Thunderbolt only connects to 3G in 4G area

I have had my thunderbolt for a week now and it has not once since activation connected to 4G. It is in my area it says on the site you check with your zip and address. I just want my unlimited 4G I am paying for!

I definitely understand why you would want to get your 4G working on your phone. I would like to check a few things in your area and verify this is a 4G area and see if there are any issues. Can you please send me a PM with your name, number and your full address? 

Similar Messages

  • After scrubbing virus, firefox cannot connect to internet in one area only of my computer

    scrubbed a virus win32/nuqel.E and win32/Fake Spypro from multiple user areas on my laptop, now in one user area only I am not able to connect to internet on Firefox, able to connect on Opera in that user area and able to connect in all other user areas with Firefox, what could be causing this anomally?

    scrubbed a virus win32/nuqel.E and win32/Fake Spypro from multiple user areas on my laptop, now in one user area only I am not able to connect to internet on Firefox, able to connect on Opera in that user area and able to connect in all other user areas with Firefox, what could be causing this anomally?

  • Macbook air charges fine with the Thunderbolt screen connection but only sometimes with the 45 W chargers.

    My Macbook air charges fine with the Thunderbolt screen connection but only sometimes with the 45 W chargers. It seems to be the combination of the chargers and the computer. I was thinking whether the Thunderbolt screen has a larger power supply which easier activates the computer to actually receive the charge. It reminds me a bit of the Nokia Lumia 800 telephone, which when totally exhausted needs a strong charger to be activated again. I am as frustrated as most others.  I have got two chargers, and both of them sometimes work, other times not. Sometimes, they start working after a while. Is Apple meanwhile coming up with a solution or advice how to handle such situation?

    I just got my ATD and late 2011 MBP up and running. I've not tried running without the power adapter from the ATD plugged in, but I just tried and didn't have any problems with the display not waking. You may want to take your query to the ATD forum - https://discussions.apple.com/community/peripherals/thunderbolt_display - perhaps someone there has experienced a similar issue.
    Good luck,
    Clinton

  • HT4623 I have an iPad 4th generation and when I updated to iOS 7 I can't use FaceTime.  Every time I tried to sign in I get a message asking me to check my Network connection.  FaceTime and iMessage are the only application that give me this message.

    I have an iPad 4th generation and when I updated to iOS 7 I can't use FaceTime.  Every time I tried to sign in I get a message asking me to check my Network connection.  FaceTime and iMessage are the only application that give me this message.

    Try Reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings will be reset.

  • Thunderbolt display connected to 3 devices?

    Is it possible to connect a Mac Mini, Mac Pro and a Macbook Air to a single Thunderbolt display? The Mini and Pro are permanently connected while the Air is occasionally connected.

    My wife has a brand new 27" LED display on her older model Mac mini (pre-Thunderbird) and I have a relaltively new 27" TB display on my late model Mac mini. They both cost the same. As far as being a display, there is nothing to choose between them and any limitations we have encountered are due to the display card technology used in the two Mac minis, and not the displays. The sole advantage of the TB display, that I can see, is in the additional data hubs (Gigabit ethernet, USB 2, and Firewire 800) and the single cable connection between the computer and the Mac.
    When I gaze into a crystal ball, I see a long future for the Thunderbird interface and moving the TB display to future Mac minis or Mac Pros. The same crystal ball also shows the mini DisplayPort slowly dying out or being supplanted by the far more capable Thunderbird (or whatever the PC vendors elect to call it when they get around to adopting it). Further, since you have a Mac Pro, I assume you are a power user and the new Mac Pro looks very interesting so I would guess you are likely to move up in the foreseeable future. However, it is only fair to note my crystal ball is scratched, dirty, and some of the smoke has leaked out so it is notoriously hard to read and I may be reading the future incorrectly.
    Only you can decide what you want to do, but if I were in your shoes I would either go into the nearest Apple store and talk to someone there, or go to the Online Apple Store, click on the "Chat" button and ask if the Thunderbird display will work as a display only through a mini DisplayPort connection. If the answer is yes then I would place a bet on the future and buy the Thunderbird display even though I could not currently use all that it offers. Alternatively I might consider buying a less expensive (cheap) third pary display and an appropriate $35 mini DisplayPort adaptor on the theory that by the time I was ready to buy a new Mac Pro Apple would have an even better  27" Thunderbird display.
    Message was edited by: Joe Bailey

