Thunderbolt port - MDP fitting doesn't fit

I've just purchased a MacBook Pro 13" to replace a stolen MacBook.
The port to connect to an external display has changed but everywhere seems to say my existing Mini DisplayPort cable will still work but it's a completely different fitting. 
I'm very confused, Please HELP!!

janeypie wrote:
I had a MacBook before but it was bought back in 2008.
thanks for your info... I'll let you know if it works out!
Ok, that connector will not work. You are going to need to buy a new one. Make sure you get one that fits a mini displayport or Thunderbolt.

Similar Messages

  • I have an 11" MacBook Air.  When I plug in my VGA adapter to my Thunderbolt port, the computer doesn't recognize it ... unless I reboot the computer.  Is there another way to get the computer to recognize the adapter?  (It works with my MacBook Pro)

    I have an 11" MacBook Air.  When I plug in my VGA adapter to my Thunderbolt port, the computer doesn't recognize it ... unless I reboot the computer.  Is there another way to get the computer to recognize the adapter?  (It works with my MacBook Pro)

    Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
    If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
    -USB-to-VGA
    http://www.cablestogo.com/product/30545
    -Convert s-video or composite video signals to high resolution VGA
    http://www.cablestogo.com/product/40971
    The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
    el7

  • Has anyone had a problem with thunderbolt cables not fitting properly?

    I recently purchased an UA Apollo Duo interface. It is thunderbolt equipped. The thunderbolt cables either fit super tight in the interface or not tight enough on the macbook. In fact it fits so poorly on my macbook that the slightest jiggle will disconnect the interface! Not good. The thunderbolt ports on my macbook have been unused up to this point so its not a matter of them being worn out.
    I'm surprised this wasn't more standardized.

    Not here;  updated three systems without issues.
    Can you provide more details on your system specs, the projects you're referring to, and what kind of behavior you're encountering?
    Russ

  • Anyone else having trouble connecting MBP with thunderbolt port (TBp) and 27"iMac with mini display port (MDp)

    I have a 27" Imac.i7 with mini displayport and MBP13 i5 with thunderbolt port. Some time ago I tried to connect my old MBP with miniDP  to The 27"iMac I Failed so did the apple centre they refunded cable costs and said I'd be contacted by Cupertino. That was 9 months ago, now replaced MBP with 13 inch(**** I can use my iMac as display!). Does not work phoned Fast Lane very helpful guy called JIM emailed me some software/firmware update links.  Still no display linking. One of the links was for a couple of updates for a TBp equiped 27" iMac mine is only MDp equiped. Failing to find any MDp updates in apple support.  Anyone have any Ideas!  My lad has a later 27"i5 he uses Xbox 360 no problem on his but it wont look at my MBP.
    Beginning to feel like some of the kit that went with a fully loaded 5500 worked eventually. Computer and FM radio, Photography kit fine, video capture audio capture forget it.  Too many crashes and resets made it impractical. 

    Check discussion from  Linc Davis  on this thread
    Problems with Preview
    Similarly preview hangs opening files

  • Why doesn't the new time capsule have a thunderbolt port?

    it seems absurd apple wouldn't have put a thunderbolt port on the new time capsule.....what am I missing here?

    It is a network device.. there is no local connection.. and never has been. Thunderbolt chipsets are super expensive still.. which is why the cheapest external thunderbolt drives are still far more expensive than USB3.
    If you put a thunderbolt into the TC it is then a local drive and no internet connection.

  • Connecting Cinema Display with mini display port to macbook pro with thunderbolt port

    I am trying to connect a 27" cinema display (2010) that has a mini display port cable out of the back, into my macbook pro (2013) with thunderbolt ports.  The mini display port cord fits into the thunderbolt port on the Macbook Pro, however the macbook pro does not detect the cinema display and the cinema display does not have any picture on the screen.  The USB plugs in fine and sound comes out, and I have the adapter for the magsafe to magsafe 2 and that works fine, it just the actual display.  Any help would be appreciated!
    Thanks!

