Thunderbolt port color problems with panasonic plasma tv

I have a MBP 17" latest model. When I connect my Panasonic 50" Plasma via Thunderbolt to HDMI adaptor through a Western Digital 6TB Thunderbolt hard drive, the colour is very pink/purple. If I plug the HDMI adaptor to the Panasonic direct to the MBP Thunderbolt port, bypassing the hard drive port, the color is fine. Any solutions guys?

Did you find a solution to this issue? I have the same issue now after years of no problem using the mini display port to DVI through a drive.

Similar Messages

I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

Thunderbolt daisy chain problem with display

Hi to everybody,
being a proud new user of a thunderbolt audio interface Apollo Quad since a couple of days i am struggling to set it up without trouble for my secondary display in my Thunderbolt daisy chain...
My setup and connections
MBP Late 2011 17" 16GB RAM running Mavericks and UAD SW 7.11, 1 Thunderbolt port
Promise Pegasus R4 Thunderbolt RAID drive
Apple TB display
Second 26" display connected via DVI/Mini display port adapter
Erverything worked like a charm prior to inserting the TB audio interface with a Thunderbolt 2 Card into the TB daisy chain. Order of TB connections: MPB -> Apple TB display -> TB Audio interface -> Ext. display via DVI to TB connector.
Since putting the audio interface (Apollo) in the TB chain Apollo itself, TB display and Pegasus RAID run fine - but the last display behind Apollo only shows "invalid mode" blinking on the display. I tried changing the order of the devices, no change.
Has anyone an idea what to do?? - I have not exceeded the max number of TB devices (6) allowed to run in sequence. I read here in the forum that an ext display behind Apollo should work and has proven to do so. It has the new option card for TB2 inserted... Does the left/right port matter, which is connected to the display?
Thanks in advance for any help to get that sorted out!! The last option would be to go remove the TB card and run the Apollo per firewire as I need the second screen.. not the most convincing solution for me though.
Regards
Uli

Hi Ilya,
I am curious why it only happens for one particular Process Chain. Normally displaying a log has nothing to do with the client settings of SCC4 and/or system settings of SE06. My only guess is that it might be created in this system directly and that the system wants to modify anything here.
I am quite sure that the system is "closed" and it's not a Development system, e.g. a Production System. Please confirm.
Anyway, I have one suggestion and that is to check the Object Changeability in the Transport Connection. Go to t/code RSA1, choose the Transport Connection view and click on the push button Object Changeability.
Here you can see a list of Object Types like RSPT (Process Chain Starter), RSPV (Process Variants), PSPC (Process Chain). If it is set to "Not Changeable", I suggest to change that in e.g. "Everything Changeable".
Please try that with the above mentioned Object Types for Process Chain related Object Types and see if you are able to display the log w/o the pop-up.
You can also refer to SAP Note 337950 - Queries (including objects) cannot be edited for more information.
Thanks,
Sander

Color problem with ProPhoto RGB color space

Hi, everyone,
I have wery special problem I think. I use MacBook pro 15" with retina display, adobe Photoshop CC and when I export RAW (from Nikon D7000) from Lightroom 5 to Photoshop with settings: 16 bit TIF, color space: ProPhoto RGB I have a problem with displaying the correct colors. As you can see in this picture:
My problem are some "green" artefacts in absolutely black and white picture. I tried myself to solve this problem and found the following facts: when I convert picture into Adobe RGB or sRGB color space is everything OK - without green artefacts.
But here is one important fact: I have calibrated monitor by datacolor spyder4elite and problem with ProPhoto RGB incorrect color displaying is only when the color calibration configuration is loaded. When I change my display calibration to standard apple color LCD profile than is everything OK.
But using uncalibrated monitor and also Adobe RGB color space are no right solutions for me.
My question is why I have problem with displaying ProPhoto RGB color space in photoshop under calibrated monitor profile and can anybody help me please?
Thanks for answers.

That's a classic example of the basic problem with 16 bit color. There is no solution that I know of.