  • Can only connect to HTTPS (secure) sites and can't connect to HTTP sites

    In short I CAN ONLY connect to HTTPS sites, meaning secure.
    I've narrowed this down to an issue regrading my mac book pro and the wireless router.
    Router:
    - not sure of the make model
    - other computers CAN connect to this router and go online
    My Mac:
    - Mac Book Pro
    - OS X 10.6
    - I can connect to other wireless networks just fine
    - I can surf the web for about 10 minutes or so then it blocks ALL http traffic
    and i'm only allowed to https sites
    going to a http site results in a "page is taking to long to respond"
    please anything?

    The router is a Verizon MI424WR
    hope that helps, but i doubt it will...
    just to also clairfy http sites either go really slow then time out only never to come back, https are blazing fast

  • Can only connect to Internet from one computer at a time on network

    I have a 2 computer network in my office networked with an Asante 10/100 hub. The computers are a iMac 24 (Intel) and an old G4 (PCI). The network has worked fine until just recently. Now, I can only connect to the Internet with one computer at a time...(DSL connection). I checked cables, ports, etc, and I'm wondering if this is a 10.4.9 issue. Coincidentally, I noticed that I am not able to access the Internet via Win XP using Parallels which also worked fine up until recently. I checked with the ISP (AT&T) who confirmed that all is OK on their end. Anyone have similar problem? Could OS X 10.4.9 be the culprit? Any help on this will be much appreciated. Thanks.
    iMac 24   Mac OS X (10.4.9)   2G RAM; NVIDIA GeForce 7600 GT 256

    I'd consider that a 3 computer network, Parallels being a virtual machine would alias the ethernet interface and need its own IP address. That may or may not have anything to do with your problem. Actually, the way you've described things, it sounds like a lot has to do with your contract with ATT. Is there a routing device at your end?
    The only way 10.4.9 could be the culprit would be if it were the routing device.
    -Phil

  • I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?

    I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?

    Both accounts are completely independent from each other. In order to use the space that you have purchased for your secondary account, you must change it to become your primary account. Yes, as you said, services like photo stream only work with the primary account. Unfortunately, there is no comfortable way to just transfer data from one account to another one, but you can do it via a third party application e.g. via Dropbox: e.g. for photos: photos stored with your current primary account > manual transfer to dropbox > after you made your secondary account to the primary account,  transfer the photos back to your new primary account etc.

  • How do I use time capsule as a direct backup drive only connect to my macbook pro via ethernet cable

    I have recently abandoned my cable internet service provider and am using my iPad as a hotspot via verizon wireless service.  I am trying to reconfigure my time capsule as a back up drive only connected by an ethernet cable. 
    I was able to set it up on my new hotspot wireless net, but do not want to use it that way because of the data usage impact on my verizon wireless account.
    Hopefully there is an easy answer, but it is not intuitively obvious to me. 

    Well I have to say you can do it.. but if you are plugging and unplugging ethernet, you could just as easily plug and unplug an external USB drive.. and it will be faster and more reliable than the TC.
    I explained how to do the TC as a secondary network in the posts here. Look down the bottom of the discussion.
    https://discussions.apple.com/thread/4817218?tstart=30
    If any of that doesn't make sense just post again here..
    You can also do it with wireless if you accept using a USB wireless stick plugged into the Mac.. then you have two wireless clients and can connect simultaneously to two different networks.. using the same principles as above that you remove the gateway and dns problems that arise by manual settings.

  • Why does my iPhone 5 only connect to wifi when it's with in 5 feet of the server

    I Up graded to an i phone 5 s.  From a 4 and the 5 will only connect to the wifi at home when I am with in a few feet of the server my 4 worked all over the house and even in the back yard.  But now I can't even be in the hallway and keep connection.  Other. I phone 4s have a good connection throughout the house  and other iPhone. 5. Are the same as mine  it seems a s though there may be a poor quality  antenna on e new iPhone 5 s models and a lesser quality of a product  this seems to be a trend with iPhone  and it is very disappointing. Is there anything that can be done and also could you start building your newer products with better performance parts.  (If it's not broke don't fix it). I want my iPhone 4 back lol.    I have done a hard reset to resolve my issue and I have checked my wifI signal side by side with other phones and I pad.  Please let  me know if anything can be done thanks you

    if this is the case with all wifi routers then I would say that the wifi antenna of the iphone5 is broken or not connected

  • Can only connect one user at a time via VPN?

