Thunderbolt Notification/ringtone issue after 2.11.605.9 Update

I know that this latest update was supposed to fix the bug where the wrong ringtones were being played when a custom ringtone had been set; however, now I am seeing a different issue with ringtones/notification sounds. After receiving the update on 12/21, I have noticed that my ringtones and notifications sounds no longer stay set. I noticed it when my email notification sound started playing some mp3 that I had on my phone and as I was looking further, all of my contacts that I had given custom ring tones were now set to some other ringtone. I reset all of custom ringtones on my contacts and notifications sounds that I had noticed had changed. This morning....many of them were set to something else again. Including the gmail app notification sound (again). Is anyone else experiencing this issue.

Same issue as many have described above.
After update to 2.11.605.9 my custom ringtones and notifications change every time the device is power cycled. The vast majority of the time my txt notification sound is changed to "Facebook Pop" (which I don't actually remember being an option prior to the update to Gingerbread). That sound is nearly inaudible, not to mention it's not the custom notification sound I've selected, and contiune to select.
About 25% of the time after reboot the device selects an mp3 file saved on my phone, one that isn't even listed within my notification ringtone selections list. It's pretty bizarre, not to mention more than a little frustrating.
It makes no difference if the phone it just restarted, or shtudown completely and then started up once more - notification & ringtone selctions are not saved.

Similar Messages

WD Mybook Thunderbolt Duo stop working after 10.9.4 update.

WD Thunderbolt Duo stop working after 10.9.4 update.
The drive does not show in disk Utility & WD utility, but it show at System information. Restart does not help,
MBP 15' early 2011.

Only thunderbolt available, check on some forum, it could be my MBP's thunderbolt port problem.
I'm living in Malaysia, there are no apple store, only authorised seller, it will take weeks to repair... which is a big issue for me,

Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home. Any suggestions on where to look to fix this?

Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home. Any ideas on how to fix this?

That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

Is there any fix for the bluetooth connectivity issue after most recent OS update?

Seems to be a common problem particularly with bluetooth headseat connectivity. Any ideas?

There is no bluetooth connectivity issue after the recent OS update. There may be a problem with your phone, which may or may not be related to the update. A "common problem" looks like this in the forums:
I haven't seen any threads on BlueTooth with over 1.4 million views and over 12,000 replies, or even any vaguely close. For any problem that someone has there is bound to be someone else amoung 150 million users who have it. That doesn't make it a "common problem."
If you tell us what the problem is specifically and what you have done so far to try to resolve it someone can probably help you.

Display Issue after 10.9.2 update

After updating my Macbook Pro with Retina to 10.9.2 -- My display flickers for a second after sleep and or blank screen and then goes back to normal. Has anyone else been having display issues after updating?

Yes similar problem here: I have a MacBook Pro, 15 inch Retina, Mid 2012, and when I connect a secondary display via HDMI (and also HDMI-to-Thunderbolt) then the external monitor becomes the main display.
I have not figured out on how to switch back to former settings. My guess: it's a bug. A quick search confirms that many others have secondary display issues since 10.9.2
(Steve would have fired those lazy punks, who failed to do sincere testing before release …)

IPad2 Issues after iOS 8.1 update

iPad2 64g wifi + cellular -   very slow and non-responsive since iOS 8.1 update. nonstandard Apps seem to be working fine.. it’s the standard item like photos and safari that don't respond.
photos - (which I use daily to show clients examples) will freeze and kick me out back to the home page when trying to do anything from open a photo for viewing to trying to delete a photo. Edit.. forget it.   better off using an alternate app to edit a photo as it locks up and crashes every time.   I really need to be able to view the photos on my iPad2
safari -   good luck using any hyper link…. It doesn’t respond.   Even at Apple’s website.   Sometimes it crashes but most of the time it just ignores me like I haven’t touched the screen
Overall - the touch screen is glitchy since the iOS 8.1 update. It was slow after the iOS 8.0 update but has become almost unusable after the 8.1 update.
I cannot afford to purchase a new iPad. And I really need to find a way to make this one work.
I did read about how to restore to an older iOS version.   The only problems are all of my laptop is Windows based and the instructions assumed you had a Mac.   I did a backup to iTunes prior to the 8.0 update but I have also done backups since.   So I am not sure I have a “clean” iOS 7 backup.
Any ideas would be appreciated   Thank you in advance for your help
Deborah

zooga wrote:
safari -   good luck using any hyper link…. It doesn’t respond.   Even at Apple’s website.   Sometimes it crashes but most of the time it just ignores me like I haven’t touched the screen
For the touch issues in Safari, does scrolling or zooming the page before you try to tap a link make it work again? I've read a few posts that this may be a workaround for that issue.