    Hello mmholt,
    Welcome to Apple Support Communities.
    It sounds like there’s no video on an Apple Cinema Display that’s connected to your MacBook Pro, and you’re wondering if the configuration is supported. It is supported, take a look at the article linked below for more information.
    Thunderbolt ports and displays: Frequently asked questions (FAQ) - Apple Support
    1. Can I connect a Mini DisplayPort monitor or monitor using a Mini DisplayPort adapter to a Thunderbolt port on my Thunderbolt-equipped Mac?
    Yes. A Mini DisplayPort display or a display connecting with a Mini DisplayPort to VGA, DVI, or HDMI adapter will work just like it was connecting to a Mini DisplayPort connector when plugging in directly to the Thunderbolt connector on your Apple computer. Click here for more information on Mini DisplayPort connections and adapters.
    Also, this article provides a lot of great information and troubleshooting tips that will resolve most issues related to video external displays.
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    So long,
    -Jason

  • What cable do I need to connect a 2nd Monitor from the thunderbolt port?

    Hi I have got one of the brand new iMac's with thunderbolt ports - what cable do I need to connect my Imac to a 2nd display either VGA or DVI - also is there a budget version about as well as I am sure its going to cost a lot from the apple store     

    Thanks I understand that I need another cable and have that from when I connected my old PC to the 2nd monitor.
    http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY  - is this the one I need if going to DVI
    I just dont want to waste more money on a cable that says its for an imac to 2nd screen and find it doesnt fit
    For info my iMAC is the latest version (27" with the 2 thunderbolt connections and 1 firewire)
    Thanks

  • Thunderbolt port to Mini Display Port to HDMI problem

    Ok.. I figured it out (after reading another post of 44 pages of solutions/non-solutions and complaints starting back to 2009 and trying some) It seems as though a simple fix was missing....  I did this and it works just fine...
    I have a 27' imac. I used the Thunderbolt port on the back to a MDP to a HDMI to my 55" Vizio HD 1080p TV. It didn't work until......
    I called my Boeing engineer son-in-law (who is a very part time mac person (but very smart!) and he had me go to (SEE steps below!)........
    I did this and it works just fine...
    HERE IT IS STEP BY STEP!!!
    1.Open SYSTEM PREFFERRENCES click DISPLAYS. A window opens that will say your mac on the top of the window (mine said- iMac).
    2.Then....click ARRANGEMENT (there will be 2 little blue screens inside--1 portrait and 1 landscape view) and check MIRROR DISPLAYS.
    3.Now a second window opens with the name of your other display (mine said- VZ55.....which is my TV)  (the two little blue screens will now be overlapping).
    4.Then go to DISPLAYS on same window and choose your RESOLUTION.
    5.Now arrow pack on window to SYSTEM PREFFERRENCES
    6.Click SOUND and click on whatever your other display is (mine was VZ55....). 
    7.Choose your resolution (mine was 1080p) and ****POOF****  there it was.... my computer on my TV!!!
    WALLA!
    I hope this will help a lot of you! Good Luck All! 

    Shoudl try deactivating "Automatic graphic switching" from "Energy" pane of system preferences ...
    As said on the following : http://forums.macrumors.com/showthread.php?t=1297176

  • Mini Display port DVI adapter not working on Thunderbolt Port

    For some time I've been using a mini display port to DVI adapter on an slightly older MBP to connect to my HD TV.  I recently purchased a MBP with a Thunderbolt port and when I try to connect it to my TV via my mini-display-port-DVI adapter things are not working properly.  The MBP is seeing the Philips TV but it isn't listing all the display modes and I'm not able to send any video to it.  Does the Thunderbolt port require a new display port to DVI adapter?

    Let me be clearer; I've got the MDP-DVI adapter connected to a cable that is DVI on one end and HDMI on the other.  I've got both laptops so I can compare side by side.  I plug in the MDP-DVI adapter to the old laptop and all works well; I plug it into the new laptop and while the laptop does see the TV, the display modes for it are all 1080p which is wrong I don't see any desktop image on the TV unlike when I plug it into the older laptop.  This is very disappointing as I expect things to just work with Apple products.