    Hi, long-term Mac user but new to OS X Server. Dug thru the forums quite a bit but couldn't find an answer to this one - hopefully I wasn't searching with the wrong keywords.
    Installed OS X Server 10.6 on a MacBook (white, 1 generation back) at the office. Sits behind an Airport Extreme, which is connected to Comcast. Other machines at the office are NOT routed through the Server, but rather connect directly to the Airport Extreme for internet access. I've set up server.mydomainname.com to point to our Comcast address, and I am able to connect via VPN to the server without any problems, and access the server using the server.mydomainname.com address which I pointed to my Comcast IP address, as long as I check "Send all traffic over VPN connection" on my client.
    However, when I'm logged in via VPN on one computer, and then log in via VPN on another computer (with the same UID or a different one), the first one loses all connectivity through the VPN - it's as if it had been logged off.
    In Server Admin, under the Settings|Network tabs, I have Computer Name set up as "theserver", and Local Hostname as "theserver" (so I can access via theserver.private). VPN is set up to enable L2TP over IPsec, sharing ranges 10.0.1.200 thru 10.0.1.220; no load balancing, no PPTP. Client DNS servers is set to 10.0.1.29.
    Any ideas as to why I can only connect with one client at a time?

    Thanks. I didn't see anything interesting, but then again I'm not up on VPN details. Here's the scenario:
    First, I logged in as "user1", and I can use the VPN.
    Then, I logged in as "user2", and I can use the VPN with user2, but user1 is no longer able to do anything over the VPN.
    Then I hung up with user2, but user1 still can't see anything over the VPN.
    Then I hung up and reconnected with user1, and user1 can use the VPN again.
    Here's part of the log for this activity. I've replaced potentially identifying info with "XYZ" for safety. Appreciate any thoughts on this!
    Tue Oct 19 07:33:08 2010 : L2TP received ICCN
    Tue Oct 19 07:33:08 2010 : L2TP connection established.
    Tue Oct 19 07:33:08 2010 : using link 1
    Tue Oct 19 07:33:08 2010 : Using interface ppp1
    Tue Oct 19 07:33:08 2010 : Connect: ppp1 <--> socket[34:18]
    Tue Oct 19 07:33:08 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:08 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:08 2010 : lcp_reqci: returning CONFACK.
    Tue Oct 19 07:33:08 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:08 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:08 2010 : sent [LCP EchoReq id=0x0 magic=XYZ]
    Tue Oct 19 07:33:08 2010 : sent [CHAP Challenge id=0x18 <XYZ>, name = "myserver.private"]
    Tue Oct 19 07:33:08 2010 : rcvd [LCP EchoReq id=0x0 magic=XYZ]
    Tue Oct 19 07:33:08 2010 : sent [LCP EchoRep id=0x0 magic=XYZ]
    Tue Oct 19 07:33:08 2010 : rcvd [LCP EchoRep id=0x0 magic=XYZ]
    Tue Oct 19 07:33:08 2010 : rcvd [CHAP Response id=0x18 <XYZ>, name = "user2"]
    Tue Oct 19 07:33:08 2010 : sent [CHAP Success id=0x18 "S=XYZ M=Access granted"]
    Tue Oct 19 07:33:08 2010 : CHAP peer authentication succeeded for user2
    Tue Oct 19 07:33:08 2010 : DSAccessControl plugin: User 'user2' authorized for access
    Tue Oct 19 07:33:08 2010 : sent [IPCP ConfReq id=0x1 <addr 10.0.1.29>]
    Tue Oct 19 07:33:08 2010 : sent [ACSCP ConfReq id=0x1]
    Tue Oct 19 07:33:08 2010 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
    Tue Oct 19 07:33:08 2010 : ipcp: returning Configure-NAK
    Tue Oct 19 07:33:08 2010 : sent [IPCP ConfNak id=0x1 <addr 10.0.1.213> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
    Tue Oct 19 07:33:08 2010 : rcvd [IPV6CP ConfReq id=0x1 <addr XYZ>]
    Tue Oct 19 07:33:08 2010 : Unsupported protocol 0x8057 received