How i get by with the sleep, pause issue after 1.0.2 update

ok. i'm sure you guys are aware of the ipod sleeping/pausing issue after updating your ipod to 1.0.2. my ipod will pause whenever it is in the jensen dock station and the green battery indicator shows up. whenever i use the dock or remote to unpause the song, a few seconds later, it pauses again. so instead of using the dock or remote to play, unpause, whatever, i connect the ipod to the dock and use the wheel to navigate and 'only' use the play/pause button on the ipod itself to kick off the playing of music. if i go back to the remote, the ipod pauses. if i only use the menu and play/pause button on the wheel, my songs do not pause. it sure was nice using the remote before 1.0.2. i mean, it did come with the dock for my remoting pleasure but alas, i shall wait on the next update. hope this helps someone.

I will have to try that... I took my iPod to work today and plugged it into my JBL docking station and it was skipping. I did notice it seemed to go to sleep more often when I used the remote... There's a whole other forum on this maybe you could check out too. But it's really annoying and I hope Apple comes out with a fix soon! I will definitely try to use the iPod wheel tomorrow and not the remote.

Massive battery drain issues after the latest software update - phone hot

After the latest software update (to the NI2 version) I have massive battery drain issues. The phone also stays hot. Even when I don't actively use the phone it seems to stay "awake" according to the stats. When I disable all data (Wifi and/or 3G/4G) it's perfectly fine. Does anyone else experience the same issues or has recommendations?

Is the device trying to sync all your photos with the cloud?
This is what I would do.
Back up your photos and music onto a personal computer. Copy down important settings like for your email, and contacts you can't risk losing.. even icon placement of important apps. Diagram it out.
Then perform a Factory reset on the device. Alternatively you might find the procedure for wiping the low level cache of the device posted in other posts on the site. That might fix the problem and avoid you losing settings and content on your device.
Extremely bizarre behavior post updates are usually associated with low level cache issues that cause the OS to behave poorly. Some people have reported their phones running hot and that could mean the radio is on constantly attempting to back stuff up to the cloud our restore stuff.
Good luck.

Satellite 100-192: Issues after the latest MS update...

Satellite 100-192.
After the latest MS update I first had the problem with the Realtek sound card driver. I solved it by applying the patch MS provided.
Now the problem is that the disc cleanup utility does not launch. Anybody any idea?

I just found out that my disc cleanup utility would not work because of a free program called Photo Toolkit. Although it is a nice little program to quickly edit photos, apparently it causes such problems when it is loaded.

Macbook Air thunderbolt ethernet not working after 10.8.3 update

Hi,
Thunderbolt Ethernet for my Macbook Air (11-inch, Mid 2012) stopped working after installing 10.8.3 update. I am unable to conect to my router via thunderbolt Ethernet connection port.
Anyone else having the same issue? Any recommendations?

Unplug your thunderbolt adapter. Restart the router.
Go to your Mac and go to System Preferences >> Network
Use the - button in the lower left corner to delete your Thunderbolt to Ethernet adapter.
Now plug your thunderbolt adapter back in and use the + button to add "Ethernet Thunderbolt" to your list of connections. Move it back up in the order of network preference you want.
Your network access should now be reset.

Razr M having sound issues after 4.4.2 update.

So I turned my phone screen on and I saw that I had a update to do the 4.4.2 update and I left it while it updated. I came back and saw that everything was new but the sound keeps making this clicking noise. So when I get a text I hear an odd click followed by my text message tone. It's not just for notifications either, it does it before ringtones and even on the screen lock sound. I was wondering if anyone else had this, I haven't had the phone itself too long either.

PLEASE STOP posting useless "safe mode/master reset" crap in here. It's obvious that these problems are happening to people RIGHT after the software update, and many have already said that they have already reset, etc, and done all this, and it doesnt help. Also, if you actually read, the Motorola forum post I linked to, people have reported similar and nothing fixes it. The update itself caused it. NOT any other apps running. If you have nothing productive or actual troubleshooting to add, please remain silent. Anything else, and you just post in here looking like robotic ******. That's my 2 cents.

How can I restore my ringtones files after an iTune software update?

This has really upset me but I can't find anyone to help. If you can, it would be greatly appreciated.
I have create a bunch of ringtones and they have been showing up fine on my iTune and synced to my iPhone without any problem. Recently, i have replaced my iPhone. One time the iTune asked me to relocate the library file when i started the application. Then I chose the latest library file in my system. After i did it, I realized that the ringtones are not on my iPhone anymore and they are all gone on my iTune.
I tried to go in to the Windows files and look for those ringtone files but i have no clue where they are and how to identify them.
How can i check if they might be hidden somewhere or they have been lost mysteriously?

Hi cor-el,
Thanks for the reply.
I had been to that page during my search for solutions but found it a bit confusing, although I did create a new profile but didn't understand the choose folder part.
I re-read the instructions and I have been able to restore my old profile.
So, thanks for pointing me in the right direction.
Re: running my Firefox from a non-administrator account
I think this may have been the cause of the profile problem.
I.e. when I selected 'Choose a folder' when creating the new profile, the default folder path was Administrator> etc., where as my old profile was not there, but in Username> etc. folder path...
I understand browsing from a non-administrator account is the sensible security option, but is causes other problems when installing updates...
Thanks for the help. It's much appreciated.
Davoid.

