used [0x7a260000, 0x7a382b88, 0x7aae0000)
to space 8704K, 0% used [0x799e0000, 0x799e0000, 0x7a260000)
tenured generation total 174784K, used 81106K [0x80020000, 0x8aad0000, 0x95580000)
the space 174784K, 46% used [0x80020000, 0x84f548c8, 0x84f54a00, 0x8aad0000)
compacting perm gen total 158720K, used 158546K [0x95580000, 0x9f080000, 0xb5580000)
the space 158720K, 99% used [0x95580000, 0x9f0548e0, 0x9f054a00, 0x9f080000)
No shared spaces configured.
Maybe you are looking for
-
How do I get Ethernet Link Speed stuck at 10 Mbit/s to 100?
I've 100 Mps Internet service. My iMac limits ethernet to 10 mps, although the specs say it should be capable of at least 100 mps. A PC connected to the same Time Capsule gets 100 mps. My network utility claims the link speed is only 10. If I try
-
Where do I install Avid Meridien codecs for use in Final Cut Pro X on Lion?
I'm using FCPX and imported a couple of files that were output with the Avid Meridien codec. When I try to use the files in FCPX, I can hear the audio, but I get no video. How do I get FCPX to see the codecs?
-
Web service username and password problems
Hi, I am trying to create a client to consume webservices exposed on a secure .net platform that is SSL protected (https). I am using netbeans 6 with WSIT support. When I create the web service and add the WSDL file - it comes up with the certificate
-
How to launch application like word, excel, powerpoint or *.exe on client
Hi, could anyone advise which iView or other portal application I have to use, to get an application like word, excel, powerpoint or *.exe on Clinet side (e.g. notepad.exe) working. Solution should be: I will klick in the fine navigation on the link
-
IPMP in a Zone with exclusive IP-stack
Hello, I'm looking for some Infos or Advices about IPMP in a Zone with exclusive IP-stack. Should I create for each Zone an IPMP Group ? Any Best Practices ? Regards.