    Tue Oct 19 07:33:08 2010 : sent [LCP ProtRej id=0x2 80 47 01 01 00 0f 01 0a 02 1b 63 ff fe a0 dd da]
    Tue Oct 19 07:33:08 2010 : rcvd [ACSCP ConfReq id=0x1 <ms-dns1 0.0.0.1> <ms-dns1 0.0.0.1>]
    Tue Oct 19 07:33:08 2010 : sent [ACSCP ConfRej id=0x1 <ms-dns1 0.0.0.1>]
    Tue Oct 19 07:33:08 2010 : rcvd [IPCP ConfAck id=0x1 <addr 10.0.1.29>]
    Tue Oct 19 07:33:08 2010 : rcvd [ACSCP ConfAck id=0x1]
    Tue Oct 19 07:33:08 2010 : rcvd [IPCP ConfReq id=0x2 <addr 10.0.1.213> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
    Tue Oct 19 07:33:08 2010 : ipcp: returning Configure-ACK
    Tue Oct 19 07:33:08 2010 : sent [IPCP ConfAck id=0x2 <addr 10.0.1.213> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
    Tue Oct 19 07:33:08 2010 : ipcp: up
    Tue Oct 19 07:33:08 2010 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: 10.0.1.29), current interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
    Tue Oct 19 07:33:08 2010 : found interface en0 for proxy arp
    Tue Oct 19 07:33:08 2010 : local IP address 10.0.1.29
    Tue Oct 19 07:33:08 2010 : remote IP address 10.0.1.213
    Tue Oct 19 07:33:08 2010 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: 10.0.1.29), current interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
    Tue Oct 19 07:33:08 2010 : rcvd [ACSCP ConfReq id=0x2 <ms-dns1 0.0.0.1>]
    Tue Oct 19 07:33:08 2010 : sent [ACSCP ConfAck id=0x2 <ms-dns1 0.0.0.1>]
    Tue Oct 19 07:33:08 2010 : sent [ACSP data <payload len 26, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name XYZ>]
    Tue Oct 19 07:33:08 2010 : rcvd [IP data <src addr 10.0.1.213> <dst addr 255.255.255.255> <BOOTP Request> <type INFORM> <client id 0x08000000010000> <parameters = 0x6 0x2c 0x2b 0x1 0xf9 0xf>]
    Tue Oct 19 07:33:08 2010 : sent [IP data <src addr 10.0.1.29> <dst addr 10.0.1.213> <BOOTP Reply> <type ACK> <server id 0x0a00011d> <domain name "XYZ">]
    Tue Oct 19 07:33:08 2010 : rcvd [ACSP data <payload len 0, packet seq 0, CI_DOMAINS, flags: ACK>]
    Tue Oct 19 07:33:34 2010 : rcvd [LCP TermReq id=0x2 "User request"]
    Tue Oct 19 07:33:34 2010 : LCP terminated by peer (User request)
    Tue Oct 19 07:33:34 2010 : ipcp: down
    Tue Oct 19 07:33:34 2010 : l2tpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.29), deleted interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
    Tue Oct 19 07:33:34 2010 : sent [LCP TermAck id=0x2]
    Tue Oct 19 07:33:34 2010 : l2tpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.29), deleted interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
    Tue Oct 19 07:33:34 2010 : L2TP received CDN
    Tue Oct 19 07:33:34 2010 : Connection terminated.
    Tue Oct 19 07:33:34 2010 : Connect time 0.5 minutes.
    Tue Oct 19 07:33:34 2010 : Sent 777000 bytes, received 105388 bytes.
    Tue Oct 19 07:33:34 2010 : L2TP disconnecting...
    Tue Oct 19 07:33:34 2010 : L2TP disconnected
    2010-10-19 07:33:34 PDT --> Client with address = 10.0.1.213 has hungup
    Tue Oct 19 07:33:50 2010 : rcvd [LCP TermReq id=0x3 "User request"]
    Tue Oct 19 07:33:50 2010 : LCP terminated by peer (User request)
    Tue Oct 19 07:33:50 2010 : ipcp: down
    Tue Oct 19 07:33:50 2010 : sent [LCP TermAck id=0x3]
    Tue Oct 19 07:33:50 2010 : l2tpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.29), deleted interface setting (name: ppp0, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.214).
    Tue Oct 19 07:33:50 2010 : L2TP received CDN
    Tue Oct 19 07:33:50 2010 : Connection terminated.
    Tue Oct 19 07:33:50 2010 : Connect time 3.5 minutes.
    Tue Oct 19 07:33:50 2010 : Sent 625383 bytes, received 225586 bytes.
    Tue Oct 19 07:33:50 2010 : L2TP disconnecting...
    Tue Oct 19 07:33:50 2010 : L2TP disconnected