Port Mapping Problem with AEX

I have a new Airport Extreme and a problem that did not exist with the Airport. I connect a Toshiba network camera to an Airport Express, set as a WDS remote, with the netcam connected to the wired ethernet port of the Express. I can see the netcam, which also functions as a web server, on the internal 10.x.x.x address, and have reserved a discrete 10.x.x.x address via the MAC/DHCP reservation function of the Extreme. Just like the older Airport which did this without a hiccup, I should be able to map a port (e.g. 1200) on the public IP to port 80 of the internal 10.x.x.x address, then access the netcam on the internal network from any browser (http://67.x.x.x:1200). My cable modem is just that: no router involved other than the Airport Extreme. I'm using the latest Extreme and Express firmware, and am either missing something with the new Leopard firewall, overlooking something else, or dealing with a product flaw. Any help is appreciated and Happy Holidays.

I have forwarded the port (have tried several different ports actually) in what I think it the correct way: using the Airport Utility, connected to the Airport Extreme, and, under advanced options, selected port mapping, entered the public TCP port of 1200, then the private 10.x.x.x IP address of the netcam (which I can access from the internal network with no problem), coupled with the private TCP port of 80. I then attempt to access the netcam from the Internet by entering http://my cable modem IP address:1200 (or another port to which I've attempted to map). This method worked for two years with the Airport, but, with the Extreme and Leopard (simultaneous transition), I'm stumped. After reading other about other port mapping problems, I reserved an IP address for the netcam based on its MAC with no positive results. I also set the firewall through the Security icon in System Preferences to allow all incoming connections. Thanks for taking the time to respond.

Problem with Panasonic P50G20

We bought this tv yesterday, I got it all set up and I have problems with my HDMI, white flecks, like snow, and the sound cuts out. ONLY on HDMI channels, if I put in a dvd through a component cable, picture and sound are prefect. I disconnected the HDMI cable and plugged it into my 42" panasonic and picture and sound are perfect, so it isn't the new cable.
Ideas?

I have owned several Panasonic TVs, and they are usually great.
I know you are frustrated, but let's go back to the basics. Are you sure the HDMI cable is properly plugged into the cable/satellite box HDMI output? Next, most modern TVs have a bewildering number of inputs. Arguably the best quality nowadays is HDMI, so there will likely be HDMI 1, HDMI 2, and possibly HDMI 3. Most of us use HDMI 1 for the cable/satellite box, HDMI 2 for the blu-ray player and so on.
Next, on my Panasonic remote, there is the big circle with the arrows, and to the upper left of that circle is a button marked TV/Video. With the cable/satellite box and TV turned on, pressing this button brings up a menu for input selection. Use the arrows to move up or down the list to "HDMI 1", then press "OK".
I am sure this will fix your problem

Serious color problems with Lightroom

Hello,
I purchased lightroom this week and I am having a serious problem importing images. I am using a new Macbook Pro with OS Snow leopard. My camera is a Canon 1ds Mark2.
When I import files half of them have this awful deep orange cast over them.
If you look at the thumbnails some of the frames are normal and then the next few turn orange, all shot within seconds of each other in the same place, no WB change on the camera or anything. What is this, a bug in Lightroom? I dont experience this problem with Photomechanic or Photoshop.

It doesn't sound like you know what actually caused the problem. What happens if you 'delete' (i.e. remove from LR only) some of the previous "orange" pictures and try to reimport them into LR?
I understand that you are new to Lightroom – Welcome aboard! Your first step after learning the basic controls in LR is to adjust your 'Camera Default Settings' in the Develop module to better suit your workflow. I suspect you are using your camera with 'Auto White Balance' (AWB) set, which is inappropriate for RAW file format. Reason: If your LR Develop module white balance control is set to anything other than 'As Shot,' then pictures shot under different color temperature lighting will take on different color casts (i.e. orange, blue). The controls you have in LR (White Balance eye dropper) can help you to better determine the white balance settings for a particular shoot, and easily apply them uniformally across multiple pictures. This will provide better results than using AWB on any camera!
I use a ColorChecker Passport to create custom camera profile and white balance develop presets for 'Daylight,' 'Cloudy,' Tungsten,' etc. for each of my camera bodies. Therefore I never use 'As Shot' white balance setting, and never have this kind of problem. My default camera setting uses the ColorChecker custom 'Daylight' preset, which I can change to a different preset for any photo session that was not shot under normal daylight conditions. If you want good color control of your images, you should not rely on the 'Auto White Balance' setting on your camera (especially for JPEGs!). You don't need a ColorChecker to adjust your camera body's color temperature in LR, but it helps and also creates a full custom camera profile! I own three Canon camera bodies and they all produce slightly inacurrate white balance using LR's 'Daylight' white balance setting with high-noon sunny daylight pictures. I suggest you determine and create your own custom white balance settings in LR for daylight and then change your camera default to these settings. You can also create custom develop presets for Cloudy, Tungsten. etc., which can be applied to specific shooting sessions as a better "starting point" for white balance.
Do a little research on using Lightroom's White Balance Eyedropper tool – Here's one link:
http://help.adobe.com/en_US/Lightroom/3.0/Using/WS947672F1-AAB2-43de-9011-BDDECA05EC19.htm l

My computer crashes when I export from Premiere Pro cc.? Also, is there a known problem with Panasonic HC-V720 footage?