  • How can I test my thunderbolt port? It's not working after the update to 10.10.1

    I have been using my computer with the Thunderbolt Port for a while and after updating to 10.10.1 and after I while of using my computer I tried to use the thunderbolt port with my external monitor.. and it doesn't work at all.. video doesn't come out.. I tried a different screen with the mini adapter from thunderbolt to HDMI and another with thunderbolt to VGA and in both adapters I don't get video from my mac.
    Any idea how can I test my Thunder bolt port?
    This is what I have done:
    1 cable adapter thunder bolt to mini HDMI to an LCD screen with HDMI : No video, but my computer detects that there is something connected
    2 cable adapter thunder bolt to VGA to an LCD screen with VGA : No video, but my computer detects that there is something connected
    3 cable adapter thunder bolt to mini HDMI to an 40' TV with HDMI : No video, but my computer detects that there is something connected
    All the test pass from the Hardware test at the startup (press D at boot time).
    Any ideas? my guarantee it's expired and no coverage. Due the nature of where the port it's installed, if this is a hardware problem seems that I will (may be) have to buy the Logic Board.. no good. No bueno!!
    Thanks!!!

    restore iPhone

  • 2011 mini-thunderbolt port to monitor not working

    I have a 2011 i5 Mini which I am using as a media server - hdmi port to my tv and the Thunderbolt port to my 1920x1080 monitor.  The problem is with the Thunderbolt port.
    I understood that I could use a Mini Displayport (MDP) adapter and go to the monitor either as VGA or DVI.  Hooked up the MDP-VGA adapter and all was good for the last couple of weeks:  both the monitor and the TV works and the monitor also worked fine with the TV off.
    However, today, the monitor wouldn't show a signal.  Figuring it was the cheap monitor, it pulled it and hooked it to a 2010 mini and it worked correctly with dvi and vga.  Put it back on the 2011 Mini and tried a MDP-DVI adapter, but no joy.  Image came on the monitor for perhaps 2 seconds and then disolved to just white noise.  Re-booted with same result.
    Pulled the HDMI cable that was going to the TV and used the supplied HDMI to DVI adapter to the monitor and it now works, but now I can't use the TV.
    I am assuming that this is a trip to the Apple store for warranty work unless anyone has an idea to try.  BTW, the 2011 MIni is fully up to date according to Software Update.
    Thanks, all.
    Peter

    Solved the problem with a new dvi to mini-display port cable from amazon.  My 2 adapters must be bad.
    Peter

  • Thunderbolt and MDP to VGA Adapter Compatibility Issue?

    Hi Veterans,
    I know this topic have been asked a lot of times by different people who faced the issue in different way. However, i am unable to find an absolute solution to the problem i am facing currently.
    My question is, can a 3rd party made, Mini Display Port to VGA adapter works on MBP & iMac that have mini display port and not on those that have thunderbolt port??
    I have a 3rd party made, Mini Display Port to VGA adapter that i have tried on 3 apple PC / laptop,
    A MacBook (13-inch, Late 2009) which comes with Mini DispayPort, the adapter work with this laptop.
    A iMac (21.5-inch, Late 2009) which comes with Mini Display Port, the adapter work with this PC too.
    A MacBook Pro (13-inch, Late 2011) which comes with Thunderbolt port, the adapter does not work with this laptop. I have tried many solutions i can find on this forum and none helped.
    The software is fully up-to-date as of 30 April 2013, running Mac OS X 10.7.5 (Lion).
    Tried safe mode, does not helped.
    Tried the boot up when monitor is already switched on procedure, does not helped.
    In all cases, it was tested on the same external monitor. As my MBP was dual-booted using Bootcamp assistant 4.0, i also tried in windows-mode (windows 7) which didn't work too. In windows mode, the screen just keeps flickering while in mac-mode i get a light blue screen. In both cases, the external monitor shows nothing. The external monitor is a Compaq FP7317 monitor with native resolution 1280 x 1024 at 75.0 Hz.
    All these trying have leave me very perplexed. From my research, the thunderbolt port is suppose to accept devices meant for mini display port. So how could an adapter that work on mini display ports, not work on a thunderbolt port? Can any expert enlighten me?