    2010-10-19 07:33:50 PDT --> Client with address = 10.0.1.214 has hungup
    2010-10-19 07:33:59 PDT Incoming call... Address given to client = 10.0.1.216
    Tue Oct 19 07:33:59 2010 : Directory Services Authentication plugin initialized
    Tue Oct 19 07:33:59 2010 : Directory Services Authorization plugin initialized
    Tue Oct 19 07:33:59 2010 : L2TP incoming call in progress from 'XYZ'...
    Tue Oct 19 07:33:59 2010 : L2TP received SCCRQ
    Tue Oct 19 07:33:59 2010 : L2TP sent SCCRP
    Tue Oct 19 07:33:59 2010 : L2TP received SCCCN
    Tue Oct 19 07:33:59 2010 : L2TP received ICRQ
    Tue Oct 19 07:33:59 2010 : L2TP sent ICRP
    Tue Oct 19 07:33:59 2010 : L2TP received ICCN
    Tue Oct 19 07:33:59 2010 : L2TP connection established.
    Tue Oct 19 07:33:59 2010 : using link 0
    Tue Oct 19 07:33:59 2010 : Using interface ppp0
    Tue Oct 19 07:33:59 2010 : Connect: ppp0 <--> socket[34:18]
    Tue Oct 19 07:33:59 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:59 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:59 2010 : lcp_reqci: returning CONFACK.
    Tue Oct 19 07:33:59 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:59 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:59 2010 : sent [LCP EchoReq id=0x0 magic=XYZ]
    Tue Oct 19 07:33:59 2010 : sent [CHAP Challenge id=0xf1 <XYZ>, name = "myserver.private"]
    Tue Oct 19 07:33:59 2010 : rcvd [LCP EchoReq id=0x0 magic=XYZ]
    Tue Oct 19 07:33:59 2010 : sent [LCP EchoRep id=0x0 magic=XYZ]
    Tue Oct 19 07:33:59 2010 : rcvd [LCP EchoRep id=0x0 magic=XYZ]
    Tue Oct 19 07:33:59 2010 : rcvd [CHAP Response id=0xf1 <XYZ>, name = "user1"]
    Tue Oct 19 07:34:00 2010 : sent [CHAP Success id=0xf1 "S=XYZ M=Access granted"]
    Tue Oct 19 07:34:00 2010 : CHAP peer authentication succeeded for user1
    Tue Oct 19 07:34:00 2010 : DSAccessControl plugin: User 'user1' authorized for access
    Tue Oct 19 07:34:00 2010 : sent [IPCP ConfReq id=0x1 <addr 10.0.1.29>]
    Tue Oct 19 07:34:00 2010 : sent [ACSCP ConfReq id=0x1]
    Tue Oct 19 07:34:00 2010 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
    Tue Oct 19 07:34:00 2010 : ipcp: returning Configure-NAK
    Tue Oct 19 07:34:00 2010 : sent [IPCP ConfNak id=0x1 <addr 10.0.1.216> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
    Tue Oct 19 07:34:00 2010 : rcvd [IPV6CP ConfReq id=0x1 <addr XYZ>]
    Tue Oct 19 07:34:00 2010 : Unsupported protocol 0x8057 received
    Tue Oct 19 07:34:00 2010 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 02 1b 63 ff fe 99 35 cb]
    Tue Oct 19 07:34:00 2010 : rcvd [LCP ProtRej id=0x2 82 35 01 01 00 04]
    Tue Oct 19 07:34:00 2010 : rcvd [IPCP ConfAck id=0x1 <addr 10.0.1.29>]
    Tue Oct 19 07:34:00 2010 : rcvd [IPCP ConfReq id=0x2 <addr 10.0.1.216> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
    Tue Oct 19 07:34:00 2010 : ipcp: returning Configure-ACK
    Tue Oct 19 07:34:00 2010 : sent [IPCP ConfAck id=0x2 <addr 10.0.1.216> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
    Tue Oct 19 07:34:00 2010 : ipcp: up
    Tue Oct 19 07:34:00 2010 : found interface en0 for proxy arp
    Tue Oct 19 07:34:00 2010 : local IP address 10.0.1.29
    Tue Oct 19 07:34:00 2010 : remote IP address 10.0.1.216
    Tue Oct 19 07:34:00 2010 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: 10.0.1.29), current interface setting (name: ppp0, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.216).
    Tue Oct 19 07:34:00 2010 : rcvd [IP data <src addr 10.0.1.216> <dst addr 255.255.255.255> <BOOTP Request> <type INFORM> <client id 0x08000000010000> <parameters = 0x6 0x2c 0x2b 0x1 0xf9 0xf>]
    Tue Oct 19 07:34:00 2010 : sent [IP data <src addr 10.0.1.29> <dst addr 10.0.1.216> <BOOTP Reply> <type ACK> <server id 0x0a00011d> <domain name "XYZ">]