Why does my computer crash when I try to export from Premiere Pro cc? Also, is there a known problem with footage from Panasonic Hc-v720?@

Ask in http://forums.adobe.com/community/premiere/content
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

Color problems with previews

during my 30 day trial of LR, LR developed a problem with the color displayed of any files(jpeg or raw) that I imported into the program. the reds and oranges seemed to be way over saturated .if I exported the unedited file to any other location the photo would look fine. if I edited the file to look right when I exported it it looked way off. I was loving the way the program worked for the first week but it became unuseable after that. Im using a canon 40d and the problem occures when importing directly from the camera or fron any folders on my pc running xp .... any thoughts???

>Odd how it could look fine with windows and others but really off with LR.
None of the others typically color manage, so they don't use the profile. Also, a large number of the icc profiles that are shipped with display drivers for windows ar corrupt out of the box (really strange but true) so you're usually better off just deleting them. That said, if you want good color you basically have to actually calibrate. Using sRGB is a very bad alternative. You need to calibrate using real calibration hardware for good color and use color managed apps wherever you can (Lightroom, Photoshop, Safari, Firefox with the secret setting enabled, but NOT internet explorer or windows picture viewer. They never show you the actual color.

ThinkPad USB 3.0 dock network port has problems with our Cisco 6509 switch

We purchased a ThinkPad USB 3.0 dock for and X1 carbon and the main issue we are having is the network port does not seem to work with our Cisco 6509 switch. I tried updating the firmware on the dock but it still hasn't fixed the issue. I was wondering if anyone else had run into this problem with any other networks out there.

I'm seeing the same issue with a ThinkPad W520. When I connect my ethernet cable directly to the laptop, my internet speeds are on par with my service provider of 18 Mbps. When I move that cable to the dock, I will only see 1.5 Mbps. I have two displays attached to the dock and I'm running Windows 7. I've updated the dock firmware and have installed the latest system drivers. Is there anything else to try?

Poweredge (Win 2003) port teaming problem with Cat 6509s

Hi
One of our server guys has reported a problem with port teaming his Win 2003 Dell servers (running MS Exchange). He has set them up with an active port attached to 6509-A and a standby port attached to 6509-B. The servers have Broadcom NICs. At times the server is completely unavailable - unable to RDP or telnet and users have complained of poor performance.
Does anyone hae any experience - any info gratefully received.
Regards,
Paul

I'm not so sure CSCsj55739 is the issue. I have a few questions:
1) Can you post a text dump of the Broadcom team config (usually available from the teaming GUI).
2) Are both NICs connected to the same VLAN?
3) Is this same VLAN carried between 6509-A and 6509-B?
4) Have you tried removing the team and putting the team address on one physical NIC at a time, to see if simply one NIC or the other has a connection issue?

Bizarre color problem with macmini

I just bought a mac mini intel. And have it hooked up to a JVC hdtv with DVI-DVI.
In some windows. Everything is blue and yellow. No reds show up. But it's completely erratic.
For instance: On the dock, all logos look fine. When I launch front row (just the opening screen) everything is blue and yellow.
Most photo's go blue and yellow in iphoto. but display fine in front row sometimes.
The open, close, minimize logos are always the correct colors. Even if the info within the window is not.
This is not a monitor problem. Or a cable hookup issue. It's either software/color profile. Or hardware.
Do anyone know how to fix this? Apple is clueless.

That's a classic example of the basic problem with 16 bit color. There is no solution that I know of.