    Problem solved. I picked up the MDP to VGA adapter and was able to use the monitors native res of 1920x1200 but the flicker and wavyness made it impossible to use. And yes the adapter had the current firmware. But what I discovered in the process was that in mirror mode I am unable to drive the monitor at optimum resolution. With that in mind I tried the MDP to HDMI adapter again, unchecking mirror mode, moving the Finder bar to the external display and SHAZAM. I have a rock solid display external display now running at 1920x1200 : )

  • Can I use my macbook pro mid 2012 as an external display using thunderbolt port

    Hi,
    I want to use my macbook pro (mid 2012) screen as an external display for a raspberry pi using a HDMI to Thunderbolt cable, via the thunderbolt port on the macbook pro. Would this be possible? Can the macbook pro's thunder bolt port act as an input and is any additional software required?
    I look forward to hearing from you.
    Thanks in advance!

    Welcome to Apple Support Communities
    You are referring to Target Display mode. Target Display mode can only be used in 27-inch iMacs and iMacs with Thunderbolt, not MacBooks Pro > http://support.apple.com/kb/PH11302
    Unfortunately, you can't use the MacBook Pro as a display. It doesn't support the monitor mode

  • I have a new (mid-2011 27" Imac with 2 Thunderbolt ports each driving one 27" Thunderbolt display. The 3 displays work perfectly in OSX Lion but in Bootcamp 4.0 with Windows 7 (64 bit) only 2 screens come up. everything is up to date. Anyonce who can help

    I have a new (mid-2011 27" Imac with 2 Thunderbolt Ports each driving one 27" Thunderbolt display.
    Graphic card is AMD Radeon HD 6970M  with 2Gb of VRAM.   All works 100% in Lion but
    in Bootcamp 4.0 running windows 7 Professional (64 bit) Only 2 of the 3 screens work not all three.
    Tried updates, calling Apple etc. But no luck.  Windows doesn't recognize the 3rd screen while
    checking on the driver in windows is tells me it's the latest and best available. ?  In VMware
    Windows 7 also works fine over three screens so windows can do it. But I need it natively to
    work. (i.o.w. in Bootcamp). Does Anybody know how to solve this, or if Apple is working on a
    solution for this ?  It really hurts to have one of these expensive screens staring at you being dead.

    I have a new (mid-2011 27" Imac with 2 Thunderbolt Ports each driving one 27" Thunderbolt display.
    Graphic card is AMD Radeon HD 6970M  with 2Gb of VRAM.   All works 100% in Lion but
    in Bootcamp 4.0 running windows 7 Professional (64 bit) Only 2 of the 3 screens work not all three.
    Tried updates, calling Apple etc. But no luck.  Windows doesn't recognize the 3rd screen while
    checking on the driver in windows is tells me it's the latest and best available. ?  In VMware
    Windows 7 also works fine over three screens so windows can do it. But I need it natively to
    work. (i.o.w. in Bootcamp). Does Anybody know how to solve this, or if Apple is working on a
    solution for this ?  It really hurts to have one of these expensive screens staring at you being dead.

  • Does Yosemite support DisplayPort 1.2 to daisy-chain 2 monitors from a single Thunderbolt port?

    Has anyone tried daisy-chaining two monitors from a single Thunderbolt port in Yosemite? DisplayPort 1.2 wasn't supported by Mavericks, but I'm hoping that might have been fixed with the new

    Visibly not... I try daisy-chaining with my Dell U2414H on Yosemite but it doesn't work. Please Apple, Fix this...

Maybe you are looking for