  • WRT45G: can only connect one pc at the time to internet, cannot login to router setup

    Hello,
    I don't get this. The complete network worked fine for ... years? After a call with the ISP about a general/different issue, we can now only connect one pc at the time to internet. (We were asked to take out cables and we've put them back).
    I've been trying and searching for an answer for hours.
    problem:
    We can only connect through the router to internet with only one pc at the time (the first pc we connect after starting up the router).
    Also we cannot get into the setup menu of the router at 192.168.1.1
    We've been trying to reset the modem for 10, 30 seconds.
    Auto resolve IP/DNS. DHCP is enabled.
    I also remembered that I pushed the SES button, it turned from orange to flashing bluish. I never knew aboutthis function, nor it is mentioned in the manual I downloaded. Now this SES indicator is off.
    Also WLAN and DMZ led are off.
    I downloaded EasyLink_Connect.exe, went through the setup. It recognises there's internet connection, but stops and says: cisco does not support this modem.
    Temp. replacing this WRT45G modem with another one did not resolve the issue.
    I have no clue what went wrong, what we did wrong, and how we can resolve this issue? Please help! Thanks
    Message Edited by Brammm on 11-27-2008 03:13 PM

    Okay! 
    1.  (results when having assigned a static IP) :
     Windows IP-configuratie
             Primair DNS-achtervoegsel. . . . .:
            Knooppunttype: . . . . . . . . . .: onbekend     (unknown)
            IP-routering ingeschakeld. . . . .: nee      (no)
            WINS-proxy ingeschakeld . . . . . : nee    (no)
     Ethernet-adapter LAN-verbinding:
             Verbindingsspec. DNS-achtervoegsel:
            Beschrijving . . . . . . . . . . .:
              VIA Compatable Fast Ethernet Adapter
            Fysiek adres. . . . . . . . . . . : 00-16-17-CE-D5-40
            DHCP ingeschakeld:. . . . . . . . : nee    (no)
            IP-adres. . . . . . . . . . . . . : 192.168.1.20
            Subnetmasker. . . . . . . . . . . : 255.255.255.0
            Standaardgateway. . . . . . . . . : 192.168.1.1
            DNS-servers . . . . . . . . . . . : 192.168.1.1
     (results without having assigned a static IP: automatic config.) :  
     Ethernet-adapter LAN-verbinding: 
            Verbindingsspec. DNS-achtervoegsel:
            Beschrijving . . . . . . . . . . .:
              VIA Compatable Fast Ethernet Adapter
            Fysiek adres. . . . . . . . . . . : 00-16-17-CE-D5-40
            DHCP ingeshakeld. . . . . . . . . : ja     (yes)
            Autom. configuratie ingeschakeld. : ja       (yes)
            IP-adres. . . . . . . . . . . . . : 84.30.99.32       
    Subnetmasker. . . . . . . . . . . : 255.255.254.0       
    Standaardgateway. . . . . . . . . : 84.30.98.1       
    DHCP-server . . . . . . . . . . . : 213.51.144.90
            DNS-servers . . . . . . . . . . . : 212.54.40.25
                                                212.54.35.25
    2.  I do have another router, when I try that one, the problem we have remains. So that's a bit strange to me. That one is supposed to be working.
    Does this SES function configure anything other than the modem? So, does it alter PC configurations? I have no clue.   We even start to wonder whether the ISP is able to set up their internet in a way that unables us to make use of a router? That would be ridiculous
    Message Edited by Brammm on 11-30-2008 04:03 AM

  • When importing tracks from a CD to iTunes, only 10 of the 13 songs are imported or shown on the list. How can I import the missing three?