Problem with Panasonic P2

I am new to this forum and hope someone can help me.
I shot video by Panasonic AG-HVX203 to shoot video in DVCPRO HD (1080/50i) format. This is PAL format. Video is stored in P2 card. And then I import the MXF files to the timeline of Premiere CS4. After edited, by the Dynamic Link sent to Encore which Project Preset is PAL 1440x1080 25.
With Encore, transcode the video with 1440x1080 25 Maximun Quality. And then Build "Blu Ray Disc Image". Finally, burn this Disc Image file to Blu Ray disc.
Play back this disc with Panasonic Blu Ray player BUT find out that the video resolution is 576p!!
I checked my workflow and tried many times to build different Disc Images. But all blu ray disc is played back only with 576p quality.
I want to create a blu ray disc with 1080i quality. What did I do wronly in my wrokflow? Could you help?

1. Try encoding to Blu-Ray (mpg2 or H.264) from Premiere using your 50i settings.
2. Check the file after encoding to be sure it is 1440x1080 50i.
3. Then start Encore and create a new HD project. Check under FILE, PROJECT SETTINGS that you have Blu-Ray selected with PAL 1440x1080 50i.
4. Next import the Blu-Ray files you exported from Premiere into Encore.
5. Burn your Blu-ray disk.
Hope this helps.

Connexion problem with Panasonic DV-PAL camcorder

Hi,
I have a problem to have FCE HD 3.5.1 or iMovie 5 recognize my camcorder since I updated to MacOS X 10.4.11 from 10.4.10. At the startup of FCE the message "cannot find the Apple FireWire PAL (720x576) driver" appears and the application does not recognize the camcorder. iMovie cannot recognize it either.
I have read on the forum that some people already had this kind of problem with the firewire when they switched to 10.4.11. Do you know how to solve it ? May it work better with Leopard?
Thanks for your answers, Christophe

I don't have another firewire device connected to the computer. From the history of updates I can see that the first one for QT was an upgrade to version 7.0.3 in November 2005 (together with an upgrade to OS X 10.4.3), but I can't remember whether it was an upgrade from QT 6 or 7. The update of OS X was from 10.4.0 because it was upgrading from the original PowerBook G4 CD install.
When you say reinstall QT, do you mean removing it and reinstalling it completely?

MacBook external display problem with Panasonic projector

MacBook (September 2006, Intel 945) with Boot Camp and XP Pro won't display externally from Boot Camp to a Panasonic PT-DW5000U projector using VGA (via the MiniDVI-to-VGA adapter/dongle). I tried 640x480x8-bit and 800x600x16-bit and 1024x768x16-bit. I tried unplugging and replugging the adapter. I tried shutting down and restarting into Win XP while all video cabling was connected. I tried pressing F7, Fn+F7, Shift+F7, FnShiftF7, as well as other key combinations involving F7. I tried checking the checkbox called "Extend my Windows desktop onto this monitor." I installed Apple Software Update 2.1. None of these troubleshooting attempts worked. It works fine in OS X to the same projector (using the same VGA dongle). And, while Win XP starts in Boot Camp, the projector displays the Windows XP startup screen (black background and blue progress indicator), but after about a minute that disappears, I get a login dialog on the laptop screen, and the projector then displays only a blank blue screen.
Other displays: It works fine with Boot Camp to a Samsung SyncMaster 940T monitor using DVI (via the MiniDVI-to-DVI adapter/dongle). It works fine with Boot Camp to a Panasonic LC50 monitor using VGA (via the MiniDVI-to-VGA adapter/dongle).
We also have Panasonic PT-D5500 projectors, but I haven't tried them yet.
1. Is this a problem in the Intel drivers supplied with Boot Camp?
2. Are there settings on the projector that need to be set to make it work?
3. I'm also now missing the Intel system tray icon that looks like a slanted computer screen -- how do I get it back?
Any suggestions? Thanks!

Based on the substantial research I've done regarding this issue, here's what the problem could be (without me knowing more):
If your working with an integrated graphics card (Intel 945?), chances are that it doesn't support the "resolution" of the projector - which is information embedded in to your other devices. Furthermore, the "refresh rate" is another piece of information usually "embedded" in to the device your connecting to, and the projector may not have either piece of information accessible to your card, or, vice versa.
Additionally, the drivers required by XP to make it all happen while using your particular video card, may not be installed. Basically, it could be a driver issue as well.
I wish I had a solution for you, however, everything I've read seems to conclude that XP within boot camp has little or no support for external displays (especially when talking about larger resolutions).
Humorously, when I addressed the "Mac Genius" at the Apple Store regarding this question, he told me to go buy a PC - so I did. Already have a Mac Pro, needed a laptop...

Thunderbolt port color problems with panasonic plasma tv

Similar Messages

Maybe you are looking for