Wired keyboard issue after 10.9.4 update

Hello all,
I disconnected the Apple USB keyboard (A1243) from my MacBook Pro last night, and I started seeing an issue where my Mac would no longer power/recognize my keyboard once I reconnected it. I tried doing the steps to reset both SMC and PRAM, but still my keyboard would not work when connected. I decided to test the USB port so I connected my iPhone to it, and it connected and synched just fine. I also tested a USB drive on it and was able to copy files off it. I also took my Mac keyboard and connected it to a Windows 7 laptop, and it worked just fine. After looking at the console logs, I noticed this error showing up:
7/4/14 8:24:40.000 PM kernel[0]: USBF: 18393.519 AppleUSBHubPort::FatalError - Port 2 of Hub at 0x14200000 reported error 0xe00002c0 while doing setting port power
This shows each time I connect my Apple keyboard into the USB ports on my machine. I decided to try to connect the keyboard one last time just now and it finally worked. I was accidentally pressing the keys down as I connected it, and I started hearing beeping sounds from my speakers. A few seconds after that, the keyboard started typing and working correctly. I tried the same steps on the original USB port I had it on before (left side), but it's still not working at all. I suspect that this has to do with the new update I just installed as I did not have any issues before.
Many thanks,
Adrian C.

To confirm what John Galt is reporting, I just tested printing this web page from OS X 10.9.4 to an old HP LaserJet here. Worked correctly.
In addition to what John Galt is asking, which model(s) of HP printers are involved here?
If you're getting error dialogs or messages in the console log (available via Console.app), please post those.
If you're working with an IT organization and particularly with managed network switches, have you checked with IT about issues there?
If there are any antivirus or antimalware tools in use here, remove that miasma from at least one test system, and test printing again.

Even more issues after installing 3.1 update. What to do.

HI there,
It would seem that since I have installed 3.1 my iPhone 3Gs 32GB white is acting very strange. Heres my story...
I have noticed the following behavior since the install. Sound randomly not working. Home button randomly not working.
Have done a Restore
Have removed all my applications thinking maybe an app was not compatible with the 3.1 update and therefore was causing the problems.
... still noticed home button issue even after removing all apps.
... sound issue happened once but seems OK now.
I have read other postings about these two issues. It would seem others are experiencing the same problems. However, I found no fix for it. That is why I thought it might be an app interfering.
As I said it still happens at random times but lately it has been working fine so I am wondering if it was an app I had installed.
Just to add some history, this is my 2nd iphone as I had a problem with my 1st one. The one I am currently using was sent to me by my Wireless provider and it was refurbished. So I am wondering if the randomness of the home button was the reason this iphone was returned in the first place. And the problem is reoccurring. Or is it just consequence that it is happening now after I installed the 3.1 update.
I have made an appointment at my local Apple store(genius bar) for them to have a look at it, however my luck is when I go the phone will be working fine and they will not do anything. The phone is not three months old so I fall within the 90 days warranty and I just purchased the AppleCare for iPhone as backup. I am hoping I will get a new iPhone to replace this one because it was refurbished.
So my question is
Do you think it was an application that was causing the issue or could it be a hardware problem with the button? Is it known fact that some iPhone apps are not 3.1 compatible and can cause issues?
Thanks and I look forward to your replies.
...Bruce

BGmail wrote:
I have made an appointment at my local Apple store(genius bar) for them to have a look at it, however my luck is when I go the phone will be working fine and they will not do anything. The phone is not three months old so I fall within the 90 days warranty and I just purchased the AppleCare for iPhone as backup. I am hoping I will get a new iPhone to replace this one because it was refurbished.
So my question is
Do you think it was an application that was causing the issue or could it be a hardware problem with the button?
Possible but the Apple store visit is the right way to go.
Phil

Sound issue after )X10.5.6 update

after updating to 5.5 i get one loud pop/crack sound when starting or wakeing my mac up from sleep.
I am useing it with harman/kardon sound stick speakers
Anyone had simler issues or no how to resolve this?
Thank you
Michael

Hello Anton. Have you had any luck with your problem?
I have recently noticed that my Samson CO1U USB Microphone is now very quiet and muffled when connected to my MacBook and yet it still works fine on a Windows XP machine. As it used to be fine with my Mac before the 10.5.6 update I can only assume that this latest update has caused a big problem with some USB devices. Like you, I can't get any answers.
I am thinking of rolling back to 10.5.4 to see if I can use my Microphone again.

Thunderbolt Notification/ringtone issue after 2.11.605.9 Update

Similar Messages

Maybe you are looking for