    When importing tracks from a CD to ITunes, only 10 of the 13 songs are imported. How can I display and import the missing three? Thanks.

    It depends on eaxactly what is wrong with the old laptop. If you're lucky the drive can be extracted and connected to a new computer to extract the data. Otherwise see Recover your iTunes library from your iPod or iOS device.
    tt2

  • Why is my ipod touch 4g only connecting at 54 mbps?

    My ipod touch 4g has been slow here lately downloading apps and such. So I have an app that analyzes the wifi and it shows im only connecting at 54 mbps. I know the ipod touch 4g is able to connect to wireless n running at 150 mbps on the 2.4 ghz band. Why is it not using it? Is this why it's so slow? also my battery drains quick it seems. I just replaced my netgear wgr614 with a Belkin N600 DB for the dual band N now I know the ipod cant utilize the 300 mbps on the 5 ghz channel. I bought this router because the Ipad 2 needed it. My ipad 2 would cut out and drop signal in my bedroom now signal is great and stays great and it works on the 5 ghz channel. Long story short can't hook up no more tv's to my cable signal I have one tv and my cable modem on one splitter only one outlet in the whole apartment. I was told if I ran another tv it would kill the signal. So i figured get an Ipad 2 and use the Time warner app and watch live tv that way. It works like a charm now where as on my G router it would cut out and buffer a lot. I'm just trying to wonder why the Ipod touch 4g can't utilize the 150 mbps N 2.4 ghz band. Any ideas or anything I can do? I tried resetting network settings on the Ipod with no luck no change. My router is using WPA-2 PSK AES if that makes a difference. my internet is 10 meg with powerboost roadrunner. Also the wireless channels are on 1 and 6

    The % battery is not accurate.
    If a full charge only last 30 minutes after restoring to factory setting/new iPod that indicates a bad battery.
    Apple will exchange your iPod for a refurbished one with a new battery for $79. They do not fix yours.
    Apple - iPod Repair price              
    A third-party place like the following will replace the battery for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the battery yourself if you are up to it. You can purchase a replacement for about $10.
    iPod Touch Repair – iFixit

  • HT204409 I am unable to connect to my Wi-Fi at home, but am able to connect at work.  Using my new iPad 4G with cellular and a Motorola SBG6580.  My iPad 3G Wi-Fi only connects just fine; the 4G just "spins the gear."

    I am unable to connect to my Wi-Fi at home, but am able to connect at work.  Using my new iPad 4G with cellular and a Motorola SBG6580.  My iPad 3G Wi-Fi only connects just fine; the 4G just "spins the gear."

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for

  • ITunes no longer recognizes Outlook on my computer

    This morning, my system worked fine. After installing a supposed audio update, my computer has been acting up all day and I've been wasting hours trying to fix my computer and get iTunes talking to Outlook again. The iCloud menu on my Network and Sha

  • ITunes 7.4 won't recognize my library files

    I have all my music on an external hard drive and just changed from set playlists to smart playlists. I upgraded to 7.4 tonight and 1) It wouldn't import my library.XML file 2) Couldn't find my iTunes folder on the external hard drive 3) Erased all m

  • Arch on a 2007" MacBook 2,1

    I found these instructions but they are quite cryptic: https://wiki.archlinux.org/index.php/Ma - sion_2.2C1 Could anyone help break this down into a step-by-step for me? The machine currently has OS X 10.4 on it which I'm happy to jettison or keep si

  • After analyze report run slowly!!

    Dear all, please help me how is it happen I run this in sql DBMS_Stats.Gather_Schema_Stats('user'); and i expect the performance will be better than before but the real world the report was tak 30 sec it take now 15 minute (not all report but tow onl

  • Problem transport requests remain in queue

    Hello I have problem as transport requests remain in queue of QAS and does not advance in approwal list. Problem began  after /usr/sap/trans was full Now trnasport are imported correcly but remain in queue of QAS and does not advance in approwal list